IPod touch can be set to turn on/off automactic with car when pluged to the document cig lighter.

Similar Questions

• My 1st generation iPod touch can not save on my iMac El Capitan but can to my MacBook Snow Leopard ' 08. Why the iMac think that the backup is corrupt?

  Of course, I'm using my iMac El Capitan, but when I bought the music today and went to add to my iPod touch iTunes ended up freezing. Long story short, I could delete the files from the iPod but can not add one; Adding a single song led to suspended iTunes and the cancellation of the synchronization via the iPod of course makes no difference.

  After going through all the rigamarole any attempt to delete all backups for iPod, both through preferences and in/Library/Application Support / MobileSync / Backup, I always had the same problem. I can't add music on my iPod via the iMac, nor can I save it there. Yes, I rebooted.

  And so, after many tears, I pulled out my MacBook ' 08, who narrowly missed the cut for El Capitan and so still has Snow Leopard. And now my iPod backed up very well! (I cursed myself for not to copy previous backup before it was replaced, but hey.) They are all under the same Apple ID, so at this point, I'm simply redownloading all of my new purchases on the ol' MacBook ' so I can add it to the iPod... but how long this will be a viable solution? (I realize using products Apple since 2008 is an affront, but you've got to do what you do I do, and I don't currently have pocket for 32 GB change.)

  So the question. Is there an incompatibility of software between my 1st generation iPod touch (3.1.3) and my iMac (El Capitan with iTunes 12.3.2.35 10.11.3)? Is there really a degree of corruption here than Snow Leopard with iTunes 10.6.8 11.4 (18) does not recognize?

  TL; Dr: I can do my iPod touch backup of my iMac?

  (My apologies for what is the format, I still haven't managed to brevity, and these a few hours researching in it made me frustrated).

  Edit: I forgot to mention that I tried to copy on the backup freshly prepared from the MacBook on the iMac and received the same exact error message.

  See:

  Sync 1 G iPod touch with iTunes 12.3

• Every time when you open the document in Adobe reader, it will open 'tools' (export - life - pdf, pdf, pdf - luo - etc.). Every time I have to manually turn this off. How I can inhibit this tool? I don't really want to, and he stole my display space. How

  Every time when you open the document in Adobe reader, it will open 'tools' (export - life - pdf, pdf, pdf - luo - etc.). Every time I have to manually turn this off. How I can inhibit this tool? I don't really want to, and he stole my display space. How to inhibit?

  I have little display and allways this "life pdf", 'luo pdf', 'pdf-tiedostoa muokkaa', 'commentary', etc. appear. How I can inhibit this junktool?

  Go in Edition > Preferences > Documents and uncheck "Open tools for each document pane.

• How can I set my own level of text with fonts, sizes etc.

  How can I set my own level of text with fonts, dimensions etc. instead of the default one?

  Is that what you want to do?

  Adobe Premiere Elements help. Apply styles to the text and graphics

• I can't transfer photos from iPhone to MacBook Air. When I opened the Photos on a Mac, there is no tab 'import' alongside the actions, projects, Albums. iTunes is up to date. File menu does not appear iPhone

  I can't transfer photos from iPhone to MacBook Air. When I opened the Photos on a Mac, there is no tab 'import' alongside the actions, projects, Albums. iTunes is up to date. File menu does not appear iPhone

  The "import" tab appears only when the iPhone is connected to the Mac via a USB port.

  ITunes detects your iPhone when it's connected?

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• COMPUTER CRASHED AND CANNOT ACCESS IT TO TURN IT OFF.  I TRY TO SIGN IN THE PROGRAMS THAT I DOWNLOADED ON A COMPUTER FROM 3.  WHAT DO I NEED TO DO?

  COMPUTER CRASHED AND CANNOT ACCESS IT TO TURN IT OFF.  I TRY TO SIGN IN THE PROGRAMS THAT I DOWNLOADED ON A COMPUTER FROM 3.  WHAT DO I NEED TO DO? I ALSO USE COMPUTER #2

  Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 can help

  -read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

• My laptop continues to turn upside down, left or right when I press the left/right click or even move my screen a little.

  My laptop continues to turn upside down, left or right when I press the left/right click or even move my screen a little. My problem is not how to go backwards, his way to completely stop it help please?

  Original title: windows 4540 s probook

  Hello

  What version of Windows are you using?  Windows 8?

  Right-click on the desktop > select screen resolution

  Uncheck allow the screen to auto-rotation

  Click OK

  Using the keyboard:

  Winkey + O (letter alpha) is to switch the feature off or on

• Since the upgrade to Windows 10 and Creative Cloude 2015 (about the same day...), my pen (Intuos 5 Touch) is so much trolling and does more work with it. I downloaded the latest drivers. What should do? Thank you, Dany

  Since the upgrade to Windows 10 and Creative Cloude 2015 (about the same day...), my pen (Intuos 5 Touch) is so much trolling and does more work with it. I downloaded the latest drivers. What should do? Thank you, Dany

  Hi Dan,.

  Please ensure that your Pen drivers are up-to-date. (check the manufacturer's Web site)

  Also, what exact version of Photoshop and Lightroom are you using?

  Search for graphics card drivers update as well.

  Kind regards

  Assani

• Hello, I have version Adobe Acrobat 11. I have complete documents and send them to customers. However, when customers open the documents on their side, they are empty. The filled information are missing. Can you please help me with this problem?

  Hello, I have version Adobe Acrobat 11. I have complete documents and send them to customers. However, when customers open the documents on their side, they are empty. The filled information are missing. Can you please help me with this problem?

  Why are publish you again? You must first answer the question I ask in your original thread.

• My iPod Touch is not fully charge/Turn On

  Hello

  Not exactly what the iPod touch generation that was a gift from a friend in 2009.

  Yesterday afternoon, I realized that it was completely out of charge, but do not plug in until early this morning.

  I plugged the charger around 06:20 this morning and now (12:30), he does not always light on. It is clear to me that it is recognizing the power cord being plugged - it shows me the screen with the Red battery symbol and the symbol with the lightning and then back and forth between it and the logo apple - as he tries to start, but can't you make it quite there. I tried to do a manual restart, and it will pop up with the icon of Apple, usually for a long time - 5-10 minutes and then come back to do what he was doing before. I don't know if I should keep just to load and reload. I tend to spend long periods of load between the two, so I don't know, I ran the battery down a little, but usually it recharges fairly quickly - in an hour or two. And if I unplug the cord while the apple logo is at the moment, it is not closed immediately or whatever this is - it seems like there fee in there now. If I unplug it while the Red battery icon is in place, it will pop up with a screen asking to connect me Heck back in. Maybe I just need more patience?

  Thanks for any advice you may have!

  Are plug you into a wall outlet or a computer?

  Plug it rather directly on the wall for 10-15 minutes and see if it boots. Sometimes the computer is not give it enough juice if the battery is completely dead and it needs more power. This can make the cycle of "reboot, restart, die, die" you see.

  Maybe try another cable as well?

  Good luck!

• How can I set up new tabs to open with my homepage?

  When I open a new tab, the display shows "You have opened a new tab"... informative but not particularly useful... Can I set it so the new tab opens to the home page of google?

  https://addons.Mozilla.org/en-us/Firefox/addon/NewTabURL/

• How to set up a local administrator account with elevated privileges, but without the rights of local access connection

  I want workstation installation a Windows 7 where regular users only have power user rights, because I do not want that they either accidentally change important settings or for malicious to be processes able to run Web sites. However that these will be remote users there maybe times when they need a local administrator account to allow them to perform installation, correction or updating. So, I created a local user account, added to the Administrators group and used the Panel of local security policy and the account added to the list "Deny log on locally '.

  It works by refusing the admin account to connect directly. However when I log in under the power user account and run something that requires elevated privileges the admin account is refused to carry out the process.

  What is the combination of security settings can I refuse a desktop session Admin account but allows it to be used for processes requiring elevated privileges?

  Thank you!

  Hello

  Thank you for contacting Microsoft Community.
  This is quite normal. When you refuse the privileges of local access connection, local users can not use the administrator account information because it is be the local login. So, it is better to create a domain and restrict the use of administrative operations to the administrator.

• Can't add placeholder text data merge for all blocks of text on the document

  I'm trying to put together a script that loops if all pages in an indesign file, search all text frames label caption1, caption2, caption3... (whenever you get to a new page, the number of text images label starts again from 1) and add a placeholder in the text data fusion: caption1, caption2, caption3... but this time, when you get to a new page the number continues to go... caption4, caption5 and so on.

  Page 1 - image text = caption1 = tag > data merge placeholder = < < caption1 > >

  Page 1 - image text = caption2 = tag > data merge placeholder = < < caption2 > >

  Page 1 - image text = caption3 = tag > data merge placeholder = < < caption3 > >

  page 2 - text = caption1 = image tag > data merge placeholder = < < caption4 > >

  page 2 - image text = caption2 = tag > data merge placeholder = < < caption5 > >

  Currently, the script is adding placeholder text merge data only for the two text frames first (out of 6) on a page (about 8 pages) and just the first image of text on the page two (out of 3)

  Any help will be greatly appreciated

  Here's the script:

  myDocument var = app.activeDocument;

  -SOURCE DATA CALLS FUSION

  main();

  main() {} function

  myDataSource var = File.openDialog ("Please select a datamerge source", "text files: * .txt");

  If (myDataSource! = null) {}

  myDocument.dataMergeProperties.selectDataSource (myDataSource);

  myDocument.dataMergeProperties.dataMergePreferences.recordsPerPage = RecordsPerPage.MULTIPLE_RECORD;

  }

  }

  -MERGE OF DATA FIELD

  function get_field (captionString, myDocument) {}

  fields var = myDocument.dataMergeProperties.dataMergeFields;

  for (var f = 0, l = fields.length; e < l; f ++) {}

  If (fields [f] .fieldName == captionString) {}

  Returns the fields [f];

  }

  }

  Alert ("error: did not find all the fields with the name" + field_name);

  }

  THE TEXT - ADD PLACEHOLDER DATA MERGE

  var countFrames = 1;

  for (i = 0; i < myDocument.pages.length; i ++) {/ / TOTAL NUMBER OF PAGES in the DOCUMENT}

  var capPerPage = 1;

  for (x = 0; x < myDocument.pages [i].textFrames.length; x ++) {//COUNT TEXT TOTAL IMAGES PER PAGE

  If (myDocument.pages [i] .textFrames [x] .label < 0) {}

  Alert ('can not find any image caption');

  } ElseIf (.textFrames [x] myDocument.pages [i] .label == 'caption' + capPerPage) {//IF IT IS A TEXT LABEL of IMAGE 'caption1' EXECUTE

  var captionString = "caption" + countFrames;

  var myTextFrame = myDocument.pages [i] .textFrames [x];

  var myDataMergeProperties = myDocument.dataMergeProperties;

  var myTextFrame.parentStory = monarticle;

  var myStoryOffset = myTextFrame.parentStory.insertionPoints [-1];

  var myNamePlaceHolder = myDocument.dataMergeTextPlaceholders.add (monarticle, myStoryOffset, get_field (captionString, myDocument)); ADD DATA FUSION TEXT HOLDER TO THE TEXT BLOCK

  countFrames ++; INCREASE THE NUMBER TO ADD DATA FUSION TEXT PLACEHOLDER FOR THE NEXT BLOCK OF TEXT

  capPerPage ++;

  }

  }

  }

  Hello

  To verify this change (replace for...) loop)

  var countFrames= 0, currLabel, capPerPage;
  
  for (i=0; i
  Notice countFrames starts at 0.
  Jarek
  		   

• How can I get updates in real time in multiple views when scrubbing through the timeline?

  I use After Effects CS 5.5 on Windows 7. When I use the mouse to click / drag / scroll the timeline, a real-time updated view, it's great! If I open a second point of view, it does update this notice when I finished the scrolling.

  I would like to be able to scroll back the timeline and update in real-time (live update) has two different compositions?

  Is this possible?

  Thank you!

  The long answer is: No. it isn't even a matter of performance, this is how AE evaluates the time, because the time is fluid and can be truncated to 1 million ways to time remapping to expressions...

  Mylenium

• Fixed a 529584 bug is not desirable; can I set a setting to turn it off?

  I created an entry in my address book to address mail to myself. The entry has 'self', then my email address. After the fix 'development', several places have received messages that I sent to myself! Because when I started typing "is" autocomplete gives me a bunch of possible addresses, and "self" is not the first.

  I had specifically used "self", because no other address started with
  

  "themselves". I would like to disable the new feature, or overcome somehow. Is this possible?

  AutoComplete matches now against any part of the name or email address (bug 529584)

  Instead of "self", try a combination of unique characters who would not, serve as "yasmine", that is easy to type.