iPod touch generation 5 does nothing when connected to the computer

Similar Questions

• How long it take restore iphone when connecting to the computer

  How long it take restore iphone when connecting to the computer

  Is based on the amount of data to restore. How long do we have?

  GB

• Canon PIXMA MG5220 Photo-All - in - One Printer - my printer print when connected to the computer, but not when it is wireless

  Window indicates that my new printer Canon PIXMA MG5220 Photo All in One Printer is compatible with my Dell Inspiron E1705, my printer prints so that connected to the computer but when I try to print wireless, it does not work. The printer is wireless and I have a wireless cable modem, what am I I lack to the printer wireless?  Please advise.

  Hi LouiseFarmer,

  It seems there is a problem in the basic WIFI the printer setting.

  I suggest you show the manufacturer's Web site to learn more about the drivers and the printer setting to print via WIFI.

  http://USA.Canon.com/Cusa/consumer/products/printers_multifunction/photo_all_in_one_inkjet_printers/pixma_mg5220#MiscWirelessHelp

• IPhone shows not all photos when connected to the computer

  I have an Iphone 5, with more than 800 photos in my camera. When I connect my phone to the computer and open DCIM, happens with 100APPLE, with only 46 photos in the folder, and that's it. I tried to use google reader to get photos from my phone by downloading the app on my phone, but when I tried to add the files it only came with the same 46 photos. I also had a problem where I can't delete photos on my computer when I'm in the Apple folder, and my photos come upwards with one! in a circle in my albums and I'm unable to send them anywhere, and when I click on them, they start to load (as they look blurry when there is the!) but never finished loading. I'm not sure if this is related to the problem, but it could limit. Thank you for your help.

  Here you will find a few troubleshooting steps If you can not import photos from your iPad, iPhone or iPod touch to your computer - Apple Support

• iPhone not charging when connected to the computer via USB

  Original title:

  I use windows 7, when I connect my iphone to laptop, it does not load .i don't know it's because of device drivers not installed.when I connect my phone to another laptop its load.  Thank you

  Hello

  1. are you facing problems with USB devices?

  2. that you get an error? If Yes, what is the exact error message?

  3. is your phone detected in iTunes?

  4. doesn't Windows detect the iPhone as storage medium?

  5. are you aware of any changes made to the computer, before the show?

  Method 1:

  Run the hardware troubleshooter and check the issue.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Try to plug it into a different USB port and verification.

  Method 3:

  Check out the following link.

  iOS: device not recognized in iTunes for Windows

  http://support.Apple.com/kb/TS1538

  I hope this helps.

• No display on TV when connected to the computer

  Original title: Laptop windows 7 to a standard tv

  There is no picture when I connect my laptop to my standard tv. The manufacturer of the cable said she would connect both the hdmi port to connect rca on my TV.

  Hey ulvera,

  Please find the instructions to connect your TV to the computer in the article below.

  Step 1:

  Connect your computer to a TV
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  Step 2:

  Additionally, make sure that your video card has the most recent drivers.

  For more help with drivers, see:

  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• iPhone buzz custody when connected to the computer

  When I plug my iPhone to the laptop it just keeps buzzing and I can't access it from the computer

  You use a 3rd party usb cable?

  '

  Or the cable usb is bad.

• esxcfg-nas - d does nothing when lance in the cron script

  Hi all

  Here's my test code (/ tmp/test.sh):

  unit of fusion-mu/vmfs/volumes/admin_nfs & gt; & gt; /tmp/Watcher.log

  esxcfg-Sin - d admin_nfs & gt; & gt; /tmp/Watcher.log

  esxcfg-vmknic - d "IP storage" & gt; & gt; /tmp/Watcher.log

  esxcfg-vswitch - D vSwitch0 "IP Storage" & gt; & gt; /tmp/Watcher.log

  RM-f /etc/cron.d/test.job

  This is going from cron, then the script removes the cron job, it's the output of the cron log (to show that it works!)

  August 25 at 08:35:01 xxx crond [10870]: (root) CMD (/ tmp/test.sh)

  Output of the log created by my test script file:

  # cat watcher.log

  #

  The output of watcher.log is always empty (but it is created when the script is run). My NFS connection remains and so does the news of IP storage.

  If I run the script manually, I get this result:

  #./test.sh

  # cat watcher.log

  NAS admin_nfs deleted volume.

  #

  Why it does not cron?  (I added to cron as root)

  Bit confused... help me!

  have tried to use the absolute as path "/ usr/sbin/esxcfg-nas" in your cron?

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• Error, "DNS server does not" when connecting to the internet.

  IAM using windows 8 and iball netsetter. But I can not connect net. When I use mobile connect its connection. But in netsetter, it is not connected. Error troubleshooting network as "DNS server not responding do not. Help, please

  Try changin public DNS dns...

  How to change the address of the DNS public IPv4 DNS server in Windows?

  http://answers.Microsoft.com/en-us/Windows/wiki/windows8_1-networking/how-to-change-IPv4-DNS-server-address-to-public/56548e8d-eb9c-4FC5-807C-eefca5d278d0

• AutoPlay option does not appear on Canon SX130 when connected to the computer

  Original title: No auto play box

  AutoPlay box does not now appear for my canon sx130 (there over a year before). Just change of trend - tech off Norton Norton 360 but still no box - this only happens on this particular camera, others work very well.  I have Vista

  Hello

  Thank you for your response.

  According to the error code, I suggest you to uninstall the drivers of the camera from the Device Manager and search for new hardware reinstall the driver.

  Follow the steps below and mark the question:

  a. open the Device Manager, in the device properties dialog box, click the driver tab and then click on uninstall. Follow the on-screen instructions.

  b. restart your computer.

  c. open Device Manager, click Action, and click Scan for hardware changes. Follow the on-screen instructions.

  For reference:

   

  Open the Device Manager:

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

   

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us by following the steps above.

• USB device not recognized when connected to the computer

  original title: USB port problems

  When I plug a usb device, I get a message not recognized usb device (one of the usb devices attached to this computer has malfunctioned and windows does not recognize)

  Hello

  ·         Since when are you facing this problem? Were you able to use this USB device on the system before?

  ·         Remember to make changes to the system?

  ·         It happens with all USB devices that try you to plugin for the system?

  I suggest running the fix which is present in the article below and check if the problem persists.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  Also, I suggest you return the item mentioned below.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• Sansa E280 going to update the database when it is connected to the computer

  Hello

  Just at the moment where I was getting things straightened on my drive and everything was working fine, I plugged my E280 on my computer and it says "Refresh database" on the player and my computer does not see the E280.

  I've been looking around on the forum, and there are so many different options to try (of: delete the SYSTEM folder, which I was told not; to turn off the drive and engaging the hold button and the button to rewind when connecting to the computer, etc., which I tried ~ nothing; take off Firmware and put one on; do something in Recovery Mode) , which I have no idea how do; etc.).  Sorry, but I hope you get my point... What do I do?

  Thanks for any help once more.

  Thank you clu31355.  I tried the very first thing that you said ' put in operation and allow it to update the database (if desired) before you connect. "and voila - it worked.

  These Sansas seem to be quite ticklish - who knows what will happen?

• Cannot delete files and music always there but not display upward when I connect to the computer?

  Hi all

  Recently, I had a lot of problems with the music does not or don't play not I decided to delete all my e260 music and start again.  That's where the real problem started.

  For some reason I can't delete three of the albums on my player.  Each of the albums have what appear to be corrupted in them files. My computer does not recognize the file type and file extension is given so I don't know what they are.  Each file "appears" to 4 GB in size but that may not be appropriate for my e260 is obviously only 4 GB in size!

  Whenever I try to delete them I get an error message reading "cannot delete file: cannot read the source file or disc»

  I tried to update the firmware, reset e260 to factory default settings and made 'restore' thingy (where you hold registration and plug it into the computer, etc.) and these files are still there.

  After reading this thing of disk checking on this forum, I did this.  I was then able to remove two of the albums, but when I tried to delete the third album renamed 'a' and the damaged file shows 0 bytes in size, but I still can not remove.  However, I can move it to the folder music to any other folder.  I just can not remove!  When I do, I get an error message saying "cannot delete f: cannot find the file specified. '.  Be sure to only specify the path and the correct name.

  After all that I started my e260, and now I find that 2 other albums are always on it, even if they do not display any where when I connect it to the computer.  I can see and read these albums on the drive, and they seem well, they do not appear to be there when I plug it into the computer and look for them in windows Explorer.  The music folder is not hidden also.  These two albums are not part 3 albums that I could not remove, they are actually part of the new substance started sort of all these problems with the music does not and is not only now that they are the display upwards and play but are not appear when connected to the computer!

  I know it's probably not a lot of information but can someone tell me how to fix this?  If not, can I just format the * bleep * thing or I'll then have an e260 dead?

  See you soon,.

  PKFFW

  PS: Sorry for the long windedness of this post.

  Format will not remove the firmware, which is the operating system of the Sansa. It removes only the content that you have added. It will go back to what it was when it was new out of the box.

  MTP does not matter if you have never used it. The ghost album can be just a list remains in your database file. Nevertheless, we must get rid of this corrupt file, so Format is probably your best option.

  For what it's worth, to connect with the PSG, your computer needs Windows Media Player 10 or 11 is installed. XP comes with WMP 9, so he will not see the Sansa in MTP mode. unless you have updated.

• iPod Touch generation 5 will not 'sleep' mode

  Anyone having problems with the last iOS 9.3.5 where your iPod Touch in WITHOUT entering the mode 'sleep'?  The battery on my iPod Touch is draining that if she is constantly the same after pressing the button stop/market/sleep.  My battery down to almost 0% and I have to force a reboot (hold Home and on/Off/sleep button together for 10 sec) is to wake up when connecting to the iTunes.  Anyone have any idea how to force the iPod mode 'sleep'?

  The iPod's sleep if you do not have "SLIDE TO POWER OFF" and the screen is empty, except that you can play audio with white screen.

  Your iPod to sleep is based on the definition of sleep?

  When he sleeps depending on the settings you have defined, the iPid can do things in his sleep like audit and udating apps, mail

• Hai, my ipod shuffle when it is connected with the computer, it flashes organge light.  If I don't take no light

  Hai, my ipod shuffle when it is connected with the computer, it flashes orange light.  If I remove without light and music.  Even I kept connected all day with my laptop for charging.  But without success.  Is it possible to change the battery?

  If the shuffle still appears in iTunes when you connect, you can try to do a restore using iTunes, where the cause is a software problem.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  If the problem reoccurs after the restoration, it's probably a battery worn.  Need soldering skills to replace yourself, and iPod shuffle (with the exception of the 1st generation) is very small.  Not easy to work on.  This web site has repair guides

  https://www.iFixit.com/device/iPod_Shuffle

  and parts are available from sources like eBay.

  Apple 'serve' the shuffle, if it's the 4th gen (current type).  Rather than change the battery of your device, you get a replacement unit.  According to this document, out-of-warranty fees are $39

  Pricing of the Service - The Apple iPod Support

  NOTE: If your shuffle is less than one year of the date of purchase, it is under warranty.

  The retail price of a brand new 4th gen iPod shuffle, with new headphones, docking cable and warranty of one year is $ 49.