IPS-4240 engine upgradation procedure of E3 E4

Hi all

Can someone help me to upgrade the IPS 6.0 (1) 7.0 E1 (2) E4.

What are the images need to be upgraded for this?

What is the appropriate procedure for upgradation?

Here is the version for your reference results show...

========================================

Cisco IPS #.

Cisco-IPS # sh ver
Application partition:

Cisco Intrusion Prevention System, Version 1.0000 E3

Host:
Domain keys key1.0
Definition of signature:
Update of the signing S479.0 2010-03-19
Virus update V1.4 2007-03-02
OS version: 2.4.30 - IDS-smp-bigphys
Platform: IPS-4240-K9
Serial number: JMX1244L0PK
License expires: December 31, 2010 UTC
Sensor time is 211 days.
With the help of 1439252480 of 1984552960 memory available bytes (72% of use)
the application data uses 44.0 M off 166,8 M bytes of disk space available (28% of use)
startup is using 39.7 M off 68.6 M bytes of disk space available (61% of use)

MainApp to E-2008_OCT_16_16_24 (release) 2008-10-16 T 16: 40:57 - 0500 Running
AnalysisEngine-E-2008_OCT_16_16_24 (release) 2008-10-16 T 16: 40:57 - 0500 Running
CLI-E-2008_OCT_16_16_24 (release) 2008-10-16 T 16: 40:57 - 0500

Upgrade history:

* IPS - GIS - S465 - req - E3 23:00:43 UTC Thursday, January 28, 2010
IPS-GIS-S479-req - E3.pkg 00:05:37 UTC Wednesday, April 7, 2010

Version 1.1 - 1, 0000 E3 recovery partition

Valid certificate from the host: November 17, 2008 to November 18, 2010

Cisco IPS #.

Cisco IPS #.

=================================

Kind regards

Anuj Pratap

No, do not reimage system (IPS-4240-K9-sys-1.1-a-7.0-2-E4.img), which would eliminate all of your configuration.

Just perform the upgrade using this upgrade file: IPS-K9-7, 0-2 - E4.pkgand which would automatically be updated to 7.0.2 (E4).

Tags: Cisco Security

Similar Questions

  • The Upgrade Version of the engine on IPS-4240

    Hello

    I'm running a sensor IPS 4240 with engine Version 7.0 (1) E3 and the sensor will always have a strong canvassing from 97 to 98%. It's recommended to update the sensor to the latest version of the engine, considering the amount of load top right now?

    Thank you

    Kiran

    Hi Kiran,

    You need to update the engine at it, since you cannot use the latest signature definitions without being on the latest engine.  As long as you don't see packets ignored at the level of the interface of detection, it is fine for the use of the CPU which is high.  If you start to see rejected the packages that you need to reduce the amount of traffic being sent to the probe or reduce (by clearing and retreating) the number of signatures inspection of the traffic on the sensor.

    Best regards

    Justin

  • AIP - SSM upgrade procedure

    Hello world!

    I have version 8.2 ASA5520 (1) with module AIP-SSM-20

    and I want to put AIP-SSM-20 software version 3,0000 E3 to E4 2.0000

    I go to the download site and see the following list:

    Intrusion Prevention System (IPS) recovery software:

    • IPS-K9-r-1.1-a-7.0-2-E4.pkg

    Release date: March 29, 2010

    IPS Recovery Image File

    Intrusion Prevention System (IPS) Signature Update:

    • IPS-GIS-S481-req - E4.pkg

    Release date: March 31, 2010

    E4 Signature Update S481

    Intrusion Prevention System (IPS) system software:

    • IPS-SSM_20-K9-sys-1.1-a-7.0-2-E4.img

    Release date: March 29, 2010

    Image system IPS-SSM_20 file

    Improved Intrusion Prevention System (IPS) systems

    • IPS-K9-7, 0-2 - E4.pkg

    Release date: March 29, 2010

    File upgrade 7.0 Major of IPS (all supported except AIM - IPS and NME - IPS platforms)

    • IPS-engine-E4-req-7.0-2.pkg

    Release date: March 29, 2010

    The IPS E4 engine update

    I'm a little confused by the number of files and you want to ask what the procedure/sequence I should follow to upgrade?

    This is the file that you want to use to upgrade:

    Improved Intrusion Prevention System (IPS) systems

    IPS-K9-7, 0-2 - E4.pkg

    Upgrade:

    (1) download the file 'IPS-K9-7, 0-2 - E4.pkg' through IDM

    (2) IDM--> Configuration--> sensor--> sensor update management--> choose update is located on the client--> choose file 'IPS-K9-7, 0-2 - E4.pkg'--> hit the button "Update".

    It will take some time (about 20 minutes) to upgrade the sensor, so don't panic if it does not return to the top 'UP' status immediately.

    Hope that helps.

  • IPS 4240 - additional card

    Hello

    Does anyone know, when will be available 4xFE cards for IPS-4240 (for total 8 interfaces)?

    Kind regards

    Krzysztof

    The option card for IPS-4240/4255 sensors will be a card 4GE to support copper (RJ45) and fiber (SX) connections. It will allow a total of 8 RJ45 interfaces or 4 SX fiber interfaces (and 4 RJ45 interfaces) on these platforms. Unfortunately, it will be probably available for another 9 months or more.

  • IPS-4240 design question

    I have two IPS 4240 s that can be placed between our internal network and our extranet firewall. The game of firewall is your pair of standard assets/ASA-5520 switch connected to both switches.

    Q1 - if I'm not worried about atomic attacks, is there another advantage that IPS inline on promiscuity?

    Is Q2 - If inline or promiscuity, necessary to connect the unique IPS for two switches in order to receive packets when a failover of the SAA occurs? If so, does physically or through RSPAN?

    Q3 - if the IPS fails and it is set online, interfaces fail open (traffic continues to pass) or closed (traffic is removed)? I couldn't find that on the Cisco site.

    Thank you!

    "Promiscuous" mode, you can use a 4240 and extend the output of each switch in two interfaces of remote sensing of the 4240 (it has four available). A single 4240 should even be able to set up TCP sessions that span the two rails, as in the case of a failover.

  • Deployment of Cisco IPS 4240 devices

    I can't find all the information about the Cisco IPS 4240 features massive deployments. I have 6 devices, I intend to drive to several remote sites and tie in a centralized unit of Cisco MARCH. Without the help of any CSM/LMS software, is there a quick and dirty to pull this off? I think to set up a single IPS appliance, then pull and distribute the configuration file for the remaining devices. I would like to see how others have done this...

    If all of your sensors are of the same type (all 4240 to your situation) and will execute all the even correct configuration, then the copy command will help out you.

    There is a new feature added to the copy command in IPS 6.1 which will help you during the copying of config of one sensor to another.

    Complete you configure a sensor (using IME, IDM or CLI). When you are satisfied with the configuration, and then use the command copy to copy ON a server of SCP.

    Now bringup a second sensor and configure basic networking through the Installer settings (ip address, gateway, etc...).

    Now, use the command copy to copy the first configuration of sensors from the SCP server in the running of the second probe configuration on the second.

    It will ask you to change the network settings on the second probe.

    Answer n °

    The rest of the configuration of the probe first copy will be placed in the second sensor.

    The second sensor will keep its own unique IP address but win the rest of the configuration of the config of the first probe.

    Continue to do this with additional sensors.

    The process can then be repeated every time that additional changes are made to the first sensor.

    Remember though that this only works if the configuration of the probe will be exactly duplicated (including what interfaces would be monitored and how).

    If each sensor will have some unique tunings, then you need to manage each sensor on its own or buy CSM which can be used to share only parts of the configuration of multiple sensors.

  • IPS-4240 fail open

    Hi all

    I have one unit of IPS-4240. I want to know if my sensor or the unit itself fails / stops, is there an option where in my traffic will be passed so that there is no downtime.

    Thank you

    Pratik

    You can configure the sensor when it is inline with inline-bypass 'auto' mode mode so when the unit does not work, it will just pass through traffic without inspection, however, if the sensor is completely shutdown, then no, the traffic will be dropped when in inline mode.

    Here is more information on derivation inline mode:

    http://www.Cisco.com/en/us/docs/security/IPS/7.0/Configuration/Guide/CLI/cli_interfaces.html#wp1047079

    However, if she is in promiscious mode, so you don't have to worry about this because the package is not "inline" and will cause no disruption.

    Hope that helps.

  • Not entirely taken TLS supported in Cisco IPS 4240

    I am trying to contact a Cisco IPS 4240 device while having security settings FIPS enabled on the client using SSL. This is not possible because the device does not support TLS extensions in the Client Hello packet (RFC 5746) sent by the client when using TLS (SSL3 and lower are not FIPS compatible). The IDM application that communicates with the device does not send these extensions (im seeing this with WireShark) TLS is able to connect to it.

    Is it possible to provide the 4240 support these TLS extensions?

    This is related to the bugs below.  The original solution will be included in the 7.1.5 release which is preparing to take in charge the platform 4240 among others.  This will allow the Web server IPS to ignore short-term extensions.  The long-term solution will require an update to the Web server so that it is fully compliant with RFC 5746.

    http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtt18382

    http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtx43502

    Todd

  • Recommended Solaris Package upgrade procedure

    We would like to know the recommended Application Package upgrade procedure. We followed the procedure as defined in the Application Packaging Developer's Guide.

    Currently, we have followed the following procedure during the upgrade:

    1. check if the old version is available.
    2. If it is available, run the pkgrm command to remove the old package as indicated in the Application Packaging Developer's Guide. But because the package names are the same and we execute the pkgrm since the script preinstall, in some systems, command is not allow to remove the old package because it is run from scope of pkgadd command. The following error message if poster during package verification step is performed
    [audit class < none >]
    pkgadd: ERROR: entry into the content file to < / opt/XXXXxxxx/jre >
    3. we cannot manually delete the old package first because it will completely delete the file. We need to migrate some files of the old version again. Therefore, the old files during the upgrade.

    Please suggest a suitable procedure to handle this.

    What exactly do you do? You mean the Oracle Forms running Solaris or upgrade upgrade $somethingelse on Solaris?
    If you want to upgrade anythinge else then forms this is the wrong place to ask for help:

    SQL> r
      1  begin
      2    if 'Oracle Forms' = 'Oracle Solaris' then
      3      dbms_output.put_line('This is the RIGHT place to ask');
      4    else
      5      dbms_output.put_line('This is the WRONG place to ask');
      6    end if;
      7* end;
    This is the WRONG place to ask
    
    PL/SQL procedure successfully completed.
    

    See? My database tells me that it is in the wrong place, so it must be true: p

    You can choose one of the forums of Solaris:
    http://forums.Oracle.com/forums/category.jspa?categoryID=303

    And please include information such as the Version of Intel platform and what exactly you want to do it again as well.

    see you soon

  • IPS Signature engine

    Hello

    In database verification IPS signature, I noticed that there is an engine named column.

    A few signatures are other atomic IP normalizer, I don't know if there is a third value.

    But what the values mean?

    Another question, if a signature Action is set to "block the attacker inline" it doesn't block the attacker IP address for a right to an hour?

    Also is there a way to know, IPS, which are the Group of IP addresses blocked for an hour and when?

    First of all, let me clarify the differences between the actions of blocking and to refuse :

    block - relies on an external device, such as a firewall or a router, to implement the action via a shun or entry ACL

    deny - executes the action directly on the sensor IPS, requires that the sensor is configured for inline operation

    All the output in the output of 'see the network access statistics' refers to the actions of block . "AllowSensorBlock" is a parameter that allows the sensor IPS add IP of its management to a blocking action sought; This is not usually recommended.  To set the time-out for the blocks to stay active you'd use the 'global-block-timeout' command in the CLI:

    sensor# configure terminal
    sensor(config)# service event-action-rules rules0 
    sensor(config-rul)# 
    sensor(config-rul)# general
    sensor(config-rul-gen)# global-block-timeout 30
    The timeout is specified in minutes.
  • IPS-4240 Sig Update License

    Is this not the right part. the update of the GIS 4240 IPS license?  CON-SUSA-IPS4240S

    I can only find this part number in the ordering tool: CON-SUI-IPS4240, which also has a SMARTNet Support?

    What is do we need just to have updates of GIS?

    Thank you

    You cannot buy a stand-alone appliance IPS IPS subscription.

    You can buy either of the following:

    (1) CON-SUI-IPS4240 for example which includes Smartnet for hardware, software, and the IPS subscription.

    OR /.

    (2) CON-SUSA-IPS4240 contracts are sold only to customers who have purchased a support hardware and software through a reseller/partner contract.

    CON-SUSA... cannot be sold on its own, it must be sold in conjunction with the reseller/partner support contract.

    Hope that helps.

  • IPS 4240 high availability?

    Hello

    4240 running in HA mode?

    Or should I look at 4255 if I need to work in HA mode?

    Kindly help me with this info... Thanks in advance.

    Kind regards
    RAM

    Just to add a little bit to Bob's response.  It is possible for the HA, but as mentioned above, it is not HA as you would expect of a firewall and requires significant network planning and is rather technical in nature.

    The best documentation I could find about the designs HA is in chapter 21 - "Deploying Cisco IPS for high availability" and High Performance of Earworms security CCNP 642-627 official Cert Guide, ISBN: 9780132372107.  She gets quite detailed and explains a large number of different methods.

    I was also able to find some information on this site, but it is at a higher level and does not provide as many options.

    https://www.NetworkWorld.com/community/node/18384

    I had to work HA in some of our environments, and I'm here to tell you, plan ahead, far in advance, test several methods to find one that suits.  We were using a method that I just couldn't find it mentioned anywhere.

  • Upgrade to Sierra: restart upgrade procedure (free space)

    Hello

    today I tried to upgrade El Capitan in Sierra, after restarting the installation said that there is not enough free space left. Therefore, I changed the boot volume on my system disk and initialized in El Capitan.

    How the upgrade process restarted after deleting old files?

    The spectacle of the App Store of only Sierra is loaded.

    see you soon

    Gregor

    Hello gregor gregor gregor.

    Thank you for using communities of Apple Support. It's my understanding you are needing help with upgrading to Sierra, as the Mac App Store gives more the possibility to download. I want to assure you that you can upgrade and enjoy Sierra successfully.

    If you quit the Installer do not click on continue, you can open it later in your Applications, Launchpad or Spotlight folder. Looking for a file named Install macOS Sierra. During the installation, your Mac may restart several times. It performs then a few initial configuration in the background tasks. Although these tasks are ongoing activities such as the use of Spotlight or Mail may not seem as fast as they were before.

    How to get macOS Sierra

    Have an amazing day!

  • Why can't the upgrade procedure be re-scheduled to warn users BEFORE they upgrade they will lose the additional features they have relied on for years? This isn't a trivial matter - read the other "complaints"!

    For the second time in my experience, an update of Firefox led to a lost feature where the modules are considered incompatible. It is UNACCEPTABLE that the user is not warned prior to this loss. It is immaterial that the Add-ons are third parties: If Firefox can 'discover' the problem AFTER the upgrade, it can warn us BEFORE the upgrade. I love Firefox, but you've already lost one of my sons as a user because of what it sees as a casual disregard for the personal choices of the users. Give us the ability to customize Firefox. Fantastic! Can paralyse us when we innocently do a upgrade. How much more of your user base that you want to lose?

    As a user of long date of Firefox (and Netscape), I tend to agree with you that some type of compatibility check must be done before the real Firefox takes place version upgrade. I never install a new version of Firefox on my previous version. I admit that I'm a more experienced user and generally start to use new versions of Firefox during the beta test period and install the beta version, with a separate profile required, to test the new product and test the compatibility of the add-on. I know that's not possible or convenient for all users.

    The following extension can save you some frustration.

    • It adds an option "Empty list" on the screen Add on
    • It will show compatible Mozilla products and versions for each Extension.
      • I do not believe that the Extensions installed from other sites that the site Mozilla Add - ons are included; you will need to check the site from which you downloaded the Extension or with the developer of the Extension for the updating of the plans for the new version of Firefox.
    • I installed it and I use it as a first step before contacting the developers Extension and or visit their home/forums pages looking for beta versions of their Extensions for new versions of Firefox.
    • This will help you if you do not allow automatic updates of Firefox; most versions of news (e.g., Firefox 3.x of Firefox 4). See:

    Extension list Dumper: https://addons.mozilla.org/en-US/firefox/addon/extension-list-dumper/

  • ACS 5.3 to 5.6 upgrade procedure

    Can someone tell me how to upgrade ACS from 5.3 to 5.6. We need to install the patches available, or we can do it directly.

    Help, please!

    Kind regards

    David

    Hello Santosh,

    Please see the Upgrade Guide.

    http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/cisco_secure_access_contro...

    Let me know if you have any other doubts.

    Kind regards

    JAI Ganesh K

Maybe you are looking for

  • Page of Bing yesterday filled the entire screen; no icons, bookmarks.

    Yesterday, all of a sudden, the 'Bing' page lists of Firefox. No icons; No favorites. Even the URL of the site is visible only when I dragged out of the upper part. Now, it is impossible to come and go to my site by email to my other programs such as

  • FPGA. What tool xilinx for Crio-9022 &amp; 9030

    Hello. I will be compiling the programs of fpga on the Crio-9022 and 9030. You need Xilinx different compilers to do the task? With the help of LV ver14 CRIO-9022 requires xilinxs 14.7 tool? CRIO 9030 requires the xilinx tools vivado 2013.4? Thank yo

  • Power management disappeared!

    Each of my patterns of power in the family XP Edition version disappeared and I want to know how to restore/create/together again. I have a laptop and move a portable system when it is on special diets battery when it is connected to the House, but I

  • in Vista, the Service Manager has stopped working

    I get a window saying delivery Manager has stopped working to come

  • DVD RW stopped working on laptop

    Hello. The DVD-RW in my computer laptop sodinly stoped working. I tried to uninstall and re - installed but it tells that the driver as been installed but my system cannot execute it. pls help me solve this problem