IPSEC & 3550

Similar Questions

• Packages that do not receive encryption and decrypt IPSEC

  Hello world

  I have 2691 conencted to the Internet router and it does NAT.

  This connects to the 3550A shift that has the connection to the router 1811W.

  I have VPN installation between 1811W and 3550.

  3550 has connection to 2691 via ospf.

  OSPF is running between 1811w and 3550.

  1811

  1811w # sh crypto isakmp his

  IPv4 Crypto ISAKMP Security Association

  DST CBC conn-State id

  192.168.99.2 192.168.99.1 QM_IDLE 2005 ASSETS

  IPv6 Crypto ISAKMP Security Association

  1811w # sh crypto ipsec his

  Interface: FastEthernet0

  Tag crypto map: VPN_MAP, local addr 192.168.99.1

  protégé of the vrf: (none)

  local ident (addr, mask, prot, port): (192.168.0.0/255.255.0.0/0/0)

  Remote ident (addr, mask, prot, port): (192.168.99.0/255.255.255.0/0/0)

  current_peer 192.168.99.2 port 500

  LICENCE, flags is {origin_is_acl},

  #pkts program: encrypt 0, #pkts: 0, #pkts digest: 0

  #pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0

  compressed #pkts: 0, unzipped #pkts: 0

  #pkts uncompressed: 0, #pkts compr. has failed: 0

  #pkts not unpacked: 0, #pkts decompress failed: 0

  #send 30, #recv errors 0

  local crypto endpt. : 192.168.99.1, remote Start crypto. : 192.168.99.2

  Path mtu 1500, mtu 1500 ip, ip mtu IDB FastEthernet0

  current outbound SPI: 0x0 (0)

  PFS (Y/N): N, Diffie-Hellman group: no

  SAS of the esp on arrival:

  the arrival ah sas:

  SAS of the CFP on arrival:

  outgoing esp sas:

  outgoing ah sas:

  outgoing CFP sas:

  3550A

  3550SMIA # sh crypto isakmp his

  IPv4 Crypto ISAKMP Security Association

  status of DST CBC State conn-id slot

  192.168.99.2 192.168.99.1 QM_IDLE 1001 ACTIVE

  IPv6 Crypto ISAKMP Security Association

  3550SMIA #sh cry

  3550SMIA #sh crypto ipsec his

  Interface: FastEthernet0/8

  Tag crypto map: VPN_MAP, local addr 192.168.99.2

  protégé of the vrf: (none)

  local ident (addr, mask, prot, port): (192.168.0.0/255.255.0.0/0/0)

  Remote ident (addr, mask, prot, port): (192.168.99.0/255.255.255.0/0/0)

  current_peer 192.168.99.1 port 500

  LICENCE, flags is {origin_is_acl},

  #pkts program: encrypt 0, #pkts: 0, #pkts digest: 0

  #pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0

  compressed #pkts: 0, unzipped #pkts: 0

  #pkts uncompressed: 0, #pkts compr. has failed: 0

  #pkts not unpacked: 0, #pkts decompress failed: 0

  #send 15, #recv errors 0

  local crypto endpt. : 192.168.99.2, remote Start crypto. : 192.168.99.1

  Path mtu 1500, ip mtu 1500

  current outbound SPI: 0x0 (0)

  SAS of the esp on arrival:

  the arrival ah sas:

  SAS of the CFP on arrival:

  outgoing esp sas:

  As we have seen more top packets are not encrypted between 1811w and 3550.

  I used the same ACLs on 1811W and 3550A

  INTERESTING_TRAFFIC extended IP access list

  IP 192.168.0.0 allow 0.0.255.255 192.168.99.0 0.0.0.255 connect

  Reasons why packages do not encrypt and decrypt?

  Thank you

  MAhesh

  Hello

  Access-list for interesting traffic should be mirrored.

  Best regards

  Eugene

• integrated macOS Sierra Cisco IPsec VPN does not work anymore (impossible to validate the server certificate)

  Hello

  I just upgraded to macOS Sierra and built-in Cisco IPsec VPN no longer works. When you try to connect, I get a "cannot validate the certificate of the server. "Check your settings and try to reconnect" error message. I use Cisco ASA with self-signed certificates and everything worked fine with previous versions of OS X.

  Please help me, I need my VPN Thx a lot

  I am having the same problem with StrongSwan and help cert signed with the channel to complete certificates included in the pkcs12 file imported to the keychain. It was working properly in El Capitan, but now broken in the Sierra.

• AC100 - no VPN L2TP/IPSec PSK available

  Android 2.2 (Froyo) devices show for VPN connections the following possibilities: PPTP, L2TP, PSK L2TP/IPSec and L2TP/IPSec CRT (checked on several brands of smartphones).

  The AC100 appears only from any PPTP and L2TP, so not L2TP/IPSec.

  No idea why they are missing, and how to fix this?

  Need for L2TP/IPSec to a VPN with a Sonicwall 3060/Pro.

  Here is a description how to connect: [https://www.fuzeqna.com/sonicwallkb/consumer/kbdetail.asp?kbid=8658]

  Hello

  AFAIK the L2TP/IPSec is only available for android devices routed.

  So maybe it's the reason why the L2TP/IPSec in unavailable for AC100.

  I found here a beautiful Android L2TP/IPSec VPN HowTo
  http://blogs.nopcode.org/brainstorm/2010/08/22/Android-l2tpipsec-VPN-mini-HOWTO/

  Maybe it might help a bit!

• Bleed cyan HP 3550

  Hello

  I have a HP 3550, it will print beautifully for centuries and then bleed like crazy. Clean and it's good for a while. Ive changed the Cyan toner. Fuser seems very clean. Just print another line right after and it was perfect even without even a clean is done?

  Any advise?

  Ta

  Louis

  The fault was the thin rubber flap that falls on the toner when you open the front had come away from the body of toner and dragged toner

• IPsec site to Site VPN on Wi - Fi router

  Hello!

  Can someone tell me if there is a router Netgear Wi - Fi that can form IPsec Site to Site VPN connection between 2 Wi - Fi routers via the WAN connection?

  I know that this feature exists on the Netgear firewall, but can you have the same function on any Wi - Fi router?

  See you soon!

  Michael

  I suspect that.

  Thank you very much for the reply.

  See you soon!

• IPsec over HTTPS

  Is there a way to create an IPSec connection on port 443 (for example if the UDP Port 500 is blocked by outside firewallrules). I noticed some other routers are able, or if it will support on Netgear UTM in futured upgrades?

  Thank you...

  Never. 500 is integrated with IPSec.

  You can use SSL VPN to 443.

  You see what routers supporting VPN IPSec on 443?

• Cisco IPsec VPN

  Has anyone this configured with the models in the phone and/or imported their own models? Is this even work?

  It happened to be that I was testing with IKE authentication XAuth disable the tunnel group so I didn't have to type a user name and password each time. I decided to activate just to make more apples to apples for my group of main tunnel and put back it in the model. I also took some anti-replay when I was scouring the template that I downloaded here. I also tested it works with RSA authentication, where you put your PIN with the password and then when you want to connect simply add your id to token at the end.

  model 'Test' {}

  1.1.1.1 gateway address;

  the host pre-shared authentication;

  ipsec tunnel mode.

  IKE-parameters {}

  user authentication;

  aggressive-mode;

  version 1;

  3des-cbc encryption.

  integrity of the hmac-md5-96 code;

  Group modp-1024;

  life 86400;

  }

  IPSec-parameters {}

  3des-cbc encryption.

  integrity of the hmac-md5-96 code;

  perfect-front-secret;

  anti-replay;

  life {type kilobytes; value 28800 ;}}

  }

  }

• the number who call this number 970-210-3550

  can I get the number call my wife phonoe 970-210-3550

  Hello

  It there a call saying they were from Microsoft?

  ===========

  Yes, it's a SCAM!

  The number is usurped or forwarded to another number, perhaps another country.

  970-210-3550.
  http://www.numberinvestigator.com/phone/970-210-3550.html

  ========================

  Avoid scams to phone for tech support
  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Scams by e-mail or web: how to protect yourself - understands what to do if you
  think you've been scammed.
  http://www.Microsoft.com/security/online-privacy/phishing-scams.aspx

  How to recognize phishing e-mails, phone calls or links
  http://www.Microsoft.com/security/online-privacy/phishing-symptoms.aspx

  In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
  Watch groups. Arm yourself with knowledge.

  The Internet Crime Complaint Center (IC3) is a partnership between the Federal Bureau of Investigation
  (FBI) and the National White Collar Crime Center (NW3C), funded in part by the Bureau of Justice Assistance
  (BJA).
  http://www.ic3.gov/complaint/default.aspx

  No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
  computer. So that's the fraud or scams to get your money or worse to steal your identity.

  Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
  phone calls to help you fix your computer
  http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

  Scams and hoaxes
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

  Microsoft Support Center consumer
  https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

  Microsoft technical support
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - contact technical support
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Model IPSEC not no projection in web registration

  Nice day

  I have an edition of Windows 2003 R2 Server Standard with a turnover of the company and is an AD DC. My question is... the model of IPEC is not in the drop-down list of web registration.

  The IPSEC model has all the permissions in the Security tab for full control Domain Admins.

  Reason, I need the model IPSEC is that I am creating a site to site ASA VPN using the IKEv2 certificate authentication so I need a certificate of identity.

  Thank you

  Dana Burton

  Hi Dana,

  I suggest you to ask your question at the following link.
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

• HP Color Laserjet 3550 Printer not print true colors

  I have a hp g72 laptop I received last year. It's a little.  I have a printer hp color laserjet 3550 which is about 5 or 6 years.  I think that I have just updated the drivers to accept 64 bit (not sure). However. My impression went crazy.  It does not print true colors.  I have three new cartridges and waiting for the fourth one to tell me it needs to be charged.  I don't know how to calibrate, but I can't seem to find a way to make the colors print correctly.  Thank you.

  Hello AnnetteShort,

  I suggest you get the latest drivers for your HP Laserjet 3550 from the following HP location:
  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=411173&TaskID=135&prodTypeId=18972&prodSeriesId=411171&lang=en&cc=us

  Be sure to enter the proper operating system and whether 32-bit or 64 - bit.
  You don't specify your operating system so I can't take you to the correct driver.

  There is not a driver listed for Windows 7, so if you have Windows 7 then download driver Windows Vista and right click to install in compatibility mode.

  If this does not help, I suggest you post in the forums of HP support for your Laserjet Printer.
  Click on the link below:
  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413

  I hope this helps.

  Marilyn

• the Xerox workcentre 3550 network printer status is not available

  Having a problem with a xerox workcentre 3550 on a windows server 2008, this doen't impression and shows this error "the network printer status is not available.

  Hello

  That your computer is under domain, you must contact the TechNet forum, where we have of the support technicians who are well equipped with the knowledge on the issues of domain, do visit the link provided below.
   
  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• IM stops working after a minute or two - troubleshooting explains internet connection problems found (the IPsec negotiation failure prevents the connection)

  Need to patch to get IPsec to start working in Internet instant Mesasenger - I fought this for about 3 months. I can't do a Messenger call for more than a minute before having to re - connect - it's driving me crazy - fix your product - Paul * address email is removed from the privacy *.  Settings information (network security) Diagnostics that can block connections:

  filter name: Messaging microsoft instant - name for the provider context: windows Instant Messenger - provider name: Microsoft Corp.Provider - description: Microsoft Windows Firewall: IPsec provider

  Hi paulrhea,
   
  -What version of the operating system are you using?
  -You are able to go online with no problems?
  -Have you been able to use the Messenger without any problem before?
   
  If you use Windows 7 or Windows Vista, follow the suggestion given here.
   
  Try to disable the firewall for the moment and check if it helps fix the problem.
   

  If the problem is resolved, you may need to contact the manufacturer of the program for the settings that can be changed or if there are other updates for this program.

  Note: Firewall can keep the computer worm, pirates etc. Therefore, be sure to turn on the firewall once you are finished with the test.

  If it is Windows Firewall, see the article below:

  Allow a program to communicate through Windows Firewall

  Additional reference on:

  Windows Firewall is blocking a program

• Can I put Intel Core i5-3550 in dc7800 which already has Intel Core 2 Duo E7500

  I want to upgrade my computer, change your power supply, cpu and graphics card.

  I have windows 7 ultiamte, 4 GB of ram, and I think the name of the motherboard is '0AACh '.

  Can you give a list of the CPU I can put in this motherboard and a list of motherboards that I can put in my dc7800.

  No. A Intel Core i5-3550 won't work in your desktop dc7800 PC motherboard. A series of i5 Intel CPU is a much more recent and most different plug type and the generation that those who work

  all processors in the following image will work in your desktop PC motherboard.

  

  Here is a link to the specs and options for your desktop PC.

  Best regards

  ERICO

• Termination of IPSEC Services and anonymous logon

  Ending IPSEC Services

  , I receive the following event in the log to start. I also have a message of success for a logon by ANONYMOUS. I realize that this account peut be an issue of access network system using the (intentionally by MS?) Scary ID of ANONYMOUS but I am concerned about the fact that it could be something nasty.

  Details

  Product: Windows Operating System

  ID: 7023

  Source: Service Control Manager

  Version: 5.2

  Symbolic name: EVENT_SERVICE_EXIT_FAILED

  Message: The %1 service is stopped with the following error:

  %2

      

  Explanation

  The specified service has stopped unexpectedly with the error specified in the message. The service closed safely.

   

      

  User action

  To fix the error:

  Check the error information displayed in the message.

  To view error WIN32_EXIT_CODE SCM met, at the command prompt, type

  SC query service name

  The displayed information can help you troubleshoot the possible causes of the error.
  I tried every combo of syntax, that I can think of, but I can't this query to run.
  I got up and down from behind firewall router firewall protection more live Superantispyware more live Winpatrol and regularly scan with Malwarebytes and Microsoft Security Essentials. Secunia PSI keep an eye on the status of my programs. In this case, I ran additional full scans with all that I have more than 3 online scanners known.  All say CLEAN but I still get these messages. BTW account 'Guest' is disabled.
  
  
  Any help please?
  
  

  Hello

  Have you made changes on the computer before this problem?

  The following articles could be useful.
  IPSec tools and settings
  http://TechNet.Microsoft.com/en-us/library/cc738298%28WS.10%29.aspx
  IPSec troubleshooting tools
  http://TechNet.Microsoft.com/en-us/library/cc784300%28WS.10%29.aspx