IPSec sequence numbers not working not for the multi VPN

Similar Questions

• I like the develop module, but I'm doing something wrong in the library in library, under 'Catalogue, all the photos', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard d

  I love the develop module, but I'm doing something wrong in the library

  In the library, under 'Catalogue, all the photographs', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard drive. When I re-import them in Lr, the changes are not there. My workflow is to do nothing after development or export them to the original with a new file name destination. Anyway, it is that they get a new file name without change of development when they are imported into Lr.  Please help (PC user)

  And others have explained, Lightroom does not apply the changes to the file. All changes are stored in the catalog, and then applied to the image when it is displayed in Lightroom. If you want a copy of the image with any changes so that you can share with others or send it to a laboratory to print, then you must export a copy of this image by using the export dialog box in Lightroom.

  Features of Lightroom as well by its design. The images that you import are always left in their original condition, unmodified.

• I have a logo on a white background.  I need the bottom either transparent.  Not for the life of me I remember how to do this.  Could someone help me with this, please?  Thank you

  I have a logo on a white background.  I need the bottom either transparent.  Not for the life of me I remember how to do this.  Could someone help me with this, please?

  Elimination of the background is transparent can be done with precision using the mixture control if the Style layer.

  1. open the file and if the layer is locked, trash the lock.

  2 Cmd + click on the new icon layer in the layers panel to apply a layer of vacuum below the object.

  3. return to the upper layer and double-click it in the layers panel to bring up the layer Style.

  4 in section mixture if at the bottom of layer Style, move the high gray-scale slider to the right page to the left until it disappears from the background of the illustration. For extra precision, to the point where the White is about to disappear, you can click Option on the half left of the cursor to divide and move it gently to the left when you look white in the picture disappear.

  5. layer > merge down and then file > save

• I downoladed and tried to install CS6 on my computer after that machine has been upgraded to Windows 10.  I get a message that says "serial number is not for the product." The drop-down list does not contain CS6 Design and Web Premium.  What should I do

  I downloaded and tried to install CS6 on my computer after that machine has been upgraded to Windows 10.  I get a message that says "serial number is not for the product." The drop-down list does not contain CS6 Design and Web Premium.  What should I do to get loaded and enabled on my computer?

  That fall down, and the serial number you provide must identify the previous version that you upgraded because CS6 is an upgraded version in your case.

  Error "this serial number is not for a product calling it" | CS6, CS5.5, CS5

  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html

• install cs6, have the cs5 serial number, he said no product calling not for the upgrade

  install cs6, have the cs5 serial number, he said no product calling not for the upgrade

  Hello

  Please see -https://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html

  I hope this helps.

  Kind regards

  Vivet

• Hi hope someone can help? I have acrobat pro, 6 have worked well for the past two years but then just stopped working. Have reinstalled but still won't open, ronning windows 7. Help please!

  Hi hope someone can help? I have acrobat pro, 6 have worked well for the past two years but then just stopped working. Have reinstalled but still won't open, ronning windows 7. Help please!  Janice

  Hey janicem42177174,

  Adobe does most support the installation and use of Acrobat 6 because it is a very old version that is not compatible with Windows 7.

  I suggest you to please use the latest version of Acrobat 11.0.10 is perfectly compatible with your operating system with its functions and improved functions.

  You can download a free trial version of 30 days of Acrobat from here:

  Download Adobe Acrobat free trial | Acrobat Professional XI

  Let me know how it goes

  Kind regards

  Ana Maria

• Set a working folder for the database root $

  Customers need to set a working folder for the $ (root) of each project?
  
  We have created a database of RSC corresponding to every aid project and now have the following Windows folder and the database structure:
  
  (database) Path: $/ HelpProjectOne
  Local path: D:\Projects\HelpProjectOne
  
  (database) Path: $/ HelpProjectTwo
  Local path: D:\Projects\HelpProjectTwo
  
  (database) Path: $/ HelpProjectThree
  Local path: D:\Projects\HelpProjectThree
  
  My question is, when I open a database in the RSC Explorer, click on the ' $' at the top of the tree so that this option is selected, and then click file> Set working folder..., is it a good idea that the path field (database) is set to $ and the Local path field is empty?
  
  Or, I need to define the scope of Local path to D:\Projects or some other setting?
  
  

  In your configuration, you need to set the local path, for example, D:\Projects\.

  The contents of the folder to the datbase $- i.e. the folder HelpProjectOne - will be copied in the designated directory.

  -Dirk Bock

• How to create a VPN file .pcf for the CISCO VPN CLIENT software profile

  Dear all

  How to create a VPN file .pcf for the CISCO VPN CLIENT software profile

  Concerning

  Hi Imran,

  Can't do much about that because it depends on what authenticate you the VPN server and how the settings. But let me introduce you to the memory layout. Once you install and open a VPN client. Press it again and it opens up a new page for the VPN config.

  Example of configuration as it is attached. But it differs depending on the configuration of your vpn server.

  Once you create and save this profile. Your FCP file is stored.

  Please assess whether the information provided is useful.

  By

  Knockaert

• Automatic numbering sequence does not for a chapter in a book FM10

  I have a series of appendices in a book informal (A, B, C, etc.).

  For every screenshot I have set up a paragraph style of legend with the following sequence of AutoNumber - Figure: < $chapnum >. < n + >

  This works very well for each chapter, except a (H), where it works fine until the 3rd instance, then goes back to Figure: H.1 and repeat 1 for each subsequent instance. There is only A flow, so it isn't that. This is not yet the final chapter and all before and after work as nature intended.

  Someone at - it ideas what migh be the cause?

  Mark

  The fixed!

  Chahanged AutoNumber format to S:Figure: <$chapnum>. and now it works fine

• Work around for the Ical does not send do not issue invitations

  If I understand the problem, ical will not send an invitation email to someone it detects has an ical account. People don't know they have an invitation or they use Google or Outlook to their calendars. Despite everything, they just don't receive invitations to your meetings. For some reason, Apple does not change the rules.

  I was going to start using my Google Calendar and just invite myself, but I used my Gmail account as my ID for Apple. Ah, the tangled web we weave when we try to be cute with Apple products.

  In any case, I was wondering if anyone had a work around for this problem "iCal don't send invitations." I want just the people I work with in voluntary organizations to get an email with an invitation attached. Has anyone found a way around this? I'm about to go to Evite!

  Thank you

  You can invite people to events using their e-mail address or their name. To invite people by name, they must be in your Contacts application with an email address, or they must use the same service calendar CalDAV or Exchange as you (for example, your company's employees).

  Invite people using window addresses

  1. Choose window > presentation.
  2. Search people, then drag them to the event.

  Send an email or a message for guests

  1. Control-click on the event.
  2. Choose send all guests or Message all guests.

  Add guests to the Contacts

  1. Force or double-click on a click event.
  2. Hold the pointer over a guest, and then click the pop-up menu .
  3. Choose Add to Contacts.If you do not see Add to Contacts, but you do not show Contact card, the guest is already in Contacts.
  4. An apple article is here: Calendar (El Capitan): invite people to events

• encryption of table space work is not for the old imported tables?

  Hello world

  oracle version 11 g R2 database

  I request below: -.

  following the steps I followed: -.

  expdp system / * SCHEMA = VGOTS dumpfile = logfile = vgots.log ENCRYPTION_PASSWORD vgots.dmp = *.

  drop the waterfall VGOTS user

  created a directory of portfolio: -.

  CREATE or REPLACE DIRECTORY encryption_wallet AS ' / u01/app/oracle/wallet;

  changes in sqlnet.ora

  ENCRYPTION_WALLET_LOCATION =

  (SOURCE = (METHOD = FILE) (METHOD_DATA =

  (RÉPERTOIRE = / u01/app/oracle/pochette)))

  created a tablespace

  CREATE TABLESPACE vgo03

  DATAFILE ' / u01/app/oracle/oradata/orcl/vgos03.dbf'

  SIZE 150M

  ENCRYPTION WITH THE HELP OF '3DES168 '.

  DEFAULT STORAGE (ENCRYPT);

  created the user

  create the user identified by vgots VGOTS

  tablespace VGO03 default

  tablespace temporary temp

  unlimited quota on VGO03;

  Impdp system / * SCHEMA = VGOTS dumpfile = logfile = vgots.log ENCRYPTION_PASSWORD vgots.dmp = *.

  My question is:-

  When I create a table in this encrypted tablespace its working fine

  When the wallet is close, it won't let me select table

  error report:

  ORA-28365: portfolio is not open

  but the charts that I imported to expdp allows to select values

  Please help what option is I took all expdp and impdp so that it works also for old tables

  ReemaPuri wrote:

  VGOTSDBTPS was the old tablespace that was not encrypted

  and imported into an encrypted tablespace vgo03

  You can check this. I don't see any clause REMAP_TABLESPACE in your impdp command.

• OracleTextSearch doesn't work is not for the CSV file

  Hi all

  I use Oracle Webcenter content with Version: 11.1.1.9.0 - 2015-04-14 07:19:29Z - r126792 (Build: 7.3.5.185).

  I configured using OracleTextSearch below of setting in the config.cfg file

  SearchIndexerEngineName = OracleTextSearch

  I can search text for the file types such as text, excel, docx, pdf, but I'm not able to do text search the csv file.

  Please suggest any alternative to enable text search the csv file.

  Please find the below the example of csv file.

  "Id","CurrencyIsoCode","City","Status"
  "1","GBP","","Activated"
  "2","GBP","Reading","Expired"
  "3","GBP","Reading","Expired"
  "4","GBP","Brighton","Activated"
  "5","USD",""Atlanta"""","" Georgia""","Expired"
  "6","GBP","Reading","Expired"
  "7","GBP","Bristol","Activated"
  "8","GBP","Chicago","Expired"
  "9","GBP","Chicago","Expired"
  "10","GBP","Chicago","Expired"
  "11","GBP","Chicago","Expired"
  "12","GBP","Reading","Activated"
  "13","GBP","London","Activated"
  "14","GBP","Reading","Expired"
  "15","GBP","Singapore 068893","Activated"
  "16","USD","Overland Park","Activated"
  "17","GBP","London","Activated"
  "18","GBP","Hangzhou","Activated"
  "19","GBP","Southampton","Activated"
  

  Do something:

  Edit config.cfg and add below variable:

  TextIndexerFilterFormats = csv

  After that, save and exit. Restart the server.

  Checking in a new file csv and do a word search.

  It should work let me know again, you have a question or not

• leader. Execute() works do not for the bat file

  Hi all
  My function copyToWinClipboard (text) is to get a string directly in the Windows Clipboard. Is designed to allow the user to my project just paste into the open application dialog box, an endnote. I am not sure if the Clipboard FM (supported by the methods of copy/cut/paste for Doc) really fills in the Windows Clipboard too.
  In the forum script PhotoShop I found the idea how to proceed.

  #target framemaker
  // note the blank in the path
  copyToWinClipboard ("E:\\_DDDprojects\\FM+EN escript\\FM-11-testfiles\\BibFM-collected.rtf");
  
  function copyToWinClipboard (text) {
    var theCmd, clipFile = new File(Folder.temp + "\\ClipBoardW.bat");
    clipFile.open('w');
  //  theCmd = "echo \"" + text + "\" | clip"; // this doesn’t help either
    theCmd = "echo " + text + " | clip";
    clipFile.writeln (theCmd);
    clipFile.close ();
    clipFile.execute ();
  }
  

  This script provides a short flashing (command prompt), but the Clipboard does not contain the expected string. However, when double clicking generated I:\!_temp\ClipBoardW.bat the Clipboard is filled correctly.
  IMHO the execute method does not work for bat files. In another area of my script project I run an exe with this method correctly.

  I just wanted to report that the example script in your first post doesn't work on my computer.

  You mention that the command window appears shortly, which indicates that the .bat file is executed.

  Perhaps execution fails at another time?

  If you want to open the command window and the arrival of messages, add the command "pause" in the batch file:

  ....

  clipFile.writeln ("pause");

  clipFile.close ();

  clipFile.execute ();

  I use FM11 on Windows 7.

• QuickLook works do not for the pictures in Messages

  I am a very experienced user with multiple Macs and several iOS devices, all El Capitan running (or Yosemite) and iOS 9.3 and all messages (SMS/text/iCloud) synchronize correctly between all devices. But on my main Mac, a 2015 (MBP) (El Capitan) MacBook Pro, if someone texted me photo, when I select this picture, and then use the space bar to call QuickLook (to enlarge the photo), I get a window (white) large, empty, instead of the actual image:

  (Interestingly, the empty window door the correct name of the photo, but no image).

  So, on this machine, if I want to display an image that I received, I have to drag Messages on the desktop, and then I can use QuickLook. But QuickLook refuse to work within the Messages.app. (This is NOT the case on any of my other Macs. On these machines, when I hit the space bar, I get a larger version of the picture, as expected. "But it's the Mac I use more often!)

  I should also mention that this MBP is new, and its contents have been cloned, from a backup of my previous MBP a few weeks ago. And the previous MBP had the same problem, both in El Capitan and previously in Yosemite. This seems to suggest that there is a kind of corruption, somewhere.

  Any suggestions?

  I've considered trashing preferences, but Messages has several preferences files, and I don't know which ones to affect function. I'm fine with reset preferences of the application or on the way home my account information. But more importantly, if possible, I don't want to lose my message history.  :-)

  Preferably related files include:

  com.apple.imservice.iMessage.plist

  com Apple.IMessage.Bag.plist

  com Apple.iChat.plist

  com Apple.imagent.plist

  No one knows which of these may be better to try to remove, while retaining the history of my message? Alternatively, if I'm on the wrong track, I would appreciate any other suggestions.

  Thank you!

  Hello

  The captain also lacks the ability to open preview

  

  This photo is also an AIM chat who actually sent this photo 'online' if I zip (Compress) them.

  com Apple.iChat.plist is not holder iMessage 'story' that he she now holds the recent list of cat (which is useless because there is no option in the file Menu to access).  It also holds all preferences and Settings Menu d ' option.

  com Apple.imagent.com holds the account names of all accounts that you have and are involved in logging operations behind the scenes. There is a process called image that starts when the computer does and it will be based on the setting in the General Section identify enough to 'listen' servers. The parameter in the section general read "when I leave Messages, set the status offline" - it does not affect the iMessages account that will always show offline Messages.

  com.apple.imservice.iMessage.plist it is not longer used.  Yosemite El Capitan, it uses com.apple.ids.service.com.apple.madrid.plist instead.  It is also only on the info on behalf of iMessages and not on the 'history' or how pictures of cats are treated.

  
  

  com Apple.IMessage.Bag.plist it lists only the last used Apple iMessages server.

  
  

  However, there are these some .plist in ~/Library/Containers/com.apple.soagent/data/Library/Preferences which also play a role.

  

  Note the location of the path bar across the bottom.

  com.apple.messageshelper.FileTransferController.plist very probably watching the wick she holds a record of all the files and images sent to you, but in the hex names.

  View of Xcode.

  

  com Apple.quicklookconfig.plist doesn't seem to have relevant information.

  

  The next would be the Preview but .plist which is as empty as the at a glance.

  The real "live .plist lies in ~/Library/Containers/com.apple.Preview/Data/Library/Preferences , rather than having an Alias point in the folder ~/Library/Preferences.

  That said, and after reviewing through it I see no reference to what applications it is allowed to work with.

  This seems to be a question that involves 3 apps, look and preview Messages.

  All have read and write routes through ~/Library/Containers and the file final storage ~/Library/preferences.

  I am tempted to check the number of files that have lost your property and read and write permissions see this thread and useful item before the green marked resolved one.  Reset Home Folder permissions and ACLs error  (Linc offers first - marked text relatively useful, then a "Fix" that is the Green post resolved.

  

  20:40 on Friday. May 6, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• G3 250: kye f2 f3 doesn't work is not for the brightness adjustment

  RES / sir

  I have laptop HP 250 g3 on the frist day feature kye f2 and f3 does not since I purchesed help me please how to update the driver for the brightness adjustment

  Hello:

  Your laptop is not supported for Windows 8.

  'Re missing you the graphics driver.

  If your model has a Core of 4th generation, try this driver.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24348