IQ524 wireless keyboard/mouse has stopped working

Similar Questions

• 2.4 GHz HP wireless optical mouse has stopped working

  My wireless mouse has stopped working. I use it on a laptop Windows 8. I used this mouse wireless with this computer for almost a year. All of a sudden it just stopped working. I changed the batteries, so it wasn't the problem. I have uninstalled and reinstalled software and that did not work. Is there anything else I can try before I buy a new mouse? Product # is WT564A.  The model # is FHA-3510. The S/N IS CN1 [personal information]. Product #, model # and s/n is not the computer mouse. Any help would be greatly appreciated.

  Hey there eunash,

  I found three links that could help you, please take a look and try some of the steps:

  Keyboard and wireless mouse troubleshooting

  Mouse, touchpad and keyboard with Windows problems

  .. .and finally, check out the Merita post on this thread, they had some good ideas while explaining what might be going on: http://h30434.www3.hp.com/t5/Other-HP-Consumer-Products-and-Technologies/HP-FHA-3510-mouse-trouble/m-p/2666383/highlight/true#M10473

• internal keyboard mouse has stopped working

  The cursor does not appear and I can't use the keyboard key.

  Press Windows key + R

  Type: devmgmt.msc

  Press enter on your keyboard

  The top and bottom of your keyboard to navigate to the mouse and pointing device

  Press the right arrow to expand

  Select listed pointing device

  Press the context menu key on your keyboard between the Windows key and the CTRL

  Follow the wizard screen to uninstall it

  When the uninstall is complete

  Press Alt + F4 to close the Device Manager

  Press Alt + F4 to close all programs until you see the desktop

  Press Alt + F4

  Press "R" key to restart the machine

  The mouse should be redetected.

  If the problem persists, try to do a system restore before you began to experience the problem.

• sMy Microsoft UDB wireless mouse has stopped working. Can it be repaired or is it just did.

  My Microsoft 3000 wireless optical USB mouse has stopped working.  Can it be repaired or is it just did.

  Hello

  -Don't you make changes to your computer because of which the question began?

  I would recommend that you follow the steps in this article and see if they help.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

• HP touchsmart IQ775 Wireless mouse has stopped working.

  Wireless mouse has stopped working. I have a HP Touchsmart IQ775 so I can touch the screen to navigate. did a restore of the system in SafeMode this morning and everything works fine now, but of course, it happens again. Last week, the computer did an update to quicktime which disabled, so I had to completely uninstall quicktime and the mouse immediately worked. looked but could not find that whatever this is updated overnight to re - train the problem this morning. However, the system closed and said 'power system failure driver' cannot know how to fix this, all say updated mouse drivers. is associated it with? This not computer savvy, usually google problems on my ipod touch and looking and staring at me but were not able to understand this. Thanks for all the tips

  Hello

  HP also has their own update so he could be there?

  I would stop automatic driver updates, because they are often older certified and MS is far behind.

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
  ------------------------------------------------------

  This, to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Try to run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------

  Also check with HP support and forums.

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Who knows what the solution to the message "Microsoft keyboard driver has stopped working?

  Who knows what the solution to the message "Microsoft keyboard driver has stopped working?

  Hi Raymond,

  Thanks for the quick response.

  The question you posted would be better suited in the Logitech Forums. I would recommend posting your query in the keyboard Logitech Support.

  Keyboard Logitech support

  http://www.Logitech.com/en-us/support/keyboards

  If you need further assistance on all issues related to Windows, just tell me and we will be happy to help you.

• my wireless mouse has stopped working

  I have two mouse Microsoft Wireless in the 3500 Series and 4000 series, I had the 4000 first order works now my 3500 has stopped working can help a whole?

  Hi Richard,

  Here are a few troubleshooting steps that you can try to solve this problem.

  
  Method 1: Run the Microsoft fixit tool and check.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems

  If the method above does not work, proceed to the next method.

  Method 2: Refer to the suggestions for the following links.
  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122
  
  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398

  If you have additional questions, or if this problem persists, come in and we will be happy to help you.

• All of a sudden my wireless mouse has stopped working. The mouse is on and relatively new.

  Tonight my mouse (Logitech) wireless has stop working.  This happened once, and one of my friends told me to remove the receiver, shut my computer down and put the mouse back in.  However, I don't remember the exact steps he gave me.   I tried several different things, but none seems not to work.

  Hello

  What is the model number of the mouse?

  Method 1:

  I suggest you run the Microsoft fixit tool and check.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Support for Microsoft mouse, keyboards, LifeChat, LifeCam & more

  http://support.Microsoft.com/ph/7746

  Method 3:

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=Tab03

  I would suggest you also contact the Logitech support forum and check.

  http://www.Logitech.com/en-us/support

• My Apple wireless mouse has stopped working.

  Initially, software system warned me that the batteries are low.  Then it stopped working completely.  I replaced with new(tested good) AA batteries and the mouse still does not connect to my iMac. 10.11.3 is updated software.  My trackpad works ok so the BT Service is always good. I even tried an another Apple wireless mouse and it doesn't connect either.  Can an optical mouse as this just failure?

  A mouse can not just, indeed at the end of his life he cannot do anything else.   I think that your first test is to hold the mouse upside down and check if you have a green light display.    If so, the batteries are probably ok.   If the light flashes, it is most likely, connections are at fault.   Clean the inside of the battery carefully in case there is any residue of previous batteries.   Clean your battery connections and try again.   You could also try your mouse (indeed, two of them) with another computer, maybe a friend.   It doesn't matter if it's a pc.   That will confirm the effectiveness of the mouse.

  Magic Mouse 2 has been designed and developed for El Capitan (10.11.3)... so old mice may not work as well, but I have yet to hear any complaints.

• my microsoft wireless mouse has stopped working, I replaced battery

  my wireless mouse was fine and then stopped working. I changed the batteries and it seemed to work and then arrested again.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/838398

• V470 blue tooth wireless mouse has stopped working

  My Logitech v470 blue tooth mouse worked but stopped.  I went online and downloaded the latest version of the software.  The machine started to work.  I used for1.5 days and on the second day, all of a sudden, it stopped working.  All diagnoses that I know say it works.  The blue light comes on when I press the search button but never connects.  The computer says, the device works, but it does not.  Please help since the pad on my laptop is more sensitive (opens instead of allowing me to do some drag on the desktop) and I need the mouse to work around the touchpad.

  Hello

  read these tutorials on how to set up bluetooth

  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Here are solutions to some common problems with Bluetooth devices.

  You can also try a convenience store for diagnose and fix common problems with equipment and devices running.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  If the above does not correct this contact Logitech

• Microsoft Explorer Mini track blue Mouse has stopped working

  The mini track blue mouse worked fine and then just stopped working.  I tried to turn on/off the mouse and restart the computer.  I am running Vista.  Any ideas?

  Hello
   
  Do you remember any change to your computer?
   
  I suggest that you follow the steps below and check if that helps.
   
  Step 1:
   
  Follow the steps mentioned in the article below and check if any method to solve your problem.
   
  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122
   
  Step 2:
   
  If the methods in the article made little assistance, I would have you perform the System Restore point that your mouse works fine.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Shortcut keys keyboard multicamera has stopped working

  PP 2014.0.1 release.

  My keyboard shortcut keys (standard: 0,1,2) were working, but they stopped working Mid-edit. Restart the application did not set it. The mouse works - but what crappy way to choose a camera.

  Any suggestions?

  To answer my own question:

  I discovered that the multicamera track in the panel mounting must be targeted (enabled in the header of the track in the timeline panel) or keyboard shortcuts to select a camera don't work. (I don't know how my track became not targeted, but it did).

  While I understand how a keyboard shortcut will change the current clip in the multicamera to the associated camera sequence, the keyboard shortcut is strongly linked as input in the multicamera, not the timeline window. After all, I click on a camera view in the blocking program monitor to select that camera. I click in the timeline to do so. Is therefore not at all clear that the multicamera track must be targeted for the selection of the camera work.

  I find it confusing.

  Other users consider this a bug or a good design?

• My magic mouse has stopped working.   Is there a battery that I need to replace?

  My magic mouse stop working.   Do I have to replace a battery?  If so, how?

  If it's a Magic Mouse 2 then you reload by using a standard USB cable Flash. The port is at the bottom of the mouse. If it's a Magic Mouse, then you must replace the batteries. Coverage is at the bottom of the mouse.

• Space of the wireless keyboard Apple will stop working in Safari

  I have an iMac 2.8 2008 running El Capitan 10.11.5 with 6 GB of ram.

  Recently, I noticed that my space on my Apple wireless keyboard does not work on facebook. My first thought it was a matter of facebook. Then I started to notice that the question was on other sites. I have dealt with to check other applications and another browser to see if the issue was reproducible. The keyboard works perfectly without a problem. The question is so bad, I am strength of Firefox allows you to validate this question. Someone at - it solution!

  Hi, Gary...

  Check the battery level in system preferences > keyboard