Iron for transfer on fabric

Similar Questions

• iron-on transfer

  I have HP iron for transfer on fabric (for clear fabric) for inkjet.  I don't have an inkjet printer. New printer is laser CP1025nw

  Can I use this transfer paper in this new printer?

  Hello

  Years as shonw on its specifications:

  http://WWW8.HP.com/au/en/products/printers/product-detail.html?OID=5072356#! tab = specifications

  Kind regards.

• How to print a transfer on fabric so it prints backwards?

  How to print a transfer on fabric so it prints backwards using the HP Deskjet 3050 printer has SERIES of J611?

  Marcnic68,

  Welcome to the HP Forum.

  If you use Windows, you can use Paint.

  Painting still works and is included in Windows 8.x, is told by the way!

  1. First make a copy of your file if you find yourself flipping around your original file.
  2. Open the new .jpg file in paint
  3. On the Home tab, click on 'Select' > Select All
  4. Next to the 'Select' box blue, find three icons. The third icon from the top down is the command "rotation / flip.
  5. Select the small arrow next to the icon "rotation / flip" > select "Flip horizontal" *
  6. Save the file under a new name
  7. Print the file

  **  Provides a mirror of an original image result

  Click on the Thumbs-Up Kudos to testify and say thank you.

  Although I strive to reflect best practices of HP, I do not work for HP.

  When the answer is a good patch or solution to your Question, click accept as Solution !

• Is there a file management utility availabe for transfer files from Iphone to PC using the USB connection or wifi? Thank you

  Is there a file management utility availabe for transfer (image) files from Iphone to PC using the USB connection or wifi? Thank you

  You should be able to synchronize with a compatible Picture Manager, but you can also see the TouchCopy application.

• How can I transfer my ISP settings (cable) on a disk for transfer to my new computer?

  Transfer

  
  

  How can I transfer my ISP settings (cable) on a disk for transfer to my new computer? am NOT computer savvy, so I need a specific answer.

  am using disks, there is no much to transfer >

  Thank you

  You want to just save your ISP for Windows Mail account settings?  WinMail in: tools | Export of accounts & save export on the desktop. Copy disc and place it on the desktop of the new machine. Reverse the import process in the new email client.
   
  Are you sure that's what you're looking for?

• HP Inspiron One: Felt transfer on fabric with an Officejet from HP e-all-in-one printer 6700 Premium

  I just bought on transfer fabric sheets, the instructions say select MEDIA: iron on T-Shirt transfer, printing: Norman or even better. However, I don't see any of these options when I click on the Properties tab. Also how do I print mirror image? Thank you

  I found a thread in the Adobe community, that I think might help. Please take a look at some suggestions here: How to reverse a photo, (mirror image).

  It seems that these steps are not necessary:

  Click on the Image at the top, then rotate, then click on back layer horizontally

  

  

  

  

  If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos and if it helps to find a solution, please click on the button "Accept as Solution" down below in this message.

  

  Spoiler (Highlight to read)

  Answer: ' Don ' t Stop Me, I'm on a roll! "

• Select all for transfer

  I want to transfer an audiobook from a USB to ITunes on my Mac Pro, but I can't seem to select all.  I have to hold down the SHIFT key and click each chapter individually for their transfer. It's your time and aggravating and annoying.  I don't have this problem on a PC.  Also using the command key or control won't work at all in this case on the Mac.  Have I missed something, you have any suggestions?  Any help appreciated

  dhugg wrote:

  I want to transfer an audiobook from a USB to ITunes on my Mac Pro, but I can't seem to select all.  I have to hold down the SHIFT key and click each chapter individually for their transfer. It's your time and aggravating and annoying.  I don't have this problem on a PC.  Also using the command key or control won't work at all in this case on the Mac.  Have I missed something, you have any suggestions?  Any help appreciated

  Try resetting the NVRAM/PRAM http://support.apple.com/kb/ht1379 memory

• playlists for transfer from one library to another on the same computer

  I have 2 iTunes libraries, each in a separate iTunes folder on a single computer.  A library contained musical; the other doesn't have any content.  Also, I have 2 iPod classic I want to be able to synchronize separately for each library.  To this end, I want to transfer playlists selected library 1 2 library.  Is it possible directly on the computer?  If so, the best way to do it?  Otherwise, it seems that my next recourse is limited to manually synchronize playlists selected library 1 iPod 2 & then iPod 2 2 library, assuming that this is feasible.  Any contribution will be welcome.

  You need to export the playlist with the music files to a location (your office for ex), and then import it into the second reading list.

  https://support.Apple.com/kb/PH12145

  https://translate.Google.fr/translate?HL=FR & SL = in & u = https://support.Apple.com/kb /PH12145 & prev = search

  ("manually synchronize playlists selected library 1 iPod 2 & then iPod 2 2 library, assuming that this is doable": it is not easily achievable)

  
  

• Manual of PID for transfer Auto smooth

  Hello

  I am using the PID command for a pump to ISCO syringe with manual Steplessly in automatic control, but I can't seem to make it work.

  This shoot-syringe has an entry and exit pressure and is used to apply a force to keep the vertical movement of a constant of the sample. The amount of applied pressure is related to vertical displacement by an equation that appears in the attached VI. This VI aims to apply a variable force according to the displacement of the sample in order to try to keep moving 0.

  Here is some general information on the pump that I use:

  The pump is autonomous and can independently maintain pressure regardless of the LabVIEW PID controller. The pump only takes pressure of LabVIEW controls and maintain this pressure until another pressure control (I think that the pump integrated into the controller itself is a regulator PID.)

  The problem I have is if I start the VI with the pump at a constant pressure (using the hand control with advanced PID VI) and crossing the wire to automatic control, the advanced PID VI immediately shows the pump to adjust the pressure up and then slowly bring it down to the steady state. This happens even if the hand control pressure is stable and identical to the auto set pressure. This following image details what I'm talking about:

  

  The pump is in steady state, as shown in the diagram of pressure and the value in manual initially and then toggled mode on automatic control (designating the huge bump). I did it twice to show what happens when I go back. Manual automatic is without suddenly, because I used a local variable to constantly change the manual set temperature.

  I did some troubleshooting and experiment and here are some of the results that I found:

  1. when going from manual to automatic control, PID regulator sets the maximum pressure and then slowly bring it down to the set value

  2 when it is cold from the VI in automatic mode with true to reset, the PID controller sets the pressure at a minimum and then slowly bring it up to the set value. This occurs even if the value of the original process is close to the set point (feed the actual value in the PID controller before execution also does not help.)

  I also tried to play with the gains of PID in VI and found that if I turn off the 'I' and parameters "D" (together the two to 0), I no longer suffer from the huge bump, but the PID controller can bring the real set point value as there is always a lag.

  I don't know if this is a result of bad PID tuning, but after the initial bump in the transition between manual and automatic, the PID controller seems to be able to maintain the correct pressure well.

  The reason why I am using a PID controller rather send the pump controls (since it can independently maintain pressure) is because it is much smoother.

  In the attached VI, there are a few side screws that are called that are specific to the pump and the LVDT used for detection of vertical movement. I do not think that they have an effect on why I don't get a transfer smoothly without jerking, so I only put comments to explain what they are doing.

  I found another thread in forum with a similar question, but none of the solutions posted it seemed to have helped me. Here is the link to this thread:

  http://forums.NI.com/T5/LabVIEW/PID-manual-to-auto-bumpless-transfer/m-p/3180609#M920098

  Thank you.

  Best regards

  Victor

  Your topology is not quite how we recommend that you make the transfer smooth. Can you do something like this?

  

  Who will do manual setpoint pressure (units) and you need to update your gain, but it should follow. What is an option?

• Download SP3 for transfer to another computer

  (If wrong forum please to move - 1st post)

  Download SP3 and transfer to another computer?   Mobile dongle does not work on it because it does that SP1 is installed.

  old 7yr Dell Dimension 4600 desktop (XP) in perfect condition, used only for work (CAD), but now want internet on this subject.  Only alternative is switched where we are and it is not an option. Using of wifes laptop each time need to download.

  This computer is another Vista destination it is XP so any use?

  I know it's a real newbie question but I don't know what I need to know about computers. If I can download SP3 on USB and copy paste on the desktop.

  Thanks in advance

  You need SP2 before installing SP3.

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28 (download for SP2)

• Procedure for transfer of Mail HD for Windows Mail HD messages.

  I am trying to get a procedure to transfer e-mail messages to a HD (my backup HD) running Windows Vista Mail to my main HD running Vista Windows Mail.  The two HD's in the same tower.  Microsoft says that this is possible.  I still have to find everything about Windows Mail in Windows Mail.  I went through bad attempts trying to get it to work.  I could get it only partially forward messages, and then now I get a new 'Retrieved Messages' folder added to my main HD Window Mail from HD backup local files.  I used a simple cut & paste to get the results that I have just mentioned.  I want to do an import from message!

  The right way to move to the location of the message store is to go to tools | Options | Advanced | Maintenance | Store the folder, and then click Modify.  And then specify the new location (make sure it's an empty folder that already exists).  Then, close Windows Mail, and then reopen and there will be moves the messages himself.  Do not try to move yourself, as then it will be messed up.

  You can also try file | Import | Messages and then point to the backup directory.

  See here for background information on the Organization of the message store: www.oehelp.com/backup.aspx#wm

  Steve

• Photosmart printer C310 premium - print one iron on transfer.

  I use a Photosmart Premium 310 with Windows Vista and can not find how to get a mirror image when you try to print iron on transfers.

  Hello

  This function is no longer in the printers driver as his already in most photo programs. For example, if you open the image in microsoft paint, you may choose to flip the image horizontally and print it out. This will give you the required result.

• Project first Pro CC for transfer to another computer.

  I started to edit a video from a trip I went on MacBook Pro my mother a few weeks ago. The storage on this computer got full, so I bought a new one for me. I want to transfer old video on my new computer so that I can edit from there, without having to restart the project. I would like to mention that on the old computer, I had not enough storage to import all my clips, I was working on the SD card I have everything recorded on. Thanks in advance for any help.

  Load project files and all media on the new computer.  You will need to recreate a link to the media when you open the project.

• Application for transfer of apex 4.2.4 to 5.0

  How can I transfer my apex 4.2.4 application to version 5.0?

  Hello

  Apex 5 is available for download (yet). But you can sign up for a workspace apex 5 to early adopteur to https://apexea.oracle.com/ and try to import your application and schema FOT it, here for the test.

  Kind regards

  Kees Vlek

  -----

  + If the answer to question please change replied and mark the appropriate post as correct / helpful. +

• Must old iPhone be on the same version of iOS for transfer to the new iPhone?

  I pre-ordered iPhone 7. My question is that I have to move my old iPhone to iOS 10 in order to transfer my old iPhone to the new iPhone 7?

  N °

  (144534)