IRQL_Not_less_or_equal BSoD
Hello
For about a month, I get a BSOD with this error message on my laptop. Little often. If I use my computer for about 12 hours a day, sometimes once or twice. I read about the issue, but it seems that any solution I have to first download the dump files and whatnot. I ran the Verifier under the direction of Patrick Barker in this thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/windows-7-irqlnotlessorequal-minutes-after-login/3d5a3035-93c7-42cc-b3b5-6daf26253be9
I don't know exactly how I'm supposed to solve the problem after using Driver Verifier, but here are these files:
Minidump: http://1drv.ms/1G0KN9h
These are all dumps from 20/12/2014. That's when he began to show upward with regularity
My system specs are:
Laptop model: ASUS N61jq Series Notebook
OS: Windows 7 Home Premium 64-bit
Processor: Intel Core i7 Q720 CPU @ 1.60 GHz 1.60 GHz
RAM: 4 GB
Any help would be appreciated, thanks.
S
You must re - run malwarebytes to make sure that the malware do not regenerate.
Tags: Windows
Similar Questions
-
IRQL_NOT_LESS_OR_EQUAL BSOD Vista
I have a Vista computer and get the BSOD, and then stops. It happens in safe mode as well
Here is some information I found in the dump file
Ntkrnlpa.exe ntkrnlpa.exe + 2b83c 0x81c12000 0x81fcc000 0x003ba000 0x513a901f 08/03/2013 9:27:59 PM system Microsoft® Windows® NT Kernel operating system & 5.1.2600.6368 (xpsp_sp3_gdr.130307 - 0422) Microsoft Corporation C:\WINDOWS\system32\ntkrnlpa.exe
RASPPTP.sys raspptp.sys + cc84 x 0 82397000 0x823ab000 0 x 00014000 0 x 47919112 01/19/2008 1:56:34 AM Microsoft® Windows® Operating System - to - Peer Tunneling Protocol 5.1.2600.5512 (xpsp.080413 - 0852) Microsoft Corporation C:\WINDOWS\system32\drivers\raspptp.sysTracy
These have been associated with raspptp.sys - to-Peer Tunneling Protocol of Microsoft Corporation, but the underlying cause is Symantec I think. I would like to remove and replace with MSE
Symantec is a common cause of BSOD.
I remove and replace it with Microsoft Security Essentials at LEAST FOR TESTER
http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN -
Get IRQL_NOT_LESS_OR_EQUAL BSOD - please help.
View blue screen PROGRAM:
082116-10982 - 01.dmp 21/08/2016 07:24:02 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 00000000'00000008 00000000'00000002 00000000'00000001 fffff800'030d19bf ntoskrnl.exe ntoskrnl.exe + 6f400 NT Kernel & System Microsoft® Windows® operating system Microsoft Corporation 6.1.7601.23418 (win7sp1_ldr.160408 - 2045) x 64 ntoskrnl.exe + 6f400 C:\Windows\Minidump\082116-10982-01.dmp 6 15 7601 292 152 8/21/2016 07:24:46
The last 4 events dump files:
http://www.filedropper.com/minidump_1
I did memtests with windows and with memtest86 and found no errors, but only made one pass...
Thanks for your help!
Update the following drivers from the links provided.
NVIDIA GeForce GTS 450.
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Browse all global symbols data functions
Timestamp: Thu Mar 04 06:07:52 2014 (5315B 408 )http://www.nvidia.com/download/driverResults.aspx/105847/en-us
Update your BIOS to version 0307
The machine credential [of Smbios 2.5, DMIVersion 0, size = 2414]
BiosMajorRelease = 8
BiosMinorRelease = 15
BiosVendor = American Megatrends Inc.
BiosVersion = 0305<== currently="">==>
BiosReleaseDate = 09/09/2010
SystemManufacturer = system manufacturer
SystemProductName = system product name
Family = to be filled by O.E.M.
SystemVersion = Version of the system
SystemSKU = to be filled by O.E.M.
BaseBoardManufacturer = ASUSTeK Computer Inc..
BaseBoardProduct = M4A88T-V EVO/USB3
BaseBoardVersion = Rev X.0xM4A88T-V EVO/USB3 Driver & tools
https://www.ASUS.com/motherboards/M4A88TV_EVOUSB3/HelpDesk_Download/
Update NIC Broadcom 802.11 USB driver
Loaded symbol image file: bcmwlhigh664.sys
Image path: \SystemRoot\system32\DRIVERS\bcmwlhigh664.sys
Image name: bcmwlhigh664.sys <== broadcom="" usb="">==>
Browse all global symbols data functions
Timestamp: Thu Jul 31 04:11:20 2012 (50179328)bcmwlhigh664.sys: https://www.SysNative.com/drivers/driver.php?id=bcmwlhigh664.sys
IF the system continues to crash after update, run driver verifier and to share a link to the discharge resulting.
Driver Verifier - stalking a bad driver to behave.
-
IRQL_NOT_LESS_OR_EQUAL BSOD Windows 8
My computer has recently been blocked every time the screen goes blue and it says the cause of was irql_not_less_or_equal, has happened four times now, I have reinstalled my graphics drivers from AMD, twice, twice the completely uninstalled and then reinstalled, it still happens so I don't think that is the problem... even though most of the posts online say that it is probably the cause. It happened once in game, and then all other times happened while on Skype and I watch a video, or alt-tabing out a game on, most of the time Skype. I bought this laptop 2 months ago, and all I've done is played games on it and installed the necessary software and all my drivers updated. I don't have a clue as to what caused it or what to do... Help please thank you. Blue screen display gave me this-
042014-60793 - 01.dmp 20/04/2014-19:19:46 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 000000 a 6 '673bfb10 00000000' 0000000f 00000000 00000001' fffff803' bbc47367 hal.dll hal.dll 37367 + x 64 + 5 ntoskrnl.exe has 440 C:\Windows\Minidump\042014-60793-01.dmp 4 15 9200 280 784 4/20/2014 19:21:50
and this-
041814-49967 - 01.DMP 18/04/2014 22:32:02 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 000000 a 0'21defc58 00000000' 0000000f 00000000 00000000' fffff801 449953 c 0 hal.dll hal.dll + 373c0 x 64 + 5 ntoskrnl.exe has 440 C:\Windows\Minidump\041814-49967-01.dmp 4 15 9200 280 728 4/18/2014 22:33:44
In addition, another answer on this site said to CBS in CMD, I don't know how the read or know what to do with it but the CMD says he found that he could not fix corrupt files... Here is a link to the CBS.log https://www.mediafire.com/?bzas4ak0w99ihbz newspaper
I have no idea how to read this or the blue screen information and have no idea what to do... If someone could tell me what I can do to stop these errors, it would be a great help.
Also, I'm sorry if I've put this in the wrong topic, could not choose between repair and recovery, or performance and maintenance.
Worlds
Service of soluto was referenced in this crash, but not a direct involvement.
1: kd >! analyze - v
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access an address pageable (or completely invalid) to a
application interrupt level (IRQL) that is too high. It is usually
caused by drivers using a wrong address.
If a kernel debugger is available, download the stack trace.
Arguments:
Arg1: 000000a6673bfb10, memory referenced
Arg2: 000000000000000f, IRQL
Arg3: 0000000000000001, bit field:
bit 0: value 0 = read operation, 1 = write operation
bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
Arg4: fffff803bbc47367, address memoryDebugging information:
------------------WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff803bbfd4168
Unable to get nt! MmPoolCodeStart
Unable to get nt! MmPoolCodeEnd
000000a6673bfb10CURRENT_IRQL: f
FAULTING_IP:
HAL! HalpPciReadMmConfigUlong + 7
fffff803'bbc47367 8902 mov dword ptr [rdx], eaxDEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0XA
Nom_processus: SolutoService.
TRAP_FRAME: fffff8801c0df190-(.trap 0xfffff8801c0df190)
NOTE: The frame trap does contain not all registers.
Some registry values can be set to zero or incorrect.
Rax = 0000000000404000 rbx = 0000000000000000 rcx = ffffffffffd0e000
RDX = 000000a6673bfb10 rsi = 0000000000000000 rdi = 0000000000000000
RIP = fffff803bbc47367 rsp = fffff8801c0df328 rbp = ffffffffffd0e000
000000000000008c = c 000000000000008 r10 = 0000000000000000 R8 = r9
R11 = fffff803bbc52f60 r12 = 0000000000000000 r13 = 0000000000000000
R14 = 0000000000000000 r15 = 0000000000000000
iopl = 0 nv up ei pl zr po nc
HAL! HalpPciReadMmConfigUlong + 0x7:
fffff803 'bbc47367 8902 mov dword ptr [rdx], eax ds:000000 a 6' 673bfb10 =?
Reset the default scopeLAST_CONTROL_TRANSFER: from fffff803bbcd5769 to fffff803bbcd6440
I suggest that you remove AVG completely and replace with Windows defender, at least for a period of time to see if the crashes stop.
AVG REMOVER
http://www.Avg.com/us-en/utilities
How to turn Windows Defender real-time Protection on or off in Windows 8 and 8.1
http://www.eightforums.com/tutorials/21962-Windows-Defender-turn-off-Windows-8-a.html
Also uninstall and reinstall the service of soluto, although I recommend to leave uninstalled.
-
IRQL_NOT_LESS_OR_EQUAL BSOD Windows 7
I can only run in Mode safe mode, Normal Mode, my laptop goes down after a minute or two. The last thing I did before it crashed was install LogMeIn Hamachi. It was December 2013, so I don't know if it is a known problem with latest version of Hamachi. The error Stop: 0x0000000A (0 x 0000000000000000, 0xFFFFF80002EC3325, 0 x 0000000000000002, 0 x 0000000000000000) I can't uninstall anything or fix anything in safe mode, so I'm just kinda stuck. I would really appreciate the help. If you need more information on my computer, please ask me. Thank you.
For the moment, in safe mode, stand C:\Windows\System32\Drivers and rename SBFWIM.sys to SBFWIM.old and then try to start Windows normally.
Kind regards
Patrick
-
X 34 gel, restarting and BSOD
Windows 10 64-bit and strix 980ti
PC had no problem with the old monitor.
X 34 is causing games to freeze, restart the PC and sometimes bsod.
I got "irql_not_less_or_equal" bsod a few times.
I reinstalled the drivers, I tried the drivers aged, switched cables DisplayPort and devulcanization back to no sync g / 60 Hz and it continues to do. Seems to be more common in fact.
Will connect it via hdmi later and see if she always does.
GPU is not overclocked.
I have disabled synchronization of g and he played very well for a few hours.
Then I turned sync g turn there was down and there is not yet.
Do not know what is past but turning sync g market has worked so far.
On a side note, be careful with the DisplayPort cables, had a "premium" one of the microcenter who had the 20 pin, which is the power... He kept my fans and LEDs on when I turned it off.
I think that this power were the cause, but he kept pass after that I changed it up by disabling synchronization g.
-
Hello.
Someone at - it solutions to this problem? It keeps causing an irql_not_less_or_equal BSOD associated with the file netwlv64.sys.
I've upgraded from Vista to Windows 8 and Intel drivers are version 13.4.0.139. I contacted Intel and they tell me that they release an update for Windows 8.
I don't want downgrade to Vista but will if there is no solution.
I have also experienced the BSOD KMODE_NOT_HANDLED which, from what I've read is due to pilots not working is not on properly on devices. I have disabled these features because they have too no update for Windows 8, and they are only for a memory card reader that I cannot live without, but is it normal for a fix of the problem KMODE BSOD?
Thanks for any help.
Zeon
Your Avast is originally netwlv64.sys. I remove and replace it with the built-in Defender
Older drivers who need update
SmSerl64.sys 2008-09-26 04:45:56
ITECIR.sys 2010-07-13 05:50:47
netwlv64.sys 07/10/2010 08:11:47Avast can be a cause of BSOD.Please delete and replace by Microsoft Security Essentials at LEAST FOR TESTERhttp://files.avast.com/files/eng/aswclear5.exe
http://www.Microsoft.com/security_essentials/How to find drivers:
-Google search for the name of the driver
-compare Google results with what is installed on your system to determine on what device/program, it belongs to
-Visit the web site of the manufacturer of the hardware or program to get the latest drivers (do not use Windows Update or Device Manager Update Driver function).
s ' there is difficult to locate them, post back with questions, and someone will try and help you find the right programThe most common drivers are listed on this page: driver reference
http://www.carrona.org/dvrref.php
-Driver manufacturer links are on this page: http://www.carrona.org
-
The first few weeks, I got Windows 7 32 Bit on my Satellite Pro P300D 201, it worked fine. But suddenly, there was a blue screen with the label "reference_by_pointer" I've tried to stop as usual. I have not installed any new software a few days before (just a few updates "Windows Update"). Now this apears blue screen every time I try to stop. Hibernation and energy saving still work.
But, sometimes when I connect my mobile phone "Sony Ericsson K800i" using the USB connection and the "Sony Ericsson PC Suite 6" it is "irql_not_less_or_equal" blue screen.»
I don't know if theres something wrong with the RAM/working memory, but I can't think because this computer is brand new and it never fell down or something like that.
I'm sorry for my bad English, I'm still learning.
Hello
Perhaps Windows isn't compatible with your software up-to-date and causing this BSOD. You should try to use the restore system to a previous state.
Also have you updated the software for your mobile phone? Maybe it's not compatible with Windows 7's again. Visit the site of the factory for an update.
I have the same phone but I m using MyPhoneExplorer which works quite well on Windows 7 but I m using the Bluetooth connection and not on the cord. -
Predator 17 BSOD repeatedly (IRQL_NOT_LESS_OR_EQUAL)
Hello
I predator about mi 17 Dec 15 and BSOD occurred to me several times (say more than 10 times)
I hope that this community might be able to help me all the chances.
Here are the details.
BSOD: IRQL_NOT_LESS_OR_EQUAL
Occurrence:
Often - Wake up sleep windows
Sometimes - Windows startup
Minidump: https://drive.google.com/file/d/0B9NHyHvhm0kTMG1YYjdXSjd1WE0/view?usp=sharing
Hello, I had the same BSOD with IRQ less than or equal. I think it's a matter of this Killer networking blabla. I got the blue screen for eg. When you install the latest version of VirtualBox. Disable the 2 NICs (Lan and Wlan) I would like to install it and after the installation I activate these adapters again and it works. Hopefully, Acer will come out a better Bios for a better management of the IRQ and will current SSDs. Bravo steve
-
IRQL_NOT_LESS_OR_EQUAL (Vista BSOD 0x0000000A)
error 0x0000000A (0x00000002, 0x00000000, 0x9B150300, 0x81C0C11F)
The machine regularly seems blue screen. Any help?
Topher-
Hello
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65----------------------------------------------------------
BCCode: 0a 0x0000000A
Drivers could be at fault, however the problems of disk or security/antivirus/antispyware products are
just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
The video driver or something affecting it would be questionable.At the end of this message, I'll post a bluescreen generic and in the next convenience store
How do to update the drivers and BIOS but also to check memory message.-----------------------------------
BCCode: 0a 0x0000000A
Cause
This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.
The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.
If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.
Solve the problem
If a kernel debugger is available, get a stack trace.
To resolve an error caused by the faulty device driver or service system, BIOS
- Restart your computer.
- Press F8 to character-based menu that displays the choice of operating system.
- In the WindowsAdvanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.
To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool
- Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
- Try disabling the cache in memory of the BIOS.
- Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
- Make sure that the latest Service Pack is installed.
- If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
- For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.
If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.
Comments
Before upgrading to a new version of Windows, remove all third-party device drivers and system services and disable any antivirus. Contact software manufacturers for updates of these third-party tools.
BCCode: 0a 0x0000000A<-- read="" this="">-->
* 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-==================================================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do without if needed fail or the Vista DVD or recovery command prompt mode
Options if your system was installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
I don't know exactly what the cause of the problem, but I have a feeling that it is a driver problem. I don't know why the problem started, I've had a laptop where the monitor came out on this subject so I photographed the hard to VMware, I never started an operating system that has not been installed in native mode via vmware before so I thought there may be errors.
The first time it booted up it starts normally, the Windows Activation came, although I do not know why I have reactivated, and he says that it needs to restart. I restarted and it said it was installing 10 updates - after the updates done, it restarted and then any startup mode, I choose to get exactly the same problem blue screen of death.
I searched for hours a reply - all, I access the Startup Repair tool command prompt. I think it's a driver issue, but I don't know how to uninstall the drivers from the command prompt.
It is vital that I have fix without restoring the system or in a Format that I need all programs intact with their original settings. I probably just need to uninstall all the drivers and install them again.
Hello
Best to check also with VMware Support and forums.
-----------------------------------------------------------------
There are two Bug_Checks with IRQL_NOT_LESS_OR_EQUAL then its best to specify the BCCode or
Stop Code. Both are 0 a 0x0000000A and D1 0x000000D1.Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
Troubleshoot the BlueScreens - top 3 methods (+ 1 other).----------------------------------------------------------
Drivers could be at fault, however the problems of disk or security/antivirus/antispyware products are
just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
The video driver or something affecting it would be questionable.Make sure that BIOS driver low-level chipset and drivers are all updated by checking manually
system manufacturer and device manufacturers sites.-----------------------------------
BCCode: 0a 0x0000000A
Cause
This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.
The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.
If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.
Solve the problem
If a kernel debugger is available, get a stack trace.
To resolve an error caused by the faulty device driver or service system, BIOS
- Restart your computer.
- Press F8 to character-based menu that displays the choice of operating system.
- In the WindowsAdvanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.
To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool
- Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
- Try disabling the cache in memory of the BIOS.
- Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
- Make sure that the latest Service Pack is installed.
- If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
- For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.
If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.
Comments
Before upgrading to a new version of Windows, remove all third-party device drivers and system services and disable any antivirus. Contact software manufacturers for updates of these third-party tools.
BCCode: 0a 0x0000000A<-- read="" this="">-->
* 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-----------------------------------------------------------------------------------------------------------
If there is any RAID drivers they are very suspicious and/or drivers problems are very real prospects.
Other possibilities are video and other drivers. Refer to the section of driver in my credits
methods of troubleshooting blue screen below. BIOS, drivers low level chipset, memory and
antispyway/antivirus/security programs can also cause this. Check the resolution of problems and when
you get the pilot section refer to generic methods in next message and return to
the troubleshooter if necessary.BCCode: D1 0x000000D1
Cause
A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.
This bug check is usually caused by drivers who used a wrong address.
If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:
- The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
- The function call was made to a function in another pilot, and that this driver has been unloaded.
- The function was called by using a function pointer that was an invalid pointer.
BCCode: d1 0x000000d1<-- read="" this="">-->
* 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-==================================================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during ' blue screen
of death "crashes and displays the information about all crashes in one
Table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do without if needed fail or the Vista DVD or recovery command prompt mode
Options if your system was installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps and happy holidays!
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
BSOD irql_not_less_or_equal randomly in the last 2 days
Hello
From yesterday, I get the bsod - irql_not_less_or_equal. It produces random intervals (20 minutes to boot to a few hours).
I installed new hardware in the month.
This does not seem connected to the process running at the time of the accident, but I don't run games or anything too heavy cpu/ram (chrome/Skype for most).
I watched the recent driver updates and there is nothing more recent, then a week (well before the problem started) but I could have missed something.
I don't have any other antivirus addition MSE (seen this happen in other discussions).I tried the digitization of the RAM and the HARD drive, but no error came.
Maybe I was hoping that someone can point me to the right direction.
dump files:
https://1drv.Ms/u/s! ArAJn2L7IFl1gnyeDFe3sPZoJ5qR
I'd appreciate any help I can get, it's frustrating: (.)
WARNING: Unable to verify timestamp for netr28ux.sys.
fffff880'026cf000 fffff880'027 c 7000 T netr28ux (no symbol)
Loaded symbol image file: netr28ux.sys
Image path: netr28ux.sys
Image name: netr28ux.sys
Browse all global symbols data functions
Timestamp: Thu Jul 03 05:31:38 2009 (4A4DCFFA)Update your * Ralink Wireless LAN Driver from the link below.
0: kd >! machineid sysinfo
Identification information of the machine [of Smbios 2.6, DMIVersion 38, size = 2684]
BiosVendor = Intel Corp.
BiosVersion = BCZ6810H.86A.0021.2011.0831.1555
BiosReleaseDate = 31/08/2011
SystemManufacturer =
SystemProductName =
SystemVersion =
BaseBoardManufacturer = Intel Corporation
BaseBoardProduct = DZ68BC
BaseBoardVersion = AAG30742-401netr28ux.sys.
https://www.SysNative.com/drivers/driver.php?id=netr28ux.sys
Wireless LAN: * Ralink Wireless LAN Driver
-
Have BSOD recently, need help! "error"IRQL_NOT_LESS_OR_EQUAL"
Since last week, I was doing a BSoD at least once a day. On the first there would be about 10 hours between the BSOD, but little by little they have been getting more frequent, because I get them at least once every 6 hours now. Recently, I activated the option Save .dmp files. Yesterday, I ran a memory test and a test drive, no errors in one or the other. I ran a memory and hard drive test and no error came. In addition, the blue screen is moving much too fast for me to see when it appears.
Here's my .dmp files
1: http://www.speedyshare.com/cnpJT/121314-124894-01.dmp:550:0
2: http://www.speedyshare.com/8NZ2s/121314-61620-01.dmp
I opened with a program called 'blue screen display' and they say that they were caused by "ntoskrnl.exe" and the other crash by "hal.dll".
Bug control channels are the two "IRQL_NOT_LESS_OR_EQUAL"
Thanks for reading! :)
Alex
**************************************************************************
* *
* Bugcheck analysis *.
* *
**************************************************************************
Use! analyze - v to obtain detailed debugging information.
Bugcheck A, {2, 1, fffff800036d6fe8, 18000000408}
Cannot load the image networx.sys, 0n2 error Win32
WARNING: Unable to verify timestamp for networx.sys
ERROR: Module load completed but symbols can be loaded for networx.sys
Probably caused by: tdx.sys (tdx! TdxSendDatagramTransportAddress + 2f5)
NetWorx update:
https://www.SoftPerfect.com/download/If you are unable to update, then remove it.
Please download and run the display driver and download a copy of the report he produced on your OneDrive. To obtain a report all drivers Select Edition, select all followed by file, save selected items.
http://www.NirSoft.NET/utils/DriverView.htmlPlease provide a copy of your system information file. Type system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Do not place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download at your OneDrive, to share with everyone and post a link here. Please say if the report was obtained in safe mode. The request for a copy of this file is additional to answer the question about the brand and the model.
For assistance OneDrive see paragraph 9.3:
http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm -
As of February 17, I had a BSOD whenever I first start my machine (at roughly the screen black with the Windows logo, but before than the blue welcome screen) - this is an IRQL_NOT_LESS_OR_EQUAL
The machine reboots and asks if I want to enter a mode of recovery or start normally. In fact, the recovery mode doesn't have the only time where I've tried, but the machine boots normally if I choose to boot normally to the usual "Windows did not start properly" black and white screen.
Processor is an Athlon II X 4 620
2 x 2 GB DDR2 RAM
Catalyst 13.1 running ATI 5750 512 MB graphics card (later non-beta, AFAIK)
via the USB port (but unchanged for months before the show):
3 x external hard drives
Xbox 360 controller
keyboard and mouse are plugged into the PS/2 ports via USB to PS/2 adaptersNothing has changed except the last raft of Windows updates 13, which caused a problem or something fell. First start always travel on - same question on the 21st, 22nd and today. However, after the initial accident at the start, asking to start Windows normally results in all the fine to come and stay there until I have reboot (same collision model) or turn off, and then again the next day (same model of collision).
I'm afraid that this is the beginning of the end for my machine, but all this modern bar game installs (curse you DRM) is saved on my drives external is not a total disaster if it will die.
Any ideas please?
SkyDrive link to the Minidump: https://skydrive.live.com/redir?resid=6FD1C58B297A41AE! 169 & authkey =! AHMgC0W-wV2ldIs
I have run via WinDbg and have the following:
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************Use! analyze - v to obtain detailed debugging information.
Bugcheck A, {0, 2, 0, fffff80002ed3cd4}
Probably caused by: ntkrnlmp.exe (nt! KiPageFault + 260)
Follow-up: MachineOwner
---------3: kd >! analyze - v
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access an address pageable (or completely invalid) to a
application interrupt level (IRQL) that is too high. It is usually
caused by drivers using a wrong address.
If a kernel debugger is available, download the stack trace.
Arguments:
Arg1: 0000000000000000, referenced memory
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bit field:
bit 0: value 0 = read operation, 1 = write operation
bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
Arg4: fffff80002ed3cd4, address memoryDebugging information:
------------------READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800030f7100
0000000000000000CURRENT_IRQL: 2
FAULTING_IP:
NT! IopCompleteRequest + c64
fffff800'02ed3cd4 488b 09 mov rcx, qword ptr [rcx]CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0XA
Nom_processus: csrss.exe
IRP_ADDRESS: ffffffffffffff88
TRAP_FRAME: fffff88003d6d6e0-(.trap 0xfffff88003d6d6e0)
NOTE: The frame trap does contain not all registers.
Some registry values can be set to zero or incorrect.
Rax = fffff88003d6c958 rbx = 0000000000000000 rcx = 0000000000000000
RDX = 0000000000000000 rsi = 0000000000000000 rdi = 0000000000000000
RIP = fffff80002ed3cd4 rsp = fffff88003d6d870 rbp = 0000000000000000
R8 = 0000000000004740 r9 = 0000000000000080 r10 = 0000000000000002
R11 = 00000000000001c 8 r12 = 0000000000000000 r13 = 0000000000000000
R14 = 0000000000000000 r15 = 0000000000000000
iopl = 0 nv ca ei pl nz cy PE
NT! IopCompleteRequest + 0xc64:
fffff800'02ed3cd4 488b 09 mov rcx, qword ptr [rcx] ds:547 c: 00000000 00000000'=?
Reset the default scopeLAST_CONTROL_TRANSFER: from fffff80002ebe1e9 to fffff80002ebec40
STACK_TEXT:
fffff880 '03d6d598 fffff800' 02ebe1e9: 00000000' 0000000 a 00000000'00000000 00000000'00000002 00000000'00000000: nt! KeBugCheckEx
fffff880 '03d6d5a0 fffff800' 02ebce60: 00000000 00000100 "fffff880 '03d6d998 fffffa80' 06162f78 fffffa80'05 c 31690: nt! KiBugCheckDispatch + 0 x 69
fffff880 '03d6d6e0 fffff800' 02ed3cd4: 00000000'00000001 00000000'00000000 fffff880 '20206f49 fffff880' 03d6db58: nt! KiPageFault + 0 x 260
fffff880 '03d6d870 fffff800' 02eb1657: fffff8a0 00000000'00000000 00000000'00000000 00000000'00000000 00000000': nt! IopCompleteRequest + 0xc64
fffff880 '03d6d940 fffff800' 02e6cee5: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiDeliverApc + 0x1c7
fffff880 '03d6d9c0 fffff800' 0311396a: fffffa80 ' 060608a 0 fffffa80 '06163b 30 fffff880' 03d6db50 fffff880 ' 03d6db48: nt! KiCheckForKernelApcDelivery + 0 x 25
fffff880 '03d6d9f0 fffff800' 031dc85e: fffffa80'00000004 fffffa80 '06163b 30 fffff880' 03d6db50 00000000' 00000000: nt! : NNGAKEGL: 'string' + 0x292ea
"fffff880 '03d6dae0 fffff800' 02ebded3: 00000000 ' 00000030 fffffa80 ' 05c36b50 00000000' 0020f478 00000000' 0020f601: nt! NtMapViewOfSection + 0x2bd
fffff880 '03d6dbb0 00000000' 7767159a: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiSystemServiceCopyEnd + 0x13
00000000' 0020f458 00000000'00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: 0x7767159aSTACK_COMMAND: kb
FOLLOWUP_IP:
NT! KiPageFault + 260
fffff800'02ebce60 440f20c0 mov rax, cr8SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: nt! KiPageFault + 260
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
Nom_image: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 50e79935
FAILURE_BUCKET_ID: X64_0xA_nt! KiPageFault + 260
BUCKET_ID: X64_0xA_nt! KiPageFault + 260
Follow-up: MachineOwner
---------Some drivers of Norton Internet Security are active at the time of the accident.
Try to uninstall Norton Internet Security and see if the problem resolves.
Then you could reinstall Norton Internet Security.
-
Another BSOD error: IRQL_NOT_LESS_OR_EQUAL
Hello
I want to thank you again for my previous question answered and fixed. Apparently, it was the faulty motherboard and I've updated so that now there is no problem with my previous BSOD. Until just now.
I just got an error at the time when I played in Skyrim. He was going well until all of a sudden the screen went distorted and static with graphic artifacts all over the screen and eventually BSOD with error "IRQL_NOT_LESS_OR_EQUAL" I see myself on this problem happened to me before, but I don't don't know where to start with. This morning I made the backup using Windows backup on my hard drive and yesterday, I upgraded my unit of graphics card from Nvidia GT 440 to ATi Radeon HD 6670 but yet before I did, I uninstalled all of the Nvidia software on my PC before grooving in the new ATi. And I scanned for malware using Malwaresbytes Anti-Malware and F - Secure Internet Security, no infected files or suspicious software at the end of the scan. I hope you guys could understand by taking a peek at my crash dump file. Set in the .zip file contains the dump file and dxdiag report just in case.
A bit of luck with it? I hope that you guys can understand this.
Thank you!
To identify what loads when you start using Autoruns (freeware from Microsoft).
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.
Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.
Maybe you are looking for
-
I can't uninstall as it asks me to complete the download of an earlier version. This occurred shortly after that FFox froze in March. Computer not on 9 April to November 5. Tried to install again in November FFx version 7.0 and got same message must
-
Performing a reset to an earlier date for a fix, I constantly get a message telling me to reinstall the breakpoint as a mistake as due . How can I do this?
-
Windows 7 stuck loading at the Welcome screen
-Loading of Windows 7 stuck on the Welcome screen -Only works on Safe Mode, safe mode with network works well -Starting repairs na not -I don't have a Windows 7 CD or the HP recovery CD -I've never had viruses or malware or connect USB drives for thi
-
Problem with conversion of a normal app in app without head
"I made an example of code where you respond to messages (email, PIN) without user intervention is possible." The application is started and when a new message is received it respond and delete the new message. I need the app to start as soon as the
-
Hello I am eager to have 2 installed both applications to activate two icons on the bb for my project. I have no idea what I should do and would appreciate a lot a little help. I created my first application in netbeans that installs and works, and I