irregular flow oddly with two TCs problem

Similar Questions

• strange problem with two Cruzer 32 GB flash drives on XP Pro

  I have two Cruzer 32 GB discs that will not work on a particular PC running XP Pro SP3.

  The readers work in other PC running XP Pro and PC running Windows 7.

  Now, until someone says, "it's obviously a problem with the PC" I have to say that USB Flash drives other works very well in this PC manufacturers, as does my Seagate FreeAgent Go drive (so it is not a question of power).

  Flash only readers who present a problem are the readers of Sandisk.

  When I insert the Cruzer it flashes slowly then after maybe 20 seconds start blinking quickly and continues to do so as long as she remains inserted in the USB. There is no indication on the screen it was inserted - nothing ofering to the media browser, files, etc.

  The drive appears in my computer as drive F removavble, but no file or folder is visible.

  When I go to administrative tools > computer management > disk management, disk is NOT visible, it is not visible as a removable drive.

  In Device Manager it appears as SanDisk Cruzer USB one, using a device driver Microsoft date 01/07/2001.

  I tried to uninstall this device, removing the Cruzer then turn the PC, but when I plug it in there new detects new hardware - Sandisk Cruzer and drive hard, but then says that it can not work properly and invites me to restart the PC. Subsequently, he then returned to the symptoms described above.

  The TWO Sandisk Cruzer 32 GB disks with the same problem.

  Someone at - it any other ideas?

  Thanks pechter!

  Kies was the problem.

  I followed the instructions in this thread http://forums.sandisk.com/t5/All-SanDisk-USB-Flash-Drives/sandisk-cruzer-blade-problem-troubleshooti... and it cures the problem.

  I must point out that it has not affected any other brand of flash drive I've tried, the incompatibility seems to be only between Sandisk Cruzer and Kies, leads me to conclude that this is a problem of Sandisk.

• LR and PS will not update 'Download error' 49 customer service contact? anyone had this problem and how to solve? was running windows 8.1 and now running windows 10 but had the same problem with two BONES

  LR and PS will not update 'Download error' 49 customer service contact? anyone had this problem and how to solve? was running windows 8.1 and now running windows 10 but had the same problem with two BONES

  Check your hosts file.  to help with this and more:

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

• Problem setting up Port Forwarding with two routers.

  I can't set up by Linksys RT31P2 and routers port forwarding WRT160Nv3.

  My setup is Webstar Modem = RT31P2 = WRT160N = Mac OS 10.6.5. (No configurable modem and ISP do not prevent port forwarding. It comes with two Linksys routers).

  I had a Monty Python-going around with the support of Cisco cat; and follow up with telephone assistance in which the agent knew nothing about port forwarding and his supervisor expressed the view that it was not possible with two routers. Sigh.

  If anyone can help me with step by step specific and simple instructions to configure routers. I know that the basic procedures. I'm not clear, what exactly changes on routers.

  I read that portforward.com has to say and it does not work so I must be misunderstanding something.

  The ip address of my computer is 192.168.1.103.  Are the last three digits of this speech concluded the two routers in the area on the port forwarding page? What other changes should be done what router?

  I know the port numbers that I use are OK because I can implement successfully if I connect to one or other of the routers (but not both), and my software of p2p shows port are open.

  Any help and suggestions most welcome.

  If you set up as I have suggested that you have only a single LAN that will be using in your addresses * 192.168.15 case. So in your case:

  1. change the address LAN IP of 192.168.1.1 to 192.168.15.2 WRT.
  2 disable the DHCP server.
  3. connect the LAN of the WRT port to port LAN of the RT.

  That's all. Disable the DHCP server will not affect whatever it is that you're connected LAN - LAN and DHCP server on the RT is still operational.

  After the change, previously the WRT computers may require a reboot to get a new address 192.168.15. *.

  Your computer to which you are transferring must have an IP static and not dynamic (or variable). Check the current IP information on this computer. It must have an IP address like 192.168.15.103, mask 255.255.255.0, gateway 192.168.15.1 subnet and DNS 192.168.15.1 server or maybe two other IP addresses instead. Note DNS servers if you do not 192.168.15.1.

  Then configure a static IP address on the computer. Use something like 192.168.15.10, 255.255.255.0 gateway 192.168.15.1 and the DNS servers you found before.

  After this implement 192.168.15.10 port forwarding.

• Problem of election after split-drain repeated with two nodes

  Hello
  
  I use a custom source based on BDB - 5.1.19 (excxx_repquote)
  
  with two site-MASTER and SLAVE on the other...
  
  NSite = 2
  ACK = quorum
  
  -the master is written at the rate of 10 txn quotedb per second
  -l' test is to isolate the customer from the master (brain) and reconnect after a random time include 1 sec to 10 sec
  
  the test run of about 10 times, but at some point, the slave to process receive DB_EVENT_REP_ELECTION_FAILED
  and the captain enter the mode of election and never leave the CLIENT mode. I have to say that I decided to freeze the client to kill me (kill-9 my pid) when I get this event...
  
  
  Here is the log in light on the master...
  
  [1307872770:871621] [6510/47655809107168] MASTER: rep_send_function returned: 110
  [1307872770:973655] [6510/47655809107168] MASTER: bulk_msg: Send copy due to PERM after buffer
  [1307872770:973667] [6510/47655809107168] MASTER: send_bulk: send 266 bytes of the buffer in bulk (0x10a)
  [1307872770:973672] [6510/47655809107168] MASTER: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 68 eid - 1, type bulk_log, LSN [21] [986648] perm
  [1307872770:973693] [6510/47655809107168] MASTER: wait for the acknowledgement of receipt: need 1
  [1307872771:26623] [6510/47655809107168] MASTER: rep_send_function returned: 110
  [1307872771:126380] [6510/1162996032] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, Journal type, LSN [21] [946345]
  [1307872771:126407] [6510/1162996032] MASTER: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 68 eid - 1, type dupmaster, LSN [0] [0] nobuf
  [1307872771:126695] [6510/1162996032] MASTER: rep_start: old version 17 journal found
  [1307872771:126753] [6510/1162996032] CLIENT: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 68 eid - 1, type newclient, LSN [0] [0] nobuf
  [1307872771:126833] [6510/1183975744] CUSTOMER: from the election thread
  [1307872771:126876] [6510/1183975744] CLIENT: Start election Europe 2, ack 1, priority 100
  [1307872771:126890] [6510/1183975744] CLIENT: Election thread has egen 69
  [1307872771:127423] [6510/1173485888] CLIENT: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, type newclient, LSN [0] [0]
  [1307872771:130079] [6510/1183975744] CLIENT: count VOTE1 [0] (2147483647, 69)
  [1307872771:130113] [6510/1183975744] CLIENT: count an election
  [1307872771:130134] [6510/1183975744] CLIENT: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 68 eid - 1, type vote1, LSN [21] [986728] nobuf
  [1307872771:130147] [6510/1173485888] CLIENT: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 68 eid - 1, type master_req, LSN [0] [0] nobuf
  [1307872771:130438] [6510/1152506176] CLIENT: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, type vote1, LSN [21] [946437]
  [1307872771:130460] [6510/1162996032] CLIENT: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, living type, LSN [21] [986728]
  [1307872771:130467] [6510/1152506176] CLIENT: update of gen from 68 to 70
  [1307872771:130482] [6510/1162996032] CLIENT: received egen ALIVE of 71, 69 mine
  [1307872771:130503] [6510/1162996032] CLIENT: Election completed in 0.003602000 sec
  [1307872771:130515] [6510/1162996032] CLIENT: Election; Egen 70
  [1307872771:130534] [6510/1152506176] CLIENT: received vote1 egen egen 71, 71
  [1307872771:130581] [6510/1152506176] CLIENT: count VOTE1 [0] (0, 71)
  [1307872771:130593] [6510/1089075520] CUSTOMER: from the election thread
  [1307872771:130619] [6510/1152506176] CLIENT: Vote Incoming: (eid) 0 (pri) 100 ELECTABLE (gen) 70 (egen) 71 [21,946437]
  [1307872771:130642] [6510/1152506176] CLIENT: not in election, but receipts vote1 0x282c 0x8
  [1307872771:130674] [6510/1089075520] CLIENT: Start election Europe 2, ack 1, priority 100
  [1307872771:130692] [6510/1089075520] CLIENT: Election thread has 71 egen
  [1307872771:130704] [6510/1194465600] CUSTOMER: from the election thread
  [1307872771:130733] [6510/1194465600] CLIENT: Start election Europe 2, ack 1, priority 100
  [1307872771:132922] [6510/1089075520] CLIENT: count VOTE1 [1] (2147483647, 71)
  [1307872771:132949] [6510/1089075520] CLIENT: accept the new vote
  [1307872771:132958] [6510/1089075520] CLIENT: count an election
  [1307872771:132973] [6510/1089075520] CLIENT: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 70 eid - 1, type vote1, LSN [21] [986728] nobuf
  [1307872771:132985] [6510/1194465600] CLIENT: fate of election thread
  [1307872771:133012] [6510/1089075520] CLIENT: count VOTE2 [0] (2147483647, 71)
  [1307872771:133037] [6510/1089075520] CLIENT: counted my vote 1
  [1307872771:133048] [6510/1089075520] CLIENT: jump phase2 waiting: already had 1 vote
  [1307872771:133060] [6510/1089075520] CLIENT: got enough votes to win. election of fact; Gen (prev) 70
  [1307872771:133071] [6510/1089075520] CLIENT: Election completed in 0.002367000 sec
  [1307872771:133084] [6510/1089075520] CLIENT: Election; Egen 72
  [1307872771:133111] [6510/1089075520] CLIENT: flag of election ending in 0, e_th 1, egen 72, 0x2a2c, e_fl, 0x0, lo_fl 0 x 6
  [1307872771:133170] [6510/1173485888] CLIENT: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, living type, LSN [0] [0]
  [1307872771:133187] [6510/1173485888] CLIENT: Racing replication msg lockout, ignore the message.
  [1307872771:173744] [6510/1162996032] CLIENT: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, type vote2, LSN [0] [0]
  [1307872771:173769] [6510/1162996032] CLIENT: Racing replication msg lockout, ignore the message.
  [1307872771:231593] [6510/1183975744] CLIENT: flag of election ending in 0, e_th 0, egen 72, 0x2a2c, e_fl, 0x0, lo_fl 0x1c
  [1307872771:231629] [6510/1183975744] CLIENT: fate of election thread
  [1307872777:443794] [6510/1131526464] CLIENT: connect to 2.0.0.210:12345 site with result 115 init
  [1307872971:644194] [6510/1131526464] CLIENT: connect to 2.0.0.210:12345 site with result 115 init
  [1307873165:844583] [6510/1131526464] CLIENT: connect to 2.0.0.210:12345 site with result 115 init
  [1307873360:44955] [6510/1131526464] CLIENT: connect to 2.0.0.210:12345 site with result 115 init
  [1307873554:245347] [6510/1131526464] CLIENT: connect to 2.0.0.210:12345 site with result 115 init
  [1307873748:445736] [6510/1131526464] CLIENT: connect to 2.0.0.210:12345 site with result 115 init
  [1307873942:646117] [6510/1131526464] CLIENT: connect to 2.0.0.210:12345 site with result 115 init
  [1307874136:846509] [6510/1131526464] CLIENT: connect to 2.0.0.210:12345 site with result 115 init
  
  ... and stay infinite this situation
  
  
  
  My question is why the master is suddenly transformed into CUSTOMER and why he never returns to the MASTER
  
  
  
  Thanks in advance...
  
  
  
  Here is the log for the customer
  
  [1307872315:455113] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, Journal type, LSN [21] [984396]
  [1307872315:455134] [1282/1160603968] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, Journal type, LSN [21] [984483] perm
  [1307872315:609962] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21] [984733] perm
  [1307872315:764958] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21] [984986] perm
  [1307872315:919962] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21] [985238] perm
  [1307872316:75018] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21] [985491] perm
  [1307872316:229959] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21] [985741] perm
  [1307872316:384949] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21] [985993] perm
  [1307872316:499899] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21] [986141] perm
  [1307872316:539895] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, Journal type, LSN [21] [986221]
  [1307872316:540078] [1282/1171093824] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, Journal type, LSN [21] [986307]
  [1307872316:540100] [1282/1160603968] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, Journal type, LSN [21] [986394] perm
  [1307872316:694950] [1282/1171093824] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21] [986648] perm
  [1307872316:847349] [1282/1129134400] MASTER: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 70 eid - 1, Journal type, LSN [21] [946345]
  [1307872316:847698] [1282/1171093824] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, dupmaster, LSN type [0] [0]
  [1307872316:847999] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type newclient, LSN [0] [0]
  [1307872316:848168] [1282/1171093824] MASTER: rep_start: old version 17 journal found
  [1307872316:848222] [1282/1181583680] CLIENT: Racing replication msg lockout, ignore the message.
  [1307872316:848398] [1282/1171093824] CLIENT: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 70 eid - 1, type newclient, LSN [0] [0] nobuf
  [1307872316:848504] [1282/1192073536] CUSTOMER: from the election thread
  [1307872316:848542] [1282/1192073536] CLIENT: Start election Europe 2, ack 1, priority 100
  [1307872316:848566] [1282/1192073536] CLIENT: Election thread has 71 egen
  [1307872316:849634] [1282/1192073536] CLIENT: count VOTE1 [0] (2147483647, 71)
  [1307872316:849654] [1282/1192073536] CLIENT: count an election
  [1307872316:849680] [1282/1192073536] CLIENT: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 70 eid - 1, type vote1, LSN [21] [946437] nobuf
  [1307872316:851403] [1282/1160603968] CLIENT: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type vote1, LSN [21] [986728]
  [1307872316:851448] [1282/1160603968] CLIENT: received vote1 egen egen 69, 71
  [1307872316:851470] [1282/1160603968] CLIENT: received the old vote egen 69, 71, ignoring vote1
  [1307872316:851481] [1282/1160603968] CLIENT: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 70 eid 0, living type, LSN [21] [986728] nobuf
  [1307872316:851538] [1282/1171093824] CLIENT: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, master_req, LSN type [0] [0]
  [1307872316:851558] [1282/1171093824] CLIENT: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 70 eid 0, living type, LSN [0] [0] nobuf
  [1307872316:854254] [1282/1160603968] CLIENT: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, type vote1, LSN [21] [986728]
  [1307872316:854275] [1282/1160603968] CLIENT: received vote1 egen egen 71, 71
  [1307872316:854317] [1282/1160603968] CLIENT: count VOTE1 [1] (0, 71)
  [1307872316:854339] [1282/1160603968] CLIENT: Vote Incoming: (eid) 0 (pri) 100 ELECTABLE (gen) 70 (egen) 71 [21,986728]
  [1307872316:854353] [1282/1160603968] CLIENT: Vote existing: (eid) 2147483647 (pri) 100 (gen) 70 (sites) 2 [21,946437]
  [1307872316:854369] [1282/1160603968] CLIENT: accept the new vote
  [1307872316:854379] [1282/1160603968] CLIENT: Election of phase 1 done
  [1307872316:854395] [1282/1160603968] CLIENT: vote for 0
  [1307872316:854407] [1282/1160603968] CLIENT: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 70 eid 0, type vote2, LSN [0] [0] nobuf
  [1307872317:960344] [1282/1192073536] CLIENT: after the phase 2: votes 0, nvotes 1, Europe 2
  [1307872317:960389] [1282/1192073536] CLIENT: Election completed in 1.111809000 sec
  [1307872317:960401] [1282/1192073536] CLIENT: Election; Egen 72
  [1307872317:960412] [1282/1192073536] CLIENT: flag of completed election with-30974, e_th 0, egen 72, 0x282c, e_fl, 0x0, lo_fl 0x0
  Kill me!
  
  
  
  -my source
  
  on the master, I executed manually:
  
  txn_rate 1
  loop_rate 10
  loop 1 20000
  
  ------
  /*-
  * See the file LICENSE for redistribution information.
  *
  * Copyright (c) 2001-2010 Oracle and/or its affiliates. All rights reserved.
  *
  * $Id$
  */
  
  /*
  * In this application, specify us all communications via the command line. In
  * a real application, one would expect that the information on other sites
  * in the system would be maintained in a sort of configuration file. The
  * most of this interface, it is that we assume at the start that we can
  * knowledge
  (* 1) what is our environment home Berkeley DB,.
  (* 2) which host/port we want to hear about the connections. and
  (* 3) an optional list of other sites, we should try to connect to.
  *
  * These items of information are expressed by the following indicators.
  * h House (required; h means home directory)
  *-l host: port (required; l means local)
  * - C or - M (optional; will start as customer or master)
  * r - host: port (optional; r mean distance; no matter how many of them may be)
  * specified)
  * R - host: port (optional; R stands for the remote peer; only one of them can
  * to be specified)
  * - an all the | quorum (optional; a is synonymous with the ACK policy)
  * b (optional; b means in bulk)
  * Europe - n (optional, number of sites in the replication group; default is 0)
  * to try to dynamically calculate Europe)
  * priority Pei (optional; default is 100)
  * - v (optional; v means verbose)
  */
  
  #include < cstdlib >
  #include < a > cstring
  
  #include < iostream >
  #include < String >
  #include < sstream >
  
  #include < sys/types.h >
  #include < signal.h >
  
  
  #include < db_cxx.h >
  #include "RepConfigInfo.h".
  #include "dbc_auto.h".
  
  using std::cout;
  using std::cin;
  using std::cerr;
  using std::endl;
  using std::ends;
  using std::flush;
  using std::istream;
  using std::istringstream;
  using std::ostringstream;
  using std::string;
  using std::getline;
  
  #include < stdio.h >
  #include < readline/readline.h >
  #include < readline/history.h >
  
  #define CACHESIZE (10 * 1024 * 1024)
  #define of DATABASE 'quote.db '.
  #define «quote2.db» base2
  
  const char * progname = "excxx_repquote";
  
  #include < errno.h >
  #ifdef _WIN32
  #define WIN32_LEAN_AND_MEAN
  #include < windows.h >
  #define _snprintf snprintf
  #define sleep (s) sleep (1000 * (s))
  
  extern "C" {}
  extern int getopt (int, char * const *, const char *);
  extern char * optarg;
  }
  
  typedef HANDLE thread_t;
  typedef DWORD thread_exit_status_t;
  #define thread_create (thrp, attr, func, arg).
  (((* (thrp) = CreateThread (NULL, 0,-))))
  (LPTHREAD_START_ROUTINE) ((((func), (arg), 0, NULL)) == NULL)? (1: 0)
  #define thread_join (thr, statusp).
  ((WaitForSingleObject ((THR), Infinite) == WAIT_OBJECT_0) & & \)
  GetExitCodeThread ((thr), (LPDWORD) (statusp))? 0: - 1).
  #else / *! _WIN32 * /.
  #include < pthread.h >
  
  typedef pthread_t thread_t;
  typedef void * thread_exit_status_t;
  #define thread_create (thrp, attr, func, arg).
  pthread_create ((thrp), (attr), (func), (arg))
  #define (thr, statusp) thread_join pthread_join ((thr), (statusp))
  #endif
  
  Struct used to store information in the field of app_private Db.
  typedef struct {}
  bool app_finished;
  bool in_client_sync;
  bool is_master;
  bool no_dummy_wr;
  } APP_DATA.
  
  public static void log(const char *);
  void checkpoint_thread (Sub );
  void log_archive_thread (Sub );
  void dummy_write_thread (Sub );
  
  Class RepQuoteExample {}
  public:
  RepQuoteExample();
  void init (RepConfigInfo * config);
  void doloop();
  terminate() int;
  
  public static void event_callback (DbEnv * dbenv, u_int32_t, void * info);
  void print_stocks_size(Db *dbp);
  
  private:
  disable the copy constructor.
  RepQuoteExample(const RepQuoteExample &);
  void operator = (const RepQuoteExample &);
  
  internal data members.
  APP_DATA app_data.
  RepConfigInfo * app_config;
  DbEnv cur_env;
  thread_t ckp_thr;
  thread_t lga_thr;
  thread_t dmy_thr;
  
  private methods.
  void print_stocks(Db *dbp);
  void print_env(DbEnv *dbenv);
  
  prompt() Sub;
  };
  
  RepQuoteExample * g_runner = NULL;
  RepConfigInfo * g_config = NULL;
  
  Class DbHolder {}
  public:
  DbHolder ( env, const char _dbname DbEnv): env (env)
  {
  DBP = 0;
  If (_dbname) dbname = _dbname;
  else dbname = database;
  }
  
  {~ DbHolder()}
  try {}
  Close();
  } catch (...) {
  Ignore: this may mean that another exception is waiting
  }
  }
  
  bool ensure_open (bool creation) {}
  If (dbp)
  return (true);
  DBP = new Db (env, 0);
  
  u_int32_t flags = DB_AUTO_COMMIT;
  If (creation)
  flags | = DB_CREATE;
  try {}
  DBP-> open (NULL, NULL, DB_BTREE, DATABASE, flags, 0);
  DBP-> open (NULL, dbname, NULL, DB_BTREE, flags, 0);
  DBP-> open (NULL, NULL, dbname, DB_BTREE, flags, 0);
  return (true);
  } catch (DbDeadlockException e) {}
  } catch (DbRepHandleDeadException e) {}
  } catch (DbException e) {}
  If (e.get_errno () == DB_REP_LOCKOUT) {}
  Just fall through.
  } ElseIf (e.get_errno () == ENOENT & &! creation) {}
  Provide a little extra explanation.
  //
  Log ("Stock DB is not still exist");
  } else
  throw;
  }
  
  (All renewable errors pass here).
  //
  Log ("Please try again");
  Close();
  Return (false) End Function
  }
  
  {} void close()
  If {(dbp)
  try {}
  DBP-> close (0);
  Remove dbp;
  DBP = 0;
  } catch (...) {
  Remove dbp;
  DBP = 0;
  throw;
  }
  }
  }
  
  operator Db * () {}
  return of dbp;
  }
  
  DB * operator-> () {}
  return of dbp;
  }
  
  private:
  DB * dbp;
  DbEnv * env;
  const char * dbname;
  };
  
  Class StringDbt: public {Dbt
  public:
  #define GET_STRING_OK 0
  #define GET_STRING_INVALID_PARAM 1
  #define GET_STRING_SMALL_BUFFER 2
  #define GET_STRING_EMPTY_DATA 3
  int get_string (char * buf, size_t buf_len)
  {
  size_t copy_len;
  int ret = GET_STRING_OK;
  If (buf == NULL) {}
  ECRR < < "Invalid entry to get_string stamp" < < endl;
  Return GET_STRING_INVALID_PARAM;
  }
  
  Make sure that the string is null terminated.
  Memset (* buf, 0, buf_len);
  
  If there is no string, simply return.
  If (get_data() == NULL | get_size() == 0)
  Return GET_STRING_OK;
  
  If (get_size() > = buf_len) {}
  RET = GET_STRING_SMALL_BUFFER;
  copy_len = buf_len - 1; save room for a terminator.
  } else
  copy_len = get_size();
  memcpy (* buf, get_data(), copy_len);
  
  return ret;
  }
  size_t get_string_length()
  {
  If (get_size() == 0)
  return 0;
  Return strlen ((char *) get_data());
  }
  Sub set_string(char *string)
  {
  SET_DATA (String);
  set_Size ((u_int32_t) strlen (String));
  }
  
  StringDbt(char *string):
  DBT (string, (u_int32_t) strlen (string)) {};
  StringDbt(): Dbt() {};
  ~ StringDbt() {};
  
  Do not add additional data to this subcategory because we want to keep it
  compatible with objects Dbt created in-house by Berkeley DB.
  };
  
  DB * g_repquote = NULL;
  
  RepQuoteExample::RepQuoteExample(): app_config (0), cur_env (0) {}
  App_Data.app_finished = 0;
  App_Data.in_client_sync = 0;
  App_Data.is_master = 0; Suppose I have as a customer initially
  App_Data.no_dummy_wr = 0; prevent to run dummy writing
  }
  
  /*
  int (* old_rep_process_message)
  __P ((DB_ENV *, DBT *, DBT *, int, DB_LSN *));
  
  int my_rep_process_message __P ((DB_ENV DBT, arg1 , arg2, arg3, arg4 int, DB_LSN $arg5 DBT))
  {
  printf ("EZ-> > > my_rep_process_message:%p\n",arg5 ");
  old_rep_process_message (Arg1, Arg2, Arg3, Arg4, $arg5);
  }
  */
  
  void RepQuoteExample::init(RepConfigInfo *config) {}
  app_config = config;
  
  cur_env.set_app_private (& App_Data);
  cur_env.set_errfile (stderr);
  App_Data.no_dummy_wr = config-> no_dummy_wr;
  If (app_data.no_dummy_wr)
  printf ("no dummy! \n");
  
  EZ-> cur_env.set_errpfx (progname);
  cur_env.set_event_notify (event_callback);
  
  Configure the transfer block to send groups of documents to customers
  When a single network transfers. This is useful for sites of masters
  and customers participating in the synchronization from client to client.
  //
  If (app_config-> in bulk)
  cur_env.rep_set_config (DB_REP_CONF_BULK, 1);
  
  Set the total number of sites in the replication group.
  It is used by the treatment of election internal repmgr.
  //
  If (app_config-> totalsites > 0)
  cur_env.rep_set_nsites (app_config-> totalsites);
  
  Turn on the output of debugging and application information.
  If (app_config-> verbose)
  cur_env.set_verbose (DB_VERB_REPLICATION, 1);
  
  cur_env.set_verbose (DB_VERB_REPMGR_MISC, 1);
  cur_env.set_verbose (DB_VERB_RECOVERY, 1);
  cur_env.set_verbose (DB_VERB_REPLICATION, 1);
  cur_env.set_verbose (DB_VERB_REP_ELECT, 1);
  cur_env.set_verbose (DB_VERB_REP_LEASE, 1);
  cur_env.set_verbose (DB_VERB_REP_SYNC, 1);
  cur_env.set_verbose (DB_VERB_REPMGR_MISC, 1);
  
  Set the priority of replication for this environment group election.
  An election first selects the site with the most recent log
  documents such as the new master. If several sites are the most
  recent log records, the site with the highest priority value
  is selected as the master.
  //
  cur_env.rep_set_priority (app_config-> priority);
  
  Set the policy that determines how master and client sites
  treat the acknowledgment of replication messages required for
  permanent record. The default policy of "quorum" requires only
  a quorum of the likely to be elected peers sufficient to ensure a permanent
  record remains durable if the election is held. The option 'all '.
  requires that all clients to recognize a permanent replication
  message instead.
  //
  cur_env.repmgr_set_ack_policy (app_config-> ack_policy);
  
  Set the threshold for the minimum and maximum of the client time
  wait before asking the retransmission of a missing message.
  These core values on the characteristics of performance and load
  host master and client as well as the tower platforms
  message trigger time.
  //
  cur_env.rep_set_request (20000, 500000);
  
  Configure the detection of blockages to ensure that blockages of locks?
  are broken by the presence of one of the queries of locks in conflict
  has rejected. DB_LOCK_DEFAULT uses the specified lock strategy
  at the time of the creation environment or DB_LOCK_RANDOM if none has been
  specified.
  //
  cur_env.set_lk_detect (DB_LOCK_DEFAULT);
  
  The following features of the basic replication can also be useful to your
  request. See Berkeley DB documentation for more details.
  -Master leases: strict consistency for data reads
  on a main site.
  -Delivery time: Customize the amount of time that waiting for Berkeley DB
  for such things as the election must be concluded or a master
  lease to be granted.
  -Client synchronization delay: managing the main site
  resources by spreading intensive customer resources
  synchronizations.
  -Blocked customer operations: return immediately with an error
  rather than wait indefinitely if a customer is operation
  blocked by a current client synchronization.
  
  cur_env.repmgr_set_local_site (app_config-> this_host.host,
  app_config-> this_host.port, 0);
  
  for (REP_HOST_INFO * cur = app_config-> other_hosts; cur! = NULL;)
  Cur = cur-> next) {}
  cur_env.repmgr_add_remote_site (cur-> host, cur-> port,
  NULL, cur-> peers? DB_REPMGR_PEER: 0);
  }
  
  Configure heartbeat timeouts so that repmgr monitors the
  health of the TCP connection. Master sites disseminate a heartbeat
  at the frequency specified by the timeout DB_REP_HEARTBEAT_SEND.
  Customer sites waiting for activity of the messages of the length of the
  DB_REP_HEARTBEAT_MONITOR timeout before concluding that the
  connection to the master is lost. The DB_REP_HEARTBEAT_MONITOR
  timeout must be longer than the time-out DB_REP_HEARTBEAT_SEND.
  //
  cur_env.rep_set_timeout (DB_REP_HEARTBEAT_SEND, 5000000);
  cur_env.rep_set_timeout (DB_REP_HEARTBEAT_MONITOR, 10000000);
  
  The following features of repmgr can also be useful to your
  request. See Berkeley DB documentation for more details.
  -Regulates two sites of strict majority - in a two-site replication
  the group, to ask the two sites are available to elect a new
  master.
  -Timeout - customize the amount of time repmgr awaits
  for things as pending or try thanks
  to reconnect to other sites.
  -The site list - returns a list of currently known sites at repmgr.
  
  Now we can open our environment, although we are not ready to
  start replication. However, we want to have a dbenv autour
  so that we can send it in one of our message handlers.
  //
  cur_env.set_CacheSize (0, CACHESIZE, 0);
  cur_env.set_flags (DB_REP_PERMANENT, 1);
  cur_env.set_flags (DB_TXN_WRITE_NOSYNC, 1);
  
  / * u_int32_t maxlocks = 300000;
  If (maxlocks! = 0)
  cur_env.set_lk_max_locks (MAXLOCKS);
  
  u_int32_t maxlocks_o = 300000;
  If (maxlocks_o! = 0)
  cur_env.set_lk_max_objects (maxlocks_o);
  
  u_int32_t maxmutex = 300000;
  If (maxmutex! = 0)
  cur_env.mutex_set_max (maxmutex);
  */
  
  DbEnv * m_env = & cur_env;
  m_env-> set_flags (DB_TXN_NOSYNC, 1);
  m_env-> set_lk_max_lockers (60000);
  m_env-> set_lk_max_objects (60000);
  m_env-> set_lk_max_locks (60000);
  m_env-> set_tx_max (60000);
  
  m_env-> repmgr_set_ack_policy (DB_REPMGR_ACKS_NONE);
  
  m_env-> rep_set_timeout (DB_REP_ACK_TIMEOUT, 50 * 1000); 50ms
  m_env-> rep_set_timeout (DB_REP_CHECKPOINT_DELAY, 0);
  m_env-> rep_set_timeout (DB_REP_CONNECTION_RETRY, 30 * 1000 * 1000); 30 seconds
  m_env-> rep_set_timeout (DB_REP_ELECTION_TIMEOUT, 1 * 1000 * 1000); 5 seconds
  m_env-> rep_set_timeout (DB_REP_FULL_ELECTION_TIMEOUT, 5 * 1000 * 1000); 5 seconds
  m_env-> rep_set_timeout (DB_REP_CONNECTION_RETRY, 5 * 1000 * 1000);
  m_env-> rep_set_timeout (DB_REP_ELECTION_RETRY, 10 * 1000 * 1000); 10 seconds
  
  m_env-> rep_set_timeout (DB_REP_HEARTBEAT_MONITOR, 80 * 1000 * 1000); 80 seconds
  m_env-> rep_set_timeout (DB_REP_HEARTBEAT_SEND, 500 * 1000); 500 milliseconds
  
  The minimum number of microseconds that a client will wait before requesting a retransmission
  u_int32_t rep_req_min = 40000; 40 000 microsec = 40 mili
  The maximum number of milliseconds that a client will wait before requesting a retransmission
  u_int32_t rep_req_max = 1280000. / / 1 280 000 microsec = 1.28 sec
  
  u_int32_t rep_limit_gbytes = 0;
  u_int32_t rep_limit_bytes = 100 * 1024 * 1024; 100 MB
  m_env-> rep_set_request (rep_req_min, rep_req_max);
  m_env-> rep_set_limit (rep_limit_gbytes, rep_limit_bytes);
  
  
  cur_env. Open (app_config-> homepage, DB_CREATE |) DB_RECOVER |
  DB_THREAD | DB_INIT_REP | DB_INIT_LOCK | DB_INIT_LOG |
  DB_INIT_MPOOL | DB_INIT_TXN, 0);
  
  keep the old string function
  old_rep_process_message = cur_env.get_DB_ENV ()-> rep_process_message;
  deviant
  cur_env.get_DB_ENV ()-> rep_process_message = my_rep_process_message;
  
  / * int _i;
  cur_env.log_get_config (DB_LOG_DIRECT & _i); printf ("DB_LOG_DIRECT = %d\n",_i);
  cur_env.log_get_config (DB_LOG_DSYNC & _i); printf ("DB_LOG_DSYNC = %d\n",_i);
  cur_env.log_get_config (DB_LOG_AUTO_REMOVE & _i); printf ("DB_LOG_AUTO_REMOVE = %d\n",_i);
  cur_env.log_get_config (DB_LOG_IN_MEMORY & _i); printf ("DB_LOG_IN_MEMORY = %d\n",_i);
  cur_env.log_get_config (DB_LOG_ZERO & _i); printf ("DB_LOG_ZERO = %d\n",_i);
  */
  
  Start checkpoint and newspaper archive support threads.
  (void) thread_create (& ckp_thr, NULL, checkpoint_thread, & cur_env);
  (void) thread_create (& lga_thr, NULL, log_archive_thread, & cur_env);
  (void) thread_create (& dmy_thr, NULL, dummy_write_thread, & cur_env);
  
  cur_env.repmgr_start (3, app_config-> start_policy);
  }

  The detailed output shows that the site has won the election and the
  RepMgr code calls rep_start to become the master, but he is stuck
  waiting for a txn or a cursor to be resolved before this change of State
  may occur. I have not studied your application code. But if you have a
  cursor or txn, underway at the time, then you must resolve before
  the site may change the State.

  If you can reproduce this, it would be useful to see the stack traces
  the threads. That could confirm or deny that, in my view, I see.

  Sue LoVerso
  Oracle

• How I find myself with two passwords to iCloud for the same account?

  How I find myself with two passwords to iCloud for the same account?

  For security reasons, I only use iCloud for Contacts and "find my iPhone".

  Several months ago Apple forced me to change my password to iCloud.  So I did this.   In the last months, I used successfully the new password to 10 or 12 times when asked without problem.

  However, I received a notification of a software update for my Apple Watch. I did the update without problem. However, after completing the update my iPhone asked me to connect to my iCloud account. When I did this, she rejected my password. I made 4 attempts typing very slowly and with care for you sure I did it right.

  Then, operating under a hunch, I decided to enter my old password to iCloud. It worked?  I'm confused about this, any ideas would be appreciated.

  I had a similar problem last year. I had to call Apple. Contact is a bottom of this page.

• FGV with two types of variables

  It goes something like this

  I want the FGV having a cluster of two tables 1 d of double (which will be the variable of the FGV). and the data that I am 'Add' is a double issue / constant (whatever), it will be the additional variable.

  the main idea is that I want to be able to choose to which one of the two i added the extra number and I think that it is quite easy to achieve with a simple Boolean control (reference) and the structure of the case, that's what I did.

  the problem is that if I what that it either does not connect the FGV labview shift register does recognize as the FGV variable, that I have just described, and if I do, it's an extra entry which I don't want to use it later.

  in theory, I can do my extra variable to be also a cluster with two tables 1 d of type double, however, given that my entry has a single issue, I do not know how to accomplish it.

  Thanks in advance.

  It would be good to know if something like this is even possible. (first option)

  
  

• Can someone help me with two questions regarding my PowerShot SX540HS?

  I'm generally pretty tech savy, but I'm having problems with two very basic functions on my PowerShot SX540HS.  I downloaded the complete operating manual and followed the instructions to the two questions, but I am unable to answer these questions after a lot of testing with the camera settings.

  1. is it possible to force the flash to the position, but keep any AUTO value? (I need an additional light on the African-American faces when shooting outdoors).  The manual States that there should be a setting IT for flash, but all I see is auto flash or disabled.  I don't see a setting IT allows me to force the flash fires.

  2. I need help with how to set up the camera to focus on how to features of landscapes in the background (such as a mountain range) instead of focus on something more about that appears in the frame, perhaps some leaves from a nearby tree.  When I tried testing the manual focus by following the instructions in the manual and set the focus to infinity, ISO camera settings went haywire and I got a completely overexposed photo.

  I'd appreciate any help.  I thank you very much.

  Your welcome!

  The brightness problem is your camera set to have the i-contrast on Auto? If this is not the case, try this to fix the bightness of images that you have taken or will take.

  You can of course put the ISO and shutter speed manually too in P mode for pictures where I contrast does not work well for you.

  P mode is basically the Auto mode, but it allows you to make changes where you want.

• With W - XP and a utility 6540dt, why it prints black (bakkup) with two LDTC wet ink?

  Someone out there:

  I'm under Windows XP and using a HP Deskjet 6540dt printer.  I removed two LDTC (ink cartridges) which indicated down and replace them with two new HP Inkjet LDTC and the printer indicates it will only print black ctg in backup modeusing.   This got me puzzzled.   I deleted the drivers and reinstalled from a CD disc (part No. C8963-10001) HP   after reinstall the drivers, the printer still prints with the onlyblack print cartridge.  I was super confused.

  I am running AVG free edition , and Microsoft Security Essentials and have even unintalled them then turing the driver for the Modem from Verizon to reintall the HP Deskjet 6500 series and still no luck I thought that the firewall can interfere with the installation.  He does not appear.

  What do you think is the problem?.    I have the installation disc at home MS W - XP original (not a recovery disk) and have all the dates of arrival and Service Pack (SP-3).

  I'll have to take the computer and printer to a repair (specialist) {no BestBuy or Geeks or Office Depot} man or can I fix it myself. ??   If I can fix it myself, you please give me instructions step by step IE: A: cela;  B: do;    etc.

  The specialist repairer should have renovated th ? printer

  Thanks in advance for your input

  Completely confused

  Hello

  I suggest you try the steps from the following link:
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00219782&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=357211

  Additional information:
  Troubleshooting print quality problems
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02046460&LC=en&cc=emea_middle_east&DLC=ar&product=357211

• S271HL - demand guarantee, she needed no repair - I'm back with the same problem

  Earlier, I sent a S271HL monitor for repair under warranty.  The issue was that the screen would not activate and the only thing that happened was an orange power flashing instead of a constant blue button button.  The problem is that I got, with the same problem that I sent him.

  I am the home monitor today.  The first two pages of order of service, under the description of the problem, I see:

  said c:CX dsnt unit turn on, only a power light flashes

  a: do you have a self test, no go, so informed the cs repair, cx agreed

  r: at the request of the unit for repair

  On the second page, I see this:

  Computer data. Accessories
  No accessories (No. Box)

  Software & other remarks:
  surface scratches, no power

  (Note to this poster: surface scratches?)  Where?  I treated this monitor as it was made of Crystal.)

  Diagnosis / repair:

  Reported problem not noted.  Monitor power towards the top with good screen, stable.  Monitor adopted system intensive burnin test over the weekend, more than 63 hours, without any problem.  At the end of the extensive, intensive, powered burnin test monitor then turn it several times; always under tension with a display of good and stable, no problems noted.  In the course of trials, powered monitor then turn it several times; always constantly lit with a good and stable display.

  ===============

  So, my friend has a supply for his Acer monitor (a smaller one) that has 19v and 2. 1 has, just like mine.  So I borrowed her power to test my monitor and I had the same problem: an orange power button flashing.

  So the question is: has anyone ever encountered this with Acer?  I'll call them, but I wanted to see if there was any opinions here at the same time.

  It seems that this has not worked for the first tester and launched up to more away for another tech fix, but when that tech he walks, it worked fine. I have been a mechanic my whole life, in many areas, and I saw this scenario several times. There is also the possibility that someone got lazy, but you can not prove it so just contact warranty service again and tell them that they must resume and attach it.

• HD with two partitions, H:Basic in C:Basic with NTFS and Fat32

  My office have unique u HD with two partitions. H: 6.99 GB with FAT32 and the C: with 143 GB and NTFS system. My system works only on drive H: it almost full during the 6.60 GB GB C: 3 busy with that and the rest empty.
  I already have the Win XP SP2 system and can no longer operate the lack of space on the H: drive
  Please how can I fix this problem in my pc

  I'm sory Mr. Noel, I have a question

  When I Higlight the M0 H: partition click on resize.

  After checking me open a window: resize with the partition information, size = 6142 MB, minimum size = 5897 MB and max size = 142629 MB in the center of the window "new format" due to its size than now, size minimum changes for your size permittedtheir max, what am I doing here?

  Thank you

• When you add pictures to the Vista image folder it creates a folder HIDDEN of the same name with two copies of the same image inside

  I use Vista 32 bit. I started to see this problem when I recently copy photos from an SD card.

  When you add pictures to the Vista image folder it creates a folder HIDDEN of the same name with two copies of the same image inside

  I saw hidden files enabled in folder options.

  Any help is appreciated.

  Hey guys... I found the answer... Problem is with the software vaio content analyzer that comes with the vaio...

  It just search for Vaio Content Analyzer (parameters) and deselect
  
  Video analysis
  image analysis
  analysis of the music

  I went looking for this crazy thing... used almost all types of online scan, and finally to find that it is caused by an internal software only...
  anyway thanks to all... Hope it helps someone in the future :)

• TV LCD W2607C with the same problem of power W2600

  My Dell W2607C LCD TV has even no power problem. I had less than 3 years and have had very good care of it. I stop it after watching some tv to go with dinner. Two hours later I tried to turn it on and I have nothing. Not even a blink on the LCD. Power LED turned blue, then blinked orange.

  A week ago, I finally called Dell customer service. Of course, I've been waiting for about 20 minutes. After giving all pertinent information about my Dell 26 '' LCD/TV, the operator (in English very hilly, I might add) guided me through all the troubleshooting steps I had done. None worked troubleshooting.

  She tried pulling the line 'contact your cable operator' old, but I told her that the cable is fine cause it is also plugged into a second TV. She then tried to explain since it was out of warranty he could not replace. I did not stay in there and started to explain how Dell sold me a defective product and that I have LCD screens and televisions last more than 2 years and how it was unfair for a loyal customer to treat them that way. She then tried to send me to another service of technical support, but the only difference is they were going to charge me. I said 'No' and then asked his supervisor.

  He tried to give the same line on 'out of warranty' and I told him that this is not an uncommon problem and if you google "Dell 26 '' TV does not turn on", he would see that there are a large number of consumers out there with the same problem as me.

  He then said, "Oh but the problem you have raised is the 2600 series model not yours, yours is the 2607C.» I answered, without hesitation, "but it is still part of the same series, is - not? And it seems that the same problem was overlooked when they made the one I bought. »

  I was told someone to a "higher authority" would contact me, but their calls have been rather erratic and I can't return their calls only leave voicemails. I get emails telling me how they just tried to call and when they say they would call between some time next, I end up wasting time to wait for a call that never comes.

  As a last resort, I post here in the hope that I get response and are not facing customers by service script.

  I ordered from Dell recently, his good faith. If I'm stuck with a very expensive paperweight, I might as well made my recent purchases and cut all ties with Dell completely.

  
  

• Double screen with two VGA monitors (model Inspiron 620)

  Hello

  I have an Inspiron (processor i5-2320 @3 GHz) 620 office. The graphics card is AMD Radeon HD 6450.

  With two displays analog VGA, I wanted to dual monitor.

  My problem is that the Office does not recognize the two vga monitors but that one monitor. Vga ports (I have two) on the desktop do not work at the same time.

  So, I tried to use the DVI port, but it is only allowed to use DVI - D (I thought I'd use two monitors if allowed the graphics card DVI connector VGA). DVI - D deosn seem to allow analog monitors.

  Currently, I only use one of the two with an analog monitor vga ports.

  I wonder if I should buy the new digital monitor that can be connected to the DVI - D port.

  Or is there a method to use both on the desktop vga ports?

  riofunk7,

  You have two options...

  (1) connect both monitors to the ports added discrete video card
  (2) connect a monitor to the integrated VGA port. Connect the other monitor to the additional port of discrete video card
  * Reboot the system
  * Press F2
  * Navigate to Advanced-Graphics Configuration
  * Activate Intel several monitor function
  * Press F10 to save your changes and exit the bios

• HSRP with GRE ipsec problems

  I have the following scenario to connect my main HQ with other directorates:

  Two routers HQ and work by their internal Giga HSRP interface and use WAN connections by serial interfaces to create VPN site-to-site with other branches using GRE over ipsec.

  I need to know is - right configuration or there is another way to do.

  the following sample configuration on both active and standby routers and router for branch

  Active router

  ISAKMP crypto key password address 172.18.x.x

  Crypto ipsec transform-set aes aes - esp esp-sha-hmac

  Crypto card secure ipsec-isakmp 13
  the value of 172.18.x.x peer
  Set transform-set aes
  match address 101

  interface Tunnel3
  Description branch01
  IP 10.100.30.1 255.255.255.0
  KeepAlive 10 3
  source 10.100.0.x tunnel
  destination 172.18.x.x tunnel
  secure cryptographic card

  interface GigabitEthernet0/0
  IP 10.100.0.y 255.255.255.0
  automatic duplex
  automatic speed
  Watch 1 ip 10.100.0.x
  1 standby preempt

  point-to-point interface Serial0/0/0.16
  IP address 172.20.x.x 255.255.255.252

  secure cryptographic card

  access-list 101 permit will host 10.100.0.x host 172.18.x.x

  Standby router

  ISAKMP crypto key password address 172.18.x.x

  Crypto ipsec transform-set aes aes - esp esp-sha-hmac

  Crypto card secure ipsec-isakmp 13
  the value of 172.18.x.x peer
  Set transform-set aes
  match address 101

  interface Tunnel3
  Description branch01
  IP 10.100.30.3 255.255.255.0
  KeepAlive 10 3
  source 10.100.0.x tunnel
  destination 172.18.x.x tunnel
  secure cryptographic card

  interface GigabitEthernet0/0
  IP 10.100.0.z 255.255.255.0
  automatic duplex
  automatic speed
  Watch 1 ip 10.100.0.x
  1 standby preempt

  point-to-point interface Serial0/0/0.16

  IP address 172.19.x.x 255.255.255.252

  secure cryptographic card

  access-list 101 permit will host 10.100.0.x host 172.18.x.x

  Branch router

  ISAKMP crypto key password address 172.20.x.x
  ISAKMP crypto key password address 172.19.x.x
  ISAKMP crypto key password address 10.100.0.x

  Crypto ipsec transform-set aes aes - esp esp-sha-hmac

  Crypto card secure ipsec-isakmp 13
  the value of 172.19.x.x peer
  the value of 172.20.x.x peer
  Set transform-set aes
  match address 101

  interface Tunnel3
  Description branch01
  IP 10.100.30.3 255.255.255.0
  KeepAlive 10 3
  tunnel source 172.18.x.x
  destination of the 10.100.0.x tunnel
  secure cryptographic card

  point-to-point interface Serial0/0/0.16
  IP address 172.18.x.x 255.255.255.252
  secure cryptographic card

  access-list 101 permit will host 172.18.x.x host 10.100.0.x

  I had lots of massages of error with active or standby router and all the VPN settings are correct to the routers of the AC and branches

  % CRYPTO-6-IKMP_MODE_FAILURE: the mode of information processing failed with the peer to 172.18.x.x

  In your current design, I can see HSRP used to provide evacuation route VPN HA outwards.  IPSec plan HA, HSRP is usually deployed when the Wan is attached Ethernet.  In this case, we can build the tunnel using the virtual address HSRP giving a permanent IP address.  The problem with your design, is that to reach the HSRP virtual IP address, you must cross a single hosted serial interface. If this interface is unsuccessful or if there is a problem in the path routed between cryptographic peer, you will never be able to reach the HSRP virtual IP address so the resulting solution will fail.

  If it is the topology we work with, so the only recommendations I can do is to incorporate IP SLAS and followed in your design.  For example, you may track the status of the interface the main router series.  If the interface fails, you could decrement the HSRP interface boot priority in order to force traffic to converge on the backup router path.  With star-ISAKMP KeepAlive configured on the routers in topology, routers should be able to recognize the failure and the timeout of the old SAs.  Because the RADIUS is configured with two counterparts, the router can negotiae new SAs with the backup router.  When the serial interface comes back online, you can have the main router anticipate waking after a delay.  To detect indirect failures on the transit route, you could use ICMP IP SLA and monitoring instead.  This design, however, will be properly tested for stability during the failover process.