is 4S charging head compatible with 6 s, but with a lightning cable

Similar Questions

• Where can I find what kind of phone charges are compatible with the CMF?

  I've recently updated one of our CME to CME v10.0 systems

  I noticed that even if CMEv10 the Firmware support page shows how compatible phone for my 7911 phones is 9-2-1TH1-13,

  My 7911 running load phone 8-4-3-16 that all seem to be save and it works very well.

  So I must conclude that 7911 phone charging 8-4-3-16 is compatible with GCE v10.0

  Where can I go to find out what kind of phone charge versions are compatible with GUY or perhaps, at least, where I can find loads what kind of phone are no longer supported by a version of the CME?

  Hi Jared,

  Specific versions of CMF are tested with the versions listed on the doc "requirements" as you mentioned (linked below), but are not limited to these versions of firmware. The phone charges/firmware is completely independent of the CME/IOS version. And it is often appropriate to upgrade or downgrade the firmware of the phone on CME levels and is fully supported :)

   
  http://www.Cisco.com/en/us/docs/voice_ip_comm/cucme/requirements/guide/c...

  I would look at the upgrade of the firmware 8-4-3 for the 7911 BUT you need go to an intermediate version of the midpoint as 8-5-2 at first because of the "important notes" below;

  Questions for SCCP firmware update

  Note for all the firmware updates SCCP firmware version versions prior to 8.3 (3) for version 8.5 (3) or higher, you must first upgrade your firmware to version 8.5 (2). Once you have upgraded to version 8.5 (2), you can upgrade your IP phone to version 8.5 (3) or later.

  http://www.Cisco.com/en/us/docs/voice_ip_comm/cuipph/firmware/8_5_3/English/release/notes/7900_853.html#wp57602

  See you soon!

  Rob

• Kodak in a 2150 does not print wireless. compatible with the usb cable. Help

  My printer prints not my lap top. It works already. I uninstalled the program and reinstalled and it still does not print. I turned off the printer for a minute and I turned my router for a minute and they turned back. I don't know what else to do. Help, please.

  See if it helps:

  Lost on printer all-in-one Wi - Fi
  http://support.en.kodak.com/app/answers/detail/A_ID/2741/selected/true

  The guests to answer and follow the troubleshooting.

• The first generation wireless charger Apple Watch will be compatible with series 2 Watch?

  Apple Watch of first-generation wireless charger won't be compatible with the new watch series 2? I just have to make sure before I buy a new charger wireless with my new watch.

  I guess it will be. There is no differentiation in store for the accessories of the watch.

• I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  Probably there is debris and dust in the decision-making of the lightning.  Serve with compressed gas canned (NEVER orally).  If this doesn't help, try electronic contact cleaner has a q - Tip.  Finally, take it to Apple.

• Apple Watch magnetic charging Dock is compatible with the adapter USB 12W power and if so, is the adaptor 12W shorten the charging time?

  Apple Watch magnetic charging Dock is compatible with the adapter USB 12W power and if so, is the adaptor 12W shorten the charging time?

  Yes and no.

• I2/I3 magnetic charger compatible with Z3C?

  The Thailand just the Z3C this last week and I bought one today.  There is no true "Sony Stores", but I bought in a store licensed to Sony and asked about a magnetic charger, I can see it getting old real quick to keep flipping open the lid of the charger to the USB charger.  They said charger mag Z2 was compatible with the Z3, but not with Z3C.  They don't have one in stock, but are planning to get a few "ARS".

  If I2/I3 mag charger is NOT compatible, a mag Z1C charger compatible?

  In addition, there is any rubber "bumper" as for iPhones?  I am upgrading to an iPhone4 and really liked having the rubber bumper to protect the phone when he puts on a hard surface, especially if I drag and drop it.  I would have preferred a 'bumper' rather than a 'case', but a case would be Plan B.  Impossible to find all the stores with a compatible box Z3C yet, but I don't know that it won't take long.  BUT... the Z3C rubber bumpers?

  DK31 cord has the orientation frames on the pins. If you inspect them closely, they are not identical. You cannot plug it otherwise even when it is used outside of the docking station.

  Regarding the cable itself, it is the same cable and Connector for Z1C Z1, Z2, Z2, Z3, Z3C, Z3 Tablet tablet.

  I use it for Z1C, Z1 and Z2 Tablet.

  You can just buy DK31, remove the two screws from the bottom, remove the cable and use it for your Z2 and Z3C.

• Why use my original USB cable charger for more than a year now is startig to show a sign that it is not compatible with the device? o

  I used without problem my USB cable for over a year, it is original Apple and yesterday began to show a sign that it is not compatible with the device. How can not be supported if it's Apple.

  This can occur if the cable is damaged in any way. See: recharge your iPhone, iPad and iPod touch - Apple Support for more information.

• OfficeJet Pro 8600 Plus: is the Officejet Pro 8600 wireless compatible with the new standard AC dual routers.

  ISP is the Modem upgrade to DOCSIS 3.0 model. My current router, Linksis E 3200 is not fully compatible with the new modem, I have to upgrade to a model of AC Smart WiFi dual band.

  The wireless in this 8600 printer is compatible with the standard AC. If this is not the case, can it be upgraded via download to make the wireless compatible. Top of my head I have think.

  The wireless connection in the Officejet Pro 8600 is compatible with 802.11n connection on the 2.4 Ghz band.  Check your new router (or candidates for a new router), most routers AC will be also in charge of N connections.

• New 12 watts of power adapter compatible with iPad air 2?

  Is the new adapter of 12 watts of power which is delivered as an accessoriy with iPad compatible with iPad Pro 2 air or it will overheat the battery?

  Thank you

  It is very good.  I use my indiscrimantly brick power 12w with my iPad 2 Air and big-screen iPad Pro.  Output one is always in standard USB 5v and the iPad itself will regulate the current in the charging system.  http://www.Apple.com/power-adapters/ the only difference is 2. 1 out of note on the 2 and 10w. 4 a rating on the 12w, but the device regulates what current is used for billing.

• security of Norton says that my google toolbar is infected with a virus and I can't move to a newer version, because it is not compatible with firefox 5 or newer, what should I do?

  In the menu tasks of my norton Security window, there is a place to check protection against vulnerabilities. One of the concerns that he has an infection in my toolbar on firefox. He suggests that the best way to resolve was made to upgrade to a new version og. google, because as the still there is apparently no problem for it. When I tried to upgrade to a new version of google to cancel the former an open window and told firefox or most recent is not compatible with it. They said that I should either download something from firefox to fix or connect with firefox. Ido know even where to start, not very informed on the problems of this kind. / your help would be very appreciated. What should I do?

  You can use firefox 3.6, which is old, but always taken in charge and course. However, the best solution is to renounce the use of Google Toolbar because Google no longer support this with firefox, mainly because he has little to offer.

  You can always google bookmark by copying in Firefox. Please take a look at

  • Is Google Toolbar is no longer compatible with Firefox - here's some alternatives < - clickable link.
    What can help with ideas and solutions.

  I hope that the Norton report, you make reference to simply says that your system has vulnerabilities, rather that he suffers from a real infection (or that he has treated or quarantined malware).

• What CD/DVD drive is compatible with the Satellite A10 S103

  I use the laptop Toshiba Satellite A10 S103 and I am about to replace the CD/DVD-ROM drive of origin by a new who can also write CDs and DVDs.

  However, I got a notice, that after the installation of the new DVD to drive the "IDE #1 error" message may appear. According to my knowledge, this error can be avoided by replacing the old disk with a new one which requires the same Primary/Secondary Master/Slave/cable select settings like old.

  Can you recommend a drive of DVD - RW which could replace the old DVD - ROM drive and would work without any additional adjustment of HW?
  The new DVD - RW drive should be similar to know
  [http://www.sonynec-optiarc.de/en/exhibits/slim-line-drives/ad-7540a.html].

  However, I was not able to decide that if this device will be or does not work in my computer that I don't know the parameters of the original DVD.

  My original Toshiba DVD drive information as follows:
  ' 1. ' "model SD-C2612
  2 "ROM worm." 1315
  3 'serial No.' 394N002659
  ' 4. ' 302 ' version number.

  The computer is already out of warranty

  Thank you.

  > However, I got a notice, that after the installation of the new DVD drive "IDE #1 error" message may appear. According to my knowledge, this error can be avoided by replacing the old disk with a new one which requires the same Primary/Secondary Master/Slave/cable select settings like old.

  You are right. FDI #1 error is displayed because the BIOS doesn't recognize the new internal CD/DVD drive because of the wrong master/slave/c-salt settings.
  Usually, these settings are fixed and cannot be changed on the external sides with another position of the rider.
  The firmware controls the notebooks internal parameters ODD.
  The use of ratings taken in charge and compatible is so very important.

  Sorry, but I didn t find details of compatible CD/DVD players.
  Did you look in the user manual of your laptop series?

  In my manual, I found some info on my laptop-compatible players.
  So maybe you are a lucky man and your owner's manual will provide useful information.

• Shining path App is not compatible with A6000?

  Why this fantastic app is only compatible with two Sony cameras? They're going to make it compatible with more of their line-up alpha mirrorless cameras?

  Hi Iso_morphic,

  Thank you very much for taking the time to share your concerns with us. Sony takes the voice of our customers very seriously and heard all the feedback - good and bad is important to us. I forwarded your comments to our head of our investment in the media because she is always grateful for this type of feedback. While our media plans are confidential, I can tell you that Sony highly values our customers and their opinions and we do not want to get away from our brand.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• Web JetAdmin 10.3.96073: HP Web JetAdmin is not compatible with Windows 10?

  The HP WebJetAdmin client is compatible with Windows 10? I start HP Web JetAdmin 10.3.96073 (10.3 SR8) on a Windows Server 2008 R2 server.

  Today, I tried for the first time load the HP Web JetAdmin console on my machine Windows 10 and to the "customer charge component: DAV supplies UI" step, I get the error "an unexpected error was encountered. The customer will be closed. »

  This happened on 10.3 SR7, I improved, so there is still. People get this to load Windows 10?

  The customer care perfectly fine on the server from localhost, but also one of my boxes of Windows 8. Just does not load on Win10.

  Hello

  The Client lightweight HP WebJetAdmin supports currently up to Windows 8.1, Windows 10 not yet supported.

  You can find the guide below, this is the last version that referred to the current Installer, version 10.3 SR8, as you can see listed on page 3:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c01857435

  Kind regards

  Shlomi

• What processors are compatible with the HP G62-b09SA notebook PC.

  What processors are compatible with the HP G62-b09SA notebook PC. Also I'm under 64-bit Windows, but on the HP website, it indicates that the maximum amount of memory is 4 GB, why?

  Hello

  Here is the link to the service manual for your laptop

  http://h10032.www1.HP.com/CTG/manual/c02542102.PD

  See page 1 for a list of supported and also taken processors on this page under the heading memory, it is said that the laptop can support up to 8 GB of memory.

  Paul