is - a mc at the beginning of 2008 pro compatible with sierra?

is - a mc at the beginning of 2008 pro compatible with sierra?

After no.

https://www.Apple.com/MacOS/how-to-upgrade/

"Mac Pro (mid-2010 or more recent).

Tags: Mac

Similar Questions

  • My internal camera on my MacBook at the beginning of 2008 Pro does not work

    My internal camera on my MacBook at the beginning of 2008 Pro does not work.

    One of them will solve your problem of camera:

    (1) If your Mac restart does not solve the problem,

    (2) use http://support.apple.com/kb/HT2090 from Apple.

    (BTW - troubleshooting section called an "iSight" camera.  However, after that article was published, Apple has changed the name of the built-in camera on the recent "iSight" Macs "FaceTime", then "FaceTime HD."  Whatever the name of your built-in camera, the same info and troubleshooting applies.)

    Be sure to test several Apple app (photo booth, FaceTime, iMovie, QuickTime Player, etc.) in more than one user account.  Do NOT use the 'Guest' for this test account.  If you don't have more than one user account for testing, create one now.  If you need help, how is explained in http://support.apple.com/en-us/HT201754.

    A 'Standard' user account is all you need for the tests.

    (3) If your camera will work correctly even with Apple applications, use OS X Recovery to completely reinstall your Mac OS since system recovery stored on your startup disk.  Don't bother test Skype or other 3rd party apps until you have your camera works with applications Apple.

    (4) If none of the suggestions above resolve your issue, contact Apple or one of the Apple-Authorized Service Provider to have your Mac professionally repaired. Don't forget to back up your Mac and Deauthorize iTunes before the call for tenders for the service.

    Post edited by: Jim EZ

    Mac OSX 10.11.3

  • Is the ATI X 1300 Pro compatible with Dimension 4300 s

    I have a Dell Dimension 4300 s with an old ATI rage 128 pro agp card. I want to update for the ATI X 1300 Pro, but I'm not sure that it is compatible. Also if this is not what video cards would work?

    Hello

    It is the only card that has been tested and works.

    Fear no other will work.

    The machine is obsolete it is difficult to provide information on the machine.s

    Concerning

  • WHY MY MAC at the BEGINNING of 2009 PRO 2.66 GHz Quad - Core Intel Xeon will NOT IMPROVE in SIERRA

    WHY MY MAC at the BEGINNING of 2009 PRO 2.66 GHz Quad - Core Intel Xeon will NOT IMPROVE in SIERRA

    Your signature says you're running snow leopard 10.6.4. If this is the case you must update to 10.6.8 in order to get the Mac App Store:

    Mac OS X 10.6.8 Combo Update v1.1

    You will need to upgrade to El Capitan until you can upgrade to Sierra:

    https://iTunes.Apple.com/app/OS-x-El-Capitan/id1147835434?MT=12

  • Can I upgrade my macbook at the beginning of 2011 pro wifi 802.11ac?

    Can I upgrade my macbook at the beginning of 2011 pro 802.11ac?  Thank you.

    Perhaps, but it would be most likely to be via an external USB wireless adapter to do. I suggest you check out OWC to see if they have what you are looking for.

  • The MacMini (late2009) is this compatible w/Sierra?

    The MacMini (late2009) is this compatible w/Sierra?

    It is difficult to say with certainty, see > get ready for macOS Sierra - official Apple Support

    If so, you'll probably want at least 4 GB of RAM as the previous OS Xs.

    https://eShop.MacSales.com/shop/Mac-mini/

  • What is the acquisition card OR 1426 compatible with a line/Linear array scanner?

    What is the acquisition card OR 1426 compatible with a line/Linear array scanner?

    I'm currently doing a feasibility study of the project that uses the NI 1426 and a linear Array Scanner acquisition card, and I would like to know if they are compatible with each other.

    Thanks in advance

    Martin

    Hi sandeepchinni,

    I agree with gunnesjr that we need more information about what you mean by Linear Array Scanner.  As he said if it is a scan line or an area then yes it will most likely compatible.  A small correction to what he says.  You need not buy NI Vision if all you need to do is to acquire images.  The framegrabber will be delivered with the software that is needed to work.  If you need to do any image processing then you need NI Vision.  The following knowledge base lists what is installed with the driver for the card.  Live that are installed with OR-IMAQ Vision Acquisition Software?

  • "Failed to create the object print Lexmark X 5400 Series. The printer driver is not compatible with a policy on your computer

    I have Lexmark X 5410 printer with the installation CD. Installed perfectly on computer with Windows Vista 32 bit. Try to install on Vista 64 bit computer but get error message "unable to create the object print Lexmark X 5400 Series. The printer driver is not compatible with a policy on your computer that blocks NT 4.0 drivers (1930). Tried using the compatibility in the computer. Without success. How can I fix?

    Original title:

    32-bit and 64-bit Windows: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

    Excerpt:
    Can I run a 32-bit program on a 64-bit computer?

    Most programs designed for 32-bit version of Windows works on the version 64-bit windows. The notable exceptions are many antivirus programs.

    Device drivers designed for 32-bit versions of Windows do not work on computers running a 64-bit windows. If you try to install a printer or other device that only has 32-bit drivers available, it won't work correctly on a 64-bit version of Windows. If you don't know if there is a 64-bit driver available for your device, go online to theVista Compatibility Center"" href = "http://go.microsoft.com/fwlink/?linkid=142444" > Windows Vista Compatibility Center

    .
    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • The 300 series switches are compatible with detection of PoE before standard in old phones Cisco?

    The 300 series switches are compatible with detection of PoE before standard in old phones Cisco? They don't seem to be (7902G don't turn on when it is connected to a SF302-08MP with firmware version 1.1). What no need special configuration on the switch to enable this detection?

    Please note that the switches of the series 200 and 300 are now supported POE Legacy Cisco from September 2011, to provide power to 7960, 7940 and other phones standard pre and APs. Details on the following link:

    https://supportforums.Cisco.com/docs/doc-18337

  • The microprocessor as fast and compatible with creation software market who?

    Hello. I use Adobe first CC. I did a video processing that can exceed 5 hours. The rendering of my computer time is too long. 4790 3.6 GHz i7 processor has 8 MB Intel on my computer. I want to buy a new CPU on my computer better. The microprocessor as fast and compatible with creation software market who? Make the rate for which you propose to first CC processor.

    Exon processors so unfortunately I do not have a budget.
    Intel Core i7 Extreme Edition 3.0 GHz 20 MB Cache LGA 2011 v3 5960 X
    X 99-DELUXE ASUS / Intel U3.1 X 99-3200 Mhz (OCR) DDR4 Socket 2011-V3
    Kingston HyperX 3000 mhz Savage 8 GB DDR4 RAM x 4 = 32 GB

    Samsung 950 Pro 512GB 2500 to 1500 MB/s m2, SSD PCI-E 3.0 MZ-V5P512BW

    Archive of Seagate 8TB 3.5 "5900 RPM Sata 3.0 drive Sabit ST8000AS0002

    You can meet them in the budget. Is this system enough? Exon a passage or I?

    It is a system which may constitute the budget better than this system

    Thank you very much for your help

  • Cannot use 'lab1' host because the host CPU is not compatible with the judgment of the virtual machine suspend state.

    I see that this error was mailed here, but can't seem to find a position with a resolution.

    We use Lab Manager 4.0.4 and just upgraded the hosts in our laboratory.  Before updating to ESXi 4.1 ESX 4.0 u1, we cancelled all VMs in all configurations.  There is none who were suspended, they were all turned off.  We have improved vcenter 4.0 to 4.1 as well.  We moved from a dell poweredge 1950 with two quad core intel L5410 to a r610 with two quad core intel processor E5506.

    When I try to turn on some of the lab configurations (our VM models all work fine), I get this error:

    • Cannot use 'lab1' host because the host CPU is not compatible with the judgment of the virtual machine suspend state.

    I threw the State for the lab configuration (even if it was turned off and cancelled) and still get this message.  I guess the processor architecture of these chips is quite similar, and both are Intel.

    If I go into this directory of Manager of laboratory inside the data store for one of these virtual machines that does not light and add to the inventory, he turned and starts fine on my server esxi 4.1.  So how do Lab Manager to get account it's well deploy and start it?

    Hey billk.

    Although not supported completely, you can solve it by going to the SQL of Lab Manager database.  Make sure that you back up your database before you do anything like that.

    Open the table "fsdir" and corresponds to the dir_id with the id Lab Manager VM.  Once you find the relevant line, change suspend_proctype_id to null (Zero-Ctrl).  You can do this while Lab Manager is still running.

    The results can be unstable (i.e. Windows can crash if it was a drastic change of CPU), but at least you look at a hard reset.  The bat reset certainly not being able to return to the previous state.

    Also note that while Lab Manager does not include CVS, if you activated, your virtual machines still work in CVS mode.  If you have a mixture of heterogenious of hosts in a cluster for Lab Manager, you can see this question pop up a lot.  There is absolutely nothing wrong with take back the virtual machine because of the VCA, but Lab Manager thinks otherwise and prevents it.

  • Most recent version of the Oracle client version is compatible with the low version

    Most recent version of the Oracle client version is compatible with the Oracle DB low version

    Client Oracle 10.2.0.5 version should be compatible with 10.2.0.4 DB?

    Yes - see on Oracle (ID 207303.1) support compatibility table

  • The installation of Acrobat Pro XI with Win10 fails (suspended installation)

    I try to install Actobat Pro XI on my Win10 machine, and installation has failed repeatedly.  Sometimes at the beginning of the installation process.  Ask my license key and e-mail (which has not yet been used at all) and by submitting, raises an error of installation was interrupted.

    Help!

    !

    Hello

    Please see the thread:Acrobat XI Pro installation interrupted

    Let us know if this helps!

  • The information about the registered printer are not compatible with this version of Photoshop

    Hello

    I hope someone can help us. I'm a COMPUTER technician in a school, we have about 500 machines to Windows 7 64 bit with around 600/700 users - 200 machines have the CS5.5 Master Collection on which is installed. We have an intermittent problem with printing from Photoshop (32-bit and 64-bit versions). Our printers are for the most part, the (modern) HP LaserJet printers, but we have an inkjet Epson B-510DN and some copiers Xerox too. The drivers are all installed on a central print server running Server 2008 R2 and shared via the client computers group policy.

    In the rooms where Photoshop is installed, intermittently when a student goes to print, we will receive the following error message:

    Saved printer information are not compatible with this version of Photoshop, or the saved printer is no longer available. You will need to check your printer settings before you print.

    Photoshop will be gray and then the button "Print" and will not let the user print again. The strange thing is that we can still print from other software such as Microsoft Word or Microsoft software or even non - same Illustrator will print. It just seems to be Photoshop it's has all the problems.

    This occurs when you print to a printer on the site, 90% of whom are HP. As a general rule we set up all of our HP printers with HP PCL6 universal print driver because it facilitates the management of the various models of printers, and we did not limit ourselves atall yet. We are aware that the Adobe software is "preferential" for Postscript drivers, but aren't our printers, HP PCL is their mother tongue. We tried to change a printer for the Postscript UPD driver to test but he brought no improvement. We also saw the issue in depth altogether with our Epson B-510DN, which is configured with the newer model specific driver Epson as uses our photography service. As we see with different printers, I don't think the printer drivers are to blame - unless someone want to prove me wrong.

    Like I said the problem is intermittent, and we are having trouble tracing it down for a user, computer, or a software problem, as it is so intermittent. Has anyone another considering cela and managed to overcome? Given that it only happens in Photoshop is this a bug that Adobe have recognosed and fixed the CS6? The only solution we found that he must go in printer, change the default printer from one to the other and vice versa - cela seems to shut up Photoshop.

    Thank you, Dave.

    Here's the answer that I received from Adobe, and it worked.

    'Ok. Try to open 'print', while holding the space bar; He ignores all the saved values. "Also, make sure that the correct printer that he set as default.

  • The new Apple Watch comes compatible with my iPhone 5 s 16/09/2016?

    Hello world

    I am interesting in buying the new Apple Watch, and I don't know if the watch is compatible with my iPhone 5 s.

    I already pre-order my iPhone 7 more, but it won't do anytime soon, and I'm sure that the watch is compatible with the new more than 7. I wonder all the old iPhone 5s. My iPhone 5s does not use IOS 9, but 10 of IOS.

    Thank you

    Hello

    Yes - the new Apple Watch models are compatible with your iPhone 5s.

    As for the first generation watch, the new models require iPhone 5 or later.

Maybe you are looking for