Is a part of the tree of his own brothers and sisters?
I have a routine that takes an item in the tree selected by a user and loop through all brothers and sisters of the element:
itemRelated = TRUE;treeItemToTest = 0; while ((itemRelated) && (treeItemToTest < totalTreeItems) && (treeItemToTest >= 0)) { /* Check if file is related to the selected file */ AreTreeItemsRelated(panelHandle, treeHandle, treeItemToTest, VAL_SIBLING, selectedTreeIndex, &itemRelated); if (itemRelated) { /* process the item */ /* ... */ ++treeItemToTest; } }
Somewhere between the current version and CVI 2012, our program has stopped working properly. I traced the problem to the call of AreTreeItemsRelated in this routine. In the latest version of LabWindows, this call returns FALSE if treeItemToTest and selectedTreeIndex are from the same point. This is apparently a change in behavior of CVI, 2012, but it is not documented in the help of the function. This change was deliberate?
Yes. You are right. You have run into a scenario that can be very difficult to work around. We try very hard to never break compatibility with older versions of the execution, but sometimes it's inevitable, as in cases like this where a bug is fixed in a new version. Problems occur when there are existing programs which are assuming the existence of this bug and would actually break if it were not for the bug.
The best way to avoid this situation is to use a specific flavour to the version of the runtime of the CVI. It has its drawbacks, of course (for example not automatically benefit from bug fixes in the run-time), but he could sure complicated deployment.
Of course, who isn't really help you now, since your 'program #1' is already deployed using shared execution. Having said that, the best you can do is to replace it, what you can do without uninstalling all of its dependencies, by following these steps.
Luis
Tags: NI Software
Similar Questions
-
How to highlight the part of the tree?
Hello everyone!
I have a question: how to highlight a part of the tree on a condition? (please see the attached vi and the pictures for a clearer explanation of the problem)
I'm using LabView 2014.
Thank you very much!
Have patience. You only aske the question about 40 minutes earlier.
You highlight the lines you want by writing the values to the control. Don't mess with the background color of cell.
You try to highlight several items? If so, then right-click on the control and let him choose 0 or more elements. As soon as you select a mode with the possibility of more than one element, the values of the tree becomes an array of strings, rather than just a string. You need build an array of strings that you will write to a local variable of the control to highlight the various elements.
-
How to blur a part of the tree?
I have a tree control with check marks and the option "text click on toggle mark.
When I have a list of items that I have to disable (i.e. do grey) some of them, but I can't find the ATTR_DIMMED attribute for the SetTreeItemAttribute() function.
I used SetTreeCellAttribute() but this way the checkmarks remains active, so I can activate / it also for disabled items.
How can I turn it off completely (i.e. Sun) a part of the tree? With its check mark too?
This should do the trick.
int CVICALLBACK TreeCB (int panel, int control, int event, void *callbackData, int eventData1, int eventData2) { int itemIdx, dimmed, swallow=0; switch (event) { case EVENT_MARK_STATE_CHANGE: itemIdx = eventData2; GetTreeCellAttribute(panel, control, itemIdx, 0, ATTR_CELL_DIMMED, &dimmed); if (dimmed) swallow = 1; break; } return swallow; }
-
My husband doesn't like the itunes account is under my name. I have a way that he can have his own name and sign on with her and still exist on the family account? Also, have we HAVE two-step verification? It's a real pain.
Yes it can have its own ID and share your content via the family sharing, he needs to sign out of your ID and to create his own, then one of you needs to invite another family sharing.
You don't need to use 2 verification step, if you want you can disable to my Apple ID
-
Prevent the load of his own muse js libraries
Is it possible to prevent the loading of his own muse js libraries?
If you mean while mounting / work on the layout page, then no.. Of course, you can remove all references later after the publication of the code, but then what would be the point of work even in Muse? 70% of its functions depend on the JS and when stripping away pages simply break.
Mylenium
-
Lightroom 5 does not open it gives me an error message there is an error during the reading of his preview cache and must completely
He said also he will try to fix it the next time it opens, it does nothingCheck this thread. Your previews Cache files are corrupt.
-
How to install brothers and sisters from the master cod
Hello
I am facing a problem,
At first I added the .cod as a resource file in my application, then I read that .cod in byte []. When I try to creteNewModule using CodeModuleManager it gives me the value NULL because of too large this .cod file size (I also tried with the example helloworld cod file and it works correctly).
Now, I used the brothers and sisters of .cod files and try to save, so it works correctly and it gives me my application on the emulator, but while I'm trying to run my application it gives me error - Module 'myApp' has verification errors. Error at startup 'myApp': Module "myApp" contains errors of verification for the emulator of 4.5.Any help is appreciated.
Thank you
KoneYou're looking at the same problem as this user:
-
I would buy Photo shop and have it show that I can assign to a member of the team with their own username and password. I bought it once before, and it would allow only the administrator user name and password to access. would it be controlled by the cloud team account so that I can assign to a user and have all my products Adobe controlled by a single account. Photo shop will be for a single user.
Thank you
Doug
Team license links that can help
- https://creative.adobe.com/plans?plan=team team plans
-http://www.adobe.com/creativecloud/buy/business.html
-https://helpx.adobe.com/contact/creative-cloud-teams.html using the team
-manage your account http://forums.adobe.com/thread/1460939?tstart=0 team
-Team Installer http://forums.adobe.com/thread/1363686?tstart=0
-
I use a use of a region of the tree Mobile Application. The tree implementation is defined on Tree APEX.
When I run the Application, I get a symbol of continuous loading.
When I use the same SQL, region and implementation in a desktop app it works fine.
I can't get it working on a Mobile Application with the implementation of jsTree.
bug?
Hi Matt,
The area of the tree is not supported for mobile pages. If you use the new page Wizard to create a mobile page, you will see that it is not established that the area of the tree. It only appears if you decide to display unsupported. What seems like a bug, it's that the tree is displayed in the Gallery of areas of the page designer.
The implementation of the tree of the APEX (widget.treeView.js) is a jQuery UI widget. Even if the core of widget in jQuery UI and jQuery mobile are essentially the same tree view widget has additional dependencies such as $. UI.mouse. the reason why the old jsTree can work at least a little, is that it is a jQuery plugin not a jQuery UI plugin (if I remember correctly).
I also think that on a small phone size screen that a tree would not work so well.
Kind regards
-John
-
Part of the tree with trigger WHEN MOUSE DOUBLECLICK does not work
Hello
I have the element of the tree to the form with dynamic data, these data extend to these point and maybe see the rim under this field, if the tree node show in the tree after scrolling element these point relaxation WHEN MOUSE DOUBLECLICK does not work.
Any suggestion?
Thank youI would use the WHEN-TREE-NODE-SET-trigger
-
I have a problem with the cursor jumps his own.
Original title: why my cursor move his own and spoil me when I type? Please tell me how to stop it.
Whenever I type my cursor jumps in the middle of what I type and I mess up. He won't let me type fast. Even, I went into the settings and tried to hide the cursor, but it did not work.
Help, pleaseJensen Hi I have an acer aspire 5532. I had this happen before, but tonight, I received a response to download Touch freeze Google.com it seems to work so far. Either by the way, is not the first time that this has happened. It happens on every computer (laptop) I get and I havve had a Toshiba, a compaq laptop and an Acer.
Thank you. If have any other suggestions, I'll be happy to listen.
Barb
-
RH8 can be installed by the admin using his own account?
Excuse this basic yes/no question, I couldn't find info on RH8. In versions, it was once recommended to install RoboHelp using the account of the USER who would later use the program (not the admin). To do this, the admin rights should be attributed to the user during installation, and again subsequently removed.
This procedure is still required for RH8 or RoboHelp can now be installed by admin using his own account?
The options are the user account with admin rights attached or the account admin who will have these rights by default.
See www.grainge.org for creating tips and RoboHelp
-
to find brothers and sisters to other tree trunk
Hello
I have a Table with objects [T (identification number, the field number)].
I have another table that links these objects in a structure tree [L (up_id number, down_id number)]. ~ (I need the child of beeing objects in more than one parent) ~.
Get the ID of a certain object (not the root, but it guaranteed not to have only one path to the root).
I have to find all the objects in the entire tree with the same value in the name attribute.
Usully I would go for connect prior down_id = up_id start with up_id is null but in my case there is no entry in L have up_id NULL. : () o
How can I select all nodes in a tree?
Is this possible with a single statement?
Good bye
DPTHello
T.PD wrote:
... I was wondering if the name that (...), select help here...Subqueries certainly help. They do not have to be in a WITH clause. views online would work in this case.
I have to respect the tree structure, because the table contains several separate trees...
In a tree, each node has only one parent (if any). In my_tree_links, id = 26 has two parents (10 and 20), so this isn't a tree. You not helping yourself or someone else if you say it is.
INSERT INTO my_objects SELECT LEVEL , mod (LEVEL,7) FROM DUAL CONNECT BY LEVEL < 27; /
When end you a statement with a semicolon followed immediately by a slash, then the statement is executed twice. I suppose that this isn't what you wanted. If my_objects.id is not unique, the solution below will have some minor changes.
To limit the results to the nodes that have an ancestor with the target node, you can do a Query of Yo-Yo , where you do a query of bottom-up first, to find all the ancestors without parents of the target node, then do a query from top to bottom, to find all their descendants, like this:
VARIABLE target_id NUMBER EXEC :target_id := 26; WITH got_roots AS ( SELECT id_up FROM my_tree_links WHERE CONNECT_BY_ISLEAF = 1 START WITH id_down = :target_id CONNECT BY id_down = PRIOR id_up ) , got_descendants AS ( SELECT id_down FROM my_tree_links START WITH id_up IN ( SELECT id_up FROM got_roots ) CONNECT BY id_up = PRIOR id_down ) SELECT DISTINCT mo.* FROM my_objects mo JOIN got_descendants gd ON mo.id = gd.id_down WHERE mo.value = ( SELECT value FROM my_objects WHERE id = :target_id ) AND mo.id != :target_id -- If wanted ;
Output (where: target_id = 26):
` ID VALUE ---------- ---------- 12 5 19 5 5 5
Always tell what version of Oracle you are using. The query above works in Oracle 10 (and), but could be adapted to run on Oracle 9.
Whevever you need to do a CONNECT BY query as a join, it is faster if you can CONNECT BY first, in a separate subquery and join the results for the other tables. This is what the second auxiliary request, got_descendants, is for.
What results would you if: target_id = 8?
The query above, as written, would not include id = 1. If you want, you will need to somehow enter the root ID for example 1, which are never id_down, in the same column with all the id_downs. You can do it with a UNION in the query, but you can change permanently my_tree_links so that these roots have some parent (themselves or some dummy, like NULL). -
Do you guys do anything better? WHY have I not talking to you twice about my problem? I HAVE A DELL V305 PRINTER. IN THE CONTROL PANEL, IT SAYS THAT I HAVE A PRINTER. IN THE "ALL PROGRAMS", HE SAID THAT HE DIDN'T THERE HAS NO PRINTER. WHY?
Hello James,.
It seems that you see the contradictory information on the question of whether or not the printer is installed.
A few questions:
- What operating system is installed?
- Have you tried to install the driver for this printer?
We will make an attempt the following:
1. remove the printer from the PC.2 uninstall the printer from the PC driver.3 reinstall the printer driver.4 reinstall the printer.Best regardsMatthew_Ha -
These problems occur only when you use Mozilla Firefox. I am using a Lenovo Thinkpad:
1 site Web seem to flicker on the images, videos, maps, when the mouse moves around the screen.
2 pointing the mouse over a link in the browser and a left click activating the link above (if it exists)Do not experience problems with google or ie. It started a few days ago.
Thoughts?
Hello paulo.eichelberger, try Disabling graphics hardware acceleration.
You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).
Then perform the following steps:
- Open the Firefox Options window as follows:
- Click the menu button
then select Options.
- Click the menu button
- In the Options of Firefox window, click the Advanced tab, and then select general.
- You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
- Now restart Firefox and see if the problems persist.
In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:
This solve your problems? Please report to us!
Thank you.
- Open the Firefox Options window as follows:
Maybe you are looking for
-
Lost the link to the last worlds titles. How to restore?
Trying to read another title, when the link entire disappeared. How to restore?
-
I have a desktop computer of p6267c 5 years or more running Windows 7 Home Premium - 64-bit. He was a great computer with no problems other than a graphics card failed out of the box when it was delivered first, but that was immediately replaced und
-
student in multisim edition installation problem
I first installed the version of multisim student and uninstalled it.now I am unable to re install the program.i tried to solve the problem by removing the directory program files.please help me solve the problem
-
HP PSC 1315 all-in-One use scanner without ink cartridges
Hello Is it possible to use HP PSC 1315 scanner without ink cartridges? A light ink control is brinking and it won't scan.
-
Windows defragment stalls and dropouts
In this case as a tool of windows and a Norton task 'optimize '. Until then the task of Norton said the C; Disc didn't need optimization. I tried chkdsk to administrator level, but who has not remedied the prob. I did a deep search of viruses (viri