Is a PCI-6120 card in a computer with linux useful for the analog output?

Similar Questions

• Crash of the computer that was used for the software Adobe Acrobat XI.

  Hello. We had a crash of our computer which includes the software Adobe Acrobat XI.

  When you try to install this software on the new computer we get this error: "serial number 1 *... * 1 is already in use by the maximum number of computers." You need it to disable another computer to breast 30 to use this product. »

  But we cannot turn off the old installation where the failure of computer.

  How to reactivate our license?

  Concerning

  Thomas Carstensen

  Teracom Danmark a/s

  Hi Thomas,

  Is support page for Acrobat - Acrobat DC Learn & Support

  In this page, go to contact us in the Support section, where you'll be able to chat with the person of service desk. He or she will be able to help you further.

  Thank you

  Karan

• Which card to use for the backup of Win8

  Windows 8 requires a minimum of 32 GB card to use for the backup. I bought a PNY 32 GB (http://www3.pny.com/32GB-Pro-Elite-Series-Hi-Speed-SDHC-Class-10-UHS-1---35MBs-233X-P3122C442.aspx ), but it wouldn't work. Even though it says 32 GB it is actually a little less. If I buy a 32 GB SanDisk will, that I meet the same problem? Exactly what the size is a SanDisk 32 GB card? (http://www.sandisk.com/products/memory-cards/sd/standard-class4/?capacity=32GB)

  Thank you

  Ed P2

  any card 32 GB will be less than 32GB after it is formatted to be used in a computer. It is a standard for all types of storage.

  If you need 32 GB of actual useful storage space, you will have to get a 64 GB card.

• Problem of generation of the analog output on PCI-7342

  I use for the control of servo motor with encoder Axis 1 of my PCI-7342 feedback

  and trying to out of the velocity of the encoder on the analog output of the axis-2 which is currently not used.

  For testing purposes, I pulled out a constant 16383 (half of 32767) to the analog output

  through load DAC.flx permanently, but there is no voltage on the map of the motion.

  I read

  http://digital.NI.com/public.nsf/WebSearch/102BE3EEED8A8B0DC1256EDA0059EC47?OpenDocument

  http://forums.NI.com/T5/motion-control-and-motor-drives/analog-output-voltage-from-UMI-7764/m-p/5219...

  http://forums.NI.com/T5/motion-control-and-motor-drives/configuring-the-analog-output-of-PCI-7358-mo...

  and configure my 2 axis to be a stepper motor. I also tried to disable axis - 2. None of them works for me.

  Also, I tried to read the value of CAD using reading DAC.flx right after that load DAC.flx is called.

  Correctly, the value was shown on the screen. (See the attached figure)

  I'm really bad now. Please, please, please help!

  Any possible solution is fully appreciated!

  Ron Liou

  
  

• My computer takes much longer for the initial start as before?

  Original title: startup

  my computer takes much longer for the initial start as before?

  I suggest to do the following:

  (1) Windows Update and install all updates

  (2) run disk clean up and defragnment

  Check disk run 3)

  Check 4) Add/Remove programs and uninstall programs you want

  (5) run full system scan, with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  You can also take a look at:

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• I bought a computer that has been renovated and the owner said that he has updated the computer with Windows 7, but the computer is now ask for an activation code.

  I need help to activate my computer but I don't have the code. I bought a computer that has been renovated and the owner said that he has updated the computer with Windows 7, but the computer is now ask for an activation code. I tried to contact the guy but he won't answer. Is it possible to check the activation without the code? I need help and do not want to pay a hundred dollars more.

  Is there a COA sticker that is attached to the machine?

  If so, check to see what edition and version of Windows machine is licensed to:

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  Also:

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• I have a mac with el capitan on it.  This computer is not going to used for the design, but I need Acrobat 9 put on.  I have Acrobat 9 on a CD, I slipped the file in my application folder and double click on the Acrobat pro icon, nothing happe

  I have a mac with el capitan on it.  This computer is not going to used for the design, but I need Acrobat 9 put on.  I have Acrobat 9 on a CD, I did drag the file in my folder of the application and double-click the Acrobat pro icon, nothing happens, I'm stuck.

  You must install, copy... and 9 version does not work with El Capitan

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• How can I get the download instructions if you buy a new computer and edit programs for the new device

  How can I get the download instructions if you buy a new computer and edit programs for the new device

  Download the CS6 products

  Mylenium

• NVIDIA graphics card closes. Computer and high use of CPU error closes

  I can understand the instructions, but I don't know how to solve these problems.  My first question is NVIDIA Graphics quits working.  I arrived at the place where I can repair it and he just tells your computer couldn't download the solution.

  My second question is High CPU use of them and warning that closed just from my computer.  Is that what I can do to help the problem?

  To a high utilization of the processor first open Vistas ' performance and reliability monitor "and see which consumes the most resources.

  Y at - it no particular message that you see about NVidia? It happens when the execution or enforcement of any application specific/s?  Some old material (graphics cards) will not face the games and images high rates etc and can overheat.

  If it's a specific NVidia problem then I would contact the manufacturer of PCs and NVidia for the drivers updated and advice.

• Satellite M40-129: PCMCIA card does not work with Linux

  I have D-Link DWL-G650 with Atheros Chipset that is supported under linux (madwifi). But if I boot Linux map is not found. I tested the card with a Fujitsu Siemens laptop and it worked out of the box!

  No idea why it doesn't work with my M40-129?

  Hello

  As you know Toshiba doesn't support Linux and there is no Toshiba drivers for the Linux operating system, but I was able to find this page useful Toshiba on laptop with Linux configuration:
  http://newsletter.toshiba-tro.de/main/

  You must check the machine OS compatibility and other areas.
  I m you will find many useful tips.

  Good luck

• Portege R500 with 3G - Instructions for the insertion of the SIM card

  I have a model PPR50E R500 which I think has built in 3G. Howevere I can't find documentation on how to insert a SIM card. One of the other model seems to suggest that the SIM card is inserted behind the keyboard. Can someone point me to some training documents please?

  Unfortunately there is no documentation available. (Maybe in the user manual, but if there is nothing, then you won´t find anything)

  Here are some instructions on how to swap the SIM card on a Portégé R400, so I think that since both machines are quite similar, that the guidelines would apply to the R500 too:

  Perform the following steps to insert/remove the SIM card:

  1. close the machine OFF completely. Make sure that the POWER LED is not lit.
  2. remove the AC adapter, battery and all connected cables/devices.
  3. open the screen.
  4. remove the keyboard cover with a small screwdriver flat blade in the small hole on the edge of the cover and pulling gently out.
  5. remove the two screws that hold the keyboard and knock it gently over the keyboard. (Use a small cross-slot screwdriver to unscrew the two screws).
  6. to activate the keyboard down, take the upper end of the keyboard, pull gently upwards and place the keyboard with the keys down on the palmrest of your machine.

  * ATTENTION: *.

  {color: #ff0000} + do not touch the keys on the keyboard to return back. Make sure that you hold the keyboard on both sides and ask gently down on the palmrest. +
  + The keyboard is connected to the machine with a flat cable. Avoid pulling the cable on the connector or damage! +
  + Avoid dropping objects (such as paper clips, etc.) inside the machine. A metallic object can cause a short circuit on the motherboard, which would cause serious damage to your machine. +
  {color}

  7. search the card slot SIM on the upper right corner of the machine.
  8. slide the locking mechanism of the SIM card with the fingernails or a small object slot to the left to unlock. (You can also use a small flat blade screwdriver)
  9 pull gently until on the SIM card slot.
  (10 a) Insertion: insert the card into the SIM card slot. The filings of the SIM card must show an upside.
  (b) removal: remove the SIM card from the slot

  11 turn the slot down and block it by sliding the lock to the right.
  12 insert the keyboard by placing the clips on the bottom of the keyboard into the grooves on the top of the palm rest. Rabat the keyboard gently downwards and fix it by screwing the screws into the holes. Make sure that no screws were dropped on the inside of the machine!
  13 install the support of keyboard on its position and push down to fix its position.
  14 attach the adapter sector, battery and all cables/devices.
  15 enable you wireless device by pressing "FN + F8" when you work on Windows.

  * I must warn you, it s on your own risk and if you do not feel comfortable with the installation procedure can put the machine to an authorized Service provider, which can make the installation of the SIM card for you.*

  Good luck my friend :)

• Configuration of the analog output of the controller PCI-7358

  Hello world

  I work with the PCI-7358 during a period of time and now I need to configure the output of the controller for a specific purpose. All I have to do is turn on and turn off the output to an analog 5V DC voltage level. I use a UMI-7774 as a breakthrough. I plugged the IO of 5-8 to the UMI axis MOVEMENT and I hope to get the tension off-axis 1 of the UMI CONTROL block. I use DAC.vi to load to turn on and off this PIN on UMI. When I tried the voltage level was 1.5VDC and it fluctuates so I tried to read the voltage on the PIN and she was 3.2Vac. It was said in this DAC.vi of charge help offset values or front torque limits does not affect the level of tension. I can't understand what is to limit the output voltage level. (I tried the 32000 and-32000 for entry this .vi)

  If anyone can help urgently, I will be grateful...

  Gencer Genç

  Hi Roman,

  in MAX, you must configure the axis as the stepper motors. You don't have to worry about the type of comment. You can leave this set to "encode". You can configure the engines loop Mode step by step in the tab settings of the Stepper to open loop. But in fact your needs, no matter, if you configure open-loop or closed-loop axis. Any mode stepper will be unmap the CAD of the axis.

  In LabVIEW, just use ' configure axis resources "and map of the main output of your axis of stepper output or 'None '. This will also unmap the CAD of the axis. The secondary output must also be mapped to 'None '.

  I hope this helps,

  Jochen

• Which DLL to use for the use of NOR-PCI-6703? (nicaiu.dll or nidaq32.dll)

  Hello! I'm programming ATEasy (from Geotest Inc.). I have to incorporate a Council OR-PCI-6703 and I need the driver for it. I do not know what .dll file to use: nicaiu.dll or nidaq32.dll. What is the difference between these 2 files? What is the best for me to use? Please help me!

  It depends on if you use the traditional DAQ driver or the driver DAQmx. If you use the DAQmx driver you want to use the nicaiu.dll. This link will explain the necessary information to be able to use for your application.

  David has.

• I have a PCI-6221 NIC connected to a block of connection TBX-68. How can I see the wiring for the analog channels with MAX?

  Hi all

  I have a PCI-6221 NIC connected to a block of connection TBX-68. Once I found a drawing that shows me all the connections on my block of connection for each analog input tasks. I don't see this option now. Can someone describe to me how I can find this new?

  
  

• A product key from an old computer can be used for vmware fusion on a new mac?

  We used to own a Dell computer with windows XP Professional OS. Lately, we have switched all of our Mac computers and no longer use the old windows computer. I have the product key for this OS and I was hoping to use the CD of windows XP on VMware fusion and relocation (in order to play video games). So far, the installation was almost a success until it would not accept the old operating system product key. Is there a way to get a new product key?
  PS The only purpose is for the PC games we have.

  can I get another free product key? I still have the old computer

  you need to know if the old pc had an O E M version of windows, because

  windows OEM versions are locked to the motherboard of the PC they where first installed at.

  If the product key you have is from a version marketed Windows (non oem) you can install the version on another pc if you take away the first pc.

  in other words, a version on a pc at the same time.

  You should check with the microsoft Web site dealing with pirated software and product keys.