Is always offline? HP Officejet J4500 Wireless?

Similar Questions

• HP Officejet 4500 Wireless all-in-One Printer G510n is always offline

  When I try to print, the Officejet 4500 G510n Wireless is always offline and will not print.

  I clear the buffer of characters and reset the printer by turning it off and back on.

  Then I right click on the printer icon and select printer to use online.

  After that, the printer works normally.

  My question is, why he continue offline?

  I do this procedure whenever I want to print.

  I am running Windows Vista 64-bit and the printer is connected wireless.

  I checked HP updated software downloads.

  The available software is dated January 2010.

  I already use this version.

  Any suggestions will be greatly appreciated.

  Hello

  Please use the following advice/instructions to correct:

  http://support.HP.com/us-en/document/c02221706

  Kind regards.

• HP Officejet 4500 Wireless printer says it is offline

  Original title: HP Officejet 4500 Wireless printer

  My printer is offline and I cannot print. How can I get this back online?

  Hi David,

  I suggest to consult the link below and follow the instructions for Windows 8.

  "Printer is off-line" Message appears on the computer and the HP printer does not print

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02221706&cc=us&DLC=en&LC=en#N7283

  Hope that the information has been useful, if you have any other questions, feel free to post. We will be happy to help you.

• Cannot print to HP Officejet 4500 wireless

  I have a HP Officejet 4500 wireless printer I have ever managed to get print wireless. It connects to my wireless very well, but when I install the device driver and go through the steps of setting up on my computer it always stops with this message:
  Your computer is unable to communicate with your printer to 192.168.0.21. This can be the result of firewall software. If you use firewall software, make sure that the 427 UDP port is unlocked for the incoming and outgoing traffic.
  Your PC cannot communicate with your printer at the address of 192.168.0.21. Check all cable connections. Make sure the printer and the PC and the router are powered on and connected to the network.

  My PC is a HP ENVY Phoenix h9-1360ea with windows 8.1 desktop computer (he has never worked with either 8.0). I have it connected to my network wirelessy and via ethernet. Neither work.

  So far I have tried:
  Uninstalling and reinstalling the HP Software Download Center. The file I downloaded is OJ_AIO_4500_G510n-z_Full_Win_WW_140_408. I installed this as administrator
  Disable my smart firewall from Norton Internet Security. I also added the printer to the network card.
  Adding a rule to my Netgear DG834GT router firewall to allow inbound and outbound on port 427 UDP traffic.
  Try all the suggestions of troubleshooting on www.hp.com/global/us/en/wireless/index.html?jumpid=ex_r11400_go_wirelessprinting

  I checked online on various forums, but so far everything has led to a deadlock.

  Now run out of ideas and could use some help please.

  SE based on what comes to express, the material can work. However, the software / firmware does not work correctly.

  Mario

• Pinter is always offline

  Hi, my printer is connected to a linksys n wireless router. It works perfectly until a few days when the power went out. I had to reset the router pppoe setting in order to get internet, but she is always offline. can not find a way to solve the problem. Anyone know what could be the problem?

  Right-click on your printer and select the option use printer online...

  Make sure that your printer is assigned an IP address that is in the same Segment as that of your router...

  If the IP address of your router is 192.168.1.1, your printer must be assigned an IP 192.168.1.10 and 192.168.1.11 and so on...

  To check the IP address of the printer you need to goto is TCP/IP settings...

• HP Officejet 4500 wireless printer does not appear on the control panel

  My HP Officejet 4500 wireless printer does not appear on the control panel.  How to fix it.  I have a laptop Toshiba and Windows 7 Home Premium OS.  Help, please.    rwillm

  Hey,.

  Thanks for the update, rwillm.  It seems that the installation of the printer can be a little messed up.  If the printer software is always installed, but simply lacks the printer, then I would advise to do a little cleaning before choosing to add the printer back.

  • Make sure that the printer is deleted from the file devices and printers
  • Click on one of the remaining printers folder
  • Select the properties of the print server at the top of the window
  • Click the tab drivers
  • Remove all drivers in this window for the Officejet 4500

  Also check in the Device Manager to verify that there is no mention of remaining of the 4500.

  • Click on the start menu
  • Right click on computer
  • Select manage in the list
  • Click Device Manager in the list of questions on the left side of the window that opens
  • Click the view at the top of the menu, and then select Show hidden devices
  • Remove all references to the 4500 in the list of devices

  After making sure of the device is gone, I recommend bike devices in the power circuit: router, computer and printer.

  * Make sure the printer has a valid IP address after switching back on and is connected to the same network as your PC before adding the printer.

  If the IP address and SSID are good for the printer, then try to add the printer with the printer software, you have installed.

  • Click on the Start Menu
  • Click on all programs
  • Open the HP folder
  • Open the folder for the series of the Officejet 4500 G510
  • Select Add a device option

  Let me know how it goes,

  Jason

• HP OfficeJet 6500 Wireless - bug Scanner driver - only on Windows 7 platform!

  Date:
  October 29, 2010, Roende, Denmark.

  TO:
  Hewlett-Packard
  Support / Department printer driver.

  From:
  Jesper Simonsen
  Denmark.

  Hello Hewlett-Packard

  I have an error message you bringing on the
  HP OfficeJet 6500 Wireless
  Driver for Windows 7 printer platform.

  This bug only exists on the Windows 7 platform
  and not on Windows XP.

  I was hired to install the
  HP OfficeJet 6500 Wireless yesterday.
  I have installation, installed, set up the printer.
  I configured the printer to run
  Wireless network with gateway router
  SSID and WPA key and it went smoothly.
  I installed the printer for
  address fixed LAN IP 192.168.1.197
  and I configured the gateway routers
  DHCP pool to go until 192.168.1.195
  for not to disclose the IP address of the printer.

  On a new laptop Lenovo running Windows XP
  running on the same wireless network that I installed
  software of the printer from Windows XP/Vista driver disk provided.
  It worked fine with functions of printer and scanner.
  I could also press the Scan button the
  the printer front panel and choose the laptop
  and then the printer starts and automatically starts the scanner
  software upward on the laptop. Thus, it works beautifully.

  So I should install the printer on your desktop.
  A new Lenovo desktop computer running Windows 7 32 bit.
  This desktop computer also works on the same wireless network.
  I installed the driver from the disk Windows 7driver to the address provided.
  Installation may well see the printer on the wireless network.
  I might send a print job to the printer.
  But it does not scan.

  I have tried both:

  -To start a computer scan job.

  The scanner respond briefly to run the scanner carriage
  down on where it should begin to start to
  to scan, then it stopped all communication.
  He sits for a while and then finally there will be an error message
  No communication to the scanner, which had the error code:

  4, [(2,7,80040007), (3,7,0)]

  -J' also tried to press the "Scan" button
  on the front panel on the printer and then go through
  options that are displayed on the screen on the front printers.

  It said on the screen before she had no scan options.
  On the computer, it showed a message
  We should update the list of LCD on the screen of the printer.

  I did it with the help of the HP solution center text.
  I found where I could update the scan job type options.
  I could add/remove them. Then, I sent to the printer.
  Analytical work was then on the display of fine printers.
  The same error: Scanner carriage moves down to the other end
  the scanner then stops all communications from there.

  I tried to google the number of problem and error.
  I found several other users with the same problem we had.
  I could see a webpage that people could download
  the latest printer driver, then it should resolve itself.

  The provided disks were
  -Disk with drivers for Windows XP and Vista
  -Disk with drivers for Windows 7 (32 and 64 bit)

  The drive for Windows 7 has been driver version 13.0.0
  and I could download the driver 140.0 version (English)
  (I guess that's v.14.0)

  So I downloaded this driver package.
  (I downloaded it 28 October 2010)

  First of all, I uninstalled all THE HP drivers and software on Windows 7
  and then did a reboot of Windows 7.

  Then I started to install the new version 14 of the pilot.
  The installation went without problems.
  But this driver has the same BUG than the previous driver.

  I went to the new driver HP Web site
  and downloaded all the updates that were available and
  installed to them all and still no luck with the problem of scanning.

  I had Windows Firewall turned off completely all the time.
  It is therefore not the firewall blocking anything.
  The connection to the printer is good because print jobs worked well all the time.

  Then I would try to connect the printer with USB cable
  the computer fixed Lenovo, to see if there was a difference.
  I have re-set up the printer so that I got the printer available
  by USB connection.
  It prints very well and can scan fine if
  I put the computer starting a scan job.

  But if I pressed the "Scan" button on the front panel
  then came the SAME error as before.
  When in the list of type of scan on the front panel of the printer
  has been chosen and then began the cariage scanners
  towards the other end of the scanner.
  Then he started by the scanner to the computer software
  Then, when we pressed either the scanning/Scan now on the front panel
  on the printer OR we pressed the scan button to start the scanner software
  on the computer. Then the scanner stopped after awhile and communication
  then the error message appears again.

  The wireless network is running a
  D - Link router with wireless access point.
  SSID: alsikkevej10 (not hidden, no special characters)
  Encryption: WPA - PSK (WPA1-PSK/TKIP)
  Shared key: xxxxxxxx (with no special characters)

  CONCLUSION:
  This means that the error (bug) persists in HP
  Driver software the feature scanner for Windows 7 platform.

  When I tested it, I had the Windows Firewall turns off completely.
  It's had that nothing blocked in this way.
  Wireless worked well because we could always print.

  The Lenovo laptop could always
  printing AND scanning over the wireless connection

  Both analyze the types of employment has worked on the laptop:
  -A started from the "Scan" button on the front panel of the printer.
  -Started from the scanner on laptop computer software.

  So scan works fine on Windows XP but NOT on Windows 7 platform.

  I would like to hear from you when you have solved the problem,
  so that we can it works as it should do.

  HP, please respond to an e-mail.

  Sincerely,
  Graphics & new media designer

  Jesper Simonsen

  [text removed for privacy]

  I talked to technical support. I mentioned a level 2 technician. He told me that most of these problems is caused by a bad operating system and reinstalling it would do. I got back up, restore the operating system, restore the data and reinstall all my programs, but he was right about the problem to solve. Seems a lot of work to get the scanner to work, but my computer is slow and refreshing it anyway. Moreover, the level 2 technician also said that they would recommend to reinstall the OS every 6 months. Not so sure I want to spend hours 4 or more on this process, but my computer works certainly better!

  jandrgold

• How to print from iPhone / iPad for Officejet 4500 Wireless printer?

  I would like to print from my iPhone / iPad on my Officejet 4500 Wireless printer.  Y at - it an iTunes app I need to download?  My printer works fine print wirelessly from my desktop, just do not know how to print from my iPhone / iPad.  From what I read, it seems that this printer is not enabled for Airprint.

  Hello

  You can print from iOS using HP ePrint home & Biz.

  You can find more details below:

  http://support.HP.com/us-en/document/c02775166

  Kind regards

  Shlomi

• How to print on my hp officejet 6500 wireless from my ipad?

  When I try to print with my ipad via airprinter I get a message "No Printers Found AirPrinter", I have a HP officejet 6500 Wireless, what should I do?

  Hi Gynmom,

  I see that you experience problems printing from your iPad to your printer.  I would like to try the following steps.

  1. unplug the printer and the router for a minute.

  2. turn off your iPad.

  3. connect the router to the top.

  4. wait another minute plug printer upward.

  5 turn on iPad.

  6. try to print again.

  Let me know how it goes.

• Printing with Apple products on a HP Officejet 8500 wireless...

  How will I know if my HP OfficeJet 8500 wireless is compatible with AirPrint for printing? P

  Hello

  First of all, please check if your printer in the list:
  
  http://support.Apple.com/kb/ht4356
  
  If so, you can use this hotfix/install:
  
  iPad: http://www.apple.com/support/ipad/assistant/airprint/
  iPhone: http://www.apple.com/support/iphone/assistant/airprint/
  
  If NOT you must print using other applications (if applicable) such as
  
  http://iTunes.Apple.com/au/app/HP-eprint/id299531647?Mt=8

  Kind regards.

• Scanner does not work on HP Officejet 6500 Wireless with MacBook Pro

  I have the all-in-one Officejet 6500 wireless and print fine but the scanner does not work even after the implementation of suggestions on the Web site.  I recently installed Mac OS x 10.6.8 but I had the same problem with the previous software.  Scan worked fine until the last few months.  I get the message that "HP Scan Pro quit unexpectedly" or "Sorry, an unknown error has occurred", but no additional information.  I have re-installed the software HP twice but to no avail.  What can I do?

  Try the scan using the Image Capture in your Applications folder.  Click your scanner on the left side, click "Show details" on the bottom.

• HP officejet 4500 wireless: connecting hp officejet 4500 wireless to my Pavilion

  I had to have my restored computer do to a virus. Now, I need to reconnect my printer wireless? This is where I need help. MY printer is a hp officejet 4500 wireless and my computer is a hp pavilion touchsmart sleekbook. My operating system is windows 8, but I don't know if it's 32 or 64?

  Hi @5839, welcome to the HP community there.

  I read your post about how you had your computer restored and now install your Officejet 4500 Wireless turn it on for your system!

  I can certainly help you!

  Click on this link to get the drivers and download the software you need to run your printer to install again through having: software HP Officejet full feature and driver

  I hope this helps you, if you need help, please let me know!

  If you like my answer to your concern today, click on the thumb upward below!

  Have a wonderful Monday!

• Driver for Officejet 4500 Wireless all-in-one will not install after the upgrade to Windows 8.1

  Upgrade to Windows 8.1 on Pavilion g6.  OfficeJet 4500 Wireless all-in-one still print but not scan.  Downloaded driver full features.  Installation quit giving the error message "file not found".  Tried the 'chat' with no resolution sessions

  Thanks for the reply.  HP has called since then and was finally able to install the driver.

• Cannot receive faxes officejet 6500 wireless

  Hello

  I suddenly have problems to receive faxes. Alone was able to cross over early today, and as I understand it, it took 8 minutes to my fax machine to connect. I get error reports saying type is "received" and result in "error 244 *.» I tried instructions support on the HP site, and those who, unfortunately, were not very useful. One thing, I thought may be useful was turning power switch on the ECM - however, it is not all the instructions to do it on my model!

  I have the HP Officejet 6500 Wireless

  model E709n

  Running Mac OS 10.7.4

  My Fax is on a separate phone line: it's a VOIP line I've had for quite some time

  Any help is greatly appreciated! Thank you!

  Take a look at the link below, you will find a resolution hopefully:

  http://support.HP.com/us-en/document/c01661987

  Let me know if you need additional assistance. I'm here to help. Thank you!

• HP OfficeJet 6000 Wireless: can I use AirPrint on a wireless HP OfficeJet 6000, model C9295A

  My iPad can not find my HP OfficeJet 6000 wireless, try using AirPrint. This printer can use the AirPrint? I have to update to firmware maybe?

  Hello

  Your printer is not on the following list:

  https://support.Apple.com/en-AU/HT201311

  and not in the following list:

  http://support.HP.com/us-en/document/c02814760#N4001

  You can try:

  http://iTunes.Apple.com/au/app/HP-eprint/id299531647?Mt=8

  Good luck.