Similar Questions

• Newbie wanting to AIR w / extensions to native code and the Protocol of Android accessory

  My interests include prototyping and very specific to very specific real-world applications of programming solutions.  So I bought a Playbook after viewing the quick "prototyping" video in this blog:

  http://devBlog.BlackBerry.com/2011/12/BlackBerry-PlayBook-Arduino/

  I tell myself I can do cela or something similar with PIC Basic Pro and a Microchip IC.  Although it has been nearly six months, from what I can tell, the RIM developers have failed to deliver on explaining how to use native code and the ancillary Protocol Android to connect in series on client's port to the mini-USB of the Playbook.

  Is RIM people please, show us how set up the programming environment, use the code, the mini-USB port on client Playbook, the adapter USB (where to buy, what is it exactly?), so we can use the USB client connected to an Integrated Circuit Programmable to connect in series with an AIR running on the Playbook application.

  Kenneth Mark Klausner

  How this kind of thing is that you have the hardware (Controller USB etc.), and there different registers, buffers, etc. that must be handled.  The first layer of software, what made this manipulation, is a device driver. While in some operating systems (Linux, for example), you can write yourself, or port code Besides, material in the PlayBook is accessible only by the drivers as part of the operating system, which means that the RIM should provide their.

  These drivers are may be incomplete. We do not know that for some.

  Drivers expose a particular interface to the next higher step of the software, an interface that must be respected. This interface is generally quite low, and the driver can support the features that cannot be exposed to third party software, so for this and probably other reasons, we can not directly access (and are prevented by security mechanisms).

  There is another layer of software on top of the pilot, commonly called a library. This library is also provided by RIM, as part of the operating system.

  This library can be incomplete as well. We do not know the details, but I suspect someone who knows this level of the design of the system and who attended the BB10 Bluetooth and USB discussion group would be able to interpret what they heard there to clarify.

  It's this library which provides what we call a bit of hand-wavingly API 'USB '. This is an interface in C language, with a set of data and calls structure function definitions that enable higher level code perform different operations related to USB.

  If you want to write a DONKEY, you write about this library, not the level of driver and not material. You have no choice in this matter, as it is applied by the security of the OS.

  So to sum up, if we refer to 'USB API' they're talking about essentially the library routines, and it is necessary to talk to this API to get whatever it is the case here.  The API can be described in the header files (there is something), or maybe he's going to be an API different than what I see out there. Whatever it is, it is undocumented in other places at the moment, so all who want to enter this need to make much low level experiment (talking to the library).

  They can have the documents which cover this and perhaps code samples to talk to the library. If the version of the operating system we have has the incomplete versions or buggy drivers or libraries, this could explain why they have not pushed this documentation and code for us.

  I think that I heard that they are gathering input (requirements, use cases, comments) from people in this session.  Who tells me that they are still working on some details, and when they are at a stage like that they simply don't tell us publicly where they are, deadlines, or what it will look like when it is done.

  And so expect.

• Cannot change anything in the action center error code and the blue screen and stops.

  I can't do anything on my computer with windows7 can not install updaets or sofyware of security I get an error code and the blue screen and stops

  OT:everytime I try to change anything whatsoever in the action center ndour windowws blue security and my computer shuts down

  Hey Chrisb,

  You did changes to the computer before the show?

  Step 1: I suggest to start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• need of support code for the challenge code

  need of support code for the challenge code

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• HP 15-f305ddx: I haveva hp 15-f305dx with an error code and the password of the bios 58495227

  I have a haveva hp 15-f305dx with an error code and the password of the bios 58495227

  Thank you so much, you're the best

• I'm tryin to update my computer... I keep getting code and the error 646... I need help I am if confused as to what to do to get these updates... I tried to disable my firewall, but which is not good... Help, please

  I'm tryin to update my computer... I keep getting code and the error 646... I need help I am if confused as to what to do to get these updates... I tried to disable my firewall, but which is not good... Help, please

  Download and install the update/s who is / are relevant to your computer manually.
  IE: http://www.microsoft.com/downloads/en/results.aspx?freetext=974771&displaylang=en&stype=s_basic

  TaurArian [MVP] 2005-2010 - Update Services

• I got a new macbook pro and I want to spend my Adobe Creative Suite: Production Premium programs on it. I have no more the installation disc. I have my product code and the serial number for the facilities so. How can I do?

  I got a new macbook pro and I want to spend my Adobe Creative Suite: Production Premium programs on it. I have no more the installation disc. I have my product code and the serial number for the facilities so. How can I do?

  Download and Installation Help-

  https://helpx.Adobe.com/download-install.html

  CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html

  CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  CS5.5 - http://helpx.adobe.com/creative-suite/kb/cs5-5-product-downloads.html

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

• How can I fnd my claim code and the reprint of the web services information sheet

  Hi, I have a HP Deskjet 3520 and try to put in place the eprint.  I read the suggestions on the forum and the FAQ but I can't locate the web services information sheet I need to reprint for claim code.

  Could not find anything under Printer Control Panel either. Please advise!

  Thank you!!

  Hi Chris88,

  Welcome to the HP Support forums.  I appreciate that you try to configure the ePrint on your Deskjet 3520 printer feature.

  If you have the inkjet printer Deskjet 3520 with a C8994 product number this printer does not have the ePrint service.  The Deskjet 3520 printer only has USB connection and ePrint to function the printer must have an independent internet connection through a wireless or a wired ethernet network.  I've included the specifications of the printer for your reference.

  If you have the e-all-in-one printer Deskjet 3520 then we obtain the claim code.  You can request the information sheet of web services from the front panel of the printer, and there the claim code printed in blue. Instructions on how to get it can be found in the section titled "to print a document using ePrint' in your on page 15 user's guide.  Please follow the instructions in step 1.

  HP Deskjet 3520 inkjet printer specifications

  User's Guide e-All-in-One Series HP Deskjet 3520

• The create a System Image will save the FPGA code and the RT code?

  I have some cRIO systems which were broadcast in our manufacturing plant for some time. A slight problem has been discovered in the programming and created a workaround solution, but a fix should be implemented. Currently, I have no way to test my new code without loading on the cRIO and it works on the tool while the product is running. If there is a problem and I need to do some debugging, the tool cannot be down for an extended period. I would write a vi that will save an image of the cRIO so I can reload the software that is currently running and prevent a situation of prolonged downtime.

  My question is, when I did in the past with a product that has different tests, calibration and the final client software RT, it seems that the code FPGA not be saved (not a big deal at the time since the new FPGA code was compatible with different deployments RT). The new FPGA code won't be compatible with the old RT software, so now I'm worried. I would like to just check on it until I have all the boss breathing down my neck. If the service will not save the bitfile FPGA, is there anything else I can do for the tool to return to the previous running state while I solved problems that may exist with the new code review? The original code was lost by my predecessor. Otherwise, I would use just that.

  Hi Jeremy,.

  You are right, because the create a System Image does not record the bitfile with the image of the RT. Using the configuration system API, you will need to deploy the RT image and then the bitfile FPGA compiled later. To ensure that you can return to the previous version of the software running on your RIOs, you could simply save the current image and bitfile before deploying the new image and bitfile.

  However, the best way to proceed is to use replication Deployment Utility (RAD of OR). I have provided the link to the tutorial on the wheel, where you can download the utility. This exe will make images of the any of your RT targets and will also include the bitfiles with them. You can also deploy these images to several targets at once. In particular, you can read about the Bitfile (s) configure for FPGA Deployment Flash; the bitfile will be deployed at the start when stored in flash memory.

  Replication and deployment (RAD) utility-

  http://www.NI.com/example/30986/en/

• error mess. No supported cpu and the computer turns off

  I have a hp p6210y.  I took my computer and looked at herself, and the guy told me that my motherboard was likely bad.  He told m that the motherboard of the computer are bad and he advised to do not to buy a new one because it will go as bad.  My motherboard is a pegatron m2n78 - la.  It has an AMD athlon ii 620 quad-core. Well, I found one on ebay for about $100.  After that I put the new one where said pegatron m2n78 - la on it like that old one does.  I did put in the new processor.  The only different thing I noticed was as soon as I put on it instead of hp compaq said.  I'm a noob to all this.  The first I guys I listened to said that it was the hard drive and it has not fixed this is why I had in the type of computer and started to do myself.  Its been a learning experience for me if I look at the positive side of everything.  But now I have an extra hard drive new (seagate sv35.5 500 GB) sitting on my desk. Do I have to get a power cord with it also. I have the sata cable or whatever.  or I can run 2 hard drive at the same time.  Thank you very much

  FYI... simply because the replacement motherboard has "M2N78 - LA" printed on it, does not mean that it is the same as your original plate. HP has a least 4 different motherboards all models "M2N78 - LA" but named Viola, Violet, Violet3 and Violet6. These motherboards can support different processors, socket, extension and ports of i/o slots back.

  Here are the specifications of your desktop HP Pavilion p6210y and its M2N78-(purple) motherboard. Please make sure that the motherboard is good. Given that HP sells computers under the names of the HP and Compaq, you may see Compaq or HP screens 'splash' at the start of the brand. Although this should not affect the operation of the computer, the lack of good 'tattoo' can prevent you from using your recovery disks.

  Please send Bravo

• DeskJet 3050 a J611 series: I received a 0XB8268688 error code and the printer is offline. How can I solve this?

  Word and Adobe tell me that the printer is offline.  I received the error code when I tried to turn the printer off.

  Hello

  Please try the steps below...

  1. While the printer turned on, unplug the power cord from the back of the printer.
  2. Turn off the wireless router.
  3. Wait 30 seconds.
  4. Connect the power cord to the printer. Look for the error.
  5. If there is ERROR, like you said, printer then needs to be REPAIRED.
  6. power on the router and look for the error. If there is ERROR, like you said, printer then needs to be REPAIRED.

  If there is NO error and the printer shows offline when printing then download and run the HP print and Scan Doctor www.hp.com/go/tools

• code and the confirmation e-mail

  Hello

  How much time takes to receive the email confirmation of the purchase and the code? I did a school plan but I have still no product in my adobe ID. Why is this?

  Thank you

  1-2 days working pst after you submit verification of your qualification status, Adobe Creative Cloud training FAQ

• When you try to download my code, and the series only. There is an option to use a 24-bit or a 64-bit format. Apparently I choose evil, but I can't go home to change.   How can I clear it so I can continue the download process

  When you try to download my code and serial No., there is an option to use a 24-bit or a 64-bit format. APPARENTLY, I GOT ONE WRONG, but I can't go back to this page to change this option. It is a question...

  Do you mean 32-bit or 64-bit?

  What version number and program?

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  - and also read https://forums.adobe.com/thread/1146459

• Code and the live button is inactive

  Im going on the tutorials css - layout.html

  I am unable to select the Code and live and code and live are not black grey

  If you could, please post a link to the tutorial in question that can help.

  But if you're in a CSS file, you are in code view.  There is no design or live view in a single CSS, HTML file (or other files, scripts, i.e.: PHP) have multiple views.

• Code and the database tables in different schemas

  Hello
  My version of db: database Oracle 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
  
  I would like to understand the advantages and disadvantages of the following situation:
  We have only one request.
  The design of the db for this application has 44 paintings, of which 28 are base tables related by PK and FK relations. The other 16 are look upward and refer to tables that are not related to one.
  The team has decided to place the tables in a diagram 28 A and the other 16 in another schema B within the same database. (The reason for this is... because it's done in other projects to do it here too).
  Coming now to the code (stored procedures, functions, packages, etc.). Teams want to ask most of the code in the diagram B with the Ref 16 tables. (the reason being again the same).
  What are the advantages and disadvantages this?
  Please advice.
  
  PS:
  I have googled and find something on these lines:

  cons:  
  o harder to manage
  o harder to upgrade
  o harder to patch
  o harder to maintain
  o causes your shared pool size to increase 1,000 times (shared sql goes down the tubes)
  o takes more space
  o queries against the dictionary will be impacted
  o latching on the shared pool goes WAY up (latching = locks = serialization device = 
  slows you down)
  
  pros:
  o none that I can think of.

  From my experience, if you see natural divisions that give you smaller patterns, well contained, you should take advantage of them and start with separate schemas. If done correctly, it can greatly improve the maintainability of your application.

  Assume that your initial project will have 60 paintings and they might fall into three groups of 15, 20 and 25 tables respectively. There are also objects of code such as PL/SQL packages. Your choice is:
  -Use a single scheme of 60 paintings, suppose that with 100 objects in code.
  -Use 3 diagrams divided as described. The total code objects will probably be a little more that unique schema design, because they need to provide interfaces with others. So let's assume that schemas will have 30, 40 and 50 code objects each.

  Now, wait 3 years.

  The history of single-schema:
  -The single-schema is passed to 120 tables. There has been a corresponding increase in code, now more than 200 objects. But they are very complex. Over time, each piece of code will interact with the tables more and more and many other objects in code.
  -You (the architect or Manager) can not really apply any internal for this structure since no subsidy is required to add dependencies. Therefore, if you change a table there is a vast impact.
  -You can easily divide the responsibilities because everything affects everything else. You can't manage simultaneous development efforts because the impact widespread changes cause the same tables/components to be affected by multiple projects. If you have the project execution dependencies / as you have interdependencies technique/code.
  -You have a "big ball of mud" and it is very difficult to get out of this situation.

  Multi-schema history:
  -Each of the 3 original patterns has grown, but some more than others. A fourth was added a year ago, when there was a major expansion in a new district, as a result of "natural divisions.
  -On the inside of each of these schemas, it is always a challenge to impose internal structure. But those patterns more smaller and therefore more small problems.
  -Through schemes, subsidies are necessary to allow interaction, this is not a "wild west" where everyone can access everything (and introduce dependencies on everything). Teams to define interfaces (packages or the views that are specifically intended to be interface points) where the interactions with other scehmas are necessary.
  -If changes to a table are needed, the impact can be limited to the schema that contains naturally. You know that no one else has created dependencies at this table, because you were never issued grants on this.
  -The responsibility for these schemas was divided between 2 teams, each team having full responsibility for its 2 diagrams.
  -Teams can complete projects much more easily, even with a parallel development, because there is less than a "domino effect" with each change.

  Now, these benefits depend on "natural divisions that give you the diagrams smaller, well contained." If you make the wrong choice here, you will always have a mess. You design with the end in mind scenario.