Is CompactRio best solution for me?

I develop the couple-tour and need to control, hydraulic test machine in addition to saving the graphics of each couple. Control Panel will use the industrial Joystick (to control 5 proportional valves for directional hydraulic) and also requires the adjustment mechanism of pressure/flow (at pressure solenoid control and flow regulators type). Another part is the record - I need to record and report the graphics of each couple, but torque for each individual test values are running user-defined and system should "fire" dump valve very precisely (real time) to the preset torque value (the system will read input load cell) and stop the system once the desired torque is reached. I'll also have in turn against the sensor, sensors etc. of pressure in the system.

I will definitely use LabView, but I'm not sure whether CompactRIO is the best device for the control and data acquisition in my case or I need something else. I don't know how CompactRIO manages changes to execution and PWM (for the proportional valve controls). Any help will be much appreciated.

Nash


Tags: NI Hardware

Similar Questions

  • Is alcohol the best solution for the cleaning of the product

    Sometimes you print quality problems. You cannot print the colors, bad impression or bad imagingin during the scan images.

    You go through all the troubleshooting steps away as cartrides, glass, rollers of the printer cleaning and replacement of cartridges.

    Ask yourself what you should used during the cleaning of the unit?

    WATER and a LINT cloth, would be the best solution for cleaning. You can absorb the water on the cloth and clean the printhead, cartridges, the scanner glass, rolls and any other area that needs to be specific to the unit.

    ALCOHOL IS NOT AN OPTION. This can damage the strips and the contacts on the cartridges and the print head. The next time you need to clean your product, water is the best option.

    Hope this helps everyone.

  • Best solution for installation of Photoshop and Illustrator? Issue of the BONE.

    Best solution for installation of Photoshop and Illustrator?

    I works with InDesign CC 2014, but cannot download the PS or I ("you run an operating system the program can't"). My current system is: OSX 10.8.5.

    Any thoughts?

    Congratulations in advance.

    Requirements for programs of cloud... scroll down and check each program

    -http://helpx.adobe.com/creative-cloud/system-requirements.html

  • What is the best solution for this idea...

    I have a task I'm trying to test and understand what would be the best solution for this, any recommendations would be appreciated.

    Devices at your fingertips:

    -2 ESXi hosts

    -1 iSCSI SAN OpenFiler (new just installed the app)

    2 ESXi hosts run a small amount of virtual machines that are all in the same domain.  I want to have a file server (or a repository somewhere) that houses a folder with easily accessible software (OS, Office, etc.) on the field.

    According to me, that if I made a virtual machine with a large hard drive and share the software, this would not be the best way because it would be dependent on the OS.  Someone has talked about doing a separte VMDK for it and then install it on the operating system on the virtual machine. This way I could always remove the and mount it somewhere else.

    It seems a bit weird to me that the software within this "shared folder" will also be sitting on the data store (if I create a virtual machine and need to use the OS/etc).  Not that doubles the space for the same software (in the comments, then the data store)?

    What is the best approach to make this action which can be accessed at the prompt (mostly windows) in the field?

    What is the best way to stay away the software doubles in action and on the data store?

    Please forgive me if I put interpereted your question.

    The problem you seem to face is that you must mount the ISOs of VMS software and physical systems that are on the field.

    (please, correct me if I'm wrong on this)

    If this is the case, then the best way to do would be to create sharing NFS on the openfiler, if you use openfiler to main databases also then he would be better for sharing this was separated to prevent the other help to be able to tamper with the VMDK and VMX files for your virtual machines.

    This could then be mounted in ESX to access the ISOs. While being easy to install on Linux and Windows machines to access the ISOs.

    If you have questions about NFS mounting in windows, so, this link may help

    http://sagehacks.WordPress.com/2009/01/21/HOWTO-mount-NFS-shares-under-Windows-7

    If you are needing to access the VMs software and it is mainly the downloading ISOs then th ISO directly to the data store is possible.

    This allows you to use ESX to mount the ISO on the virtual machine.

    On the point that the software will use double disk space when you install the software on a machine virtual car will be on the network share and the VMDK virtual machines in the data store. That's right, and that's by design.

    Each virtual machine under ESXI is 'independent' (http://www.vmware.com/virtualization/virtual-machine.html)

    This means that each virtual computer must have its own copy of the application.

    This perspective reflection of each virtual machine as a separate system of 'physical '. They interact with each other as if they were physical systems.

    Each VMDK resembles a physical hard disk. Being accessible (in most configurations) 1 VM at a time.

    So if you had a set of physical systems connected to a domain and I wanted to install an application on each one, then each would have its own local copy of the application. It's the same thing with virtual machines.

    However

    If you configure a set of physical machines so that you run the software from a network share. It is possible to do the same thing using virtual machines using the exactly the same configuration. However, the chiefs more associated to this are important in both cases.

    Concerning

    Cyclooctane

  • Need the best solution for the special case

    My version of oracle is 11.2.0

    My name of the table is nitkhush and have a column named long_string of long data type

    The values of the tables are

    LONG_STRING

    Vincent
    Murali
    Bharath
    Nitesh
    Perron
    Married


    I know its not appropriate to use the long type, but again I want to understand the concept, so I've used and should
    output is


    Vincent Kumar
    Murali Kumar
    Bharath Kumar
    Nitesh Kumar
    Perron Kumar
    Married Kumar


    I tried this query
    Select 'Kumar ' | long_string nitkhush but error is ORA-00932: inconsistent data types: expected NUMBER got LONG so I tried to convert in varchar2 pl/SQL

    DECLARE
    LONG temp_long;
    temp_var VARCHAR2 (4000);
    BEGIN
    SELECT 'Kumar ' | long_string
    IN temp_long
    OF nitkhush;

    temp_var: = SUBSTR (temp_long, 1, 4000);
    Dbms_output.put_line (temp_var);
    END;

    but still unable to do as I thought store at length and then using SUBSTR function it will convert and store it in a variable of type varchar2 data but it does not, and according to my knowledge CAST do not long support for the conversion of varchar2 so someone can give me best solution but I need complex queries wholesale as it should be as short as simple to understand so that all the world can understand it easily... And also through the procedure, I tried so that execution of the procedure but still unable to... I tried throgh procedure also all as written above...
    Thank you
    Nitesh Perron.

    If you have to / want to change the default value of a column, you should not update the system tables but use an alter table command
    And by the way, it works

    begin
      for r_col in ( select *
                     from user_tab_columns
                     where table_name = 'MY_TABLE'
                     and data_default is not null
                   )
      loop
        dbms_output.put_line( r_col.data_default || 'Anton' );
      end loop;
    end;
    
  • Is the time capsule the best solution for me?

    Dear Apple Support,

    I'm looking for a good solution for the following:

    -economy of mey Macbook Air 13 "wireless backup

    -Storage of files from various media (videos, basically)

    -Playback of multimedia files (iphoto library and mkv videos) on my Smart TV (wifi capable, and endowed with a multimedia player)

    I think a Time Capsule and Apple TV, but before buying it, I want to be sure those will satisfy the above requirements.

    Thank you for your answer!

    Kind regards

    Tamas

    If you format a drive for mac to use as a Time Machine backup format there is a chance your smart TV will be able to read this disc.

  • What are the best solutions for data warehouse configuration in 10 gr 2

    I need help on solutions to provide my client for the upgrade of the data warehouse.

    Current configuration: database Oracle 9.2.0.8. This database contains the data warehouse and a LOBs more on the same host. The sizes are respectively 6 terabyte (3 years retention policy + current year) and 1 terabyte. The ETL tool and BO Reporting tools are also hosted on the same host. The current configuration is really poor.

    Customer cannot go for a major architectural or configuration to its environment changes existing now due to some constraints.

    However, they agreed to separate the databases on separate hosts of ETL tools and objects BO. We also plan to upgrade the database to 10 g 2 to achieve stability, better performance and overcome the current headache.
    We cannot upgrade the database 11g as the BO is a 6.5 version that is not compatible with Oracle 11 g. And the customer cannot afford to spend anything else than the database.

    So, my role is very essential in providing a perfect solution for better performance and take a migration successful Oracle from a host database to another (same platform and OS) in addition to the upgrade.

    I got to thinking now of the following:

    Move the database and Oracle mart for separating the host.
    The host will be the same platform, i.e. HP Superdome with 32-bit HP - UX operating system (we are unable to change to 64-bit as ETL tool does not support)
    Install the new Oracle 10 g on the new host database and move the data to it.
    Discover all the new features of 10gr 2 in order to data warehouse, i.e., introduction of Clause SQL TYPE, Parallel processing, partitioning, Data Pump, SPA to study the pre and post migration.
    Also at RAC to provide more better solution than our main motivation is to show an extraordinary performance improvement.
    I need your help to prepare a good roadmap for my assignment. Please suggest.

    Thank you

    Tapan

    Two major changes since the 9i to 10g which will impact performance are
    a. changes in the default values when executing GATHER_ % _STATS
    b. change in the behavior of the optimizer

    Oracle has published several white papers on them.

    Since 10g is no longer in the Premier Support, you'll have some trouble connecting SRs with Oracle Support - they will continue to ask you to use 11 g.

    The host will be the same platform, i.e. HP Superdome

    Why do you need export if you do not change the platforms? You could install 9.2.0.8 on the new server, the database clone and then level to 10 gr 2 / 11 GR 2.

    Hemant K Collette

  • Best solution for 2 + monitors CS6

    After reading the discussions on the faults of external hardware (matrox, BM, AJA)--or at least the necessary drivers, I want to find the right solution for the use of two monitors of computer for my workspaces and a third (HDMI or HD SDI) output for a screen 37 inches (no broadcast, but decent Panansonic LED) program. I read tons of specs and messages... which is better? I'm planning a new workstation CS6

    1. double Quadro 4000 s

    2 dual GTX 570 s or 680

    3. a new idea?

    Why Nvidia can all three active ports on the Quadros?

    Wishing Adobe would post card just above the minimum, but a kind of details on the levels of jobs according to the types of workflow...

    Thank you

    Diane

    PS I used a dispatcher of signal USB HP $50 on CS5 for a few months - it's been great - allowing me to spread my work space between two HDMI screens to the panny monitor. But that can't really be the Solution, can it?

    GTX 670/680 cards are supported up to 4 monitors. Double cards are not supported, nor is it necessary for the range of Kepler of cards. Well, a little more in detail, you can install two cards if they use the same driver, but only will be used by PR and the other only for management of monitors and which is a little expensive with Quadros or the GTX 570/580, when a single 670/680 does the same work at a lower cost and with better performance on most systems.

  • BlackBerry Z10 best solution for Google Drive on BB10 (Z10)

    Hi all

    Just after some advice. I need to get my Z10 BlackBerry sync with my GoogleDrive files.

    What is the recommended application to use as Google or BlackBerry have not resulted in an official solution

    Thank you very much

    Ben

    You will get a number of recommendation, but here's the first, and in my humble OPINION the best.  Playcoud (available in the world of the BB).  Playcloud takes in charge Google Drive, box, Dropbox, OneDrive (formerly SkyDrive) and many more services.  If you have activated the Remote File Access in BB link, you can also access your desktop through her files. It also acts as a file manager for your card device and mSD.

    I hope this helps.

  • ARTICLES CMS BEST SOLUTION FOR A PORTFOLIO FOR ADOBE MUSE.

    Hello

    I'm looking options to set up a blog for a portfolio site

    The qualities I'm looking for:

    It should probably be responsive.

    Can the title

    Can be updated via CMS backend

    Text or images must be optional

    Have lists of at least 4 pages leading to individual pages for portfolio or product pages.

    I briefly checked the below examples but do not understand the answers I'm looking for I am new to Articles

    RSS feed widget

    Mumbler

    Publiz

    and the other 2 options have passed my way.

    I need of detailed explanations and advise what the best option to meet my needs.

    Kind regards

    Aaron

    The best independent and native solution to blog at the moment is probably this one:

    Muse blog

    You have a blogging system, which is managed completely within the Muse, allows you to post and comment by all conceivable variants, and even contains a multi users system.

    If you are looking for an integrated system of self-hosted blogging (not simply a tumblr blog) there no real alternative at the present time. Maybe MuseThemes "Agent" will be a solution, but it usn was available yet.

  • Best solution for & quot; nested & quot; by dragging

    What is the best approach to enable drag nested?
    Here is an example of what I mean with "nested":

    I have an application that displays an image of a country, since the image is larger than the area that displays the image is movable, so that the user can choose which part of the image he wants to see.
    hOn top of the image are the cities of the country, these must also be moved because the user must be able to change the location of the city if the current is wrong. The 'friendly' search app in like this:

    < application >
    < DynImage id = "map" source = "USA.jpg" >
    < decorators >
    < positions >
    < label city = "NYC" >
    < label city = "LA" >
    < / positions >
    < / decorators >
    < / DynImage >
    < / application >


    My request is made up of 2 generic components made by me:
    DynImage - takes an image and makes zoomable, draggable and puts additional layers ("Decorators") above this one that also gets a zoomed out.
    Post - takes it is childs and makes draggable and send an event when a child has been moved with the old and the new coordinates.

    The two components listening 'mouse-downs. "
    When the user tries to move the map, everything works fine: the user clicks on the map, the map.startDrag () function is called and the card is swiped.
    The problem arises when the user wants to drag the city: when the user clicks on the city, the town.startDrag () method is called, AND directly, thereafter, given that the user has clicked also the underlying plan, the map.startDrag () method is called. What makes the card get drawn but not the city.

    This is exactly how the API said that there should be:
    startDrag - "lets the user drag the specified sprite. The sprite remains draggable until the Decree of way explicit through a call to the method Sprite.stopDrag (), or another sprite made draggable. A sprite is draggable at a time. »

    I want to make is that only the city get moved when the user clicks on a city. The good thing is that the component of the Position is the one who first gets the event. This means I could put some kind of statement in DynImage who don't call map.startDrag () If no move is made, but it is possible to check this? (I tried DragManager.isDragging which displays 'false').

    What would be the best way to solve this problem in a component-fashion way?

    Hehe, as you do this often, I found a solution right after that I posted this. But if someone has a better suggestion please answer.

    One solution, perhaps not preferred, would be to leave the component call mouseDownEvent.stopImmediatePropagation (); What would make the DynImage never get the event. It is, of course, not so good since it may 'break' functionality for other components who are waiting for this event.

    The alternative, which is obvious for talented people normally :-) would probably be for the DynImage to check the mouseDownEvent.target property. If the user has clicked on a city, the city is set in this property. But if the user has clicked directly on the image, then this property is that loader object-images. In other words to verify if the card should be dragged I can just check if the following is true:

    image is mouseDownEvent.target.parent

  • Is an array, the best solution for this problem?

    Hello

    I work a demo where a couple of small games come in a Panel. There is a main menu which you bounce around to select the things (games as well as other applications.)

    When one party runs, it takes up the entire jury. When two or more run, they run in a format "mini." In addition, when a game is running, a special 'return to the game' button in the main menu.

    It is a click by dog and pony, see the demo. It is not a production application, but it should work well enough to be played with internal clients. So it must work well.

    At this moment I have a few variables put in place as follows:

    var gameActive:Boolean = false;
    var gameDual:Boolean = false;

    In the launch menu and my game function, I check these (and one or two others) variables to see if I should do things like show a mini-version of the game or show return to the play button. I added many features, it becomes a bit difficult to handle.

    At stake is the games. Let's say that I only have two. I could make a table and then load in the name of the game, when a game is started. I could check this table in my functions to see not only if the games is launched, but the game is launched so I can use the full or mini games as the case may be.

    Is this a good approach, or is there a better way? I'm rusty with my code and not super comfortable, making things right now. But I could go on like this if it was the best.

    There's not much to it.  This is the only 3 things that you are likely to need to do with your associative array:

    var yourAA:Object = {};

    function addAAItem (aa:Object, o: DisplayObject) {}

    AA [o.Name] = o;

    }

    function removeAAItem (aa:Object, {o: DisplayObject}

    AA [o.Name] = null;

    }

    function aaLength(aa:Object):int {}

    var i: int = 0;

    for (var s:String in aa) {}

    i ++ ;

    }

    Return i;

    }

  • What is the best solution for adding muzzle flashes?

    Is there a better way to add flashes snout in a scene involving gunshots?   I've seen a number of tutorials online that basically say "he just go find some elements of the flame and add them in."    You wonder if it's actually the way to go.

    I'm looking at videocopilot.net, they have a pack of element (VIDEO COPILOT |) After Effects Tutorials, Plug-ins and Stock images for Post Production professionals) but I was wondering if there were other options available.

    Stock foorage is the way to go. Motion path the mouth then tie scale and use add or screen blend mode.

  • What is the best solution for Win2K server without?

    I am running VMware server 2 on a Windows 2000 Server computer. Single processor with a few guests of ubuntu hosting web apps. If I want with VMware 2 or is there a better free vmware I should up grade too? It's a Dell with the old installed dc Perc raid controller scsi/320.

    Are you unhappy with VMware 2 on W2K? I guess you are thinking about ESXi as it's the only other free VMware virtualization platform.

    Why do you feel the need to change? Are there questions? Or you just think improve it?

    If you are moving to ESXi, you should be aware that you lose the host W2K Server itself.

    AWo
    VCP / VMware vEXPERT 2009

    \[:o]===\[o:]

    = Due to a lack of employees, human beings humans are working here. -Treat it with care, they are rare. =

  • Widget displays daily - best solution?

    Hello

    I made a widget that shows 40 new each morning.

    For the moment, I push the news every morning, as a string of 40.

    When my widget news, it stores it in a database of google gears.

    On my index.html page, I have a table. Each line is a new.

    My problem is that it is very long to load.

    ------------------------------------------------------part of my load method ------------------------------------------

    If (rs.isValidRow ()) {}
    Add entries to the table

    While (rs.isValidRow ()) {}
                                       
    "linkTable.innerHTML +="."+ rs.field (1) +""+ rs.field (2) +""+ rs.field (3) +"";
                      
    RS. Next();
    }
    RS. Close();
    }
    Data.Close ();

    ------------------------------------------------------------------------------------------------------------------

    If I go to another page and back to the index.html page, I still have to wait for loading...

    What is the best solution for this kind of request?

    Thank you very much

    The manipulation of the DOM is extremely costly on a mobile browser. Whenever you update the DOM it will recalculate a layout and re - calculate the information on the page.

    In your code example, you would be able to accelerate a lot just using a variable to concatenate all your DOM elements in the first loop and then just call "linkTable.innerHTML" once to then update your page.

    Your code is now updates the DOM 40 times and whenever it updates, it must recalculate the page layout. Each update of the 40 will be progressively slower because the DOM increases in size.

Maybe you are looking for

  • windows viruses have not start or open

    Windows xp the computer for some reason any virus and wont let me get into windows had this problem once before and can not remember how I fix I know to start in safe mode, but then what I do I'd like to come back to factory settings and no viruses d

  • I can't get into safe mode

    Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: You have problems with programs Error messages Recent changes to your computer What you have already tried to solve the problem I have Wi

  • Toshiba Satellite laptop - how can I tell what programs I should be running at startup

    Original title: How can I tell what programs I should be running at startup I have a toshiba laptop satellite, since 2008, I don't know what programs should run at startup and those who should not

  • ScanJet G3010: G3010

    I hope someone from HP is reading this forum. Why can't provide you a full Windows 10 upgrade for this scanner? Workaround gives only the basic features. Cannot scan to PDF, etc.  My HP printer that I bought in the middle of the 1990s is supported, b

  • BlackBerry Smartphones FourSquare: error pop up

    I downloaded the app Foursquare and its gives me an error pop up. My phone is practically useless. I know that I can remove it through the PC, but I disabled accidetally 'connect as hard drive' prior to installation of FourSquare. Then when I connect