Is crushed, now I can not detect the router

Similar Questions

• Audio input Inspiron 15 3000 can not detect the headset

  Audio input Inspiron 15 3000 can not detect the headset, but audio dell can detect something trendy. However, the playback sound device cannot detect any helmet. Now I only get gurgling in the helmet. How to solve this problem?

  Hello. To test the headphone switch the native Windows audio driver Realtek audio driver.

  1. open Device Manager (type devmgmt.msc in the box of Windows search).
  2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
  3 Select this option to "Update driver software".
  4. click on "Browse my computer for driver software".
  5. click on "Let Me pick from a list of drivers on my computer".
  6. put the "Show compatible hardware" check box if not already checked.
  7. in the list of devices, click on 'High Definition Audio"(native driver).
  8. click on "next".
  9. in the update driver warning box, click 'Yes' (the driver).
  10 restart the portable computer if you are prompted. If not invited, so no need to restart.
  [To return to the Realtek driver, do it again but reverse the names in steps 1-6.]

  If it is still bubbling even with the native driver, test by using other headphones. If still no luck then probably hardware failure. Contact technical support for warranty repair.

  If it works fine with the native driver, then the Realtek driver is buggy. Try a different version of the driver. If you need help with this answer comes back with the full model name (something like "Inspiron 11 3147", etc.) and which operating system there.

• After Encrypting files, I had to reinstall my windows and now I can not decrypt the file

  * O.T. > encrypted files

  So after encryption of files I had to reinstall my windows (changed the name of the owner) and now I can not decrypt the file

  After attempting to decrypt the files, I'm promped with this message:

  Attribute application error

  An error occurred applying attributes to the file:

  driveletter\filename

  Access is denied. \

  I want to say that I added my administrator name in the Security tab, and then gave me full control over the files, but that did not work.

  Hello

  I understand that you cannot decrypt files previously encrypted in Windows 7 after you have reinstalled Windows.

  • What program did you use to encrypt the files?

  From now on, I would ask you to refer to similar questions discussed in the thread below links and check the status.

  Cannot decrypt previously encrypted files

  I'm unable to decrypt files encrypted after reformatting the hard drive.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• can not detect the iphone after upgrading 12.5.1.21

  Set to update to the latest version of itunes (12.5.1.21) and now itunes does not detect my iphone.  tried to remove the lockdown folder. tried to restart all devices.

  Windows 10 with all updates installed. Someone at - it suggestions?

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support Apple version of the above opinion.

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates. 64-bit users might also try the alternate build Download iTunes for Windows (64-bit-for older video cards) , which is sometimes a useful workaround.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you're back 12.5.1.21 to 12.4.3.1 or 12.4.2.4, for example, then you will also need to restore the database of the library using the method described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• Wireless can not detect the connection my TP Link router (SSID)

  Hello

  I bought Pavilion G4 - 1346tx Notebook PC last Sunday(15/04/2012).

  Since then, it cannot detect/find my ssid from my router. any other device inside the House can detect and connect. only my laptop cant. My Wifi card model: Broadcom 4313GN 1 x 1 adapter Wifi 802.11b/g/n

  I tried to change my router mode and etc2, always without prevail. I downloaded the driver with the latest version (5.100.82.82 of the HP website) that the previous stock (not sure which version) are still not.

  Please help me with this. I read two or three theme with the same problem and the solution, but the solution link is broken or can not find the driver. Help me ~ ~ ~

  Thank you. Appreciate the help...

  Solved in Paul_Tikkanen to:

  WiFi problem solved

• LabVIEW can not detect the network drive so that other applications can.

  All network drives are mapped correctly and another application such as micro soft office or windows explore can see the correct mapping LabVIEW can not see the mapping? No idea how to solve this problem?

  -VS

  The solution: Add EnabledLinkedConnections to the registry

  https://TechNet.Microsoft.com/en-us/library/ee844140 (v = ws.10) .aspx

• L7780 HP 'add a device' can not detect the printer on the network

  I have a HP OfficeJet Pro L7780 printer and a laptop running Windows 7 Hp. The HP Solution Center has stopped working recently and now gives a message error "HP Solution Center cannot work because your installation of the device is not complete."

  I've uninstalled and reinstalled the software "OJProL7X00_Full_14.exe" and when I go to 'Add a device' it cannot find my printer on the network, even when I enter the IP address.

  I ran "OJ6500vE709_Scrubber_14.exe" - bird 1-2-3-4 and it did make a difference.

  The printer is connected to the network and I can add it as a printer in the window "Devices and printers" window so I can print to it, but without the HP Solution Center software, I can't scan.

  So Windows can detect the printer on the network and when I add the printer in this way, all 4 computers connected to our network can print to it fine.

  HP Print & Scan Doctor detec the printer on the network can. When I run that it is said that the comprehensive software solution for your product is not installed on this computer and when I click on the button 'Install Software', need me just the OJProL7X00_Full_14.exe file. The software seems to install fine but I can't add a device.

  HP printer install wizard for Windows can detec the printer on the network. When I run that it is said that the current full HP software is already installed and drivers seem to be installed correctly. A test page will print perfectly.

  But "Add device HP A" not somehow the printer detec.

  Please notify.

  Hello Impact,

  I see that you spent a lot of time trying to solve the problem of the HP Solution Center not allowing you to scan. Uninstall and install it, rub the software and execution of printing and scanning Dr. / Printer Wizard are all the steps I would have suggested do you.

  I would like you to follow the steps described in this document from HP: the progress bar on the Software Installation stops or stalls, many steps in it you all ready done but please follow the document from top to bottom.

  Before you start to trouble shoot the issue still provides also the computer is not connected to a VPN (Virtual Private Network) and you can access the printers on-Board Web server by entering the printers IP address in Internet Explorer.

  Let me know how this document from HP has helped.

  Thank you

• Computer can not detect the printer so that connected via USB

  My computer runs on Windows 7 Professional and my printer is model # D110a.

  My printer has worked fine since I got it, but a few weeks ago, my computer has been infected by a virus that forced me to reformat and reinstall everything. I installed the necessary software from the installation CD supplied with the printer, but when I try to connect my printer through the 'Add Device' option in the Configuration menu, my computer does not detect even if the printer is on and physically connected by a USB cable.

  Help please, I don't have the money to buy a new printer.

  No problem. Just glad that you solved. Can you go ahead and mark this as resolved to close issue? Thank you.

• reinstalled xp and can not detect the modem can't get Armani to set

  Up to three devices that need drivers

  Think I have Legacy Audio
  and audio codecs. I am looking for the drivers now

  Hello

  Here's some information that I asked. If you are reading this, please make new answer in this thread, please do not create a new issue just to answer, click on reply to a post on this topic.

  First of all, you have transcribed the computer not section the System section. To repeat my instructions on the previous thread...

  Hold down the Windows (between Ctrl and Alt) key and press the Pause break key. What is stated in the "system:"section (specifically looking for anything that tells you what is your level of service current pack, which will be either 1, 1, 2, 3 or nothing shown)? "

  Second, please do the following...

  • Click Start
  • Click on run
  • Type devmgmt.msc and press ENTER, this will open Device Manager window
  • Enlarge (click on +) on the section network cards - what is listed?
  • Similarly, what is listed under other devices?

  You tried to read too much into the information I requested. Even if what you have given can help, for example, it is about what I would expect to...

  Laptop model: Toshiba Tecra N723 (being brand, range and model respectively)-Please confirm

  Soft modems do not communicate wirelesly. If you work your PC wireless will "talk" to some router/wireless access point that provides your connection to broadband via a built-in wireless adapter not a soft modem. This router/wireless access point is what I need the number of brand and model. Perhaps, for example, Netgear DGN1000 or D - Link DIR-835. There are literally hundreds of routers out there, I need to know your brand and model.

  Tricky

• RECOVERY CD CAN NOT DETECT THE HARD DRIVE

  Hello!

  I HAVE HP PAVILION xt412 NOTEBOOK. AFTER THAT IT CRASHED, I TRIED TO RECOVER MY LAPTOP USING THE RECOVERY CD.

  AFTER A WHILE A MESSAGE COME TO SAY "SETUP COULD NOT DETECT ANY HDD, PUT IN PLACE WILL LEAVE."

  BEFORE THE CRASH IT WAS WORKING VERY WELL, NOW I DON'T KNOW WHAT TO DO. I'D APPRECIATE ANY HELP.

  Thank you.

  Looks like your hard drive failure caused the accident. You need to replace it and then start with recovery disks to install hard drive again.

• I have reset my etec router and now I can not past the prompt 192.168.1.1. My pc is 8 years old and very, very slow

  I tried for two days now to restore my internet connection.

  I tried for two days now to restore my internet connection.

  192.168.1.1 is probably access your router's IP address and it could be a Linksys.

  If you reset your router, we help can'r you. You will need to access the router and configuring PPPoE username and password.

  Call your service provider.

  Why in the world would you reset your router if you didn't know how to put in place a new or know what to do then? It's like taking something apart and not knowing how to wind again.

• Desktop computer can not detect the wireless router, even with adapter

  Hello

  I broke my laptop so I got out my old office since 2003. Its a gateway computer. There was no place where to connect my internet wire so I went out and bought a usb wireless adapter and updated my computer to Windows XP Home Edition. I put the CD and went through the Hardware Wizard. I said to her work and connected to the internet on the adapter set up the screen. BUT I can't access the internet. I tried the wizard network wireless, but sound does not detect anything either and does not work when I try to do it manually either.

  Help, please. I can't afford a new laptop close to Christmas it :(

  Hello

  • You have security software installed on the computer?

  I suggest to access the link below and follow the steps in the article to resolve the problem of connectivity wireless network on your computer and check to see if it helps you solve the problem.

  http://support.Microsoft.com/kb/870702

  You can also navigate to the link below and follow the steps in the article to set up the connection Wireless on your computer.

  http://www.Microsoft.com/windowsxp/using/networking/setup/wireless.mspx

  I hope this helps. Let us know the result.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• running the sfc, it said that I had corrupted, I found the log file, it shows 3 of files of microsoft has been corrupted it would send the file to see if you could help, now I can not find the file

  now, I can't return to sfc file to send an a was '32 \c\window\system' {}: 20 {103} 'file source tepmon in the store's also corruptedd

  Hello

  To repair the system corrupted files on the computer that was not fixed by SFC scan, an upgrade in place might have to accomplish.

  http://support.Microsoft.com/default.aspx/KB/968279
  (See option 1 in the link)
  Note: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

• vISTA can NOT DETECT THE READER of CD/DVD,

  WINDOWS VISTA cannot DETECT THE CD PLAYER, ONCE CHECK IN DEVICE MANAGER, the PROPERTIES THE SHOWS "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». How can I get the DIFFICULTY of THIS PROBLEM?

  Thank you

  Hello

  Code 39 means that the driver is corrupted or missing.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Creating Windows DVD - can not detect the DVD burner.

  When I start Windows DVD Maker, my DVD drive on my Lenovo 64 bits Y460 can not be detected. When I click the selector drop down menu on the upper right corner drive, a blank is displayed. When I try to burn, the program says that a DVD burner can not be found, sign in, and then install etc... How can I fix it?

  You have a 3G modem or another attached flash drive? My Huawei modem was somehow interfering with Windows Media Center/DVD Maker detect my DVD burner. As soon as I unplugged the problem disappeared. If I reconnected it during the burn process, it does not immediately!