Is equivalent to a DSL ethernet connection or better ethernet internet connection called DSL connection?

Is equivalent to a DSL ethernet connection or better ethernet internet connection called DSL connection?

On Saturday, 22 September 2012 17:04:18 + 0000, stuckfree wrote:

Hi Ken once again,

I'm sorry, I'm always clear that this question can reanswer again? Is not wired and not the RJ-45 connection.

What type of internet connection they call when you connect to the internet using a * connection cable *?

I'll try again and hope that you understand this time.
You connect to the internet via a modem, * not * a cable of any kind.
The modem connects to the internet in several ways; both
the most common ways are by using an RJ-11 cable (it is a standard phone
cable and is used for dial-up or DSL) or a cable TELEVISION cable
(it's just like the one you use to connect your TV if
"you have cable). This internet connection as the modem
connects to is usually a wall outlet.

You must connect to your modem. If you are the only computer on
your site to connect to the internet, you can connect directly to the
modem.
If you have two or more computers that connect to the internet, they
normally connect to a router and the modem is connected on the
router (but with some routers, the modem is built in it, so a
separate modem should not be connected). Normally, you connect to
the modem/router using an ethernet (RJ-45) cable.

Here is therefore a raw image of a default installation (the dotted lines are
cables):

Computer 1-------.
\
\---
Router - Modem - Internet (DSL, dial-up, cable TV)
Computer 2-
Note that the lines (cables) on both computers to the router are
RJ-45, but they are generally * not * the internet connection and they
are not, which makes the internet more quickly or more slowly. The internet
connection is the last dotted on the right line. From
the Modem to DSL, dial-up, or TELEVISION outlet cable (usually a wall)
socket) is the internet connection, and is the type of cable, it is
any form of internet service you have (and what outlet
"you have to the internet connection).

Ken Blake, Microsoft MVP

Tags: Windows

Similar Questions

  • Lose my ethernet internet connection when the computer goes into mode 'sleep '.

    I have a desktop with Windows Vista.  I have my internet through a cable company.  I've never had problems of connectivity for 2 years and then out of no where he would pass the signal after mode 'sleep'.  I had the cable company come out and check on all equipment and it's good that now, I'm still clueless and confused.  The connection icon have an exclamation point in a yellow triangle and say "limited connectivity" and «identify...» "and then I click on Local area connection status and make a diagnostic test that will get me connected to"network 2 "until it goes into sleep mode and then the process repeats.  It's boring say the least.  When I login and go to the LAKE State he says;

    IPv4 connectivity: Internet

    IPv6 connectivity: limited

    Media state: enabled

    Duration:

    Speed: 100.0 Mbps

    He said that the issue is resolved after each diagnostic test, but then it happens again.  I need some help pleaseeee!

    > I need some help pleaseeee!

    But you're in the wrong group! It is a problem with your network driver
    or your Windows installation. You have this repost to a suitable for Windows Vista
    Forum. It is possible that a newer driver from the network has a problem with sleep
    mode, you should try another pilot (older or newer).
    From your description, there is a problem to renew the lease of your
    DHCP server (which must be running on your router), it does not use the
    IP address assigned earlier or he does not do / IP address (which
    should be the same) we get the router. It is also possible that the
    problem is with the router or a new firmware on this subject. You should study
    These two avenues, including a replacement of the router and firmware.
    Another very simple solution is to configure your PC for a static IP number and
    leave it like that. In the forum, I mentioned, people will be able to talk to you
    through this option if you don't know how to do this.

    --
    Kai

    IEFAQ: http://iefaq.info Newsgroup: microsoft.public.de.internetexplorer

  • Ethernet/internet

    I have an imac which "falls asleep" after awhile, it is inactive. My ehternet port goes red when it does and then my wireless doesn't seem to work. I like to have my desk top hung to ethernet rather than wireless. is there a way to work around that?

    I disable the mode standby and just turn it off then when using. Nothing in the router to change.

  • BSOD - wired (ethernet) internet

    BSOD after I connect to the internet

    0 x 00000027 (0XB10A43B8, 0XB10a40B4, 0XBAAD00A3, 0 X 00040001)
    things that I have tried-
    (1) remove my software antivirus - no change
    (2) windows reinstalling (formatting) - I was able to use the internet for 8 to 10 hours, after which I had the same BSOD
    (3) something called sea tools used to check the hardware - my hard drive "passed" all tests
    4) change of network card
    (5) scans with software anti-virus, malware removal tools, in safe mode
    (6) Checkdisk
    I asked "professional" advice in my community, they said it was a fault with the cable I use. That's why I asked my ISP to investigate the matter (ongoing).

    Pramit57

    BSOD is always a combination of things can have installed something her does not work with Kaspersky.  In any case the most recent points directly to Kaspersky.

    Bugcheck 1000007E, {c0000005, 40001, af4c0c30, af4c092c}
    Probably caused by: kltdi.sys (kltdi + 1391)

    Associated with the filter of the kltdi.sys network of Kaspersky Lab

  • I just upgraded to Windows 7 Edition Home Premium for a new installation of Windows 7 Ultimate. But once it was done, I had no driver Ethernet/internet. Help?

    I don't know why, but after a clean install of it (I formatted the HARD drive which I think now is where I messed up), he had no internet. I have a wired connection to him but he tells me I have no internet driver.

    Hello

    What is the brand and model of the computer?

    Method 1:

    Check the link and try to run the troubleshooter to check if it helps.

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Method 2:

    Try to update the network drivers and check if it helps.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  • How can I connect macbook to ethernet to the United Kingdom

    How can I connect my new macbook to ethernet?

    Can not buy adapter in apple store

    Please advise me

    Apple and others sell the adopter

    ter http://www.Apple.com/shop/product/MD463LL/A/Thunderbolt-to-Gigabit-Ethernet-ADAP

    Call the Apple store first to see if they have that I stock

    For the future, n note you posted Mac Pro desktop computer forum

  • HP 550-015 a DNX DT desktop: Ethernet connection for HP 550-015 has a router Netgear Wireless D6300 desktop PC.

    I have connected an ethernet cable from my router Netgear, D6300 wireless, to my DT DNX 550-015 a newly purchased HP desktop computer and I can't get the connection work with internet access.

    When I look at the State of the network and its connections, I find that the Ethernet connection is a "unidentified public"network"and that there is" "no access to the network.

    If I make the same connection to the Netgear router to my OLD HP laptop Pavilion I immediately have an ethernet internet access.

    Why I can't access ethernet Internet on m y new desktop computer.

    Daggles

    Hi @Daggles,

    Please become a member of the HP's Support Forums. I understand that you have a problem with the wired network connection. I'll be happy to help you.

    Please follow the steps in Troubleshooting Wired Home networks (Windows 10).

    Please let me know if this information is useful to solve the problem by marking this message as 'Accept as Solution', this will help others find information easily.

  • HP g 23 010: ethernet connections

    Bought a new system in March but connected wireless. Now that I need to use an ethernet cable, it does not connect to the internet. Called ISP who says WHAT NIC is bad in the system after connecting the laptop with the same cable to internet.  Through the uninstalling, reinstalling and factory reset of the system with HP but will not distance allow them in. How I can reconfigure my system, since they don't call me back and how can I get a NIC card replaced with a guarantee?

    @techlosonmegurl


    I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display personal information (serial numbers and information).

  • Tecra S5 - slow ethernet with USB 2.0 Port Replicator

    Hello

    I have a Tecra S5 with USB 2.0 Port replicator II. I have 3 ethernet connections all together on my PC: LAN on motherboard, WiFi and the other on the USB port replicator.

    At home, I use WiFi for internet connection and USB to Ethernet to a wired connection to devices with built-in web server.

    My problem is that when the WiFi and USB to Etherenet is active the internet and the connection to the web server works but vey slow.
    If I turn off the WiFi and connect to the web server works properly.
    If I disable USB for Ethernet internet connection works correctly.

    Anyone has same problem and suggestion how to solve?
    I downloaded the latest drivers from the Toshiba support page.
    My OS is XPSP2.

    Concerning
    jballa

    Hello!

    It looks like a network configuration problem. Check the network addresses and configuration in command line with the command ipconfig/all.

    Try using static IP addresses. I think that the DHCP server takes a long time to go send an IP address to each laptop.

    Good bye

  • Satellite L645 - problem with Internet connectivity Wireless 'limited access '.

    Hi all

    I recently bought a Satellite L645 laptop, however, there is a big problem. Whenever I connect to a wireless network, it will connect in a minute, he removes the connections and said "limited access", he could return by being connected but then back with limited access, so. However, when the laptop is connected to an ethernet internet cable works. I checked and the driver is updated, it is a defective material? software? is there something I can do? Help, please...

    Thank you.

    Hello

    Here the material is ok.
    You must disable for the Wlan to save energy.
    You can do it in 7 QL power management.
    In addition, go to-WLan card-> properties > Device Manager
    You will find a named tab to save energy. You should uncheck the option here that allows the computer turn off the Wlan device to save energy.

  • Connectivity of MiFi 3G version

    A Verizon MiFi 2200 3 can be connected to a Netgear Nighthawk AC 1900 - model R7000 using a USB to Ethernet adapter in the ethernet internet port of entry? I use Windows XP and Windows 7 based operating system computers.

    Hi, NRF,.

    The R7000 does not support this type of connection. If your MiFi 3 G uses a MicroSim card, you can try to check the R7100LG.

    https://www.NETGEAR.com/support/product/R7100LG.aspx?CID=wmt_netgear_organic

    JamesGL

    The community team

  • At startup, a pop-up window appears that wants to update virus Possible backup "Cloud"? Ethernet doesn't work anymore.

    Win 7 64 professional. on Gigabit P45T-ES3G, cpu: Intel E8400, 8GiB ram, controller Ethernet Realtek 8111 / 8168B.
    Initial symptom: cannot access network - that is to say everything that is connected to the Ethernet port... System worked OK for months. Problem started
    little by little, but is now 100% failure.  Checked the TCP/IPv4 properties and is set to addr IP 192.168.1.105, subnet 255.255.255.1 gateway default 192.168.1.1 and server preferred DNS 8.8.8.8 alternate 8.8.4.4.
    Ran a LiveCD of PCLINUX 2012.2 on the machine, all the functions of the Ethernet (Internet and printers) are working perfectly, so material is OK.
    Quite recently noted a pop-up "Cloud Backup" start-up that wants to send some kind of so-called information backup somewhere.
    I can post a screenshot (png file), if I was told how to.  (I have the screen shot, I downloaded on a USB - stick, and)
    can send this computer). The context menu offers a "Cancel" button I choose always.
    I went to msconfig and two programs found "backup" in their names: NTI BackupNow EZ and EasUS Todo backup Applications
    and not both, but the popup still appears at startup.  I can't find anything in the Remove Programs list that looks at it could be this.
    I ran Microsoft Security Analyzer and MS malicious software removal tool, and both are nothing after full several sweeps of the hour.
    I also have AVG and CCleaner, which do not complain either. Any other symptom: I think that the starting time is excessive.

    I would be EXTREMELY reluctant to reinstall Windows, I have some paid programs, but also a fee which has been rather difficult to install
    due to its Protocol of security installation.

    Hi Doug,.

    first of all, be careful with this clearner. I wouldn't recommend them at all. At best they delete files you want to join, at worst they are doing bad things in your registry!

    Pass, you can have a few ongoing struggles (at least the potential for it) with AVG and MSE... I would recommend Malware Bytes anti-malware detection.

    You are probably right to be curious, I don't know why 'cloud' would need backup.

    Can you connect in safe mode?

    Try this troubleshooting and let us know what happens:

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    B Eddie

  • Calculation Manager site launch connect to 11.1.2.4

    I am actually looking for the equivalent newspaper to launch HBR connect 11.1.2.1 which shows ask what time of execution have been entered, how long the rule Manager calc took etc.

    I tried looking for that but the locations do not match:

    Location of the log of the calculation Manager?

    File vacuum calcmgrlaunch.log

    Note, I'm trying this for a HBR Essbase not planning.

    I don't know there's an equivalent for essbase, rules are executed directly on essbase, so probably the essbase application log

    See you soon

    John

  • Taking JDBC connection configuration supported the RAC in Oracle SQL Developer?

    How can one Oracle SQL Developer be configured to successfully connect to a [Oracle RAC | http://en.wikipedia.org/wiki/Oracle_RAC] environment, that is, not only the installation program always to connect to one of the individual nodes?

    [http://programmersjournal.blogspot.com/2008/08/jdbc-connection-string-for-oracle-rac.html] is an example of a classic and taking version supported the equivalent CARS of a JDBC connection string. I've used a CAR of the same format connection string from within Java applications custom without problem. I thought that the same thing should be configurable in Oracle SQL Developer, by setting the 'Connection Type' drop-down menu on "Advanced", then enter the connection string JDBC RAC-aware as "Custom URL JDBC". However, after the test connection, the following error message is displayed at the bottom of the dialog box:

    Status: Failure-Test failed: IO exception: NL Exception has been generated

    There is no additional information shown on the display 'Page Logging'. With the help of Oracle SQL Developer 1.5.5.

    Thank you!

    You could always give the current 2.1 ai2 test... continuous development may have fixed the issues in this area...

    Hope that helps,
    K.

  • How good my connection to video call?

    Hello

    I have a bad internet connection because of high costs and other things, anyway...

    Is this enough for a good video call?

    It's the same connection that uses the other party

    I don't think you can expect good quality with these specifications of Internet video calls. Especially the very low download speed is the limiting factor.

Maybe you are looking for