Is fallen from MacBook Pro, light flashes three times, won't start

HHello, fell of my MacBook Pro 2011, about two feet on the ground, there is no external damage.  Front light flashes three times and will not start.  Tried holding button, smc, pram.   Have been reading about the RAM.  Maybe it's in bulk, hope that's it, that is.  Don't have the tools (unibody).  Any ideas, help?  Thank you

Advertisement

CCan really turn on and off with power button flashing light / stop.  And can hear the click (assuming it's the disc) turn off.

Tags: Notebooks

Similar Questions

  • Yoga: S1 ThinkPad won't start, only the light flashes three times.

    So I just bought a refurbished Thinkpad Yoga and everything was great for a little while. So I decided to stop it and put it aside for a few minutes. After coming back, he now refuses to even POST. I tried each power cycle I could think of, in various combinations and traveled several forums. At the end of the day, I have no functional solution.

    Current situation:

    System responds in any way other that 'i' (in the Thinkpad logo) light flashes three times when the charger is connected, or even when you press the reset button while the charger is plugged. Another illicits nothing any kind of beep, light, or otherwise.

    Any help is greatly appreciated. Thank you and best regards.

    I have the feeling that you had opened the back cover of tinkering with components (whether a change of SSD or the modem 3g / 4g).

    the symptoms you described sounds exactly like a cut cable MB. You can try opening the hood back and on the left side, you will see a wire labeled "MB". tighten, and the computer should fit now.

  • Laptop does not - the power adapter light flashes three times? G62 b29SA

    I was replacing the fan in my friend's laptop computer. I had a problem with the trackpad works not once I put back it together and this problem is not yet solved, but I have another problem that prevents me from getting more. Now when I press the button, the light power adapter (next to the socket for external power) flashes three times and that's it. It flashes three times, whenever I press the power button. It does this even with a connected external power supply (I'm sure it's supposed to just stay on constantly when the charger is plugged in but the power source I have is a universal set of one to 19 V - he was fed up with this trendy before but I don't know if it was taken in charge of it). Any advice?

    I have the charger of my friend and now it starts very well. There seems to be a lot of sense for the three flashes based on my Internet research, but in this case, it seems that it is a way to indicate a low battery.

  • MacBook pro has frozen three times in one day

    I currently own the MacBook Pro (retina, 13 inches, early 2015) with OS X El Capitan worm young 10.11.4, about 2 months. It has frozen 3 times today, which means I had to force reboot it three times as well. When it freezes, the keyboard and the trackpad unresponsive, so I only rely on the power button. On facebook, I've been the first couple of times that my laptop froze. The last was while watching anime. Why what is happening?

    After the reboot, a pop-up message indicates that "your laptop off due to a problem" or something. But he asks me if I want to reopen the pages I just last visited before stopping, he said what was the problem in the first place.

    • Note the time of the next frost. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of freezing. Suspicious message here.

    Search before the journal entry that begins with BOOT_TIME since it is the first line of a startup

  • 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

    13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

    This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  • Why does the iTunes on my macbook pro light when my Apple TV turns on.

    Why does the iTunes on my macbook pro light when my Apple TV turns on.

    No idea, mine isn't and I'm reasonably sure he shouldn't, I wonder if I'm not wrong understand what you mean, please specify exactly what is happening.

  • My new Macbook Pro backup in a time Capsule with 2 iMacs. After the first incremental backup but backup every now and again he returned to the backup of the entire drive, why is - this

    My new Macbook Pro backup in a time capsule, as well as 2 iMacs. After the initial backup, it seemed incremental backup but from time to time, he performs a full backup why, is it?

    time to time, she performs a full backup

    What evidence are you using to decide that she performs a full backup?

  • MacBook pro takes more than a minute to start

    My Macbook Pro takes more than a minute to start. I though it was normal, but I've seen Macbook Pro my friend and it only takes 15 seconds to start. How to improve the startup time of my Macbook?

    Replace HDD SSD may speed up OS boot as well as launch Applications.

  • I just got a MacBook Pro renovated Friday. It won't turn on and continues to beep.  What could this be? He was working.

    I just got a MacBook Pro renovated Friday. It won't turn on and continues to beep.  What could this be? He was working.

    The number of beeps

  • I have a MacBook Pro late 2015, every time I have out of mode 'sleep' it is frozen and I turn it works.  Anyone know why this is happening?

    I have a MacBook Pro late 2015, every time I have out of mode 'sleep' it is frozen and I turn it works.  Anyone know why this is happening?

    Contact Apple for support and service

  • Red LED light flashes 3 times, two sec pause and so on

    I have a Dx5150 MT, Windows XP with this problem:

    Red LED light flashes 3 times, two sec pause and so on.

    According to http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00868914&lang=en&cc=us&taskI...

    Reinstall the processor, but the problem persists.

    Solved by removing the battery.

    georgopgr wrote:

    I have a Dx5150 MT, Windows XP with this problem:

    Red LED light flashes 3 times, two sec pause and so on.

    According to http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00868914&lang=en&cc=us&taskId=&prodSeriesId=447468&prodTypeId=12454

    Reinstall the processor, but the problem persists.

  • Cannot print or scan from MacBook Pro to Officejet 6500 E709n after Firmware upgrade

    I have-

    MacBook Pro; OS X 10.5.8

    JO HP 6500 E709n: Firmware RBP1FN0935AR connected by Ethernet to my network.

    Also several XP and Vista machines machine.

    I have most of my printing and scanning of MBP.  I've updated the firmware the week last version (above) found under the XP software and drivers for this printer.  I thought more recent firmware is always better.  In any case, after that, I can no longer print or scan from the MBP.  I've uninstalled and reinstalled the software on my MBP 2 times.  And I followed the instructions on this forum for posts with similar problems.

    I can see the printer in the Systerm preferences > Print & Fax.  He is registered and has a green light.  I can navigate to the printer and connect.  I can not state of ink.

    BUT when I run the Setup Wizard, the printer is not listed in the window "select the device".

    When I do 'add devices by IP' and enter the IP, I get a message saying that it could not connect to the printer.

    I can print from my XP and Vista machines.  The XP machine is a virtual machine on VMWare Fusion on my MBP.  So I now transfer that I want to print my XP VM just to print it.  Is NOT IDEAL, but that market.  Hoping to solve this problem.

    1. I try to downgrade the firmware to the previous version.  Is anyway to do this?  How can I get the previous version of firmware?

    2. I would like to know what ports are used to connect to the printer?  If anyone can let me know, I'll see if my MBP has those blocked or not.

    3. If anyone can offer a solution, I would appreciated it.

    OK, I finally found this thing.  What happened was that my wireless connection does not (for reasons unknown at this point) my Mac to connect to the printer.  Even if I can get to the Web page.  Hello may not cross.

    Anyway, on a whim, I disabled the airport and used an ethernet cable to connect to the same switch the 6500 was conducting and reinstalled the software.  And whaddaya know.  I was able to install the printer, then did a scan and printing and a jig around the room.

    I disconnected the cable and turn on the wireless connection, once again, and wouldn't you know, HP Scan Pro can not connect to the 6500.  Is returned to the thread and it works.  Hmmm.

    I am due for an in new wireless access point.  The DLink and my Verizon FIOS Actiontec router sometimes do strange things.

    I'll still give you, PrintDoc, 1 kudo for loans to help.  And the uninstalling of 3 keys; It was new to me.

    I may be the only one who has never fallen on this, but it may be useful to say, do NOT take your connection Wireless for granted.  Always test everything.

    Thank you

  • Can anyone recommend a good for a MacBook Pro USB flash drive?

    I have just implemented a new of the retina end 2015 13 "MacBook Pro and you are looking for a 128 GB + good for fast backups flash drive while looking around a hard drive for use with Time Machine or SuperDuper.

    I'm particularly interested in: (1) A flash drive that is pre-formatted for a platform of Mac OS X for recent models. (Couldn't find it from what I saw on Amazon.)  (2) I believe that the current MacBook Pro USB 3.0, but yet there seems to be a lot of disc memory flash USB 2.0 autour.  Anyone found a good 3.0 flash drive Mac compatible in size 128 - or 200 GB? (3) If you happen to have one, it would be swell to find a drive lean enough to fit comfortably in a port USB of the MacBook, even if something is next to him.

    Thanks - much appreciated suggestions!

    You can format external hard drive for Mac OS X with disk utility.

    https://eShop.MacSales.com/shop/external-storage?_ga=1.101579265.1412082564.1442 729407

  • U2415, MacBook Pro retina, flashing or unavailable video

    Hello

    I have a MacBook Pro of the retina (end of 2013). My company bought a Dell Ultrasharp U2415 for me. I unpacked yesterday, plugged, used for about 2 hours, then the video started to blink.

    The flashes are the same as those described in the post of this Forum of Support from Dell and see in this youtube video. I've attached a video of my actual flashing monitor.

    This morning, I came, only connected to the external monitor (literally the only device plugged other than the power adapter), and started working. I have 5 minutes of solid video before the flashing began. I tried reseating the cable mini display to end the monitor and the laptop and now the screen gives an error message "No. DP Cable.

    I tried restarting the computer and using a different cable; no attempt to solve the problem.  Is there a solution to this problem?

    Thank you.

    Fix. We do not know what problems you may face. The only Dell monitor we validated on Apple was the UP2715K. You should ask users to Apple here. If there is no specific fixes Apple / workaround solution, they need to know.

  • Spots on the screen from macbook pro 13 early 2015

    I am from Nepal and bought Macbook pro 13 Futureworld last year. I noticed stains and spots on Macbook pro early 2015. Its the apple care warranty. I would like to know if it is covered by the apple care warranty or not. With this question, I also think questions of wifi signal that falls and has bad reception. Windows 10 Hp431 works very well, Iphone5 too connects well to the router and on speedtest shows better resistance than that of the macbook pro 13.

    Best regards

    Rajesh

    This will be of interest to you: http://www.staingate.org

Maybe you are looking for