Is G62 (b31ee) of HP can contain up to 8GB + RAM?

Hello HP

I want to upgrade RAM from my HP G62-b31EE of 2 GB to 8 GB? Is it Possible?

Based on your website.

It may contain up to 4GB.

But I use the Crucial System Scanner.

Is say. It can hold up to 8 GB.

and the last Question in my mind, "" what will happen if I try to use 8 GB of RAM?".

Thank you...

* Sorry for my English

Hello:

There are a few errors on the repair and product specifications page.

As you have seen the product page indicates that the maximum memory is 4 GB.

This is false.

Chapter 1, page 1 of the manual link, service below indicates the maximum memory is 8 GB.

On the page, 2 they list only configurations of memory up to 2 x 2 GB.

It's incomplete.

You could also install a chip 4 GB + 2 GB to 6 GB and a 4 + 4 GB to 8 GB.

So Crucial is correct and the maintenance manual is correct - the owner's manual is incomplete.

http://h10032.www1.HP.com/CTG/manual/c02542102.PDF

Tags: Notebooks

Similar Questions

  • Please help - I don't understand this: because iPad can contain only the content of five Apple ID.

    I give my son my iPad.

    I try to download Apps on it and I get the message: some of the files in the iTunes Store iTunes library were not copied to the iPad because iPad can contain only the content of five Apple ID.

    As far as I know there are only 2 Apple ID involved - my own and the one we did for him as a minor.

    If someone has had this problem and can you help me to overcome.

    It is typical that this situation happens the day before her birthday - I wanted to give him tomorrow all loaded with his own stuff. It five of its apps accepted last month when I first came with the idea and now...

    Anyone?

    This means what it means: iTunes Store items are tagged with the Apple that was used to buy ID. Apparently in this case, for some reason, over 5 ID are involved. Which could include accounts that are no longer used.

    In general, it is best to follow these steps before giving your iPad to someone else: what to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

  • G62-b31EE: HP G62-b31EE KEYBOARD

    Please, a REAL HP Pavilion DV6 3000 portable 606745-171 may works with HP G62-b31EE?
    I NOTE THAT IT HAS THE SAME EXTERNAL APPEARANCE AND LOCATIONS OF BUTTONS.

    Thank you

    Here's the manual. See p. 18. All keyboard reference numbers 605922-xxx. The keyboard that you request will not work.

    Manual

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • HP G62-b31EE

    Hello

    I have a laptop HP G62-b31EE, and I put 2 GB RAM to 4 GB or more.

    I found a lot of RAM available oninle for shopping.

    My question is how to select the ship suitable for my laptop?

    Thank you

    Okay, that's exactly the right stuff.

  • Maximum number of files that a folder can contain

    Title says it all. What is the practical limit to the number of files that can contain a single folder? These would all be tiny files, usually less than 20K, I'm looking for emotional limit of Windows, rather than the clear disk space limit.

    This is on WinXP SP3 and these files would be created in Word.

    Thanks for any idea.

    I think that with Win7, 20,000 of handling should not be a problem.  Depending on how you access them (such as manually via file |) Open who needs time to load all files to choose among them) it will be slow, but even XP that will handle a lot, even though it may be slower.

    Steve

  • TreeFields can contain Images?

    Hi all

    I wanted to know if TreeFields can contain Images... ? As in, on Expansion, there should appear a picture., is this possible?

    Or any other class that provides similar functionality?

    Thank you

    Suhas

    You can certainly draw a picture in a row of TreeField, just as you can with a ListField. Implement you this in your TreeFieldCallback.drawTreeItem () method. There are a lot of discussions on this operation with a ListField. Search the Forum - the techniques also apply to a TreeField.

    But a TreeField has the same limits as a ListField: all rows must have the same height. I suspect that may exclude using a TreeField for what you want to do.

    [Edit: I see that by writing this, you understand the first part already.]

  • 4.0EA1 - connection name can contain only alphanumeric... why?

    I just encountered this error, which is apparently design:

    Connection name can contain only alphanumeric characters, the underscore (_) and hyphen (-).

    I found this post on the forum, but was a little depressed that I never use login names are now disabled... and as I had to change one of them, I need now to change my entire naming system:

    Restriction of SQL Developer 3.2.1 patch connection name

    Exclusion of character list may or may not vary by operating system, and, roughly speaking, will probably contain...

    <:/\|?*()%&'$@^~#"> {code} 

    Can we reconsider a return to how it used to be for 4.0EA2?  I use various constructs to ensure an appropriate message is carried with the connection everywhere it goes:


    # ATTENTION #-Production


    Now I need to come up with a new naming system... <sigh>


    Greg.

    Why - I don't know there is anything that we can say that will make you happy here, but change has been to examine a few bugs of low level framework.

    You can keep your old login names. As a solution, just manually change connections with SQL Developer XML file closed.

  • I'm setting up a website, but I have a problem: I need a scrolling text box that can contain images and text please help?

    I create a flash site, but I need a text box or something else that can contain text and images. Help, please?

    You can use a scrollpane component. Simply create a movieclip with some content you want scrolling, set the ID of this movieclip binding and set the contentPath of the scollpane to this connection ID.

  • An Atom CPU N270 @ 1.60 can support 4 GB of RAM?

    An Atom CPU N270 @ 1.60 GHz can support 4 GB of RAM?

    Hello

    Please follow
    Thank you
  • Can the amount of memory/RAM I put in my HP Compaq 8710p running Windows 7 64 bit?

    Can the amount of memory/RAM I put in my HP Compaq 8710p running Windows 7 64 bit?

    The value maximum support is 8 GB.

    The Guide to maintenance and Service for the Compaq 8710p

  • Win2k3 x 32 Enterprise can use 4 GB of RAM on Xeon / Opteron with 16 GB of RAM installed

    Hello

    I installed a Windows Business Server x 32 on ESX 2.5 on an Opteron Dual Core System. The virtual machine has 8 GB of RAM.

    It must be converted into ESX 3.x (all Versions) and migrate to CPU Xeon (Quad Core). The virtual host Xeon machine, see only 4 GB of RAM on the Task Manager. Migration to host Opteron with ESX 3.5 and I can take 16 GB of RAM. VMWare Infrastructure Client shows the total RAM (8 / 16GB)

    Remove the virtual computer and only use the drive hard have no change on the RAM. I see only 4 GB on Xeon system.

    You have an idea?

    Thank you very much

    Patric

    Hello

    I have to assume that you use the physical address Extension (PAE) to access memory outside the limit of 4 GB. To ensure that the 2003 Enterprise Edition as a Standard Edition version see only 4 GB.

    Check the boot.ini for the PAE parameter If it is not present then use the BCDEdit/set tool to allow it. For more details, see http://msdn.microsoft.com/en-us/library/aa906211.aspx

    Change of type of CPU is a possible reason for the deletion of option EAP, I suspect that this could be a problem because allow EAP must also the other interdependancies of CPU hardware that can cause stability problems if the OS is expecting a specific set of features CPU.

    It doesn't matter that I expect that allow EAP with the BCDEdit tool will probably fix the issue.

    Good luck.

    Kind regards

    Mike

    http://blog.laspina.ca/

  • iPhone can contain only the content of five Apple ID

    Since the update my iOS 9.1 and iTunes 12.3.1.23, I get this error "Some of the iTunes Store in the iTunes files library have been copied to the iPhone"iPhone"because that the iPhone can only contain the content of five Apple ID". We have only 2 accounts (only one ID of each) in the music of sharing domestic, and I bought my 5 new iPhone when it came out. Is this a bug? Why it does not list the files that have not been transferred as when it cannot find a file or it is inappropriate for the iOS format so I can study questions?

    I had the same problem, try to synchronize a new 6 iPhone more. Some applications will be synchronized, others not.

    After carefully removing and adding apps one by one, the "Remote" app Apple throws this error. It will not install. Incredibly frustrating.

    I only install the apps I bought (my wife bought 3 that we use more). FYI to check this, go to my applications, make right click on an application, choose information, click on the file tab, and you can see who has been sold.

    iPhone 6 s more, iOS 9.2, OS x 10.9.5, iTunes 12.3.2.35

  • How many documents can contain 50 GB of storage iCloud?

    I think to upgrade my storage iCloud to plan.99 $50 GB and I was wondering how many documents (Pages, Numbers, Keynote, Word, Exel, Powerpoint) that will contain.  I tried Bing and Google to get the answer, but so far they have been no help.  I would like to just a detroit direct answer to my question.  If someone could help me with this I would be very happy, thank you.

    Unfortunately this is not something that can be easily or accurately answered, as the number of documents, you can place in the 50 GB would be directly related to the file size of the combined documents.   Its like asking how many pounds you can put in a box of some dimensions? Well its going to depend on the size of the books.

    If you have documents, what size of file is about 5 MB (megabytes) you could probably get about 10 000 these documents in 50 GB. But if you have files of 10 MB (presentations, large spreadsheets etc...)  Then you would be able to adapt the 5 000 files instead.

    Keynote and PowerPoint presentations are usually larger than text documents.

  • HP G62 371DX: help! Can not perform the system recovery

    HP G62-371DX
    A few months ago that my HP laptop was very slow, then crashed. I have factory reinstall using disks that I have ordered or purchased from HP. It was a time of recovery the first successful I used the recovery disks and after days of updates of the VICTORY, even was running Win 10, without a hiccup. Then, I received a few messages on the hard disk health and prominent failure. I decided to upgrade the laptop by buying a new battery and a HARD drive. When I tried to use system recovery discs to reinstall Windows 7 to factory State, it failed with an error:

    Copy the file fails
    From: F: \PRELOAD\BASE11. WIM
    TO: C: \RM\IMAGE| COMMODITIES11. WIM
    PRESS OK TO RETRY

    "" He then reloads the "Windows prepares your computer for first use" MORE AND MORE. Could there be something wrong with the recovery discs?

    99girl

    Hello

    You can try to see if the problem is with the recovery disks, would be to see if you can perform a new installation of Windows 10.

    As you mention that you recently update from Windows 7 to Windows 10, a hardware profile on your machine will be recorded by the activation servers

    Therefore, as long as the previous installation of Windows 10 had activated Ok after the upgrade to Windows 7, you can simply create the 10 Windows media on another PC and then perform a new installation as described in the guide on the following link.

    Note: On the activation screen, select "I don't have a product key" - Windows will activate automatically once installation is complete.

    http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

    Kind regards

    DP - K

  • RAM 2 gb 10600 s will work well with 2 GB 8500 s ram in computer hp laptop g62, please answer? can I install both

    I have hp g62 laptop with 2 gb 10600 s ram installed, I have an another 2 gb ram 8500 s, I can install them both in the laptop? they will work very well or they will conflict because of the difference between s and 8500 10600 s?

    Hello:

    They should work fine, but the memory will operate at slow speed of 8500.

    Paul

Maybe you are looking for

  • Firefox cannot load Web .xml page, but IE it loads OK

    When I try to access this Web site in Internet Explorer, it works fine, but in Firefox, I get the following error message:In the unlikely event that you are reading this instead of see the structures of files, as expected, it means that your browser

  • What happened to my bookmarks toolbar?

    I've just updated Firefox to version 15.0 on Mac. Suddenly, all my bookmark folders that are supposed to be in my Bookmarks Toolbar are gone, and the toolbar doesn't let me put it out there. It is substantially not optimal. I must say, I'm becoming l

  • Satellite A45 - the CPU usage is high and slow applications

    Hi all I'm trying to debug a hardware problem on my Toshiba Satellite A45. I am running Ubuntu 10.04, but I don't think that it's operating system or related software. THE PROBLEM: The CPU usage is high and applications slowly to a crawl after using

  • Caps Lock message appears - how to disable?

    Hello I was recently passed away and back found that by pressing the Caps Lock (or even the keys to scroll or num locks) sees a message pop up in the right corner of the screen to tell me that they are we / off. (see related photo) http://i49.Photobu

  • TCP - LabVIEW (Client) to Arduino (server)

    Hello LabVIEW community.  I had considered this ad in the Arduino community, but I thought that LabVIEW community most likely to know the answer.  Sure... copy paste really not difficult.  in any case...I am wanting to create a VI that will allow me