Is impossible to turn on the guest account. Cannot create new user account. "The service user profile Service has no logon. User profile cannot be loaded. »
Is impossible to turn on the guest account. Cannot create new user account. After to try one of those and reboot, the icons of account appear, but when you try to use, the following instructions of error present when you try to log in with the new account or comments: "the user profile Service service has no logon. User profile cannot be loaded. "I looked at the answers to all the previous ones (including the KB947215) and no not to address specifically. For the most part, they seem to assume that there is a guest or a new profile in the first place...
The system is Win 7 Pro 64-bit with all available updates. I can't say when the last time that the guest account has worked (rarely used) and just found out I can't do new additional user, accounts trying to solve the problem of account of comments... so I have not tried to enter Safe Mode and do a system restore , because I can't yet identify a useful restore point...
There are no entries in the registry for a guest or a new standard user account. The registry entries for the three accounts normal-quickly (2 x admin, 1 x level) seem to be appropriate. Watch register computer/HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
S-1-5-18 = system profile
19 = local service,
20 = network service,
21 long numbers + 1004 plus User1 (admin),
22 long + 1005 plus 2 user (admin),
23 plus long + 1006 is user3 (standard,
and no comments or additional profiles appear.
C:\Users includes
All users,
User1,
User3,
By default,.
Default user (which is inaccessible for me, even as an administrator),
Public,
User2,
No guest or additional profile appear.
All except the default user (I can't open) seem to have the appropriate, NTUser.DAT files although I don't know how to check for corruption. Having both a default value
and a default user folder seems hokey.
I think I understand instructions how to fix or remove a corrupted profile, but that does not apply to the guest account or profiles that do not exist.
Help? Ideas?
This message contains the strange solution.
[Plan B - I found one thread where one user said that the same symptoms of the problem that you experience this problem solved]
- - - - - - - - - - -
Plan h - while another user said that it was caused by a file Windows Live problem
This is the thread I can not create a new user account (Windows 7): the user profile service service doesn't have the logon
You find it difficult to follow the thread as it's long and reported problem by different people to confuse it and there is also a bit of bickering [long filaments often end up being quite incomprehensible].
..., See references to the event viewer in the middle of page 4 and Windows Live we [at the bottom of page 2 more on page 3].
I see not the logic of the any of those things, but if one of them do things long enough that you are trying to create new accounts that works, you will know how in the future until a proper solution is found.
This is the useful part where this user has tested the solutions proposed in this thread linked above: -.
This has proved to contain leads to a difficulty. Have to admit, when I read everything the first time, several days, I did indeed find it confusing and even the parts that I "heard" (sorta) does not appear to be related to my symptoms.
It turns out that the answer of JDMICHAL May 17, 2011 contained this:
(1) C:\Users\Default\AppData\Local\Microsoft\Windows open live
(2) this directory has two subdirectories with a single file of each. Go into each directory and apply the following:
(a) make a right click on the file, open the properties.
(b) click the Security tab.
(c) it will issue a message: "to continue, you must be an administrative user with permission to view this object's security properties. Would continue you? ». Click on the button continue.
(d) click on the Add button...
(e) ' everyone' type in the box at the bottom of the dialog box. Click on "check names"; It should be emphasized the "everyone". Click OK.
(f) ensure that the new "Everyone" entry "read" and "read & run" check under the column "allow".
After doing this for two files, attempt to connect to the account. He must undergo.
The procedure (bascially) worked... Although the different answers on my system differed slightly along the way (perhaps due to the slightly different versions of Win 7?, because I was already logged in as an administrator?).
In any case, "Everyone" with the read and read/execute permissions adding to these two files seems to have done the trick:
C:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\Bici1_00.sqm
and
C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm
Thank you for leading me to this!
Tags: Windows
Similar Questions
-
Our plant manager just got a new PC and I've set up with Windows 7. I can log on fine using my user account. But when it tries to connect, it receives the "the user profile service has no logon. Error could not load the user profile. It can connect to other computers fine, Windows XP & Windows 7 computers. It's just that a laptop could not connect to.
It was a VIP user. He's my boss of bosses bosses if you know what I mean. What I can do. I tried "patches" for the mistake that I found online, but none of them helped.Help me! Please, I beg you!I did other tests just now and I seemed to have found a "solution". Here are the steps:
1 Add the user to the local Administrators group2 log in as a user3. close the user session4 log in as network administrator / local5 remove the user from the Administrators group6 log in as user7. the success!Still do not understand what was going on the devil, but at least I know the work around her now! -
After the movement of virtual machines in VmWare Server 2 for ESX 4i, I get this error when you try to start the virtual machine:
Impossible to turn on the virtual machine with the following error: could not open the disc
"/ path/to/vmdk-0001.vmdk" or one of the Flash disk it depends on.
Reason: Broken pipe.
Anyone's idea what is the problem here?
How did you move virtual machines?
Did you use the converter (https://www.vmware.com/tryvmware/?p=converter)
Otherwise try converter
-
The error message reads "the user profile Service service has no logon.
User profile cannot be loaded.
Thanks have tried but can't boot from a fix it for me or set me.
Go to Safe Mode with networking
Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Mode safe mode with networkingYou can log into your own account in safe mode?
If so, you remember the date when you did NOT have this problem?
If so, this date no more than 10 to 15 days ago?
If so, again, please do a restore of the system in safe mode.How to restore the system:
Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
To sit and wait. The machine restarts when it's done.Once completed, restart your machine and see if you can log in to your account in NORMAL mode.
For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
I tried to create a new user account, but I get the following error when I try to open a session with him:
the user profile service service has no logon
Until I leave than anything more I will add that I activated the hidden administrator account and this is the account I use to create a new standard user account.
Most of the patches for this issue are due to the fact that delete manually a user account does not remove the registry key that are associated, and you are required to go to the next section of the registry:
HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\WINDOWS NT\CURRENTVERSION\PROFILELIST
and delete the key associated with the user account to be deleted.
This fix IS NOT help, because whenever I try to create a new user, Windows doesn't bother creating a registry key to the new user. The new user account appears in the account management window. If I right click ondesktop and select Properties, then the settings , select the Advanced tab and click settingsunder USER PROFILES, the new account appears not here no more.
It is a huge problem. I have other people who use this laptop and I don't want to use my login information, or the guest account. I'm not editing the registry just to make a new account.
Please tell me there is a fix for this that works. Windows 7 was not free, and this kind of problem is very frustrating for the premium software.
Thanks - this is the only tip that help me to find the solution to this problem.
Two files in the folder C:\Users\Default\AppData\Local\Microsoft\Windows Live could not be copied without administrator privileges. This caused the connection in the attempt fail for all newly created user accounts. The files are:
C:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\Bici1_00.sqm
and
C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm
I've added the read permission for all users in these two files and retried the logon. The opening of session proceeded set up initial user and filled perfectly. Probably, this problem started when I installed Windows Live Messenger which is the only Windows Live application, I installed.
Other important in your message board was to check the event log which stressed the two files which could not copy. Otherwise provided in WARNING messages immediately preceded files event log error message indicates that the profile service could not connect.
-
Hi guys,.
(I already tried this https://support.microsoft.com/en-us/kb/947215)
I have usually need two accounts on my system. I lent my laptop to a friend for a few hours and asked him to connect with the guest account but he got "the user profile service has no logon. User profile could not be loaded"error message. So I tried to create new accounts (standard and administrator), but nothing works. I am able to connect to my account but not to other accounts, I have create on my system. Pls help
OS: Windows 7 Home Premium
Hello Shashank,
Thanks for posting your query on the Microsoft Community.
I imagine the inconvenience that you are experiencing and I appreciate your efforts taken to solve the problem.
I suggest you refer to the suggestion of Nithyananda J replied on February 15, 2010 and check if that helps:
Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How to back up and restore the registry in Windows
Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.
Thank you
-
Original title: I can't connect to my admin account
Windows 7 - whenever I try to login on my admin acc it appears ("service user profile Service does not have the logon - user profile cannot be loaded") and do not know what that could have been and how to solve this problem, I have not tried anything yet if someone can please help me. I also connect to a standard ACC and cannot do anything because when he asks me my admin pass I put it in and nothing happens.Hello
This error can occur if the group policy setting "do not connect to users with temporary profiles" is configured.
Run the diagnostic tool for Fixit for the article mentioned below and if it solves the problem.
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon.
Unable to load the user profile.
http://support.Microsoft.com/kb/947215Let me know if you need more assistance.
Kind regards
Afzal Taher-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Having only one administrator user account. All my other user accounts will get the above message. Help, please.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
Not able to connect to the user account, error: user profile Service has no logon
I'm on a HP Pavilion dv7 with Windows 7. I created a user account for my wife but she cannot open a session because of the messages "the user profile Service has no logon. User profile cannot be loaded. »
Where and how can I fix it?
Thank you.
Larry
Original title: need help with setting up an account
Hi Larry,
Thanks for posting your query in Microsoft Community.From your description, it seems that you are not able to connect to the user account when you try to connect you get following error. The user profile Service has no logon
This behavior can occur if the user profile was deleted manually using the command prompt or by using Windows Explorer. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry.
If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.
To resolve the problem with the user account, you can follow these steps:
Method 1:
(a) click Start, type regedit in the start search box, and then press ENTER.
(b) search for, and then expand the following registry subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList(c) right click the SID that you want to remove, and then click on remove.
(d) log on to the computer and create a new profile.
You can also check this link:
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215Important: The above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
Method 2: Also, see the steps in the following Microsoft article:
(a) error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215Note: We strongly advise against making it the standard way to remove the user profiles on computers. Documented and supported approach is using the system advanced settings in the system, "Profiles" settings properties For programs, it is available using the API 'delete profile '.
If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.
(b) how to back up and restore the registry in Windows
Back up the registry
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry(c) IF you still have the problem then you can follow the link provided below to fix the damaged user profile.
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profileFor any Windows help in the future, feel free to contact us and we will be happy to help you.
-
I created a new Admin account and when I went to her, I got the message:
"The service user profile Service has no logon. The user profile Service failed to load.
What's up with that?
Hello
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
(or two with the same password) use a test or fix the other.You can run the Admin account hidden from the prompt by if necessary.
How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Good people you've heard of this one before:
I can connect to my basic admin account, but not others. I tried to create new user accounts after you delete the old user accounts but system would not apparently carry out process. I get the following warning:
Service user profile Service failed to connect
User profile cannot be loaded.I tried all of the recommended patches (see list below)
1 ran all appropriate steps as stated in the article: http://support.microsoft.com/kb/947215 - no joy
There is not other profiles listed in the register except the administrator account on the basis and since I couldn't connect successfully to a user apparently newly created accounts, the profile has not completed the process of generation.2. I have not ran the SFC system - no joy. He replied with the following: Windows Resource Protection did not find any breach of integrity.
Then... of other big ideas?
Oh
Running Win 7 with all latest updates (login problem is not a new problem according to my children - I just got back from the extended learning this persistent problem)
I am on an Intel machine running dual quad core which is only 6 months old.
I run MS Office 2010Hello
I suggest you to consult the steps mentioned in the link and check if it helps.
Hope this information is useful.
-
Original title: deleted Vista ultima. admin identity and admin authorization password for standard users will not work.
I inadvertently deleted the admin. identity, I think in Vista Ultima. The photo shows still on the identities, but when I try to open the identity I get the following message, "user profile service service has no logon. User profile cannot be loaded. The admin. password does not work in any of the other identities now, so I can't do updates to most of my programs, such as windows. I can't open the control panel to add and change of identity.
Hi JBRA47,
You can consult the following Microsoft KB article and check if it helps to solve the problem:
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I CAN NOT LOG - ON
I AM THE ADMIN, BUT I CAN NOT CONNECT ON THE ERROR MESSAGE IS - THE USER PROFILE SERVICE HAS NO OPENING SESSION IMPOSSIBLE TO LOAD THE USER PROFILE... HOW CAN I FIX?
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
I use Vista Home Premium
- Windows automatically updated and turn off the power.
- I couldn't connect, it says that the service user profile service does not logon. User profile cannot be loaded.
- Then I deleted my user profile in SafeMode by doing: 'make right click on computer - properties - settings - advanced - user - deleted my old account profile settings '. There is no option for me to "keep my files."
- Then I managed to connect, I guess having creates a default user account? Because there is a new folder in C:\Users\, called (former name). (old name) - PC. In C:\Users\(old name), it is empty.
Now, all my original files are gone because I deleted my old user profile. The size of my c: drive-has not changed much, so I guess all my files are still in only my computer, it's just that I can't find their "PATH". How could I get re-navigate to all my files? I need them so badly.
Thank you very much for the one who can help me.
Hello
Log on as ADMIN and look in C:\Users where C: is the drive where the user folders.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.
Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google
Earth) has been known to cause this problem.How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
(or two with the same password) use a test or fix the other.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
The above message appears when I try to log in. He only started past today, for no apparent reason. I can access a different account on my computer, but that information is stored on my own connection. The administrator so I cannot get a more far by creating other accounts etc, (which would not have the info I need anyway). Help... I work from home so it's impossible to get anything done. Thank you.
Hello suestev,
Thanks for posting your question on the Microsoft answers Forum.
Please see the Microsoft KB article below for assistance with the error:
KB 947215 - error message when you log on a Windows Vista-based computer by using a temporary profile:
"The user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215I have included several links that addresses the error message for the user profile cannot be loaded.
You profile might be corrupted and needs to be recreated.You can also check the tutorial to
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlGood thread on Technet dealing with corrupted user profiles
http://social.technet.Microsoft.com/forums/en-us/itprovistasecurity/thread/e806dd5d-6764-463e-B181-e3aaee271231/How to fix a corrupted user profile:
http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxIf please reply back and let us know if these articles have helped solve your problem or if you still need help.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Data entry on the host VI without FIFO Massive?
Hi guys,. First post on the boards and about two weeks in LV in time real/FPGA so be gentle! I'm data capture of a system using a CRio 9082 and Converter A/D NI9215. The FPGA vi runs a timed loop (10 US or 100kS/s) that pulls in the data and sends th
-
I have the problem with drivers?
Hello! I have this problem: Can you help me? I have HP Pavilion dv5 1161-en OS: Windows Vista Ultimate SP2 32-bit
-
How to score a certain number of volumes in my hard drive
HP PAVALLION G6-1201TX WINDOWS 7 HOME BASIC
-
Help in requesting a publication activity
HelloI'm calling a business of a proxy service using a publication activity. I assign a value to the body element <soap-env:Body>. ${xquery to the variable}.. </soap-env:Body> The above is the code snippet. This beautiful work as long as I use not an
-
How can I put file animate edge in a redesign project or dreamweaver or edge?
I tried to follow the video that Google appears when I asked this question, but I got nowhere with it. Part of the problem is that the person who is to explain the process uses a screenshot which is unreadably low resolution.In any case, when I try t