Is it acceptable to ignore service pack 2 and install service pack 3 instead?

Similar Questions

• Download and install Vista Service Pack 2 - difficulties.

  So, I posted this in another forum, but told me to re-post here with more info... but I have no more.  I'll just re-post I posted in the other and see if someone here can help me.  Thank you!

  I don't get an error downloading the service pack, but my computer restarts.  I know, they say that it might restart several times, but Windows is trying to start mode safe because it has not been closed properly.  I tried three times, three times all automatic updates.  Twice I restarted in safe mode, it and tried to determine what the problem was, but could not.  I know that the error codes and the help of stuff, but I have not write everything, and I don't want to continue to have my computer turned off properly.  Another time I ignored the recommendation in Mode safe and started Windows normally.  He said it was configuration updates, but he stopped even before it began, and the update is still waiting to be downloaded and installed.  If anyone has any information that they think will help, that would be great.  I know I don't have a lot of valuable information, but whatever it is would be helpful.
  Thank you.

  Well, I went to try to reinstall and cull all error messages and download it no matter what, but now Windows will not start.  Nothing has actually been installed, I think not, because the installation process is always interrupted.  I ran the fixer thing turning and I tried to restore to an earlier point, but he could not know what the problem was, and he could not restore the computer to an earlier date.  I was planning to do a while system restore and losing all my files, I don't have many of them.  But I don't want to have to go through the motions again downloaded and installed massive amounts of updates needed.  Does anyone have advice so that maybe I won't have to do?  Thank you.

  Thank you, guys.  I know that I don't give a lot of information...

  1. How do I uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  2 learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  Information about Service Pack 2 for Windows Vista and Windows Server 2008
  http://support.Microsoft.com/kb/948465

  3. If necessary-
  Startup Repair: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-AU/help/5c59f8c1-b0d1-4F1A-AF55-74f3922f3f351033.mspx

  TaurArian [MVP] 2005-2010 - Update Services

• Get the Error Message When you try to download and install Vista Service Pack 1

  Hello

  Update Windows guard neglect when you try to download and install Vista Service Pack 1 and I get the error message 80092004.  Please notify.

  Thank you
  Andy

  Hello

  Welcome to the windows vista forums.

  1. stop the Windows Update service (make sure that you are logged on as administrator)

  Click the Start button | Control Panel | System and Maintenance | Administration tools
  Double-click Services.
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click on stop.

  2. Click Start, type %windir%\System32 in the search box and press ENTER.

  Find and rename the folder C:\Windows\SoftwareDistribution.

  3. start the Windows Update service

  Start button | Control Panel | System and Maintenance | Administration tools
  Double-click Services.
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click Start.

  This procedure will erase your history on the Windows Update Site. Not important.

  Don't forget to restart and then try the update again. If there is no corruption in that
  folder, it would be gone now.

   

  Please, try now to windows update and check if you get the error.

  You can also download the stand-alone SP1 package. You can download the windows vista SP1 by clicking on the link below, please follow the instructions in method 3 in the KB article:

  http://support.Microsoft.com/kb/935791#Method3

  I hope this information is useful.

  Please let us know if you need further assistance.

  Concerning
  Rehman - Microsoft Support

• I am repeatedly offered Windows Vista Service Pack 1, even though I downloaded and installed successfully.

  Original title: Windows Vista SP1 64 bit (KB936330) 1.5 MB update.

  I just reformat my computer and am trying to do the update process.  I use Microsoft Vista 64 bit and got most of the SP1 is installed.  TI completed most of it restarted, full of a few other updates and is now stuck on 1 part of the update.

  He keeps asking to install "Windows Vista Service Pack 1 for x 64-based Systems (KB936330) which is a 1.5 MB file.»  I go through the process.  He told me that I downloaded and installed successfully, and then when I hit the button to Windows Update, there is still wanting to be installed.

  I'm sure that this issue has arisen before but most of what I saw refers to the two error codes or problems with the installation of SP1 together.  Help, please!

  I had the same problem, I must have downloaded and installed sp1 about 10 times and there is no way that he was only 1.9 MB.

  I finished downloading it manually from the main site of Microsoft.
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30
  Once you are done installing the update and Windows update tent always updated sp1, simply click on "check for updates" at the top left of the window, and who should confirm that sp1 has been updated and it should not try sp1 update more.
  It took about 1-2 hours in total, but it worked for me, hope this helped.

• Windows update is not download and install Service Pack 1, 2 3

  Did a fresh install of Vista 32 bit Home Premium on Acer Extensa 4420. After repeatedly run Win Update and installation of more than 60 update updates said that I was aware. HOWEVER, SP - 1 was not detected as missing but was necessary for the other software work. I found SP-1 and installed manually. Now Win Update refuses to download Service Pack 2, so of course it also doesn't download Service Pack 3.

  Why is Win defective Update and do not install it no matter what Service Packs?

  Do I have to manually install SP2 & SP-3 or should I wait until I discovered problems or get a virus or another bad thing because Win Update did not bother to run properly?

  Did a fresh install of Vista 32 bit Home Premium on Acer Extensa 4420. After repeatedly run Win Update and installation of more than 60 update updates said that I was aware. HOWEVER, SP - 1 was not detected as missing but was necessary for the other software work. I found SP-1 and installed manually. Now Win Update refuses to download Service Pack 2, so of course it also doesn't download Service Pack 3.

  Why is Win defective Update and do not install it no matter what Service Packs?

  Do I have to manually install SP2 & SP-3 or should I wait until I discovered problems or get a virus or another bad thing because Win Update did not bother to run properly?

  ===========================================
  I think it may be better if you download full
  files on your desktop and then install from there. And... BTW...
  There is no Vista SP3.

  Once you have the file on your desktop, it can be a useful
  try to unplug the net and turn off your anti-virus
  before installing.

  The following links may provide something useful... the links are
  intended for 32-bit and 64-bit versions.

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1
  (expand the section: "manually install SP1 using the ')
  Microsoft Download Center")

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://Windows.Microsoft.com/en-GB/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2
  (expand the section: "manually install SP2 using the ')
  Microsoft Download Center")

• I finally down loaded and installed service Pack 1 for vista is when he died

  Downloaded SP1 after 2 visits to microsoft solve this centre, there was something like 6 attempts this month to download SP1.
  Itconected to the down loaded and installed himself off the machine. It works and it starts upeither to launch repair (recommended) or normally.
  repair can't fix.
  Normally starts to load, then a back line? loading orders? begins to roll things like 1592/88609...dll, or.sys etc, until it freezes on
  !! 0x0c01a001d! 9073/88609 (\Registry\Machine\COMPONENTS\DerivedData\...)

  How can I make it work. Can I uninstall via the command-line... no restore point prior to download SP1

  Hello

  Perform the following methods and check if it helps.

  Method 1:

  Try to do a restore of the system of the Windows Recovery console using the Vista disc. Read the following article to do the same thing:What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 2:

  You can try to access the Windows Recovery console prompt and see if you can manually remove Service Pack 1 on your computer. Here are the steps to remove Service Pack 1:

  1. open a window to the Windows Recovery console command prompt.

  2. run the following command, depending on the version of the Windows Vista service that you want to uninstall:

  • For Windows Vista Service Pack 1: C:\temp\Windows6.0-KB936330-X86.exe x:C:\temp

  Note	This command assumes that the file Windows6. 0 - KB936330.exe is located in the C:\Temp folder

  3. He must create a sandbox environment before you can continue to step 4. This allows you to manage safely an untrusted program. To create a sandbox, type md, sandbox.

  4. to remove the Windows Vista service pack, type or copy and paste the following command, depending on the version of the Windows Vista service that you want to uninstall:

  • For Windows Vista Service Pack 1: start /w pkgmgr.exe /m:c:\temp\Windows6.0-KB936330-X86.cab /up s:sandbox

  In this command, NNN is x 86, x 64, or IA-64.

  If these steps successfully uninstall the service pack of Windows Vista, and this resolves the issue, you are finished.

  Here is an article that will give you different methods on how to remove Service Pack 1:
  http://support.Microsoft.com/kb/948537

  Hope this information is useful.

• Full version Windows 10 downloaded and installed more than 10 hours a day for laptop Windows 7 Service Pack 1

  Hello

  Currently, I have a laptop running Windows 7 Service Pack. Yesterday, 1 tried to download Windows 10 for more than 10 hours then turned to install for centuries. So, I stopped the installation. I wonder... can I know - is it normal to take some time to download and install Windows 10?

  Thank you.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must
  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times and try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Do a clean boot, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
  • If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

    How to: upgrade previous versions of Windows using the file ISO for Windows 10

    How to download official Windows 10 ISO files

• Given that I uninstalled avast! antivirus and installed Bitdefender Internet Security 2015 Thunderbird asked to accept an invalid certificate or not.

  Given that I uninstalled avast! antivirus and installed Bitdefender Internet Security 2015 Thunderbird application if you want to accept an invalid certificate when you try to receive new messages.

  Please take a look at the two attachments (it seems to be a problem with the download of jpg files).

  Obviously Bitdefender manipulates the certificate (no doubt to be able to scan the e-mails via an SSL connection). But I'm not sure.

  Would you recommend to confirm an exception for this certificate (permanently)?

  Thanks in advance.

  Greetings

  Marco

  Thank you, christ1.

  I discovered that after disabling SSL scanning in Bitdefender, this problem no longer exists.

  Maybe this can be seen as a confirmation that the certificate belongs in reality to Bitdefender. Because it is my concern, that is the validation of this certificate to make sure that Bitdefender is the transmitter.

• Automatic update arrived and installed himself, but then told me that it was incompatible with my Mac version: 10.5.8. Firefox version 3.6.26 is now about it. It seems to work even. Y at - it's going to be a problem or should I ignore this message?

  Automatic update arrived and installed himself, but then told me that it was incompatible with my Mac version: 10.5.8. Firefox version 3.6.26 is now about it. It seems to work even. Y at - it's going to be a problem or should I ignore this message?
  If I need to can replace it where I get an older version?
  Thank you

  Firefox 4 versions and later, do not run on a PowerPC Mac and require at least OS X 10.5 and an Intel Mac.

  The latest support for your operating system version is 3.6.26 , you are fully updated.

  For more information, see:

  Firefox 3.6 system requirements

  Firefox 10 system requirements

  [For older Mac that are not supported in versions of Firefox 4 +, if you want, try TenFourFox for PowerPC currently running Mac 10.4.11 and 10.5.8]

  http://www.floodgap.com/software/tenfourfox/

  http://tenfourfox.blogspot.com/

  https://code.Google.com/p/tenfourfox/wiki/PluginsNoLongerSupported

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• I have several XP Pro PCs on a network and install a new mixer and re-install a NAS driving etc the Bonjour service ' should output "on several PCs

  Hello, the Service stops

  I have several XP Pro PCs on a network and install a new mixer and re-install a NAS driving etc the Bonjour service ' should output "on several PC. Although I was able to restart the service through administrative tools, Services I would like to understand why this service should pick out? It involves service of buggy code that can't cope? I've rarely met other Services just to die. No idea why this is happening and how I could avoid happening again as a normal user do not know how to fix it.

  Unless you have Apple computers on your network (or a PC with the Apple software like iTunes and you share iTunes music between your computers), you need not Hello.  Just, stop the service and set its startup type to manual or disabled.

  Hello Apple support page

• Of hard drive and installed new drive but Code failure not accepted. Original install was XP with Vista update.

  Of hard drive and installed new drive but Code failure not accepted.  Original install was XP with Vista update.  What do I need to install the xp before installing vista?

  How to activate Windows 7 or Vista manually (activate by phone)
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  Also:
  How to activate Windows Vista by phone
  http://support.Microsoft.com/kb/940315
  http://www.mydigitallife.info/2008/10/13/how-to-activate-Windows-Vista-by-phone-activation/

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• BlackBerry Torch 9810 smartphones does not accept the App World Ts & Cs and can not install applications

  Hi, I had a search in the forums and knowledge base and has not been able to find an answer to this problem.

  I have a new Blackberry Torch 9810 on O2 to the United Kingdom. I have Blackberry App World installed and I have App update the icons in the my messages folder. Whenever I try to go to my Apps and install updates in the App World, I get the terms and conditions window if poster, I scroll down, click on 'accept' and the window disappears and nothing happens. I click on my Apps again, same thing, window appears again.

  I uninstalled App World and reinstalled and I still get the same problem, I can not get the Ts & Cs to accept so can't update my apps or install others. If someone else has had this problem and is there a solution?

  Thanks for your time.

  Ant

  OK... try this...

  (1) make sure that you already have the RIM desktop software installed on your PC:

  • http://us.BlackBerry.com/apps-software/desktop/

  and have executed at least once with your BB attached (so that it can do it's initial configurations).

  (2) attached via the USB port of your PC (the software didn't need to run)

  (3) launch the browser on your PC and go here:

  • http://appworld.BlackBerry.com/WebStore/

  Leave the plug in install and 'connect' to your BB ID account (via the browser/PC)

  See if that allows things to configure correctly.

• Download and install online offline video language packs for windows 7 32 bit

  Hi all.

  I want to be able to read DVDs that are not in English and translate them into English. How you can download and install language packs for windows 7 32-bit

  E-mail address is removed from the privacy *.

  What type of DVD?

  Most computer DVD (contains programs) should operate normally. in the State.  You usually just to install the correct keyboard language.  Your "installed" program needs to work with your windows 'English' "menus".

  DVD movie requires a movie DVD player and must be in the same area of your Windows DVD / computer drive DVD was purchased from.  It is a system of "copy protection" DVD

• I tried to insert a password to protect a document that I send. He told me to add a service that I paid for. I'm still not able to protect document and install a password. I went to tools-Protect but he always tells me that I have to pay fo

  I tried to insert a password to protect a document that I send. He told me to add a service that I paid for. I'm still not able to protect document and install a password. I went to tools-Protect but he always tells me that I have to pay for this service after I did. How can I add a password to open my document?

  Hi cj47163119,

  You need Acrobat application to secure your document with password. It seems that you use Acrobat Reader.

  Acrobat Reader is a free service and do not have this option.

  If you have Acrobat subscription, you can download it here: Download Adobe Acrobat products. Standard, Pro | DC, XI, X

  For more help, see this KB doc: Security with passwords, Adobe Acrobat PDF files

  Kind regards

  Meenakshi

• I have windows 8.1. Try to uninstall the software adobe reader XI (11.0.13), because it does not have to download and install again. a pop up comes up saying locate AcroRead.msi. When I found this file, it is not accepted. What can I do?

  I have windows 8.1. Try to uninstall the software adobe reader XI (11.0.13), because it does not have to download and install again. a pop up comes up saying locate AcroRead.msi. When I found this file, it is not accepted. What can I do?

  Hi georged67217474,

  Please refer to this threat: Re: get Acrobat install error how to fix?

  Let me know if it helps.

  Kind regards

  Meenakshi