Is it better to transfer usb2, eSATA (or usb3) in small quantities or large amounts of data? Corrupted data?

Similar Questions

• Impossible to transfer large amounts of data more than 10 GB

  Original title: the maximum data transfer size?

  I recently installed an eSata controller card in location faster PCIex-1 of my computer to benefit from a transfer of data to and from my Fantom drives GreenDrive, of 2 TB external HARD drive.  When I started to copy the files from that drive to a new drive HARD internal, I recently installed I could not transfer large amounts of data more than 10 GB.  The pop-up message indicating files preparing to copy, then nothing would pass.  When I copy or cut smaller amounts of data all works fine.  Perplexed...

  I think I got the question.  It seems that some of the files I transfer were problematic.  When I transferred in small amounts, I was then invited for what I wanted to do about these files.  Thanks for the reply!

• With the help of the network location and mapped a drive to the server FTP. during the transfer of very large amounts of the login information is always lost.

  With the help of the network location and mapped a drive to the server FTP off site; during the transfer of very large amounts of the login information is always lost.  Computer power settings are configured to not to do no matter what, I'm assuming that the ftp server can publish a scenerio timeout but is there a way for my computer and windows to restart the file transfer?

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you have a problem with networking on the FTP server.

  The question you posted would be better suited in the Technet Forums. I would post the query in the link below.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• When installing an Adobe Pro first, how much amount of data is downloaded (or) what would be the size of the bet up the file. Kindly help out me

  When installing an Adobe Pro first, how much amount of data is downloaded (or) what would be the size of the bet up the file. Kindly help out me

  You have not specified a version, so here is a list of various for Windows...

  Adobe - Premiere Pro: For Windows

• How better to transfer files to one external drive to another

  How to transfer files from one external drive to another?

  You can drag individual; or just select and drag as a group by holding down the Option key for you key keep on #1 Drive until you are sure that they all copied over correctly to Drive #2...  Or you can select all/copy/paste.    Do not erase the files from the first drive until you are certain that they all copied properly.

• When I started to use Firefox 4 Beta on my web sites printing is very small and the words are not separated

  When I use the Beta Firefox4, print details of my web sites printing is very small and the words seem to be in a lineand not sepperated.

  Thanx

• Compaq SG3-350UK: port USB2 Upgrade for USB3

  Hello, I'm new here.

  I have a desktop Compaq SG3-350UK with 4 USB2 ports.  I want to update at least one for USB3 to speed up backups to external storage.

  Can anyone tell if this is possible and if so what parts to buy and how to do it.

  Thanks Steve_38

  Steve-

  You would need to buy an expansion PCI Express (PCIe x 1) card,
  who will be its SuperSpeed USB 3.0 at the back of the computer ports.

  There are several to choose from, the most popular-2 and 4-ports.
  CHECK the support of the seller for your operating system current (and future) - pilot of hardware support.

  All add-in cards contained in the USB - IF Product Search (Internet link below) have
  PASSED the compliance tests and are certified to carry the USB logo.
  http://www.USB.org/kcompliance/view/
  ====
  Compaq SG3-350UK desktop computer
  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us & LC = in & Product = 503895

  Your computer uses the card mother Foxconn H-RS780L-mATX (Aira-GL8)
  Compaq Code Name: Aira-GL8
  http://support.HP.com/us-en/document/c02556928

  Chipset: AMD 760G
  Storage media: 2 x DDR3
  Front side bus speeds: 5200 MT/s
  The processor socket: AM3
  Expansion slots: 2 PCI Express x 1 slots
  ====
  EDUCATION SECTION:

  USB Implementers Forum, Inc. (USB - IF)
  Alan Berkema, is the representative of the company Hewlett-Packard at the USB - IF.
  http://www.USB.org/developers/ssusb

  BE aware of the developments of current USB (3.1 and 3.2) 3.X
  http://en.m.Wikipedia.org/wiki/USB_3.0
  ===
  POTENTIAL RFI: USB 3.0 and 2.4 GHz ISM band wireless (Wi - Fi and Bluetooth)
  PC Magazine, September 9, 2013
  http://www.PCMag.com/Article2/0, 2817,2423604,00.asp

  Cables and USB 3.0 devices can interfere with devices operating in the 2.4 GHz ISM band wireless. This can cause a drop in flow or a complete loss of response with Bluetooth and Wi - Fi devices.
  Various strategies can be applied to solve the problem, ranging from simple solutions like increasing the distance of USB 3.0 of Wi - Fi and Bluetooth routers peripheral devices, to the application of shielding around the additional internal computer components.

• Large amount of transfer of songs in a desktop folder

  Hello

  I'm trying to copy approximately 6000 songs from iTunes on a folder on my desktop. I was able to copy about 250 songs and then it allows me to copy over. When I drag and drop songs from iTunes on the record, nothing happened. I'm trying to create a subdirectory in the folder and paste it here, nothing happened. I create another folder on my desktop and tried to paste, nothing happened. But if I just do one song at a time, he copied.

  What will be the reason?

  Suggestions or comments are much appreciated.

  Thank you.

  It's your library or a playlist it contains? If a playlist, you can export the list to a file XML, then shift-start-Tunes to create a new library on a different path, import the XML playlist and consolidate the media in the media of the new library folder. Then, you'd be able to do everything you want to do with this subset of files without affecting the original library.

  TT2

• Problems with Windows Easy Transfer

  I tried several times to use file transfer for my old HP XP on my new HP Vista computer files.  First time I made "all user files" and stopped to transfer to half way and says that my D: drive is complete on the new Vista.  So, I made a start to recovery to factory settings and tried again.

  Second time I tried to transfer, I disabled the D: drive and tried to keep it short, not as many files.  He transferred what I asked for, but these files under a separate user.  And once again, flashing at me my D: drive is very low on space.

  I did another system of recovery, but it did not work.  D: drive is always full.  I do another system of recovery currently see.  I negligence has not set a restore point before you start.  Women for the India tech support was no help at all.

  What I am doing wrong?  Why Easy Transfer work "easily"?  I have so many games, movies, and music on my XP I can't copy on disk since I don't have a burner to work.  I'm not so concerned about the transfer of parameters like many music, although I hate to lose all my favorites in outlook express and web pages.

  Thanks for any help.

  You can burn your data on CD/DVD or a Flash dive allows you to transfer data.

  Here's info from MS on how to use it:

  Windows Easy Transfer

  Buy an easy transfer cable

  You can buy a cable easy transfer of many computer manufacturers or retailers. To make sure that the cable is designed for Windows Easy Transfer, be sure to look for a "Certified for Windows Vista" logo or the "Works with Windows Vista" on the packaging.

  Buy a cable easy transfer now at Windows Marketplace

  Windows Easy Transfer allows you to easily move the files and settings stored on your PC under Windows 2000, Windows XP, or even Windows Vista to a new PC running Windows Vista. Windows Easy Transfer will automatically transfer things like:

  • User accounts

  • Files and folders

  • Contacts, settings, and e-mail messages

  • Photos, music and videos

  • Windows settings

  • Program data files and settings

  • Internet settings

  There are several ways that you can use Windows Easy Transfer; Choose how you prefer to connect your two computers, select the data you want to transfer, then let Windows Easy Transfer do the work for you.

  Easy transfer cable

  A single cable is a special USB cable that is designed to work with Windows Easy Transfer by creating a direct link between your old PC and new PC. One of these cables is the most simple and fast method for the transfer and is recommended if you do not have access to a network. An easy transfer cable will transfer data from the PC running Windows XP or Windows Vista on a PC running Windows Vista.

  • Install the small software application provided with your cable (or download here) on your current PC.

  • Connect the cable to both computers.

  • Windows Easy Transfer will launch and guide you through the transfer process. Your information and files will transfer at approximately 20 GB per hour.

  Use a home network or small business

  If you already have a wired or wireless network, it's a great way to transfer all your data. You can use your network to transfer your data in real-time on your network or by using a shared folder on the network.

  Using an external hard drive

  If you have an external hard drive, Windows Easy Transfer can copy your data on this drive and then copy the data from the drive to your new computer.

  With the help of CD or DVD

  Windows Easy Transfer can use your CD or DVD burner PC to transfer your data. This solution is not ideal, but can work well if you move only a small amount of data that can fit on a single disc. If you have a large amount of data that does not fit on a disc, it is possible to use this transfer method using multiple disks.

  To learn more about the details of the Windows Easy Transfer process, read more at the Windows Vista Help.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  Windows Easy Transfer supports migration from the following operating systems:

  • Microsoft Windows 2000 Service Pack 4 (SP4)
  • Microsoft Windows XP Service Pack 2 (SP2)
  • Windows Vista

  Prepare the migration on the destination computer to start Windows Easy Transfer on the destination computer, follow these steps:

  1. Close all active programs.
  2. Click Start
     Collapse this includes this image

     

     Click principally made programs, on Accessories, click System Tools, click Windows Easy Transferand then click Next.

  3. Click start a new transfer.
  4. Click This is my new computer.
  5. Click No, show more options.
  6. Click on the option which is required for the prompt is easy transfer Windows installed on your old computer page .
  7. Select the destination media on which you want to store the Windows Easy Transfer Wizard files. You can store the files the wizard on a CD, a DVD, on removable media or on a network drive.
  8. Click Yes, I'll transfer files and settings over the network.
  9. Type a path and a folder name in which you want to store the Windows Easy Transfer Wizard files, and then click Next.

     Note The default path is C:\migwiz.

  Migrate files and settings from the source computer to the destination computer migration files and settings from the source computer to the destination computer by using one of the following four migration.

  1. Install a USB cable that can connect two computers and install the drivers for that cable, depending on your situation.
  2. Start Windows easy transfer to transfer files and settings to the destination computer.
  1. Look for the removable media or the network drive that contains the Windows Easy Transfer Wizard files, and then double-click Migwiz.exe to start Windows Easy Transfer.
  2. If you run other programs, you need to close these programs. You can save your work in each program, and then close the programs individually. You can also click close all in Windows Easy Transfer to close these programs immediately.
  3. Click Next.
  4. Click a network.
  5. Click connect directly via network to begin the migration.

     Note Click Save to network location if you want to store the files and settings in a file that will be loaded later. If you want to store the files and settings on a network drive, you will be asked to provide the path where you want to store the files and settings.

  6. Click everything - all user accounts, files and settings of the program (recommended) to migrate all files and settings. If you want to determine exactly the files and settings you want to migrate, click only my user account, files, and program settings, or click Customize.
  7. The list that contains the files and settings you want to migrate, and then click Start. To add or remove files or settings from the list, click Customize.
  8. After Windows Easy Transfer has completed migrating files and settings to the destination computer, click close .
  1. Look for the removable media or the network drive that contains the Windows Easy Transfer Wizard files, and then double-click Migwiz.exe to start Windows Easy Transfer.
  2. If you run other programs, you need to close these programs. You can save your work in each program, and then close the programs individually
  . You can also click close all in Windows Easy Transfer to close these programs immediately.
• Click Next.
• Determine and then appropriate removable transfer media click on CD or other media, such as a flash drive.
• Click on a network drive to save the files and settings to a folder located on the removable drive.
• In where you want to save your files, type the path to a folder on the removable drive, and then click Next.
• Click everything - all user accounts, files and settings of the program (recommended) to migrate all files and settings. If you want to determine exactly the files and settings you want to migrate, click only my user account, files, and program settings, or click Customize.
• The list that contains the files and settings you want to migrate, and then click Start. To add or remove files or settings from the list, click Customize.
• Once Windows Easy Transfer complete migration of files and settings, click close .
• Connect the removable media to the destination computer.
• Start Windows Easy Transfer, and then click Next.
• Click continue a transfer in progress.
• Where you copied your files, click on removable media. If the removable media option is unavailable, click network drive, and then click Next.
• In locate your saved files, type the path where you saved the files and settings. You can also click Browse to locate the files and the settings. After you have located the files and settings, click Next .
• Select the user on the destination computer names that match the usernames on the source computer. If there is not any user account is created on the destination computer, you may need to create new accounts. To create an account on the local computer, type a user name directly. To create a profile or a domain user, type a user name to the following format: domain\username.
• In choose the drives for files on your new computer, select the destination for each drive source drive.
• Check out the list that contains the files and settings you want to migrate, and then click Start
. To add or remove files or settings from the list, click Customize.
• Once Windows Easy Transfer complete migration of files and settings, click close .
1. Look for the removable media or the network drive that contains the Windows Easy Transfer Wizard files, and then double-click Migwiz.exe to start Windows Easy Transfer.
2. If you run other programs, you need to close these programs. You can save your work in each program, and then close the programs individually. You can also click close all in Windows Easy Transfer to close these programs immediately. Click Next.
3. Click burn a CD or DVD.
4. In Choose your media box, type the path to the CD or DVD. Click Next.
5. Click everything - all user accounts, files and settings of the program (recommended) to migrate all files and settings. If you want to determine exactly which files and setting you want to migrate, click only my user account, files, and program settings, or custom.
6. Check out the list that contains the files and settings you want to migrate, and then click Start
. To add or remove files or settings from the list, click Customize.
• After burning the CD or DVD, click Next .
• After Windows Easy Transfer has completely moved the files and settings, click close .
• Put the CD or DVD in the destination computer.
• Start Windows Easy Transfer, and then click Next.
• Click continue a transfer in progress.
• In where you copied your files, click read CD or DVD.
• In choose your media box, select the drive to CD or DVD, locate the files and settings and then click Next
• In choose the drives for files on your new computer, select the user on the destination computer names that match the usernames on the source computer. If there is not any user account is created on the destination computer, you may need to create new accounts. To create an account on the local computer, type a user name directly. To create a profile or a domain user, type a user name to the following format: domain\username.
• In the box to choose the drives for files on the destination computer, select the destination for each drive source drive.
• The list that contains the files and settings you want to migrate, and then click Start. To add or remove files or settings from the list, click Customize.
• Finished Windows Easy Transfer to migrate files and settings, click close . Mick Murphy - Microsoft partner

• Data transfer between PC and device

  Hello

  I need an advisor. I was wondering what would be the best way to transfer data from the PC to a connected device?

  Here's the scenario: I need to download a large amount of data from a web service. To do this, I use a small application installed on the user's PC. Once the data is downloaded and converted, the application converts it to an xml file. I would push this file or string with the XML itself to the device that will be connected through the USB port.

  In addition, the scenario reversed: I can access the PC to the device file system?

  Thank you

  Daniel

  Hi Daniel,.

  You just need to synchronize data between PC and device and device to the PC. I'm wrong?

  There are 2 ways to do it.

  (1) Intellisync APIs, (Director of office requires)-net.rim.device.api.synchronization

  (2) USB connection. (Doesn't require no Office Manager)-use streamConnection

  You will get the USBsample in samples of JDE. I guess that as the example of synchronization is in examples of JDE applications.

  Please reply,

• Need to transfer data from large (> 32 k) from the Page

  I have a house built to the Add-in item that can produce a data value (which is a set of data in JSON format) is greater than 32 k.
  
  On a single Page, my approach is a pl/sql procedure:
  myPackage.addin_api. NewDataSet (: P5_ID / * out, int * /,: P5_JSON / * in clob * /);
  
  I have it working for smaller sets, but encounter errors when the size exceeds the limits of the APEX.
  
  How can I transfer the large amount of data?
  
  Thank you
  
  MK
  
  Apex 4.2.1
  listener 2.0.1
  Oracle 11.2

  Maybe this plugin might help? : http://www.apex-plugin.com/oracle-apex-plugins/dynamic-action-plugin/enkitec-clob-load_318.html

  Thank you

  Tony Miller
  Ruckersville, WILL

• Wireless disconnects the transfer of large files

  Hello

  When large amounts of data transfer (in one or several files - no difference) of my D520 wireless on my desktop via a belkin F5D7632v1000 drops wireless connection and the transfer stops. Happens usually somewhere between 30 and 100 MB. When falls and displays cannot restore, connect by clicking on OK re - find the network again. I had this problem once on an old HP laptop and it was something to do with needing old drivers for the wireless card. The map in this particular laptop is a Dell 1390. Driver 4.100.15.5.

  Now, I had this before, when I had a laptop to work the same and had diversity of main antennas set in advanced settings for the card and I disabled the IBSS 54 g protection mode. However, this doesn't do the trick. Unfortunately, I don't have access to check the other settings in the advanced wireless adapter properties. Does anyone have a failsafe of the advanced settings of the adapter set? See you soon.

  
  

• A few questions on the framework of the actor

  Hi all

  I tried to get my head under the actor and begins to see the light at the end of this tunnel-no need of sunglasses right away, because I have a few questions remaining:

  1. data transfer :

  So far I've had a quick glance the evaporative cooler model and actor model, as well as worked through the LabVIEW actor Framework Basics by labvolution. These examples are pretty clear for me now. What I don't understand though, is how you are supposed to provide "real" data These examples use only references and then update using the "value" property This may not be very fast, but is probably still enough for user interface applications. But what happens if I have a player who generates data by reading example of a card and I have, let's say, want to detach this far from the data backup process in a file. How I would pass large amounts of data between stakeholders effectively.

  2. using the framework of the actor with RT:

  In presentations to the AF, I saw that they always mentioned that it was completely "capable RT. While this may well be true for the RT itself system, yet once I wonder how to transfer data from an actor of the RT of a player in Windows. Yet once again, suppose I want to generate data on a cRIO and save that data on the host PC. I will establish a channel of communication between the target myself by network flow or similar? It defies any sort of encapsulation of the AF in my opinion...

  3. set the actors:

  However, what worries me the most, is the definition of the actors. How can you know what is a player in your system? Each card set as an actor? Define you each device as an actor and consolidate all I/o to the breast? Is there an easy way to know how to set the actors?

  4. technical support:

  While working with the examples, I found that the debugging can be quite difficult. I had several cases of "Not executable Subvi" this point through several other live who finally call something dyynamically and from there, you discover that one of your screw is broken. Is there an easy to know what is the problem? I know there are modules for LabVIEW that are designed to turn on debugging part of the actor, but who would not be available in a review of the CLA, where you will have only a base installation of LabVIEW.

  5 root and nested actors:

  Finally, I wonder what root and nested average actor. So far my understanding is that the actor root is the parent actor you cast in the launch of VI and nested the actors are all children who serve the actor parent and are, most of the time, launched since the actor-actor of parent nucleus. Is this correct? Is there a better definition of it?

  Any help on this is greatly appreciated. I'm looking forward to the discussion and interested if you frequently use the framework of the actor or if you have abandoned it even once after using it.

  See you soon,.

  Pete

  A good place to ask the question in the framework of the actor is in the community:

  https://decibel.NI.com/content/groups/actor-framework-2011

  And Yes, I've used and uses the framework of the actor.

• Questions about serial port read and write at the same time

  Hi I create a user interface for the communication serial port, where there are essentially 2 front panels, where the user enters commands one and the other where the prints of UART is delivered. I thought initially using a state machine but the reading and writing may be independent sometimes and so I can't rely on States. I searched a bit on the forum and he left me even more confused. Help, please.

  (1) in a thread that sessions visa duplicated has been used for writing and reading at the same time, is it recommendable? How will this affect performance?

  (2) essentially when the vi is reading data are it must constantly view as well, however, someone said that it takes too much memory to use shift registers, so how do I go about this? If using a State in queue after the loop of reading it affects the playback loop and be sequential?

  In addition anyway is to move the cursor to the latest data from the indicator

  (3) for the control of the user input, assumes that the user has entered an order in the control and press ENTER, then writing visa is launched, but if it comes in another string and press enter then write must be called again... is - it possible? will detect the previous commands in the control of compensation?

  (4) according to my understand the expectation for the event do not monopolize resources and writing can go in parallel, am I right?

  Thank you. I have attached a very basic vi which took me to the point, but I want to make it more robust. Please help especially in the part of the user interface.

  su_a,

  (1) you can have only one session to a port. Several UART can handle full duplex so performance is not affected.  At flow rates of high data and large amounts of data, buffering and latencies of BONE can become a problem.

  (2) who told you that shift registers using too much memory? Shift registers are usually the best way to transfer data from one iteration to another. String concatenation inside a loop (registry to offset or not) causes the chain to develop and may require re-allocation of memory.  Your VI never clears the string so its cold length become very large.

  Generally, you do not have an active cursor on an indicator.  If you want to always display the most recently received characters and turn on the vertical scroll bar use a property node to keep scrolls to the bottom.  This can be annoying for users if they attempt to manually move the scroll bar and find that the program continues to move it back automatically.

  (3) if the user has changed the value in the chain of command, when he hits enter the modified value event fires.  Simply strike brace does not change the value and does not trigger the event.  Not control need to be erased, but the value that he has to change.  If you want to send the same command again, have a button send a command may be a better choice.

  (4) write is a case of the event.  It is not in parallel with anything.  The structure of the event do not monopolize resources.  The other loop will run while it waits.

  The event loop will not stop when you press the STOP button. Probably it wll take two command: change events of value after JUDGMENT before any loop stops.  Replace the Timeout event (which never expires) with a STOP: value change event and a real wire of this judgment to the Terminal endpoint.  Remove the local variable.  Make mechanical locking when released.

  Lynn

• Data are automatically downloaded to the computer.

  Original title: automatic download

  Hello

  I am facing a problem about automatic download of data. Even if my computer does not all tasks over the internet, by clicking on 'View network status' I see that bytes are received. What happens for each internet connection. However, speed is not affected. I can surf and download stuff pretty quickly. I disabled automatic updates and notifications of the app. I have Norton Antivirus and a complete analysis of the system has not revealed any virus.
  I am unable to change the Sync settings on connections inhalers option and I think that the problem is perhaps due to this. It is 'ON '. I can't change it because whenever I try to log in my Microsoft Account users, after entering my email address, I get "Please Wait". I want to know why I'm getting this and how I can solve this problem.
  If you think that the automatic download is due to something else (like a virus, perhaps), please tell me what to do. Because of this problem my internet Bill is going through the roof. If someone can provide a solution I will be immensely grateful.

  Thanks for the help of microwave blue. The problem was caused by a spyware. He was automatically transfer large amounts of data. I solved the problem by following these steps:

  1. I uninstalled Norton Internet Security, because I had the feeling that for some reason he was not be able to detect the virus that was responsible for large data transfers.
  2. I have activated Windows Defender and updated.
  3. I uninstalled all free software (like Karl, etc), as well as known spyware with programs (free WildTangent games).
  4. I had not updated Windows for some time, so I downloaded and installed all updates pending (important as optional).
  A comprehensive analysis by Windows Defender detected Adware:Win32 / WebCake. I discovered that this causes pop-ups to appear in browsers.
  The big unknown transfers have stopped now. I am really impressed by Windows Defender. Regarding Norton, it's a really lame antivirus. Better to move to Windows Defender/Microsoft Security Essentials.
  Please tell me about perfmon.exe. I can now see what process is changing the amount of data.