Is it better to use a single project or to jump back?

Greetings,

I am using Captivate 4. And I wonder if it is better to use a single project or to jump back?

I have a master project and instead of a big project, I was wondering on jumping small projects and returning to the main.

I tried to understand the idea of jump to slide 10 and jump to another project and then again to slide 20.

Should projects be published in order to see this work?

I'm learning just on Captivate so I'm not sure best practices.

Thank you.

It is not easy in the Captivate projects to switch to another project at Midway specific slide.  Captivate is configured by default to launch just each project of the first slide.

There are workaround solutions published on this forum who has to jump in the middle of another project, but they may require some complex coding in JavaScript or ActionScript.

Tags: Adobe Captivate

Similar Questions

  • Why filtering by "unused" shows the files that are used in the project?

    Above the list of clips, I choose 'unused '.  I thought that this would be a practical way to show me the files I can delete the library because they are not used.  The thing is, I select this option, I see it shows me files that are certainly in use on the timeline, then what's the point of this?  How can I show actually files that are not used and as long as I can safely remove?

    It shows the unused portions of clips. If you want to remove a clip that has any items used in a project, you're better activation of the clipping indicator used. Any clip with an orange bar has been used.

  • Could Scan mode and FPGA mode be used in a project?

    Hi all

    I need a project that the current NI9203 with mode of analysis samples and samples of the accelerometer of the NI 9237 with FPGA mode. It could be achieved? Could Scan mode and FPGA mode be used in a project?

    I use labview2009.

    Thank you very much.

    Yes, they can. This mode is called hybrid mode. To use the Mode of LabVIEW FPGA IO modules, simply slide the module to the target FPGA in the LabVIEW project, disconnected from scan mode. Then use LabVIEW FPGA to program the modules and use I/O variables for read and write I/O on the remaining modules. When you use a LabVIEW FPGA Mode on one or more modules, the logic of the scan Mode CompactRIO on the FPGA, known as the RIO Scan Interface, is compiled in a single application of FPGA with LabVIEW FPGA VI. If no module is configured to use the scan mode, the RIO Scan Interface is not included in the compilation.

  • In general, is it better to use java.sql.Date and java.sql.Timestamp instead of oracle.jbo.domain.Date?

    Hello world

    During playback of Oracle ADF Real World Developer's Guide, I noticed the dates match occurring in JDeveloper is different from what is the list in the book. JDeveloper is failing to oracle.jbo.domain.Date, but according to the book:

    DATEjava.sql.DateDATE type is mapped to java.sql.Date if the column in the table is a no time didn't need information zone.
    DATEjava.sql.TimestampDATE type is mapped to java.sql.Timestamp if the column in the table has a component "time" and that the client needs to zone information.
    TIMESTAMPjava.sql.TimestampThe TIMESTAMP type is mapped to java.sql.Timestamp if nanosecond precision is used in the database.

    In general, is it better to use java.sql.Date and java.sql.Timestamp instead of oracle.jbo.domain.Date? Using java.sql.Date and java.sql.Timestamp could save me some headaches conversion date. And, is there a place in JDeveloper to display these maps? I looked around and didn't see anything.

    Thank you.

    James

    User, what version of jdev we are talking about?

    In GR 11, 1 material versions db types date and timestamp are mapped to types of domain data that represents a wrapper for the native data types. The reason was that the framework can work with the domain types regardless of the underlying data type.

    Since Oracle 11 GR 2 maps the types DB to java types (default selection, you can change it when you create a model project, you can set the Data Type Mapping). Once the pilot has business components define you cannot change this setting it would break existing components such as eo or vo.

    So if you are working wit 11 GR 1 subject, you must use the domain types, if you work with GR 11, 2 or 12 c, you can use the domain types, but it is recommended to use the java type mapping.

    Timo

  • How to get a list of paths for all the files used in a project

    I have a CC Pro first project that has a large number of bins.  A sequence in one of these bins uses files of the other tanks.  I'll try to find the locations of all of the files used in the project.

    (1) obviously I can select each item in the timeline and display in the finder, but there are a lot of clips

    (2) the use of the video associated with each file in the project would help.  However

    1. I have not found a way to display only the clips that have the use of the video if all locations have not been developed.

    2. use video shows its use for all sequences, so it should be manually checked traction towards the bottom for each file see if it is used in the sequence in question.

    (3) I tried to export the project to the final cut pro xml.  The url path gives me the information I need.  For some reason, however, when I do the single export item information are here, not the information for all the other elements of the project.

    (4) I got tired of export for speedgrade, and all file names are there.  However, the railways are not.

    Basically, I want to find all the files in the project and transfer them to a specific folder for this project.  There must be a way to do this, but I'm not...

    You can import the sequence in a new project and then use the project manager to make them all together.

  • Export the sequence XML file browse for use in another project

    When I generate a browse sequence based on the table of contents by using zero for the level of the pound, rather than get A, A1, A2, B, B1, B2, I receive A, B, A1, A2, B1, B2.  The table of contents first crosses all elements of level 1, cycles backwards through all the level 2 element, then 3rd level, etc.

    My solution was to automatically create the sequence to browse at level 0 and then manipulate manually to the output depending on how my readers would actually read my book online (IE A Aa A1 A1a A1b A2 A2a A2b B B1 etc etc).

    Now that I have my sequence in the correct order for this project, I don't want to repeat these steps each time I create a new version of my HLO for the guide even after that a few minor updates have been made to the source of the FM.

    There is a file named whbrs.xml in the output folder and contains the sequence order of travel that I specified in my no workaround.

    Is it possible to export this file to another location for use in another project that references the same guide?

    This methodology is much preferred, as I work at a level of the company with several documents (some numbering in the hundreds of pages) and do not want to have to manually use my solution for each project that I update in the next few years.

    Hi Kristopher

    You probably don't want to use that particular file, because it is an output file. You'd probably have better luck using the file ProjectName.BRS as this one must be a source file.

    However, keep in mind that if (or how) it will work completely will depend on having the recipient project using the same identical structure and identical file names.

    See you soon... Rick

    Useful and practical links

    Wish to RoboHelp form/Bug report form

    Begin to learn RoboHelp HTML 7, 8 or 9 in the day!

    Adobe Certified RoboHelp HTML Training

    SorcerStone blog

    RoboHelp EBooks

  • If I use a single individual loop for my video and upload it to youtube will be my video will be blocked or will I get copy right strike?

    If I use a single individual loop for my video and upload it to youtube will be my video will be blocked or will I get copy right strike?

    I already read the agreements loops but unable to understand exactly what it means please help me...

    They say individual loops must not be commercialy or other wise distributed...

    That means individual loop should not be used?

    Is the only thing you can NOT do: "Yes, I did these loops and now I'm selling you these loops, claiming that I just them

    So they are free, but you are not allowed to sell unaltered loops claiming that make them you. So you can use them for any kind of music, published published, obscure, commercial, anything; without additional costs or restrictions.

    Hello... Please help me I want to just use a single loop of logic pro X for my video and want to download YouTube wil...

  • Conversion of a project to use a library project

    Hello.

    I'm trying to convert a large main VI with a lot of sub - VI to a project that would use rather a project library. In particular, I want to pack all or nearly all my SubVIs in a library project (so that I can later reuse these subVIs to various projects) and the main VI would use this library. I hope I have the idea of libraries in the project correctly.

    Now, I thought I'll Pack all my subVIs in a library project and save it as ProjectLib, so I'll create a new project with my main VI and add ProjectLib to this project.

    Here is my ProjectLib with virtual for subVIs folders and Utils (Utils are just more generic subVIs)

    and here is my main project VI, with the library of projects above added:

    Now, I'm sure I'm doing this wrong, but I can't know what would be the right way to go about this, despite reading and re-reading helps LabView to articles on the issue (like this: http://zone.ni.com/reference/en-XX/help/371361J-01/lvconcepts/project_libraries/). Nowhere can I find a guide step by step conversion my VI existing with a lot of subVIs to this structure.

    For example, when I opened my main VI now, I see errors caused by all the missing of subVIs. My thought is that I now say my main VI: ' look, this is a ProjectLib I have included, see? Take this Subvi from there! "but I don't see an option for this.

    I would be grateful any ellucidation on how do properly what I'm trying to do. I apologize in advance for any stubbornness on my part.

    Thanks in advance.

    Hello SenSLabs,

    It seems that you are attempting to add a project (lvproj) to another project, rather than building a library (lvlib or lvlibp) and adding that the new project.  The easiest way to build a standard .lvlib is described here:

    LabVIEW Help: Creating a library to a project folder project

    http://zone.NI.com/reference/en-XX/help/371361J-01/lvhowto/convert_fold_lib/

    Once you have built the lvlib (from the old project), add this library in your project (new) and you should be good to go.

    Kind regards

  • How to locate where the shared Variables are used in the project.

    I'm looking everywhere where a shared Variable is used in my project. Right-clicking does not provide a find. The display hierarchy does not help. In the Project Explorer, the appellants find displays only the names of the screw called, not the many places where the call is made.

    Does anyone know how to find the location where a shared Variable is used?

    Edit-> find and replace. For "Select object" click and access features-> Structures-> shared Variable.

  • How can I configure a control array by using a single entry

    I am a user of LabView very newbie.    I am trying to build a component control by using a single entry 4 position (a dial (0-3) that returns a result of 4-bit based on opinions.    Should what command I use?

    The table looks like this:

    inputs | outputs

    4H Open Open Open On the ground
    2H On the ground Open On the ground On the ground
    N On the ground On the ground On the ground Open
    4L On the ground On the ground Open Open

    I'm not there yet.  I am still using the evaluation software.   Can I worry when I get material.   This works for now!  Thank you!

  • What is better to use the database or persistence.

    Hello friends,

    I have a doubt in relation to the use of the database and persistence.

    I'm working on an application based on OS_v5.0, I use a database to store my data or persistence.

    While it will be better to use as prospect of memory and speed.

    Thank you

    There is no right answer here.  Include critical factors

    (a) the data structure - is that he opposes or ranks

    (b) the size of the data,

    (c) how the data should be used

    (d) what coding effort, you are willing to put in.

    You must weigh all these factors before making a decision.

    Maybe you can give some pointers in each of these areas and we can suggest how we were?

  • When you use the Brush tool, it always comes back to the single stroke and no fill. How can I fix it? I have already disabled the new art of a choice of the basic look.

    When you use the Brush tool, it always comes back to the single stroke and no fill. How can I fix it? I have already disabled the new art of a choice of the basic look.

    Double-click on the Brush tool and you will see important option.

    Please also read the manual on the other options.

  • How you Archives used in your project?

    Hi all.

    You can add a metadata column to the first project Navigator to show which was used.  But what can you do with this information?  I want to archive all the source files, but by dragging the files from the project tree in the Finder does nothing.  Copies the entries in the project tree, does nothing when pasted in Finder or in a text editor.

    So... are there no way to identify the images actually used in your project, and then copy the files source somewhere?  Seems to be a fundamental, important feature for an NLE.

    Thank you!

    Adobe Premiere Pro help. Consolidate, transcode and archives projects

  • I am planning buy an individual package of adobe creative cloud. Can I use a single license in two of my system?

    I am planning buy an individual package of adobe creative cloud. Can I use a single license in two of my system?

    Hi Elbethel,

    A single license of Adobe Creative Cloud can be installed and activated on 2 machines for personal use.

    Kind regards

    Anand

  • Better to use an arbitrary primary key?

    Hi all

    I have an employee table where each employee has a unique employee ID. I expect to look up employees by their ID frequently. Is it better to use an arbitrary sequence as the primary key and put an index on the field ID employee or to the employee ID primary key? Thanks for your help.

    Welcome to the forum!
    >
    Is it better to use an arbitrary sequence as the primary key and put an index on the field ID employee or to the employee ID primary key?
    >
    Best practice is to use surrogate keys (for example, your arbitrary sequence) rather than actual data (employee ID) for the key field values.

    The main reason is that the values of data, data, maybe should be changed in the future. If you use a piece of data as the primary key and then must change any changes becomes problematic if there are references to foreign keys to it.

    Another reason is that these references to foreign keys mean that the value of data is now duplicated and exist in several tables. It should be changed in any of these tables.

    And business rules to deal with employee ID (or any other value of data) may change. It may be encrypted or protected against access by unauthorized persons. If ID is a primary key, because it is much more difficult to encrypt or protect the value is necessary to join the tables correctly and will therefore always available for the purpose of the request, even by people who are not allowed to access the value actually.

    Never use values of actual data for values of key with the exception of the simple sample applications.

Maybe you are looking for