Is it far from forcing view mayonnaise through any device or drive

Similar Questions

• Calling a function from a view

  Hello, I have a question:
  I create a view, and I need to call a PL/SQL to function. I would like to know if there is some difference between these two variants
  

  CREATE OR REPLACE FORCE VIEW TEST_VIEW
  AS
  SELECT Package_Name.Function_Name(Some argument)
  FROM
  ...

  and
  

  CREATE OR REPLACE FORCE VIEW TEST_VIEW
  AS
  SELECT (SELECTPackage_Name.Function_Name(Some argument) FROM DUAL)
  FROM
  ...

  Thanks for the tips.

  Hello

  The second version will allow you to take advantage of the query as the caching that can be a significant reduction in the number of calls to your function. If you must call a function in a SQL statement, this would be a way advised to...

  XXXX> create or replace package pkg_call_test
    2  AS
    3
    4      procedure p_reset;
    5
    6      function f_call(ain_arg in number) return number;
    7
    8      procedure p_print;
    9
   10  end;
   11  /
  
  Package created.
  
  Elapsed: 00:00:00.23
  XXXX> create or replace package body pkg_call_test
    2  AS
    3      pn_ct       number;
    4
    5      procedure p_reset
    6      IS
    7
    8      BEGIN
    9
   10          pn_ct := 0;
   11
   12      END;
   13
   14      function f_call(ain_arg in number) return number
   15      IS
   16      BEGIN
   17
   18          pn_ct := pn_ct + 1;
   19
   20          RETURN ain_arg;
   21
   22      END;
   23
   24      procedure p_print
   25      IS
   26
   27      BEGIN
   28
   29          dbms_output.put_line(pn_ct);
   30
   31      END;
   32
   33  end;
   34  /
  
  Package body created.
  
  Elapsed: 00:00:00.10
  XXXX>         CREATE TABLE test_data
    2  (   id  number
    3  )
    4  /
  
  Table created.
  
  Elapsed: 00:00:00.04
  XXXX> insert into test_data select mod(rownum,5) from dual connect by level <= 10
    2  /
  
  10 rows created.
  
  Elapsed: 00:00:00.01
  XXXX> set serveroutput on
  XXXX> exec pkg_call_test.p_reset;
  
  PL/SQL procedure successfully completed.
  
  Elapsed: 00:00:00.01
  XXXX>
  XXXX> select
    2      pkg_call_test.f_call(id)
    3  from
    4      test_data
    5  /
  
  PKG_CALL_TEST.F_CALL(ID)
  ------------------------
                         1
                         2
                         3
                         4
                         0
                         1
                         2
                         3
                         4
                         0
  
  10 rows selected.
  
  Elapsed: 00:00:00.15
  XXXX>
  XXXX> exec pkg_call_test.p_print;
  10
  
  PL/SQL procedure successfully completed.
  
  Elapsed: 00:00:00.01
  XXXX> exec pkg_call_test.p_reset;
  
  PL/SQL procedure successfully completed.
  
  Elapsed: 00:00:00.00
  XXXX>
  XXXX> select
    2      (SELECT pkg_call_test.f_call(id) from dual)
    3  from
    4      test_data
    5  /
  
  (SELECTPKG_CALL_TEST.F_CALL(ID)FROMDUAL)
  ----------------------------------------
                                         1
                                         2
                                         3
                                         4
                                         0
                                         1
                                         2
                                         3
                                         4
                                         0
  
  10 rows selected.
  
  Elapsed: 00:00:00.03
  XXXX>
  XXXX> exec pkg_call_test.p_print;
  5
  
  PL/SQL procedure successfully completed.
  
  Elapsed: 00:00:00.01
  XXXX>
  

  Note with the second version, the function is called once for each value in the column id rather than once for each line.

  HTH

  David

• Get the IP address of the client from the view

  I have a code that uses the API well established WTSQuerySessionInformation() (http://msdn.microsoft.com/en-us/library/aa383838 (VS.85) .aspx) call, through the argument of WTSClientAddress, to retrieve the IP address of the client that is connected to an RDP session.

  When this code is executed in a View (on XP SP3) session, it still returns 127.0.0.1 rather than the IP address of the client that connects to the session of the view. If I disconnect the session View and reconnect to the same user via a console RDP session and then the IP address of the client is successfully returned. With the help of the WTSClientName argument to return customer name always returns the name of correct client that the session is connected via RDP or the customer to view.

  Anyone got any ideas how to retrieve the IP address of the client please? No doubt must be mailed to a community developer, but I can't find really relevant.

  What is happening because of the tunnel from the view, because only in tunnel mode, the RDP control connects to 127.0.0.1 (on the client side) and the socket connection then integrated on the remote side. Session information are filled with the information provided by the RDP client, where the difference.

  We intend to address this issue in a future version of VMware View by providing various information on the client address environment variables available in the RDP session, including the client's real IP, for example:

  ViewClient_Broker_DNS_Name = broker.foo.com

  ViewClient_Broker_Remote_IP_Address = 1.2.3.4

  ViewClient_Broker_Tunneled = false

  ViewClient_Broker_URL =https://broker.foo.com:443

  ViewClient_IP_Address = 5.6.7.8

  ViewClient_LoggedOn_Domainname = FOO

  ViewClient_LoggedOn_Username = user

  ViewClient_Machine_Domain = bar

  ViewClient_Machine_Name = baz

  ViewClient_MAC_Address=00-12-34-56-BE-EF

  ViewClient_Type = Windows

• My old iphone 6s is completely broken, it does not or registry that it is connected when plugged into a computer. I'm able to recover photos from the SIM card with an adapter USB SIM card or through any other way?

  My old iphone 6s is completely broken, it does not or registry that it is connected when plugged into a computer. I'm able to recover photos from the SIM card with an adapter USB SIM card or through any other way? I also do not save anything with AllAccess, icloud, or through my computer as you would with a digital camera.

  The photos are not stored on the sims, sorry.

  You can always try the Recovery Mode, little to lose at this point. If it doesn't, I suggest taking it to an Apple Store for testing.

  Recovery mode:

  Turn off your iOS device.

  Plug charge cable to the computer only (not to the device yet).

  Open iTunes on your computer.

  Hold the button to power on your device and do not let go.

  Plug the cable into the device while keeping the power button.

  Wait for the computer to detect the device and wait that he eat.

  Restore as New first, then restore sauvegardΘ if you wish.

  https://support.Apple.com/en-us/HT201263

• my hp 530notebook, shows the market password? Is it far from solving this problem?

  My computer hp laptop 530, shows the market password? Is it far from solving this problem?

  Hello

  It seems to be a BIOS password problem you are having with your CV.

  I'm sorry, but Microsoft forbids any help given in these Forums for lost or forgotten passwords; which is what your question is.

  Microsoft tips for BIOS password problems are to contact the manufacturer; in this case HP:

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  Or ask in the Forums of HP Support:

  http://h30434.www3.HP.com/

  See you soon.

• Anyone know how to print from XPS Viewer?

  Hi... anyone know how to print from XPS Viewer?

  Original title: XPS Viewer

  Hi AnggiUlfa,

  You should be able, within the XPS Viewer, click file, and then click on print.

  If you need assistance, please let us know any additional details about your question.

  Thank you!

• I have a Nikon D600 and downloading photographs to Lightroom 6.1 all images have their settings far from the truth and is no where near what is shown to the camera, i.e. temp is 3800 and tinted 80 magenta, other parameters are also in. other Nik

  I have a Nikon D600 and downloading photographs to Lightroom 6.1 all images have their settings far from the truth and is no where near what is shown to the camera, i.e. temp is 3800 and tinted 80 magenta, other parameters are also in. other Nikon cameras do not. Everyone knows about this problem?

  Looks like you are applying (accidentally) a "Preset" for these photos. Make sure that there is no preselection specified in the import dialog box, and the first (bottom) in the history of develop does not list a preset.

• Images high resolution that I matter IIN indesign appear in a definition very mlauvaise to the screen and once exported to pdf, they are still quite far from the original. Perhaps to remedy these problems.

  Images high resolution that I import in indesign appear in a very bad definition on-screen and when exported to pdf, they are still quite far from the original. Perhaps to address these problems?

  The bad export quality could be linked to the pre-selection of PFD you have chosen. Some of the presets are designed to re - sample images to make a smaller final PDF

• Create a 1 page site - problems with the last section scrolling too far from scrolling

  I've created a 1 page site that works very well outside the final section, scrolling too far from scrolling. My site consists of a headr pinned, a footer pinned and 4 sections (defined by rectangles - each a 1011 pixels high). I used effects scroll to bring the items in and out.

  The site can be accessed here: Homepage

  The problem is with the contact us section, where you seem to be able to scroll further than the lower part.

  Here is my document, set the parameters:

  

  so my size is set on 4042 (although I've tried it with 4044-4 x 1011 - it makes no difference. When I click on the link to the contact section it seems fine, but I then seem to be able to scroll further down, and this seems dependent on the screen / the browser size. The problem is more pronounced with a smaller screen / browser size in height.

  I have tried everything I can think to do does not scroll beyond what it takes the anchor when I click the link, but whatever I do the problem seems to persist.

  I would welcome any suggestions on this and also General comments on the site. But help with the problem, first please.

  Thank you very much in advance - I'd be happy to publish the file of muse but can't seem to find a way to do it.

  Ian

  Hello iwatts3519,

  just make your master page longer. I don't have to correct the pixel length. This is a test and see option. Here is the corrected file:
  http://files-hh.Hirschen.de/_71isLr3WR8ABYR

• Is it Possible to ignore the prompt from the view of the customer for the selection of pool?

  Customer view has the serverURL - and command line parameters - desktopName that work well to specify the Server View Manager or Office to connect to in a one to one relationship but I would ignore the selection of pool as well. I have thin client Labs in our school libraries that use a pool View. I want to clarify the pool when the user clicks on the icon view rather than motivates students to choose the correct pool in the list. I know I can limit the pools shown to students in making our more granular ad groups and allowing only the groups we want to using each pool, but when you have 16 schools, K - 12 classes and thousands of potential users it becomes a management nightmare. It would be much easier to choose the correct pool for them.

  One of the ways I've found to make a direct link with the desktopName - but if we do lose us the benefits of the management of the pools.

  Any help is very appreciated,

  Thank you

  Ty

  Yes! I tested it: you choose the display name that appears in the list on the client from the view.

• Help me with SQL Query to retrieve data from a view

  Hello Guru,
  
  I need help in my sql query.
  I use SQL TeraData.
  I want an Oracle result in the following form-
  
  Open tickets
  Open months failure / Repair Service s/o improvement request Total general
  2009-01-2 4 4 5 15
  2009-02 1 0 2 3 6
  2009-03 4 1 2 2 9
  Grand Total 7 5 8 10 30
  
  
  I wrote the query as where - TIME_PERIOD, RQST_TYPE_DM and DEMAND_SUMMARY_FCT are the points of view and I extract the data from the views only.
  
  Select NVL (CA. TIME_PERIOD. PERIOD_CD, 'Total') THAT year.
  COUNT (CASE WHEN CA. RQST_TYPE_DM. RQSTTYP_DESC Like '% of Break' THEN 1 END) as BreakFix
  COUNT (CASE WHEN CA. RQST_TYPE_DM. RQSTTYP_DESC as 'N/a', 1 END) by n/a
  COUNT (CASE WHEN CA. RQST_TYPE_DM. RQSTTYP_DESC as 'Improvement' THEN 1 END) accessories
  COUNT (CASE WHEN CA. RQST_TYPE_DM. RQSTTYP_DESC Like '% Service' THEN 1 END) as ServiceRequests
  COUNT (CA. RQST_TYPE_DM. RQSTTYP_DESC) AS grand_total
  FROM CA. TIME_PERIOD, CA. RQST_TYPE_DM, CA. DEMAND_SUMMARY_FCT
  WHERE (CA. DEMAND_SUMMARY_FCT. RQSTTYP_ID = CA. RQST_TYPE_DM. RQSTTYP_ID)
  AND (CASE
  WHEN CA. DEMAND_SUMMARY_FCT. MONTH_ID = CA. TIME_PERIOD. PERIOD_ID, 1
  WHEN {fn concat ({fn concat (SUBSTR (CA. TIME_PERIOD. {(PERIOD_CD, 3, 4),'-')}, SUBSTR (CA. TIME_PERIOD. PERIOD_CD, 7, 2))} BETWEEN ' 2009-01' AND ' 2009-03' THEN 1
  WHEN CA. DEMAND_SUMMARY_FCT. RQSTTYP_ID = '1' then 1
  END) = 1
  GROUP BY ROLLUP (CA. TIME_PERIOD. PERIOD_CD)
  
  After executing the query, I get the following error:
  3076: syntax Error: Data Type 'Time' does not match a defined Type name.
  :( Kindly help me with this and let me know where I'm wrong... Please.

  Messages indicates something wrong with your data... It would seem that the data does not match your format mask.

  Thus, the data or the format mask.

• When shutting down my computer, Windows tries to close with force "Mediacontextnotificationwindow"... any idea on what it is and how to solve this problem?

  Original title: closed to stop forced mediacontextnotificationwindow

  I'm having a problem with a 'program'... ? When shutting down my computer, Windows tries to close with force "Mediacontextnotificationwindow"... any idea on what it is and how to solve this problem?

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the exact message?

  Perform the clean boot may help you resolve this problem.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  a. click Startand then click run.
  b. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  d. When you are prompted, click on restart to restart the computer.

• How can I force a reset of the device?

  My code crushes several modules and also makes changes to the Group module that contains these modules.  I then calls CodeModuleManager.promptForResetIfRequired (), but the BB do not think that a reset is required.  (I also called CodeModuleManager.IsResetRequired (), and he returned false.

  However the new modules I've written are not taking effect until after the BB is reset (I've tested by removing the battery).

  How can I force a reset of the device from my Java code?

  Thank you

  Paul

  Take a look at this thread. You might get an idea.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=13762#M13762

  Concerning

  Bika

• Are there any newspaper in my system or on the server to which data copy from my computer on any external hard drive?

  HII guys,
  Are there any newspaper in my system or on the server that the data that are copy from my computer on any external hard drive?

  No, there isn't, but it might be possible to implement through the audit.

• How can I share my pdf files from my iPhone to my other devices mobile link?

  I have a large collection of PDF files on my iPhone. I want to view them on my iPad and a desktop computer. I thought clicking on the mobile link on I could login to my account on any device and see all files with the content? What I am doing wrong? Thanks in advance

  Hello

  Mobile link is intended through all computers and devices to access recent files (not folders).

  Get your PDF documents, wherever you are. Adobe Mobile link

  Have you tried Adobe Document Cloud for sharing files and folders?

  Acrobat Reader for iOS, please select "Document Cloud" for the location of the file.

  

  You can sign up with the same identifier Adobe to access files and folders in the cloud to Document all of your devices and computers.  (Your files and folders are only visible by you in the account).

  Please let us know if you have any additional questions.