Is it necessary to send the MacBook the battery?
Can I replace the battery in MacBook without sending it to the service?
This depends on your model: If you have a model with a removable that Yes battery. If you have a model with a non-removable battery that you can try but the battery is glued in place and you would be better to send it to the service.
You can look for whether and how you can replace your battery on sites like Ifixit.com and OWC (macsales.com).
I hope this helps!
Our auditor TI wants to save our audit of the log files of the operating system, which can be protected by the root, so that - dba oracle (sys) can not touch it. Then the auditor wanted to send it to our server on another central audit trail machine.
I found this link in google:
The 3rd party software such as kiwis and Splunk mentioned link. Is it necessary to send the audit log to syslog?
Thank you very much
You do not write. Oracle sends audit messages to the syslog facility. It is the syslog daemon which is writing.
Hemant K Collette
I have a Compaq CQ58, who said "Pluuged, to the do not load ' for the last 2 days. The laptop is only 7 months, and before that had a pretty good battery life. I tried to turn it off at night, and leaving load like that, but it makes no difference. I use this laptop for minutng meetings, so this will be a major issue for me.
This model is known for having a battery problem?
You have access to another AC adapter?
You see an icon that indicates the power adapter is connected when it is plugged?
Follow the instructions on this document from HP web. Glance at the bottom of the document to find the section entitled manually calibrate the battery. Be aware that a manual calibration can not solve the problem if the problem is actually due to the power control and switching circuit on the motherboard of your laptop.
If this is the root cause of the problem, you don't have any other option than contact HP and addressing a service engineer on the problem. Which can cause that it is necessary to send the laptop warranty service. When you talk to a customer service engineer make and consult the troubleshooting we have done on the issue here in the forum.
First of all, I apologize for my bad English.
I would like to know the procedure to calibrate the battery of my Satellite c660 - 25 c.
It's pretty easy.
To calibrate the battery, it of necessary to charge the battery until the battery indicator indicates that the battery is fully charged.
Then, unplug the AC adapter and keep the battery discharge until it s completely empty.
Then connect the power adapter and charge the battery again.
This procedure should be repeated two, three times in the line.
I now have a new satellite.
After two weeks, I get a message that there is a battery problem and that the laptop could close unexpectedly. It is recommended to replace the battery.
Is it possible to get support without picking up the phone or go to a store?
Can I get a new stack of mail and send the battery bad back without returning the computer laptop everything?
Thanks for your reply.
> Can I get a new stack of mail and send the battery bad back without returning the computer laptop everything?
In your case, I recommend you contact the Toshiba authorized service partner in your country.
Maybe you don t we had to send the laptop to the ASP, but you will get a new battery in conditions of warranty.
I have a question.
I bought the toshiba Satellite L300-12U a long time ago and I've always used the adapter, even if the battery was still in it. But I heard that it is best to take it out, when you use the adapter. But if I get out the acuumulator if it, the place where the battery belongs to, would be open and the port could be damaged, right? And where should I put the acuumulator?
In the refrigerator? Or is it a dark, cool and dry enough?
BTW, sry because of errors, my English is bad :)
It of not necessary to remove the battery while the laptop is connected to the power adapter.
New age batteries should not be affected.
But I think that the information in the user manual.
Check it simply and read how to handle the laptop.
Welcome and good luck
A few days as my Satellite does not use electricity from the adapter: he wants to only use the battery (so after a few hours, it stops).
Connect and disconnect the power supply when the notebook is on or before restarting, it doesn't change anything (if the battery is always in its place). The power adapter, cable spines,... seems in good conditions and I don't think they have problems because when I remove the battery and restart the laptop, the Satellite finally understands that he must use the power supply and not the battery. Then I can put the battery back in its place and load it... But if I unplug the AC adapter, the circus re - start.
Is power off somewhere? Is there a place where you can choose: "always use the battery and not the power?
I don't think so, it's a motherboard problem?
It is not easy to say why it happens. For me, this looks like an electronic malfunction of power supply.
But it's only my suggestion to be 100% sure that some diagnostic tests are necessary.
But the battery is ok and AC adapter works as well as you suggested.
What you can do is to check your BIOS version and compare it with the BIOS that is available on the page. Is there a newer version, so you can try to update.
Note: Be careful! Bad BIOS and update wrong procedure can damage the laptop.
But if you use the latest BIOS, so I think it must be a hardware malfunction. In this case, the only way to find the bug is to ask the AEP from Toshiba in your country for help.
Hello! When sending mail to a specific contact from my application of Mail of Macbook, I started getting error messages Maildelivery a few weeks ago and discovered at the same time that the mail goes by without problem when sending from iPhone. My Macbook Pro running OSX El Capitan 10.11.5.
The error message I get is:
This message was created automatically by mail delivery software.
A message you sent could not be delivered to one or more of its
beneficiaries. This is a permanent error. The following address(es) failed:
retry timeout exceeded
Reporting-MTA: dns; vie01a-pqmta - at02.mx.upcmail .net
Final beneficiary: rfc822;[email protected]
The error only occurs when the message is sent from Mail on Macbook, NOT sending the iPhone. And only this one contact me. Any ideas? Help would be appreciated since I need to send important emails very frequently. One more thing: this occurs when sending mac.com account as well as the gmail.com account, but both mail on Macbook.
This information should help you get help using iCloud Mail - Apple Support
I recently converted to Eudora 7 to 24.6 TB on Windows. TB seems to work ok except for one question.
I have an email with 5 attachments. These files updated occasionally and I need to return them. With Eudora, I'd do a "send again" and the content of the update files would be attached and sent the email.
TB I go to the sent folder and change as new. When I send the email, it sends the content of the old files not the updated content. I have to remove all attachments, and then tie them again to get the new content. It's very embarrassing.
Is there a way to do the same kind of "send again" only authorized Eudora?
No, it isn't. Eudora stored attachments in a folder and grabbed them if necessary. Thunderbird encodes at the time wherever they are attached, so there is the file on disk to update.
Seriously consider what store files in a files on internet services and by using the links to the files in your mail.
Google Reader automatically synchronize files with your PC and allow you to send links to the internet copies in your emails.
I know that this is not a forum for programming, but I have problems with firefox while trying to send file entries via IFRAME.
This is my code
<form id="popup_form_archivo" method="post" action="'subir_imagen.php" target="wk_iframe" enctype="multipart/form-data"> <input name="accion" value="subirImagen" type="hidden" /> <input name="wkimg" type="file" id="popup_prompt_archivo" /> </form> <iframe name="wk_iframe" id="wk_iframe" src="about:blank"></iframe>
I'll send the form entries to the iframe called wk_iframe, I get the hidden entrance data, but not the entry from the file...
I don't know why this is happening?, because he used to work.
Works well in safarin, Opera, Chrome, but not Firefox
I must say that I love firefox and that's what I'm here...
Please help me...
I noticed an apostrophe in action = "" ' subir_imagen.php '. " Is it necessary to cite?
It should still work as noted in the docs.
Any errors in the Web Console (Firefox/tools > Web Developer;) CTRL + SHIFT + K) or browser Console?
A good place to ask for advice on web development is the forum mozillaZine 'Web Standards Development/evangelism'.
Aid to this forum are better informed on issues related to web development.
You must register on mozillaZine forum site to post in this forum.
I use my MacBook Air as a desktop computer. Should I leave the charger plugged all the time or should I drain the battery and then recharge? What is the best for the battery?
Keep the computer plugged in whenever possible.
If you keep the computer always connected, make sure that at least twice a month
Run it on battery until battery charge level falls to about 40-50%.
Please don't completely discharge the battery. Discharge the battery completely will reduce wear and tear on the battery.
For more information:
Section: To optimize the battery life
Citing at the bottom of the linked article.
"The question is often asked:" should I disconnect my laptop from the mains when not in service? Under normal circumstances it should not be necessary because as soon as the lithium-ion battery is full, a properly functioning charger will stop the load and load the pad will only engage when the battery voltage drops to a low level. Most of the users do not remove AC power, and this practice is safe. »
Hi, the battery must be replaced on my MacBook Pro of retina, but I don't want to send it and pick up within 2 weeks. They will replace when I'm in the store? The guarantee also ended 2 weeks ago that I'd be able to show them, and they would be understanding and do it for free? Personally, I think that £125 for a battery is charges and it's a shame that it's over 2 weeks ago. Thank you!
well - it depends on the discrection of one you get. I'd be inclined to say "no, they can't do it for free. As for how long that will take, well. again, you will need to enter and take a go-genius bar. What I can say is to be nice and polite, and maybe you could get lucky
I've had this for awhile now. When I click on my battery, it says "replace soon".
What should I do about it? Replace the battery myself or send it? I don't have a warranty on it more.
Is it to Apple to get it replaced. My Macbook Air came with the same message several months ago. I took a Genius Bar appointment, left for a few hours while I did some shopping and came back to pick it up. I checked it before I left, and everything was good to go since then.
It was $ 136 with tax, but the peace of mind and knowing that my Mac is back in perfect condition, it was well worth it for me. My Mac is out of warranty for several years.
Unable to send the message from my account to my other in Outlook Express 6What is a Pop3 account? IMAP? Hotmail? Can I assume that it used to work? If it worked until recently, follow these steps.Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.In Windows XP, the files of user OE (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.With OE closed, find the DBX files for the items in the Outbox and sent and delete them. New ones will be created automatically when you open OE.After you're done, followed by compacting your folders manually while working * off * and do it often.Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.General precautions for Outlook Express:Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.Information on the maximum size of the .dbx files that are used by Outlook Express:
http://support.Microsoft.com/?kbid=903095Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
http://www.oehelp.com/OETips.aspx#3Why you don't need your anti-virus to scan your email
http://thundercloud.NET/infoave/tutorials/email-scanning/index.htmNote that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.Compact often as specified above.And backup often.Outlook Express Quick Backup (OEQB Freeware)
It just started doing this morning... I had Outlook Express for YEARS!
You have apparent dbx file corruption.
Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.
Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
With OE closed, find the DBX files for the items in the Outbox and sent and delete them. New ones will be created automatically when you open OE.
After you're done, followed by compacting your folders manually while working * off * and do it often.
Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
General precautions for Outlook Express:
Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
Information on the maximum size of the .dbx files that are used by Outlook Express:
Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
Why you don't need your anti-virus to scan your email
Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.
Compact often as specified above.
And backup often.
Outlook Express Quick Backup (OEQB Freeware)
Maybe you are looking for
Original title: canon mp 287 printerI recently bought a canon mp 287 printer in chiang mai, Thailand. I used the download provided by canon disk to install the drivers, unfortunately it's in the thai language, which I can't read. I uninstalled the pr
My sidebar for my desk top was still on the bottom, now it's on the right side, I don't like it here, how can I move this back down? I don't know if I clicked on something that moved by an accident or if my computer is going to crash, not sure, then
Hello. I want to just install Windows 2003 Std R2 Sp2 to PE 1850 DRAC 4 / i media distance characteristic. For some reason, the Setup program fails. I have connected the virtual media to the Windows Server 2003 iso image, I start PE 1850 from this im
Hi all! I can see the serial numbers of FPS connected to the leafs and thorns, but I can´t to see serial numbers connected to APICs... Thanks in advance!
I uninstalled CD player and I'm trying to reinstall the drive as XI It to request a serial number and I have not one please notify