Is it normal for my AirPort Extreme to run his fan on and off every 2 ' minutes throughout the day?

Similar Questions

• Lost the power supply for my airport extreme!

  I lost my power cable for my airport extreme (House move!) where can I get a new one?  Online?  Thank you.

  Is your AirPort Extreme in shape as a 'tour', or you have one of the old versions "flat or square"?

  If you have the version "tower", a standard power cord "of eight" of any place of e-procurement would work very well. Radio Shack stores usually have in stock... but they probably won't have white.  Take the airport along to test fit in the store.

  If you have the old version of flat or square, you will need to purchase food and the power cord as a unit. Better go online for this.

  http://www.Amazon.com/genuine-EADP-20BB-supply-Airport-extreme/DP/B00AAQ3JE8

• Airport Extreme cannot connect with KoboAura ereader and Beloit airplay 12 speaker

  Airport Extreme cannot connect to KoboAura ereader and a speaker of 12 airplay of Beloit.

  If this is not the case, already, try to use a network name that does not contain any special characters or use spaces. For example, if you use "this network of MY #is ^ ss NETw0rk," change to something like: thisismynetwork.

  See if these two devices can connect now. They can?

• Hi, I answered no to the question on the registration of password for a spesific site. I changed my mind and would like Firefox to save the password. How to re-enable password for a spesific site saver?

  Hi, I answered no to the question on the registration of password for a spesific site. I changed my mind and would like Firefox to save the password. How to re-enable password for a spesific site saver?

  Check the list of exceptions to your Firefox password manager and check if your site is there or not?

  • http://KB.mozillazine.org/User_name_and_password_not_remembered#Password_Manager_settings

• My computer hangs for 15-20 seconds many times throughout the day, suggestions to fix this?

  It seems no matter what I do on the computer, it will freeze for 10-15 seconds at a time, then run again the OK for a bit, then gel to the top.  This happens continuously throughout the day.  Any suggestions on what could happen?  I ran checks on the computer, but all system controls came out OK.

  It could be a sub-process or application that runs in the background
  and taking all the CPU resources.

  To find and view what could be the problem, try Process Explorer:
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx
  SysInternals Forums: http://forum.sysinternals.com/

  Worth reading: the process system CPU spikes
  http://blogs.technet.com/markrussinovich/archive/2008/04/07/3031251.aspx

  Once you have Process Explorer installed and running:
  In the task bar, select view and check:
  'Show the process tree' and the options 'display the lower pane '.
  Move the cursor of your mouse over any column in the right pane and
  Make a right click and check the following boxes:
  "Command line" and "Version".
  Then expand the process named "Explorer" (click the plus sign +)
  In the left named "CPU" column, look for any high CPU usage.
  Then click on the CPU column to sort processes by CPU usage %
  (Highest to lowest).

  You can also hover and check any spike point or up/down in the chart of the CPU.

  Move the cursor of the mouse on any process,
  You should see a pop-up window with some detailed info.
  Then the mouse on the process using most or all the CPU %.
  Then click on this process to select,
  Now that it is highlighted, right click and select the options listed:
  "Online search".
  This should bring that out there on the web about this process.
  You can also double-click any process to open a more detailed
  "Properties" window

  Note: some entries such as explore, System/Services and Svchost
  To be expand to view details (sup process),
  in this case, click on the + to the left of the entrance.

  Another method when you use Process Explorer
  is to double click on the graph just below the menu bar.
  This will open the "System information" window, which has a larger screen
  of all the three graphs. Move your mouse over any Picot in the
  Graphic of the use of the CPU to see what process/application or service is the cause
  earworm.

  Another available tool is: RAMMap
  http://TechNet.Microsoft.com/en-us/Sysinternals/ff700229.aspx

  J W Stuart: http://www.pagestart.com

• How the PopUp open for every 15 minutes until the user saves data

  Hi all
  
  I'm working on an application where I need to open a popup for every 15 minutes until the user saves data and stop after users register data. I'm not able to get the idea on how it could be done. Please post some views in which it could be done.
  
  Thanks in advance.

  Hello
  an alternative is the uncommittedDataWarning property is one out of the box functionality, but don t has setup time.

  https://blogs.Oracle.com/Shay/entry/warning_of_uncommitted_unsaved_changes

  If not, you can use an af:poll in combination with a pop-up message

• Is there an update for ios10 AirPort Extreme

  My AirPort Extreme has always extended throughout the House - now does not work.  Is there some sort of update?

  If there is no update the firmware it would appear automatically. Open Airport utility. If an update is present, it will inform you.

• Airport Extreme 7,7,7 drop connection and internet high speed

  My Airport Extreme (6th generation) have had the serious problems of the internet, as said in the title I had problems with my internet connection, I checked if that was the problem of the modem to the beginning (D3.0 Ubee) which was provided by my Internet, Charter provider.

  I've had Airport Extreme for almost a year to 2 years now and since then, I had no problem with my internet until 7.7.7 update came.

  I updated my firmware and this is where my random internet connection problem started.

  My current contract with the Charter are their 60 Mbps (download speed) and 4 Mbps (download speed), during the first days since I've updated 7.7.7 connections was fine and then my internet has started to decline since a means 50-60 Mbps (download speed) to 0.1 - 2 mb/s (download speed), my download speed has remained a constant 3-4 MB/s (download speed). I have tried and used Opendns several times, he really did nothing.

  I tried to turn off both modem and Airport extreme for a couple of minutes and turn on their return, but he does nothing and just refers to an extremely slow speed.

  The only way I found to fix my problem to get my internet to 0.1 - 2 mb/s (download speed) back to its original state, I find myself to be a restore return settings on the Airport Extreme with my Airport utility by default whenever the problem returns (which contributes to a certain degree as it gets my back up to 50 internet-60 MB/s) then he drops down again).

  I wanted to restore to 7.7.6 or the latest version of previous firmware before 7.7.7 (not too sure what version of firmware, it was) but I can't find how to spend my Airport extreme to my Airport utility.

  My question is what could I do to fix this problem if the decommissioning of my extreme (I need instructions with this too), change some settings, get rid of the * thing and get a new router, or am I stuck resetting to the parameter by default whenever she acts upward.

  I use windows 10 for my laptop

  Thank you for your time

  Unfortunately, the first question that you encountered is the AirPort for Windows utility has not been updated since Windows 7. In addition, it is not supported for use with the 802.11ac latest versions of airport base stations. Then downgrade to earlier versions of the firmware for base station can be difficult, unless you can get hold of a Mac or iOS device.

  If you are ready to test Windows 10, here are the steps to do:

  • Open the AirPort for Windows utility.
  • Select the base and then station in the utility menu bar, select the access point > Download Firmware...
  • Click on the Download Version dialog box, where the current version of the firmware is listed.
  • You should now see a list of the firmware versions that are available.
  • Click on the one you want to get off at.
  • Choose either 'continue' to continue with the downgrade, OR click 'Cancel' If you decide not to do so.
  • If you choose to continue, allow the firmware to be downloaded, installed and the base station to turn.

• How can reset my PW necessarily when I can't access the email his publicist too and I don't remember all the Info for the form-help?

  Hi, I really need to reset the PW on my Gamertag * Lathyrus TSG * who was on my original Xbox. My Original Xbox died a few years back and recently I bought a new Xbox. I download on my new Xbox. The Email attached to my Gamertag is dead, it was my email former Internet service provider and they changed Roadrunner/Comcast to Time Warner Cable. I have the old ID Xbox and Xbox novelty and serial numbers as well as the former flow used to pay for Xbox Live Gold card. I tried several times to use the form help to reset my PW but a Xbox Live rep believes that I can't meet the minimum percentage of correct information to get a link sent. I would really like this old Gamertag back.

  Hello

  Check out the following link to reset the password for Xbox LIVE and check if that helps.

  http://support.Xbox.com/en-in/billing-and-subscriptions/account-management/manage-Live-ID

  If the problem persists then, post your question on support Xbox forums about the issue.

  http://forums.Xbox.com/

• Audio synchronized beating. And then a few minutes in the video he is out of sync for the rest of the video.

  I use a CX Activeon (think to Go Pro) with my Nexus 6 record @320kbs audio MP3. I try to sync the videos beating in the beginning of the video. After that I imported the files, first thing I can't synchronize automatically with PR. So I try to get it as close as possible with a manual synchronization.  After I have made modifications as flipping the video to the right orientation and synchronize the audio. I can still see that 1 or 2 minutes in the video, the audio is is more synchronized, but the first part is... What I am doing wrong. or is - something with the phone, record audio.

  I use win10 with all of the CC.

  TL:DR

  Activeon CX not shot in constant cadence, action camera use Handbreak to fix audio/video synchronization.

  Thus,.

  I found a few things with the help of you guys thank you.

  The camera indeed don't tire not in a constant rate although there is a setting for that I turn on.

  Put a file of 20 min Handbreak and now audio is only slightly off comme.1 seconds of video throughout the moment instead of gradually worsen. After all, which I am fine with it is just dashcam footage.

  Also got a new mount so the camera is no longer in the water-resistant case and the audio sounds fine to new just dashcam footage.

  Thank you

• How can I show summary for every 15 minutes using the DATE data type

  This is probably an easy question, but the answer escapes me...
  
  I'm writing a SQL report that displays totals for each period of 15 minutes. I know you can do something like this for every minute:
  
  Select to_char (import_date, 'DD-MM-YYYY HH24'),
  Count (*) from
  package_ingest
  Group of to_char (import_date, 'DD-MM-YYYY HH24')
  
  But how can I change this query to get me every 15 minutes?
  
  Any feedback is greatly apprecaited!
  
  Thank you
  
  ADK-

  Also;

  WITH sample_data AS (
     SELECT to_date ('03-09-2009 14:05:05','MM-DD-YYYY HH24:MI:SS') import_date FROM dual UNION ALL
     SELECT to_date ('03-09-2009 14:17:17','MM-DD-YYYY HH24:MI:SS') FROM dual UNION ALL
     SELECT to_date ('03-09-2009 14:24:24','MM-DD-YYYY HH24:MI:SS') FROM dual UNION ALL
     SELECT to_date ('03-09-2009 14:29:29','MM-DD-YYYY HH24:MI:SS') FROM dual UNION ALL
     SELECT to_date ('03-09-2009 14:33:33','MM-DD-YYYY HH24:MI:SS') FROM dual UNION ALL
     SELECT to_date ('03-09-2009 14:44:44','MM-DD-YYYY HH24:MI:SS') FROM dual UNION ALL
     SELECT to_date ('03-09-2009 14:55:55','MM-DD-YYYY HH24:MI:SS') FROM dual)
  SELECT
     to_char(import_date,'MM-DD-YYYY HH24:') ||
     to_char(floor(to_number(to_char(import_date,'MI'))/15)*15, 'FM00') interval_15,
     COUNT(*)
  FROM sample_data
  GROUP BY
     to_char(import_date,'MM-DD-YYYY HH24:') ||
     to_char(floor(to_number(to_char(import_date,'MI'))/15)*15, 'FM00')
  ORDER BY 1;
  
  INTERVAL_15         COUNT(*)
  ----------------- ----------
  03-09-2009 14:00           1
  03-09-2009 14:15           3
  03-09-2009 14:30           2
  03-09-2009 14:45           1
  

• Connection Officejet 8500 for Apple AirPort Extreme

  I have on two devices.  The airport has a network running running.  I plugged the Officejet 8500 at the airport with a network cable.  When you open AirPort Utility, he does not see the printer.  When you use the printer menu, I was not able to find the right method of connection to the network.

  No, you can use (and use) Ethernet.  It's just that Airport utility didn't report it because it is not plugged into the USB port, which is good.

  Now that the printer is connected to your network, download and install the latest version of the software for your printer from the "Support & drivers" link at the top of this page.

• Can I have 2 Airport Extreme with running in a single wired network DHCP server

  Hello friends,

  Just a teenager from the windows world crawling as a child in the MAC world.

  I'm curious to know if we can have 2 extreme airport, acting as 2 DHCP servers in the same local network. I really doubt if it is possible, but still want to have Advisor by experts. I am considering a wired LAN. If possible, please help me understand how this can be done in detail.

  Thank you.

  In fact, you can. The key is to assign different DHCP scopes for each base station in the same IP address space.

  For example, you could assign the range 10.0.1.2 through 10.0.1.99 to a base station and have the other on: 10.0.1.100 via 10.0.1.200.

  You set the DHCP scope or range using AirPort Utility, as follows:

  • Run the AirPort Utility.
  • Select the base and then station, select change.
  • Select the network tab.
  • Select Network Options...
  • The range is set with the option "IPv4 DHCP Range".

  

  But the question would be why would you?

• Airport Extreme - poor score from Consumer Reports

  In the notes of June 2016 of routers by Consumer Reports, the Apple Airport Extreme was ranked 7th of 14 rated routers.

  Linksys (EA8500) AC260 ranked 1st with an overall Score of 89

  The Apple Airport Extreme ME918LL/A 7th place with an overall score of only 67 & wasn't 1 of 4 routers "recommended" by Consumer Reports.

  I have currently 2 5th generation Apple Airport extreme with the 2nd 1 put in place as an 'extension' of the 1st (hard wired).

  Am currently in the market for an Apple Airport Extreme 3rd - also to be used as an 'extension' of the 1st (also to be wired).

  I had years of service with my current 2 extremes without any major problems.

  But, I must say, this weak side causes me to rethink the purchase of one 3rd extreme.

  In addition to an Apple 6 more belonging to both myself and my wife and one old iPad 3 belonging to my wife, I don't have any other products Apple.  I use Dell computers & have never owned a Mac.

  The qUESTIONs ARE:

  Should I worry about buying the new Apple Airport Extreme Base Station?

  The Appreciation of Linksys #1 is $60 more ($240) that extreme already expensive ($180).

  Is - it's worth the extra $$$?

  Different brands of routers can be 'mixed' and used as in "extensions" of a 5th generation Apple Airport Extreme Base Station?

  Should I worry about buying the new Apple Airport Extreme Base Station?

  Perhaps.  The current product was introduced more than 3 years ago, and Apple did not of any material changes since that time. Because it usually takes about a year to develop a new product, the technology in the "current" AirPort Extreme is probably 4 years old.

  Your next question might be... Apple plans to introduce new models soon?  The answer is that we do not know.

  The Appreciation of Linksys #1 is $60 more ($240) that extreme already expensive ($180).

  Is - it's worth the extra $$$?

  I have not used this model, but another user might have a few comments.

  Different brands of routers can be 'mixed' and used as in "extensions" of a 5th generation Apple Airport Extreme Base Station?

  Yes and no.

  Yes, if the routers are only connected together using a connection wired Ethernet cable.

  Not in general, if you ask to have different brands "extend" the signal of wireless connection to other brands

• An external HD w / 6th gen Airport Extreme can be used for NAS?

  I ' d like converted my Mac home theater use more, and I thought about options for NAS.» My current kit includes an old 802.11 g Express, so of course I will upgrade to a new extreme for bandwidth extra. I see the extreme has a full range of ports at the back, so can I attach an external hard drive of quality to the extreme and end up with a good - although budget - NAS?

  can I attach an external hard drive of quality to the extreme and end up with a good - although budget - NAS?

  Yes, if you are willing to accept extremely slow performance compared to a normal NAS.  The reason is that the USB port on the AirPort Extreme is only USB 2.0, and due to the limitations of speed processor on AirPort Extreme, the port is working at only half the speed of a USB 2.0 on a computer.

  So, at best, the 'budget' NAS can run about one third to half the speed of NAS normal. This might be OK for backups and other data that you may not access on a normal basis, but it would not be recommended to try to locate a picture of 'work' library, video library or other type of audio/video media on the USB key which will be available on a regular basis.

  Another issue to consider is that the USB 2.0 on the AirPort Extreme is in power, then you will probably need to use a USB powered with AirPort Extreme hub.

  Finally, most of the USB hard drives are now USB 3.0... and the port on the AirPort Extreme is only USB 2.0.  In theory, USB 3.0 is backward compatible with USB 2.0... but the theory does not always true in practice.

  If you already have a USB 3.0 drive, Apple does allow a privilege to return 14 days for the purchase of new AirPort Extreme, so if you still wish to proceed, you can try things for a week or two to see how well... or, even if... .they will work.