Is it possible/easy to disassemble the printer of 7550 photosmart for repair?

I have a Photosmart 7550 printer and blocking the printhead. I have removed all the papers and tray paper and don't see any jam. Is it possible to take the printer part to fix the print head?

Sorry, with this printer, you won't be able to take the printhead and clean it yourself.

Tags: HP Printers

Similar Questions

  • What is the maximum distance that the printer wireless HP Photosmart 7510, you can be

    We lack to set up the printer wireless HP Photosmart 7510 as our it Department and would like to know the largest reliable remote, you can have your office of him to make it work.

    Hello

    As mentioned above, there are many factors, no one can say. Under current free air according to your router, it may be from 30 m to 100 m

    Kind regards.

  • How to get around the problem of printing from the printer driver Adobe PDF for Notepad instead of a PDF Document?

    How to get around the problem of printing from the printer driver Adobe PDF for Notepad instead of a PDF Document? I tried the tool 'Repair Acrobat Installation' and other problems listed on the forums, but nothing worked. In the Notepad document is the following ' % [ProductName: distill] % X937B6DD4 not found, using the mail service.» X07BB154E not found, by using the messaging service. % [Page: 1] %% % [Page: 2] % % [Page: 3] % % [Page: 4] % % [Page: 5] % X4EEBB81F not found, by using the messaging service. %% [Error: invalidfont;] OffendingCommand: show; ErrorInfo: CharOffsets ss %% [Flushing: rest of work (end of file) will be ignored] %% %% [warning: PostScript error.] No PDF file produced. ] %%."

    The log file indicates that the Distiller cannot find fonts and besides, fonts with very weird names. (These names can often appear when printing from an application, WPF such as Internet Explorer 9, 10 or 11.)

    My best guess is that the problem is with the options set for the PostScript of PDF from Adobe printer driver instance. Exit the application you were initially impression since. Open the Adobe PDF printer Properties . Then click the Advanced tab. Then click on the button default printing . This should produce a significant window default print Adobe PDF is already opened in the Adobe PDF settings tab. On this tab, there is a checkbox to rely on system only fonts; do not use fonts in the document. If this box is checked, uncheck it and press apply , then OK. Then go to the general tab and press the button Preferences giving the window entitled Adobe PDF printing preferences. Again once, look for the box to rely on system only fonts; do not use document fonts. If this box is checked, uncheck it and press apply , then OK. Then back in the Adobe PDF Properties dialog box main, press apply (if it is enabled), and then click OK. Re-enter the app you were original print and try to print again. Let us know if that fixes the problem.

    -Dov

    PS: Unfortunately, rely on fonts system only turned on by default, causing problems for many applications. I always recommend turning it off (i.e., unchecking it)!

  • Is there a cable that has a configuration of PIN for the printer and a USB for PC connector?

    I recently bought a HP Pavilion p6620f desktop PC to replace my HP Media Center PC m1270n desktop computer, which has stopped working.  I have a HP OfficeJet K60xi all in one printer fax scanner copier that has been the cable connected to the old PC.  The end of the cable does not match any of the places to go on the new PC.  Can you please tell me how to connect the printer to the new PC?   Is there a cable that has a configuration of PIN for the printer and a USB for PC connector?

    Please see: installation of the product with the USB cable and using the driver from Windows Update or the driver located in the Windows 7 operating system and HP USB 2.0 cable to the printer.

  • How do I disassemble the printer so I can work on it properly without breaking?

    Need to disassemble the chassis work printer without damaging it. Is there any diagram that I can look if I'll be able to do this with damage them the machine?

    Your request is beyond the intended scope of this forum.

    You can describe a problem you are experiencing with your printer in terms of software, installation and configuration. We will do our best to help you with that.

    Disassembly of printers is not something in the forum.

  • persistent fault message on the printer to HP photosmart 7200

    I get the message "0x6100004c general Printer Error, refer to the printer Documentation."

    When I go into settings it is said, "there is a problem with the printer or the ink system.  "Turn the printer off, then on.  I did it several times without success.

    The ink levels are fine.

    I am able to fax.

    Help.

    Hi MillVally,

    I am pleased that you have found a video to help you through the steps.

    I recommend you to call HP.  If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

    As mentioned, the HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; guarantee cheque.

    Even if it is out of warranty, give them a call, it is always interesting to see if there is anything they can offer.

  • HP 6700 Assistant what function the printer option? Looking for a help file.

    I just istalled an Office jet 6700, one of the shortcuts on my desktop is labeled HP Officejet 6700.

    When I click it I get four options, HP Printer Wizard, set preferences, see what's printing and customize your printer.

    Outside the HP printer assistant, they do what they say.

    I click the button Wizard from the printer and nothing happens, but I think I need the Printer Wizard to access the help file.

    My Panel said aid has been loaded, but I can't seem to find it.

    I've uninstalled and reinstalled the device three times now.

    One of the ideas please?

    George Humphries

    running windows 7 64 bit printer is on an ethernet connection

    Hi George,.

    Open start > programs > HP > HP Officejet 6700 and follow the Uninstall option.

    Then install the latest version below, be sure not to use the original CD that include older software:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109007-2&cc=us&DLC=en&LC=en&OS=4063&product=5058338&sw_lang=

    Now open the HP software and check any change.

    Shlomi

  • Want 7640: Must be able to use the print and scan doctor for each print job to get printing to work

    After works without any problem for several months, the printer now shows an error message whenever I try to print. I have to run the doctor print and scan so that the printer to function. The first time this has happened, he told me I have to uninstall and reinstall the program, I did. Since then, only the works of doctor print and scan running, but he running for each print job is not acceptable!

    Hi @Doug18,

    Thank you for joining the Forums of HP Support!

    I see that you are unable to print, except if you first run the PSDR. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    I understand that you have received the order to uninstall and reinstall the software that you have. When you now run the PSDR, she says you? I need to know the results (of the error messages, patches, etc.)?

    In the meantime, try the steps in these guides:

    Hope that answers your question. Please reply to this message with the results. Thank you for posting!

  • Document to the printer does not cancel for what I can print other things

    My printer HP Deskjet 1000 has a document which continues to view "delete", but I'm unable to cancel when I right click under the State in the settings. Therefore, I am unable to print something again or try again to print the original document. I was able to cancel other documents I tried to print, but not this one. He repeats to me just "delete...: but won't Cancel."  Please help if you can, I really need to use the printer.  Thank you.

    Hello

    I think you need to delete the queue. For Windows, try it please:

    Hold down the Windows key and press R.
    from the run window, type services.msc and press to enter.
    If the computer asks you to Admin, you have to accept that,
    regarder watch down to the print spooler service, right-click and select Properties
    Click the Stop button,
    Go to C:\Windows\System32\Spool\printers
    delete the job inside this folder
    restart the machine.

    Kind regards.

  • Aligning the print cartridge HP Photosmart C7280 Print failed - prints in everything but black

    When I print, it comes out in pink/red.

    I bought all new ink cartridges and done a master reset and I still get the error that does not have the print cartridge alignment.

    Hello

    Please try the step and then try alignment process listed below.

    on the screen of the printer.

    1. Press the key SETUP (key), then
    2. Then press TOOLS,
    3. Press the CLEAN print head / cartridge.

    Make sure that the ink cartridges should be at least 25% full.

    Note: you need to repeat the above steps 2 - 3 times.

    If issue still persits, it could be a defective black cartridge or print head. In which case you could call the HP Technical Support for assistance.

    If you are in the United States, the toll free # is 1-800-474-6836.

    If you're not in the United States, and then connect to www.hp.com , bottom left it is an icon of the world map, click it and then select the region that you belong to, which would then provide the support options for you for this region.

  • Reduction of the print size HP Photosmart C4500 series page

    I have a HP Photosmart C4500 series and it is not printing to fit the entire page. The page is reduced in size (from about a third of the page) and some words are cut off. This only happens when I print a Web page. The print preview shows she will be printed to fit the page, but it never does. I use a Macbook Pro and I print wireless. I don't have the CD to reinstall the printer with me. Help?

    Thank you!

    Hi @afc13,

    Welcome to the HP Forums!

    I understand that your HP Photosmart c4500 series prints a page of size reduced on your Mac, and I'm happy to help you!

    I recommend the following:

    1. Reset the printing system. OS X Mavericks: reset the printing system.
    2. Verify and repair disk permissions. 12.x disk utility: repair disk permissions.

    Let's start with these two steps, and then we'll go from there!

  • Printers under the original user have the printer properties grayed out for new users, even if they are members of the Administrators group

    Windows 7 Pro 64 bit (and 32-bit) Setup on the domain.
    The domain users group is added to the local Administrators group.
    Printers are installed under the first domain user.  These aren't the printers shared, but local usb printers or printers attached to the tcpip port and driver installed.
    All right.
    Users in the second domain is connected to the computer.  They are part of the local Administrators group, because they are part of the domain users group.
    They're going to look at the properties of the printer and almost everything is grayed out.
    Why?  Because they are part of the local Administrators group, they should not have full access?
    I look at security for printers and I don't see the first person in the list because it was created with their profile, but I also see local administrators that this new user belongs to a group.  Now I can take everyone and increase the rights and then log in as a new person and they can then change the properties, but why can't new users "who are admins the" does not alter the properties?
    Thanks in advance for your help.

    Hi Gsaunders,

    If the computer is connected to the domain network then the question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

    http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro&filter=AllTypes&sort=lastpostdesc

    It will be useful.

  • iPhone 6 have been saved to the icloud before sending it for repair but now cannot find relief in icloud to restore

    My screen iphone6 cracked this week before sending for repair, so I made a backup to icloud.  But now that I have the new phone (they replaced instead of repaired) I can't find the backup on the phone or through my iTunes account.  I'm looking for the backup?  It had all my contacts, music... everything!

    Thank you.

    The replacement phone may be necessary to update before it will see your backup. You cannot restore a backup made with a new version of the iOS on a device that is running an earlier version. Set up as new, updated to iOS, then delete it and try to restore the backup again.

    FYI: Music is NOT part of the backup.

  • Impossible to print on the printer hp deskjet 3420 for windows 7 driver

    I have an HP deskjet 3420 printer I am trying to set up as a local printer to my PC. HP site doesn't have any driver for this printer and says to use deskjet 3600. When I look at my available printer drivers I can't find a 3600 printer driver. Also, went into windows update as the support instructions say and update could not find a driver. Tried to download a driver windows 7 for a deskjet 3600 and it say instructions to use windows update, which had not worked for me. I tried several other print drivers and have no luck with one of those I chose. any help appreciated

    thought about it not need to go far thanks

  • Example: Deskjet 3050 - J610: printer removes items in the print queue

    Please see problem posted on June 9, 2016 and thread support. Sorry, I don't know how to go on this subject but the problem that I've marked as being solved is no longer is. It it is possible to mark as resolved and to reopen the thread please let me know how and I would be glade to do. Essentially sent items to the queue printing are deleted until they can print. They show in the print queue and then are marked "delete." I ran Print ahd doctor Scan of my desktop PC, and he says that everything is OK with the printer. I can see what the ink levels in the printer, and it printed on the printer succcessfully diagnostic information when asked to do so. I can see all of the information on the model of the printer, the serial number etc. so it seems that the PC can see the printer. But it will not print emails or Word documents - while he has done it before. Problem seems to have started when I tried to scan a document in and it would not. Printer is connected wireless and has an IP address, it doesn't seem to be the firewall attached - I disabled the Anti Virus software and it will not print. It runs the Windows firewall good that cause issues? I disabled that too, but it did not help. I followed the intstructions given by Gemini02 a HP Support Agent and it seemed to solve the problem but it only did it once and then continued to remove items from the print queue. I also tried to turn off the printer and then the PC, left for a while and then restarted them and that seemed to work. He already showed the printer as offline and printing and scanning doctor fixed that but when I ran it but still it only printed once and then returned to the deletion of items in the print queue. Grateful for any advice anyone can offer please.

    Hi @Moonfire24,

    Welcome to the HP Forums!

    I saw your posts on how your HP Deskjet 3050 - J610 printer keeps deleting items in the queue in Windows Vista. And I'm happy to help you!

    Please try the steps in this guide, Print Jobs stuck in the queue (Windows), let me know what happens! (Even if the title of the guide may not correspond to your question, I think that the solutions will help.)

    If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

    Hope this guide helps!

Maybe you are looking for

  • Music on an Audio CD burning

    I have a problem, burning files to a CD in Audio format.  Everything works as expected until it cancels the burn during the first song.  All ideas

  • Windows Boot Camp icon shows not boot disk

    Hello guys! I just installed Windows 7 Pro 64-bit edition. I used the wizard Bootcamp, and everything seems to have been installed correctly. I did not use any Wizard part 3rd NTFS to format the partition. I just followed the steps with the Bootcamp

  • Fehlermeldung bei round-Fkt im Formelblock

    Hallo, in einem Formelblock möchte ich die ankommenden auf drei Nachkommastellen Runde (DIAdem 11.1) values. Refer habe ich einen Formelblock eingefugt in dem ich following formal eingegeben habe: Round (D, 3) Dear erhalte ich following Fehlermeldung

  • BIOS password help

    Folio 13-2000 Disabled system [59472296]

  • Read from worksheet only read 1st column

    Hi all I use "Worksheet reading" to read a line from a file at a time (I'll use the data to each line for some calculations on a basis per line).  However, the program is only showing me the value of the cell in the first column of each row.  I tried