Is it possible - installation of a virtual machine with Server 2008 on a disc and use the other drive for storage

Similar Questions

• Virtual machines, run extremely slow when the console is consulted 2 virtual machines Windows Server 2008 64-bit, Windows Server 2003 32-bit, 2 VMWare for virtual machine

  I'm in a difficult situtaition here.  I am the daily contact with a new client.  My linux guy, who is also my boss who is very busy, asked me to do some research trying to find answers for what's not on this server. We have a dual Quad Core 2.5 Ghz Lenovo server with 10 GB of ram.  2 500 GB hard drives are Raid 1.  We run Virtual Server VMWare 2 on a Debian with Gnome installation as a user interface for the side of things Linux.  Grub is the boot loader. There are two virtual machines running on the server.  The one machine that serves as a domain controller is a Windows SBS 2008 Server 64 bit, and the secondary machine has no responsibility domain.  The second machine is a Windows Server 2003 32-bit.  the 10 GB of ram 6 GB is allocated to the SBS server and 4 GB to the 2003 server.

  The problem I am running into is that everything is so slow, especially if I connect remotely to do any sort of administration on the network.  Some examples of issues I've noticed is that as soon as I log on the server via Remote Desktop SBS console management Windows Server spike to 80-95% CPU usage and it will not stop unless I close the management console.  Another instance is that if I open Backup Exec 12.5 on the SBS server it will kill the speed of the processor as well.  Long story short, there are a lot of machine to do what we need to do, but something is not configured right and non of us know what it is.  Another point to note is that the server has been in production for about 3 weeks, and the server seemed to have locked up just twice.  My professional guess is that over time, some chose thing is eating causing the crash of the memory.

  Sorry I do not have much technical insight on this topic, but this is the best I have to offer.  Any questions you all have, I'll ask my people and see if I can answer, but I could really use your help here.

  Thank you in advance,

  Heath

  2 things:

  1 you really need hard drives more than 2 in a RAID 1 for proper performance under load. More disks the better. Although I don't think that's what your problem is, he'll probably be the problem Next you will do.

  2. I don't know exactly where the configuration file is on your box of Debian for VMware Server, but you should consider adding the following options in the configuration file (on windows, it's the vmware 'config.ini'):

  prefvmx.minVmMemPct = "100".

  MemTrimRate = 0

  sched.mem.pshare.Enable = "FALSE".

  mainMem.useNamedFile = "FALSE".

  If you do some research, you can read about what these options (the largest is the memory page sharing - it should only be left on if you have a bunch of similar virtual machines running on the same box, that you don't have.) I honestly know why this is on by default, he kills the CPU when virtual machines are running different operating systems). These are the options that I now use standard in VMware Server deployments, with huge performance increases after you have added the. Just give a try.

  Edit: Also make sure that you have installed in your virtual machines VMware tools.

  Dimitri Rodis

  Integrita Systems LLC

  http://www.integritasystems.com

• Is it possible under the EULA to have several virtual machines on a single physical hard disk while using the same OS license or do I need a separate license for each virtual computer?

  I have several programs that are not compatible with my 64 bit Windows 7 operating system.  I would like to run each different software under another virtual machine of VMWare (5 packs of different software programs and 5 different virtual machines of Windows XP).  These would all be installed on your laptop.  I can use the same license of Windows XP for each virtual machine, or do I need a separate XP license for each (different XP in case 5 licenses)?

  It is lifted directly from my EULA:

  1. GRANT OF LICENSE.

  The manufacturer that you grant the following rights, provided that

  comply you with all terms and conditions of this EULA:

  1.1 installation and use.  You may install, use, access,

  display and run one copy of the SOFTWARE on

  THE COMPUTER.  The SOFTWARE may not be used

  by more than two 2-processor both on the

  COMPUTER, unless a greater number is

  indicated on the certificate of authenticity.
  Then...
  This means that as long as you are running two or more instances of XP at the same TIME, you agree? Or does this mean that, after you install once, you have reached your limit?
  I imagine that most people (including those who are running Microsoft!) will say that the second interpretation is correct.
  However...
  If this is the case, anyone their hard drive as a backup to clone strategy would violate the EULA!

• Discover the virtual machine with VMware View 4.5.  "That underlies the virtual machine is not available.

  I have installed the following to an ESX 4.1 server:

  -VMware View connection server (Server 2008 R2 Ent)

  -V - Center (Server 2003 Std)

  Install the VMware Client with Local Mode 4.5 to a laptop

  Installed VMware Agent to a Windows XP and Win7 is a guest vm on the ESX Server.

  I can connet with success both of these machines.

  When I try to extract either of these machines, I get the error message after 2% saying, "underlying this desktop virtual machine is unavailable.

  

  Can someone tell what to do to solve this problem?  I can't find anything so far for this error.

  Thank you

  Did you install and configure a forwarding server?

  -Mike

• Built-in features of virtual machine Windows Server 2008

  4.0 ESX or ESXi 4.0 supports virtual machine built-in capability in Windows Server 2008?

  No, Hyper-V can be passed through a guest.

• Question about the installation of XP with an OEM disc and using the number of CoA HP

  Hello

  I have a DC5100SFF that I bought refurbished last year, and it came not with all drives. It comes with windows XP pro and has the CoA sticker with the activation code.  It also has "HP" written on it.

  I thought to wipe the hard drive and reinstall XP Pro in the near future.  I have an an OEM Windows XP Pro disc, but it is not specific to HP. The CoA sticker has been removed from the new drive (and the package is not open), but there is nothing on the packaging to indicate what OEM brand (its likely it was another popular provider).

  My question is, if I install XP from this disc, he on my machine can use the number on the certificate of authenticity to activate it, or do I need to use a specific disc HP XP Pro?

  Thank you

  Hello:

  David is correct. You don't have the product key if you use recovery discs.

  However, I believe that you can still get the recovery disc for your Business from HP desktop PC.

  Just dial 1-800-334-5144 and inform the representative of customer services that you need a set of quick restore CD.

  You will need to provide the model number and serial number.

  A game costs $10.00.

  As for your other question... If someone has already used the product key XP pro on the sticker on your PC, you can use any disk XP Pro OEM installation and enter the product key.

  I do it all the time. I used OEM Dell on HP PC disks. Never had a problem.

  Paul

• Cloning of virtual machines with snapshots

  Is it possible to take a virtual machine with snapshots, and then copy the individual vmdk files that make up a set of 5 shots manually and create a new virtual machine, so that all of the snapshots is all kept - and if it works what are the possible caviats / traps?  When you use just the cloning tool, it includes all snapshots.

  Hi TheVMinator,

  As mentioned in the kb, it is not recommended. But if you stop your virtual machine, copy the complete folder and then save the new VMX, it should work.

  The only problem that you have is a corruption of the sequence of disk. In this case, you can try to fix it or make another copy of the original VM. But you will not damage your original machine.

  Good luck.

  Concerning

  Franck

• How to clone a virtual machine with the drive?

  Hello

  Previously, I used VMware Workstation and has a mastery of "clone". Now I use the reader and I would like to clone my current VM and there is no special orders. Simply copy the directory would probably not there a lot of information such as DNS name, etc. that are likely to be changed. Is it possible to clone a virtual machine with player or do I Workstation?

  Many thanks in advance,

  Nicolas

  In my computer a full clone is nothing more then is not a copy that was made unique in the process and the players of VMware capacity but there is nothing stopping you from manually making a copy and then manually by making the changes to make it unique.

• Memory of the virtual machine in Windows 2008 32-bit Aignesberger.Software.website.Watcher.2010.busines

  Dear all,

  I installed the virtual machine with Windows 2008 32 Bit Standard Edition. Compact, his oar was 2 GB at this time there, everything was fine, I increased the ram to 4 GB. Now my Easerver 6.3.1 got crashed and pursuant to the original agreement we also reinstalled/reconfigured EA server, but it is always showing 2048 MB of memory instead of 4 GB.

  
  

  2554-11-08 13:09:17.733 INFO wire-34 after USER ID = Adeelme:cms
  Type of Message 2554-11-08 13:09:17.733 INFO wire-34 = Debug
  Virtual memory use Java ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] INFO-2554-11-08 13:10:00.046: 19% (94/264/494 MB)
  Virtual memory use 2554-11-08 13:10:00.046 process of ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] INFO: 98% (2016/2047 MB)
  Virtual memory use Java ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] 13:11:00.051 INFO-2554-11-08: 21% (104/264/494 MB)
  Virtual memory use 2554-11-08 13:11:00.051 process of ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] INFO: 98% (2016/2047 MB)
  2554-11-08 13:11:15.000 INFO component/method name Thread-34 [JaguarServer] = n_app_controler/of_getapplication

  Type of Message 2554-11-08 13:11:18.631 INFO wire-34 = Debug
  Virtual memory use Java ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] INFO-2554-11-08 13:12:00.052: 14% (74/264/494 MB)
  Virtual memory use 2554-11-08 13:12:00.052 process of ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] INFO: 98% (2016/2047 MB)
  

  Thank you

  Adeel Imtiaz

  Yes - you can
  but that will make your VM very slow

  set
  prefvmx.minVmMemPct = "50".

  or less - allowing you to approve the RAM
  Set this parameter in your config.ini file

• Is it possible to transfer everything to a virtual hard disk that is smaller on a virtual hard disk that is larger in VMWare Workstation, using the same virtual machine?

  Hello

  I was wondering if it is possible to transfer everything to a virtual hard disk that is smaller on a virtual hard disk that is larger in VMWare Workstation, using the same virtual machine? In the affirmative, please could someone advise me on how to do it. Also utility management and disk transfer can be used in virtual machines to do this?

  Thank you very much

  Tim Auluck

  I'm not sure what exactly you are asking. Can you please clarify!

  Basically you can resize a virtual drive or add a second virtual disk to a virtual machine and transfer/copy files. You can also resize the virtual disk using VMware Converter for example.

  André

• Is it possible to migrate a virtual machine between vcenter servers programmatically?

  Hi all

  My question is quite simple:

  -Is it possible to migrate a virtual machine between vcenter servers programmatically?

  Let's say we have two data centers:

  vcenter1

  -vm1

  -vm2

  vcenter2

  -vm3

  Is it possible to migrate vms between vcenter2 and vcenter1 programmatically? (or vice versa)?

  Also, I'm assuming that the appropriate VLAN and data warehouses across the different vcenters!

  Thank you

  Luis

  It is not possible, vMotion or migration live is in an instance of vCenter, it cannot be covered through two even if you have the data store accessible both vCenters and sets of the host. At best, you can unregister the virtual machine of vCenter 1 host and re-save as on vCenter 2 host, but once again, it is while the virtual machine is turned off.

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• How is it possible to clone a virtual machine cluster when data warehouses not presented in source and destination

  I did not know that on ESX 3.5, in order to afin de vivre live clone a virtual machine from one ESX host to another, source and destination stores had to be available. However, I'm currently cloning a virtual machine to a host in a datacenter and cluster to one host in a different data center, but the destination store is not available at the source host and visa versa.

  How is that possible?  This is a new feature of vSphere?

  That seems to work on the console port. See this thread: http://communities.vmware.com/message/1475721#1475721

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Is it possible to migrate a virtual machine to thin provisioned disk?

  I have about 100 VM in a resource pool dedicated to called "Archive"... Well, archiving.  These virtual machines are currently powered off but every now and then we will get pulled for a developer to work on (they are for the most part, the virtual computer with client customizations if they are changed about once a year).  I'm quickly running out of space on this SAN but all discs are thick provisioned and using the disc is maybe 20-30% on average.  Also, I want to move them to a new large store of data I created for them.

  Of course, I choose Migrate & gt; Change store data & gt; Thin provision in vSphere Format and I'm done.  However, it would be nice to not do this 100 times.

  Move-VM does not seem to be capable of this, and I have not been able to find a workaround.  Is there a way to convert the thin and then perhaps Move-VM? Or I'll just on this all wrong.

  Thank you!

  You can try this script?

  He's moving vms to data store 'EMCSAN:Datastore01' trying to change the format of storage for Thin

  $dsView = Get-Datastore -Name "EMCSAN:Datastore01" | Get-View -Property Name
  
  Get-VM  | % {
  $vmView = $_ | Get-View -Property Name
  
  $spec = New-Object VMware.Vim.VirtualMachineRelocateSpec
  $spec.datastore =  $dsView.MoRef
  $spec.transform = "sparse"
  
  $vmView.RelocateVM($spec, $null)
  }
  

  / Yasen

• Run a virtual machine with a graphical interface on a host without GUI

  Hallo

  I want to install a simple Windows 7 for some tasks bit where I need Windows on my server Ubuntu 14.04. This server has no GUI (no X) and should have any.

  Already, I've installed the virtual Windows machine on my workstation to 12, so I would just copy the vmdk on my linux server and run it, maybe put something in the vmx file.

  But I do not know is that it's all means possible.

  Is it?

  Is there any player or any application for ubuntu VMware when there is no X system (on ubuntu), where I can run virtual machines with GUI inside?

  Maybe another virtualization tool, vmware not?

  I think that this exact question already somewhere, but I haven't found much question where comments lacking a GUI, but not the host.

  I need a guest-gui on a host without gui (where I have only the terminal).

  So maybe it's not possible at all, so please tell me a 'no', so I won't expect more

  Thank you to

  Frank

  EDIT: oh, this seems to be another question unanswered it is too difficult or too stupid?

  Hi Frank,.

  Now that would be stupid, having a text Installer, and then not allow the virtual machine to run. I think it should work, but you must pass the nogui option.

  Vmrun help:

  beginning

  (Supported only on teams

  Workstation.)

  Starts a virtual machine (.vmx file) or team (file .vmtm).

  The default graphical user interface option starts the machine in an interactive way,

  What is necessary to display a user interface of VMware.

  Nogui option suppresses the user interface,

  including start-up, to allow dialog box not interactive

  writing scripts.

  [gui | nogui]

  refer to the manual of vmrun: VIX API Documentation

  Edit: hmm... Now, I see that you have already tried the nogui option. You might be able to install the package libxinerama, but he could hang out in a lot of dependencies.

  FWIW, vSphere is pretty much what you describe a system not GUI to run GUI invited, so it shouldn't be a problem at all.

  Unfortunately, I don't have a host linux without X installed handy here, so can't test here without the implementation of a server without head myself.

  You can also try to run the client via the command vmware:

  VMware Workstation 12 Pro Documentation Center

  --

  Wil

• Create a virtual machine with the physical RAM total?

  I want to virtualize ESXi 4 on my MacBook Pro. However, I have 2 GB of RAM and ESXi 4 requires a minimum of 2 GB.

  I posted in the community of ESXi (is it possible to virtualize ESXi 4 with less than 2 GB of RAM?) and there is a solution for using ESXi with less RAM, but the problem is that I first need to run the installation with 2 GB.

  Basically, I tried to create a virtual machine with 2 GB, but the maximum I can use is 1840MB. Is it something that I do with Fusion to increase this limit? I understand that I am under a host operating system and requiring too little RAM, but just to get through the ESXi installation isn't it possible to push the VM of RAM to 2 GB and the host what OS increase the pagefile to deal with the lack of RAM?

  Any help would be appreciated!

  Thank you

  You may be able to edit the .vmx file and change the memsize option either 2048 or more. The merger is able to start a virtual machine with more memory that the host, just UI prevents common users to exceed the limits of security in general.

  I'm not quite sure what would happen if the VM actually tries to use all of the memory. If all goes well, it will be just talk and run slowly. Of course, the worst case are that it crashes.