Is it possible to adjust the brightness of my screen?

Is it possible to adjust the brightness of my screen?  If so, how?

If it's a desktop monitor, there should be buttons on the monitor to do this. I found this a useful tool, you can set a different brightness for the display of day and night. However, you can also just use it to quickly adjust the brightness at any time.
 
f.Lux

Tags: Windows

Similar Questions

  • I cannot adjust the brightness of my screen

    I can't adjust the brightness of my screen...
    Please help me

    Hello

    Try to use Recovery Manager to reinstall your particular graphics driver (AMD, Nvidia, Intel etc.) - the procedure to use the Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.

    Recovery Manager - Windows 8.

    Recovery Manager - Windows 7

    Recovery Manager - Windows Vista

    After reinstalling, restart the laptop.

    Kind regards

    DP - K

  • I am not able to adjust the brightness of my screen, Lenovo P500

    I just upgraded my system to Windows 8.1. And I stuck with this sun screen. I couldn't change the brightness of the display using the keys. I also tried to adjust the brightness on the control panel power Plan, but nothing works.

    I had the same problem before too, so I used to roll back the driver Intel HD, and the problem used to be solved. But after the upgrade of the system, is there no option for Driver up. So, how can I adjust the brightness of my screen again?

    razendra wrote:

    Uninstalled the driver with delete option, installed the new version!

    Good news, it's screen is bright now!

    Bad news, it's screen is bright now!

    I couldn't adjust the brightness!

    Try to go to bios. Use the function keys to adjust brightness. Can you make the adjustment?

  • Cannot adjust the brightness of my screen. It is located at full speed and my dough goes super fast.

    My Sony Vaio w/Windows 7 recently crushed and Geek Squad put in a new hard drive. Everything works fine except that I can no longer adjust the brightness on my screen. It is located at full speed and my dough goes super fast. Please help me solve this problem. Thank you!! :) - AdamH

    Original title: help! AAARRRGG

    They installed drivers for devices from Windows 7 for your make and model. If this is not the case, then go to the support web site factory and download Windows 7 drivers to a folder on your PC and then first install the drivers for the card mother/chipset, followed by USB, SATA, LAN, Audio and all other pilots.

    Sony: http://esupport.sony.com/perl/select-system.pl

    Another way to find your computer manufacturer's support Web site.
    http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

    Also to check the graphics card Sony or download site of manufacture for the latest Windows 7 drivers for your card.
    ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
    NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

    J W Stuart: http://www.pagestart.com

  • HP Notebook: Why can't adjust the brightness of my screen on my

    I have a HP laptop. I want to adjust the brightness because it was too bright for the darkroom, in which I was. I tried to use the F2 and F3 keys to turn down the brightness and I tried to adjust parameters and control panal but the brightness is not adjust when I move upwards or downwards. I tried to turn off my computer and restarted it, but I still cannot adjust the brightness. Help!

    Hello:

    Yes that's fine.

    Here are the graphics drivers that you need for the W10...

    This package provides the graphics driver AMD/Intel switchable high definition (HD) for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a mode of graphics to save energy (normally used under the power of the battery) and a high-performance graphics mode.

    File name: sp72066.exe

  • Why can't I adjust the brightness of my screen on my

    I have a HP Envy dv7 Notebook PC. He recently just downloaded the new companion of HP and I tried to adjust the brightness because it was too bright for the darkroom, in which I was. I tried to use the F2 and F3 keys to turn down the brightness and I tried to adjust parameters and control panal but the brightness is not adjust when I move upwards or downwards. I tried to turn off my computer and restarted it, but I still cannot adjust the brightness. Help!

    missrodgers92 wrote:

    I use Windows 8 and my product number is C2N67UA #ABA

    Hello again!

    Try to reinstall the graphics driver of your laptop.  Here is a link.

    I would like to know the result and have a wonderful day.

  • I cannot adjust the brightness of my screen on my dell laptop 1510

    I installed windows 7 me and now when I try to adjust the brightness with the fn key or thrown windows Mobility Center, or power options it does not work, I tried many different things and it still does not work

    I just installed the driver nividia nb8m-gs for windows vista from the website of dell http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=08W&l=en&s=bsdv&ServiceTag=91QKVF1&SystemID=VOS_N_1510&os=WLH&osl=en&catid=&impid= and so far it works like a champ thanks to God, I can even adjust brightness threw the fn key!

  • It is not possible to change the brightness of my screen!

    For some reason any my keys F2 and F3 to change the brightness of my screen stopped working. How can I fix?

    Hello

    Try to download and reinstall the graphics driver amd on the following link.

    http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72115.exe

    When reinstalling, restart the laptop.

    Kind regards

    DP - K

  • How can I adjust the brightness and contrast of an object that is part of a vector?

    I have edited one (text & symbols of color, brightness, contrast, etc.) file, generated from its original file, LOGO.eps LOGO.tif, . Now, I am trying to edit the EPS to match the TIFF. I got regarding the extraction of the color of the text in the TIFF file and applying it to the text in the EPS file. My problem is that I can not change the brightness and contrast of the symbol in the logo. Is it possible to adjust the brightness and contrast of an object that is part of a vector? I need make a darker symbol and I tried change > change colors > saturate and adjusting the intensity to 100, but it does not darken. And I can't really spend extra money on plug-ins like Phantasm cs. Help, please.

    I may be as simple as adding a transparent overlay with some gradients.

    It can be incredibly complex and be better done in photoshop.

    without seeing it, it is very difficult to help more.

    even a clipped sample can help.

    Choose the logo...

    (comment out) What is the point of a Logo, no one is allowed to see?

  • How to adjust the brightness in the module book

    I have created a book with photos 75 or so using Lightroom 5.3. Everything is ok and everything done - but I forgot that my screen is dressed so that I can see things clearly. On simple images, I increase the brightness and contrast in the print module before saving on a single file to print. I don't want to do cela for all 75 images at a time. is it possible to adjust the brightness/contrast in the book module type of a lot?

    If not, which includes print adjustment equal to in the develop module? For example, I found through tests, if I go with + 67 brightness and contrast + 51 in the print module, it compensates for any photo that I developed with my screen dressed in the develop module.

    This forum is really about the cloud, only not on the use of individual programs

    Once your program downloads and installs without error, you need the program forum

    If you start the http://forums.adobe.com/index.jspa Forums Index

    You will be able to select a forum for the specific Adobe products you use

    Click on the symbol "arrow down" on the right (where it says all THE FORUMS) to open the drop-down list and scroll

    http://forums.Adobe.com/community/Lightroom

  • Satellite A300 - 21 c - impossible to adjust the brightness of the screen

    Hello

    I am not able to adjust the brightness of my screen on my Satellite A300 - 21 c - control panel-> the menu options of power does not give me the opportunity to do, and my Fn keys do not work either (can't adjust the brightness).

    The operating system is Win. XP Pro - SP2

    Any help would be greatly appreciated. Thank you!

    Hello

    You can adjust the brightness of the screen using Toshiba Power Saver? With this tool, I can set the brightness of the screen for Macintosh (AC adapter) and normal (battery). I like it a lot because I can also put more options and you can download it on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    For the FN keys on your laptop, you need the tools Toshiba you can find on the site of Toshiba, too.

    Welcome them

  • cannot adjust the brightness of the screen on T530

    I can't adjust the brightness of my screen using the power manager. Update to the latest version of the ThinkVantage Communications utility did not help the cause. I can't make the screen more bright or dimmer, and it's driving me crazy. Any advice would be great!

    Do you use a Lenovo provided Intel graphics driver or an Intel processor has provided a?

  • Pavilion 15-r004ne: cannot adjust the brightness of the display

    I m using the Pavilion 15-r004ne on a windows 64-bit OS 8.1 and I cannot adjust the brightness of my screen. I tried to adjust by shortcut keys F2 and F3, tried adjusting via the mobility Center, tried through Control Panel and so on, but no response until now. It shows the little pop-up when I press the keys. But nothing has changed, the brightness of the display remains the same. in order to get solution soon.

    Thank you for your support. It didn't work either. I solved the problem of roll back the driver and update again.

  • Cannot adjust the brightness after installing Windows 10

    Hello. I have a Dell XPS 15 L521X.   Recently updated to Windows 10 and I can adjust is no longer my brightness upwards or downwards.

    Now the screen is quite low.  I'd say about 30-40% brightness.  10 widows I found about 5 different places to adjust your brightness and I made sure all of them have been set to 100%.  I have my power plan to high performance and I went into advanced settings and turned off Adaptive brightness and made sure that the brightness of the screen the two Dim brightness set to 100% on battery & are plugged.  Rebooted and still dim.

    My question is, on Dell laptops, Windows has full access to the brightness control?  Or Dell replaces Windows with their software customized for the display settings?   When I bought this laptop in 2012, the software, at the time, was called Dell QuickSet.  What is the responsible application of brightness of the screen control?  And is it necessary?

    Thank you

    Mike

    I am also having this same problem. My brightness has been set at max after update and it hurts my eyes. I did it... Control Panel > Device Manager > graphics cards > Intel HD Graphics 4000 > pilot > Update Driver > Browse my computer > let me pick. Choose Microsoft Basic graphics card.

    After doing this, my problem was solved, and I was able to adjust the brightness of my screen again. BUT if you play games on your laptop, it will cause display problems in your game.

  • Possible bug: Lightroom 5.7 now adjusts the brightness after cloning as a white backdrop. Ideas?

    I just found this: work on a larger series of images, shot on a white background.

    It is a mobile facility so sometimes the backdrop covers the whole frame.

    So after I do my settings to my select I use the spot removal tool to clone in some parts of the background if necessary...

    So far so good. But Lightroom then auto adjusts the brightness and contrast of...

    No idea what's going on... Restart LR and the computer did not any changes.

    I'm on a Mac 10.10.3

    Pointers?

    Best,

    D.

    The beach of the adjusted values of highlights, shadows, whites, blacks, clarity (at least) all depend on image content so your cloning on a dark area left replaces the range of values of the image and changes as well as cursors.

    The difference is very accentuated between the cloned image and uncloned if clarity is equal to 0 and black to-100 with all the remains the same that the DNG downloaded, where all parameters are identical between the two images and the background being cloned to white is the only difference in the parameters and settings, so the Visual difference is how LR applied 5 toning of the sliders.

    The problem is that unwanted background on the left is darker than the subject so it's existence or not determines what means 'black '.  It cloning of 'Black' changes that she will fix the details of the subject and affects how the highlights, shadows, white, black and clarity sliders work.

    I think that toning using tone instead of these 5 sliders below curve contrast will not have this problem and I think that cropping away rather than cloning in the background, then using the 5 sliders will not the problem.

    The essential is that cloning apparently happens before you tone up in the pipeline of the image and how these 5 sliders work is designed so that you will see this difference and is not a bug.

    --

    For the reference of someone else reading this, here's the default settings has been made in the two DNG as downloaded before changing Black =-100 and clarity = 0 for the side-by-side, supra.

Maybe you are looking for

  • DreamColor LP2480zx does not recognize the USB for calibration

    Hello I have a DreamColor LP2480zx, which does not recognize the USB connection to the computer during calibration.  I have my eye HP connected through this monitor, so I know the connection and the cable is good and mouse, keyboard.  My setup is lik

  • Adapter AC WiFi for W510

    Hello!Can someone tell me if there is a Wifi card that can use the 802.11ac standard and is supported by W510? Internal or expresscard maybe? see you soon, Thomsonicus

  • I need to be able to "kickstart/wake up" source Clip +... Anyone experienced this?

    Hello. Has anyone of you experienced this? Is this a known error that sometimes occurs within this product? When I bought the Clip + everything worked as expected. For a few weeks. But now I can't turn it on anymore. Any buttons I press, it is not "w

  • Red points to the bottom of the page

    I have a LaserJet Pro 200 color MPF 276nw several months.  Recently on almost every print job prints spaced red dots on an inch of distance to the bottom of the page vertically about 2/3 of the way through the page. I downloaded and installed the lat

  • userPassword length

    HelloI know that maybe that's a simple question but not able to find any document for this.I want to know what is the max char I have to attribute "userPassword"? We run ODSEE 11.1.1.7.2 version on SLES11.If you know a link to document for the above