Is it possible to call the function Document disinfect since a JavaScript?

Similar Questions

• Is it possible to call the function in the module through function of interface component

  Hello

  I see this in the livedocs.

  "In general, if you want to set properties on controls in the module using external values, you must create the variables that may be related. Then, you set the values of these variables in the methods implemented in the interface. If you try to set properties of the controls of the module directly using the external values, controls may not be instantiated by the time the module is loaded and the attempt to set the properties may fail. »

  I have a component in a module. I have to call this component of the interface function funcion. That is to say my main application call the function of interface, and that interface funcion must call funcion of the component. Is this possible. I get error that the element is null, if I try this. Is it possible to do so.

  Thanks in advance.

  Hi, yes I got your problem now when I have your code.

  See it here:

  MOD = modInfo.factory.create (like TestInterface);
  var el: IVisualElement = modInfo.factory.create () as IVisualElement;
  this.addElement (el);

  It won't - you create 2 separate instances of the module, which you create - 'el' and the other a not - "mod".

  It should look like this:

  var el: IVisualElement = modInfo.factory.create () as IVisualElement;
  Note: I usually use var el: Module = modInfo.factory.create () like Module; Does not need at least for the moment to cast as IVisualElement but I know that it is not bad, I read in some articles before getting if I remember correct it does not give access to some methods, but not sure.

  MOD = el like TestInterface;

  addElement (el);

  First, you create the instance of the module with the factory.create (), and then cast you to the interface.

  F

• Call the function in LabView from a DLL, and then access the global variable of DLL

  I've created a DLL in LabWindows with a function and structure.  I want to call the function from LabView and then access the overall structure.  I am able to call the function in the DLL with a "call library function node" and has access to the return value, but I can't understand how to access the overall structure.  The structure is declared in the header DLL with __declspec (dllimport) struct parameters file.

  Is it possible to access this structure without using the library of network variables?

  My guess is that you need two bytes of padding after "in_out" and another to two bytes of padding after "anin."  The reason being that ints are 4 bytes, and most of them C compilers will align on 4-byte boundaries.  The struct will naturally start to such a limit (in fact, in Windows, it will probably start to an 8 byte boundary).  If you then count bytes in your structure, you are 70 byte after "in_out."  70 is not divisible by 4, so you need 2 bytes more to reach the next 4 byte boundary.  You can also you could reorganize your struct so that "anin" follows "in_out" and this is probably the best option if it won't cause you other problems.

  Unlike most C compilers, LabVIEW compressed structures as closely as possible, without filling.  I don't know enough about the history of LabVIEW and internal parts to explain the reasons and to do this performance penalty, but, as choice of LabVIEW "endianness", it is probably a remnant of the first versions of LabVIEW that were running on the Mac.

  If for some reason you want to force your C struct to match package LabVIEW, you can use the #pragma pack (x) directive, but I wouldn't recommend that here because you can control the C and LabVIEW.

  EDIT: in the cases where it was not clear, add padding to your cluster of LabVIEW, insert appropriate size or items at the place desired in the cluster.

• G8D94PA #ACJ: is it possible to change the function of the FN keys?

  Hello

  I sometimes use windows 7 32-bit due to my software dependency. in some software I have to use fn keys (F1 to F12) frequently with the combination of other keys. It is possible to enable the functionality of the fn keys as from now on if I have to use F5, so I use FN + F5 combination. So in this software I have to use F2 to F7 & I have to press CTRL + ALT + FN + F2 to F7.

  Please share any solution...

  Hello

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the Bios ( f10 ) option, and then change the figure in the document at the following link.

  http://support.HP.com/us-en/document/c02035108

  Kind regards

  DP - K

• Calling the functions to Iscript

  Hello world

  I hope you all do well. I just want to confirm one thing, is it possible to call functions in Iscript? If so please guide me. Right now I have an Iscript file in hundreds of lines of code. I want to break these lines of code in different functions and call the functions where they needed.

  Thank you

  Take a look at WEBLIB_PORTAL. PORTAL_ADMIN. FieldFormula

  Function: IScript_AdminSiblingNav()

  There are several calls to another position within the IScript.

• Call the function to another tool

  Hi all

  We have used a tool to multiple functions, can I possible to call specific function in the new tool.

  Example:

  Tool 1 (existing)

  Function 1

  2 function

  Function 3

  Function 4

  Tool 2 (new)

  Calling the function (function 1 + 1 tool)

  Thanks in advance,

  Selva

  Possible Yes... use

  #includepath "path of the folder script your tool 1.

  #include "... / outil1 script name.jsx.

• MuseJSAssert: Error calling the function switch: TypeError: 'undefined' is not a function (assessment ')

  Help, how do I fix this bug?

  MuseJSAssert: Error calling the function switch: TypeError: 'undefined' is not a function (assessment ' $('#u69').registerPositionScrollEffect ({"enterSpeedY": 1, "exitSpeedY": "offset" 0,:-0.04999 999999999005})')

  and I also have this error:

  MuseJSAssert: Error calling the function switch: TypeError: 'undefined' is not a function (assessment '$('.browser_width').toBrowserWidth ()')

  Help please help

  The most common cause of JavaScript errors on a page of Muse is missing from server or .js files or other files on the server, not all human beings of the backup of files .js version of Muse. If you use an external FTP client, you must re - download all the files and folders every time that a site is implemented using an updated version of Muse (since the code generated by changes of the Muse of liberation to free to improve page load performance, support new features, new versions of browsers or devices (, etc. of the address, etc.).

  The second most often the cause of errors JavaScript on a page Muse is bug embed code and/or include code that is in conflict with the JavaScript code used by Muse. Plan to temporarily remove your embed code to see if the problem goes away and so isolate the cause.

  And, of course, it is possible, a JavaScript error is caused by a bug in Muse or a bug in an update of the newly introduced browser, but frankly, given the level of tests that are placed in a statement of those who tend to be very rare and when they do occur, they are usually very quickly addressed by an update of Muse.

• How to identify which switch in the Panel called the function?

  Here I have some 192 switches and 192 leds corresponding to each switch,

  If a switch is on(say 10th) consequence (10th) led should light up.

  I want to use the same function for all pairs of led switch.

  all I could do was to check the switch in a loop and then set the individual leads, but I find it very little effective way to do it.

  int switchOnOff (int, int int event control panel CVICALLBACK,
  void * callbackData, int eventData1, int eventData2) is the function.

  None of these arguments I can use it to extract what (the unique id for this turnout) switch called the function so that I can pass corresponding led glow?

  It occurred to me now that the table is not necessary at all: you can simply assign to each switch the corresponding ID led the callbackData, so that the code is even simpler than my previous:

  // At panel load:
  SetCtrlAttribute (panelHandle, PANEL_SWITCH1, ATTR_CALLBACK_DATA, (void *)PANEL_LED1);
  ...
  SetCtrlAttribute (panelHandle, PANEL_SWITCH192, ATTR_CALLBACK_DATA, (void *)PANEL_LED192);
  
  // In the control callback
  GetCtrlVal (panel, control, &sts);
  SetCtrlVal (panel, (int)callbackData, sts);
  

  To answer your last question, "Management Board" means immediately after the call to LoadPanel.

• Is it possible to call the api native playbook of QT creator?

  Hello

  I'm currently learning the playbook with Qt development.

  For this I use Qt creator to develop the specific application of the user interface.

  I want to know that is it possible to call the api natives of the application that is, I do in QT creator.

  As I want to include a video and audio player in my application.

  It is easier in the native api for use of this feature.

  In QT, I found it in the QT mobility and with phonon, but two of them are not supported on Playbook.

  So please guide me with my problem.

  Thanks in advance.

  bskania.

  Sorry, drop the. at the end: http://qt-project.org/wiki/QNX

  I never used the BB expected build but it's a bit old so it would be logical that you must use Q_OS_QNX vs Q_OS_BLACKBERRY. You can post the results of compilation using Q_OS_QNX?

• Call the function in the UI part without head

  I develop some app with no head.

  When I change the code in the head part and build - launch. But nothing changes in the part without a head.

  I have another solution call the function in the UI part headless. But whatever it is called.

  Please help me solution?

  The part without head of a long walk without head application is still running in the background. It will not update until you stop the part without a head.

  To stop the game without leading the race, you have three choices:
  (1) build increment in the bar file version - descriptor.xml. This will force the part without head to stop and restart with the new code.

  (2) use the monitor of the device to manually stop your application from running. Then, new launch and your game without head will run the new code.

  3) to implement your own way without a head, like a button that would send a personalized call to headless with (say) action "com.myDomain.myAppName.SHUTDOWN" and when headless receive this invocation, operate you this line:
  BB::application::instance()-> quit()
  This will make the part without head stop, then you run and your part without head will take place the new code.

  I prefer the #3 method, but if you do, don't forget to hide this feature before releasing to the public.

• How to call the function "remote address book look up" J2ME app?

  We develop J2ME on BB and call the function "search of remote address book." any API we can use? Thank you very much!

  You can use BlackBerryContactList J2ME

• Call the function QML from C++ (simple question)

  I guess that's a pretty easy question but I'm a bit new apart from development c ++ of BB10. I have a QML file in the assets folder called Functions.qml which has only onne inside functions.

  import bb.cascades 1.3
  
  Page {
      objectName: "funct"
      function printStat() {
          console.log("hello");
      }
  }
  

  In one of the functions in applicationui.cpp there is a function called resendNotification() (you may know this code from the model of the app without head)

  void ApplicationUI::resendNotification()
  {
      InvokeRequest request;
      request.setTarget("com.example.TestNotificationService");
      request.setAction("com.example.TestNotificationService.RESET");
      m_invokeManager->invoke(request);    // --> call the printStat() function of Functions.qml file
      Application::instance()->minimize();
  }
  

  My question is, before you minimize the app How can I call the function printStat() of the qml file? I have always developed my apps in QML so never had to deal with c ++. Should be easy enough to call a function well.

  Thank you in advance!

  first step is to find the object by ObjectName using findChild, usually from your element root (navigationPane).
  example:
  NAV-> findChild ("myTextField")

  If you have the object of another source that is fine too, of course.

  second step is to use QMetaObject::invokeMethod with the object and the name of the method.
  Example:
  QMetaObject::invokeMethod (container, "setText", Q_ARG (QVariant, text));

• call the function onCreationCompleted c ++ in qml

  I currently have a problem with the c function call ++ QML.

  Œuvres of normal calls. But when I call a function in onCreationCompleted, he cannot access qml object on the page.

  For example:

  {Page}

  onCreationComplete:

  {myFunction() ;}

  Button {}

  ojbectName: "button1".

  }

  }

  MyFunc access using findChild button1.

  But this return 0 x 0, means the button does not exist.

  So how do I access button1 in c ++ to what page is loaded?

  I have posted from a phone, so sorry if there is no error.

  Look, we can't access the qml object when the page is created (we call it in onCreationCompleted). I bypassed by calling the function after navigationpane.push.

• MuseJSAssert: Error calling the function switch: TypeError: undefined is not an object (evaluation of "a.rules")

  I have this error on my Web site every time that I go. It disappears when I refresh three times.

  "MuseJSAssert: error calling the function switch: TypeError: undefined is not an object (evaluation of"a.rules").

  I downloaded the site with Filezila.

  Please help, what's wrong here?

  Thank you

  Hi Barbara,

  The question began to happen after you downloaded using the latest version of Muse?

  If so, can you try to remove the old files of the web server and re-upload using Muse?

  Kind regards

  Akshay

• JavaScript exception: error calling the function switch: TypeError: undefined is not an object (evaluation "jQuery.browser.msie") - HOW I ME get RID OF THIS

  

  Hello

  I get these errors a lot lately on my sites of muse - it happens when I rename pages or change the navigation menu - I tried several times and this isn't to do with external plugins - this is a bug of muse - appears when my loading sites and also when you select a page in the navigation bar - in the past for a single page websites - I just copy the contents in memory - remove the rebonding and page - everything and it works again - of course, I don't want to do that with Web sites with multiple pages - in the past, anyone in the forum mentioned deleting a file of muse on the server to reset something - any who want to add to it or guide me to solve these problems, so I know what to do when they arrive

  Jay

  Don't know if it's the same thing, but share this discussion JavaScript exception: error calling the function of selection: [object error] after the last update of the software Adobe Muse.  I export the html files and load them on my server.  I replaced all the files.  Only happens in IE11 just in case it helps.