Is it possible to connect with FACEBOOK Customer / Tech Support? I got my ID stolen FB and I can't connect with a living soul!

Similar Questions

• Re: Satellite L300 - is there a possibility to connect with TV?

  Hello.
  I want to apologize for my English. It is not my mother tongue.
  When I bought my laptop, I didn't think the connection of it with TV. And that is why I do not pay attention to the lack of HDMI or DVI connectors on my laptop. Maybe someone knows if there is a possibility of connection to the TV. The laptop has only the VGA connector (to connect and an external monitor), microphone, USB connector and Express card slot. My TV (Toshiba AV500PR) has no VGA connector. AR the least VGA connector on it has a description it's a service connector.
  But the main problem is sound. The output signal can be get from microphone connector.

  I hope that someone has already solved this kind of problem.
  Thanks in advance.
  Alexey

  I agree with sanremo. You should buy a VGA adapter cinch set a local computer retailer. Then, you can connect your laptop to the TV.

  I have a Satellite L300 too and the VGA adapter cinch set works perfectly.

• Is it possible to connect the Qosmio F60 - L10 with a docking station?

  Hello

  is it possible to connect the F60 - L10 with a docking station? I would to connect to the docking station, a monitor and a peripheral such as a printer and a LAN cable.

  Thank you.

  Hello

  You cannot connect Qosmio for docking station because Qosmio includes not all ports docking at the bottom of the unit. Have you seen one?

  But you can buy a [Dynadock | http://eu.computers.toshiba-europe.com/innovation/generic/Dynadock_EMEA_0107/cnt/GENERIC/key/Dynadock_EMEA_0107/banner_id/Q3_DYNADOCK_SM_TEG_0107] Toshiba.

  The Dynadock can be connected to computer laptop s USB port.
  Google a bit for Dynadock. There are different models on the market

  Welcome them

• Time Capsule visitor files a network (associated with possible network connectivity)

  I have one Capsule of 3 TB I bought in early 2015.  I had a very frustrating problem from the beginning with her down my network, apparently at random.  I tried a lot of different things, and nothing worked, so I post to see if anyone else can help.

  The TC is plugged directly into my UVerse router/gateway via ethernet and I put the TC to have a static IP address.  The Uverse router firewall has a rule for the TC and TC shows how a router cascade in the rou UVerse.  I have wireless 2.4 GHz and 5 GHz when put in place on the TC.  I have a Mac Mini connected directly to it via ethernet, but it's a recent thing (maybe I was hoping that it would help).  I have also a PC attached to it for internet access only windows.  I have two Macs backup via Time Machine, well I tried to disable backups on one to see if that has had an effect (it didn't).  In fact, I have a whole list of notes on things I tried in the last two months, since I started to really tackle this problem seriously.  In particular, I've tried steps 1 to 5 in this link: Time Capsule constantly default to be recognized by Airport utility if I have not tried a factory reset.  I'm running the latest versions of OS X and iOS.

  The basic model is that I have the TC set up and work.  The wireless works fine.  Time Machine will back to it fine.  I can see the TC in the Finder.  I can open the AirPort on a Mac and iOS utility and it is 'green '.  All right.  Then, at a random time in the next few days (the longest one since I started to take notes is 7 days), the TC will drop from the network.  The without wire will be there and still works fine, but Time Machine will not be able to find it for backups, it will not be displayed in the Finder.  AirPort (iOS or Mac) utility shows a yellow triangle with an exclamation point and says that the device is no longer part of my network.  I have to unplug the TC and plug it back again so that he can return to the top.  As soon as I did that, everything will return to normal and be fine for a few days, and then he disappeared again.

  Tonight, however, I connected to another event.  I was watching something on my AppleTV when he started the buffering.  I grabbed my iPhone to see if my internet has declined.  More or less on a whim, I checked the airport utility and noticed that the TC showed a green dot but 'Internet' showed an orange dot.  A minute or two later, the AppleTV started playing video again, so I checked again airport utility and this 'Internet' time, has a green dot and the TC showed the usual brand yellow triangle / exclamation indicating it was abandoned.  I noted the time and then went back to look at what I had looked at.  About two hours later, I went to the power of the TC cycle and understand what to try next.

  The AppleTV is not connected to the CT.  It connects to the UVerse bridge (it is connected to the ethernet on the back of one of the set-top boxes UVerse).  This means that the loss of the internet was for everything in the House, not only the TC.  Something about the process seems to have caused the TC to drop from the network somehow, but everything remains recovered him very well.  Looking the UVerse bridge, it seems rebooting once since then (about an hour and a half after the TC dropped) but not by anyone in the House (I don't know if perhaps AT & T pushed something in the modem or if it is defective).

  So, no idea why loss of connectivity would cause the TC had to give up in the network?  Of course, it also appears, I may have a problem with the gateway Uverse, but if the TC goes down when everything is ok, it suggests a problem here as well.

  Since you seem to have picked up some things from my post...

  We will continue the process... This is where life becomes difficult. It is not uncommon to what you feel.

  Just to get the full picture.

  The TC is plugged directly into my UVerse router/gateway via ethernet and I put the TC to have a static IP address.

  I would prefer you to the TC using the bridge... using standard DHCP... (you can leave the Uverse for him apply a DHCP reservation).

  Once you do that... move the cable that connects the TC to the WAN Uverse on TC to the LAN port... It is fine in bridge...

  If it always falls I have a more serious way to do. It is much more complicated, however, because apple has removed all controls on sensitive router. But I think you will find that the WAN port is dubious on the TC. It can appear at different times and with different modems/routers...

  Alternatively, you can take the TC to Apple and have them replaced... It took me three goes to get a decent one. And I'm not even sure that the fault will not be displayed again in the near future out of warranty.

  But it could appear perfectly when Apple test it... and the replacement can be just as bad... in other words it is a deeper problem that Apple realize.

  Another thing tricky, I discovered.

  Airport routers stick to the local domain... even packed... they do not Pick-up area of the main router.

  This means that some devices will lose the connection because they are on the wrong field. It is possible to change the field on the Uverse make local as well... Since apple has not all the controls of the airport. I did some time ago on my main router and I can hardly give you direct evidence that helps... as many adjustments it is one of the many small things that are in addition to the lack of reliability that can help if you get the other 20 on the right. I think it helped...!

  From there on, we need to work a little more on maybe the ethernet connection... or the LAN port 100 Mbps gigabit Uverse? I think I'd rather see you adjust the speed of 100Mbps as long as your internet speed is less than that of course for gigabit.

  Give me some screenshots of the configuration... It is also useful.

• First it is possible to connect a cDAQ-9174 with a NI TPC-2206 or the NI TPC-2212?

  Hello

  First it is possible to connect a USB CompactDAQ (cDAQ-9174) in a port USB of the TPC-2206 or TPC-2212? ¿Did you try someone before?

  Thank you.

  Hello

  It is possible, Windows XP Embedded provides users the ability to develop on a desktop PC and quickly deploy to an embedded target. With NEITHER-DAQmx on Windows XP Embedded, developers will have access to common programming languages such as C++ and .NET.

  follow the link corresponding to your request: http://www.ni.com/white-paper/7757/en

  Best regards

• Is it possible to speak with a technician if I am using Dial-up Internet? It seems that I waited more than an hour while trying all the time to connect.

  Is it possible to speak with a technician if I am using Dial-up Internet? It seems that I waited more than an hour while trying all the time to connect.

  original title: Online Tech Support

  Hi Cindy,.

  No, unless you have a second phone line, using a cell phone, or try something like Skype on your computer.

  Try to connect to what?  Technical support for what?  Of course, you could connect here, so it works.  What is the problem that you are looking to get help?

  I hope this helps.  If we can help, let us know.

  Good luck!

• Is it possible to connect my Application ' Stop' button with the "Run" button of LabVIEW?

  Problem - one of my clients recently tested my new LabVIEW application and asked how the arrested LabVIEW application can be restarted without clicking on the "Run" (right arrow) button.

  Is possible solution - possible to connect my Application ' Stop' button with the "Run" button of LabVIEW?

  Thank you!

  Barry

  The big problem is in your Acquistion to stop audio event. You run the LabVIEW stop sign which is the equivalent of hitting the Cancel button in the toolbar.  (See contextual help on that).  You can stop the acquisition, but you don't want to stop your LabVIEW program.  You need this case in the event your computer to transition state in a sleep mode when you do not make any purchase.  Then hit the purchase button to start again transitions the machine state in the acquisition.

  In your case of program output, you want really to leave LabVIEW it.  You want to run and stop commands like closing the com port and one of these activeX references.  Then allow it to stop the while loop.  Turn the LabVIEW out outside the loop so that once everything is cleaned, your application may close.  You probably want to wrap this command in a case structure so that if you are in the execution environment, it leaves your application.  But if you are in the development environment, you don't want to cause your LabVIEW environment stop.  Another thing is that right now, you actually have a race condition in the Exit event.  The com port will close first or LabVIEW will come out.  There is no defined order of execution.

  Alternatively, you can have an event to close panel? in this way, you haven't accidentally short circuit all your program by pressing the X key.  You want to capture this event, discard it.  And if you want to not actually closed, did trigger the Exit Program button so that you can gracefully shutdown.

• is it possible to connect with SSH from router to router?

  is it possible to connect with SSH (1.0 or 2.0) to a CISCO-router/Switch to another CISCO-router/Switch?

  I think that an SSH connection to a router/switch is no longer possible to a women (Windows/Linux/Unix)

  is it not?

  I don't know if Cisco Compatible SSH 2.0, but there IOS - s that support ssh 1.0 and you can connect with ssh 1.0 from a cisco device (if it supports) to any device with

  Router # ssh?

  Select encryption algorithm - c

  -l Log in using that username

  options to specify o

  p connect to this port

  Address WORD IP or hostname of a remote system

  Router # ssh x.x.x.x

• Possible to interact with the box in a custom menuitem?

  Is it possible to allow custom menu items to check (as in the Windows menu menuitems can be)? The 'checked' property is read-only for the menu item and the menu action, so I guess I wonder if there is no known workaround solution or whether it is a case of readonly feel readonly. Thank you!

  Menu navigation related stuff in mind DOM me nothing, but Google turned up this blog entry from substances: http://in-tools.com/article/scripts-blog/showing-text-formatting-overrides/

  -and then I pourrait found in the DOM, well hidden:

  Adobe InDesign CS6 (8,0) object model JS: ScriptMenuAction

  So, it seems that you must set the State of a menu action. The action itself can be attached to one or more menus (MenuAction, where checking is read-only, is a parent class of the ScriptMenuAction and here it is read/write), probably to make sure that if a certain menu item appears in more than one menu, they are all "up to date" at the same time.

  Example of substances still affects 'checked = false' and change the menu text to indicate its current state, but I guess one can also toggle the enabled state.

• Is it possible to connect an external drive Thunderbolt 2 to a USB equipped MAC Tower?

  Is it possible to connect an external drive Thunderbolt 2 to a legacy equipped USB MAC Tower?

  No, currently the Thunderbolt must be integrated with the system board.

• When I tried to connect to gmail, I was told that I had a problem with cookies. I cleared the cache, etc. and still can not log on.

  We have detected a problem with your cookies settings.
  When I try to connect to gmail, I get the following message is displayed.

  Enable cookies

  Make sure that your cookies are enabled. To enable cookies, follow these browser-specific instructions.
  Cookies and empty the cache

  If you have cookies enabled but are still having problems, clear the cache and cookies of your browser.
  Adjust your privacy settings

  If your cache and clearing cookies doesn't resolve the issue, try adjusting the privacy settings of your browser. If your settings are up, manually add www.google.com to your list of allowed sites. To learn more

  I checked and cookies are enabled. I cleared the cache. How can I add www.google.com to my allowed sites list? This will solve the problem?

  Thank you.

  What are your cookies settings? For example:

  Conservation rules: use the custom settings for history

  {X} accept cookies from sites
  Accept third-party cookies: always
  Keep until: I close Firefox

  Some sites may not work well if you have disabled the 'third party' cookies (I don't remember if Gmail is one of those).

  Have you deleted all existing Google cookies? You can do it from any page search on google.com. Here's how:

  While displaying a page on the site, try either:

  • Right click and select View Page Info > Security > "View Cookies".
  • (menu bar) Tools > Page Info > Security > 'view the Cookies '.
  • Click on the globe or padlock icon in the address bar > additional information > "View Cookies".

  In the dialog box that opens, google.com should be filled up automatically and you can delete cookies from the site individually.

  Then try logging into Gmail. Who help me?

• Is AT200 - possible to connect USB devices?

  Hi all

  I bought last week a Tablet AT200-100 (in Spain), and a few days ago I also bought an adapter for USB cable for it. I've seen (at least that is what I understood) that it is possible to connect devices to the Tablet (as a host).

  Well, I tried with two cables different and two different pills (I went back one and got another), and I can't get it to work.
  I hope you can help, maybe I'm doing something wrong...

  I used a micro USB B (plug) to USB (plug) adapter, and I tried to connect a USB keyboard, mouse and an external hard drive. Everything seems to work, nothing doesn't appear on the screen, and nothing new appears in the file manager. The light devices has never lit at all.

  Is it necessary to install something before? To activate something?
  I use a bad cable?

  Help, please!

  Thanks in advance!

  Hello

  The AT200 seems to be equipped with a USB port of microfiber that support OTG technology.
  Allows you to connect the key USB and HID (keyboard and mouse).
  This port is USB 2.0 compliant.

  To connect a USB (memory flash USB, keyboard or mouse), you must use a cable OTG (USB On-The-Go). The cable must be certified USB ON-THE-GO.
  http://en.Wikipedia.org/wiki/USB_On-the-go

  PS: this Tablet does not support a printer and as I know the operation of the port of USB devices was not confirmed for some USB devices may not work correctly.

• Sat M60: Possibility to connect the external keyboard?

  is it possible to connect a keyboard external usb to a satellite M60? what I need to change the bios settings?

  Thanks in advance
  Marco

  Hello

  I n think that it of necessary to have admin rights.
  You can use an external USB keyboard with no problems.
  But if you want to use the keyboard USB under Win NT USB emulation (or something like that) option in the BIOS must be enabled.

  Good bye

• Is it possible to connect Thunderbolt display MacBook?

  Is it possible to connect Thunderbolt display MacBook?

  N °

  A Thunderbolt screen can only be used with a Mac equipped with a Thunderbolt port.

• screen cracked on dell inspiron 6000 is possible to connect a laptop computer desktop monitor, I have a connection to put pine for laptop 15 it be used for external monitor

  laptop screen broken is it possible to connect external monitor laptop desk has 15 planter back is then how

  "mannyesp" wrote in message News: * e-mail address is removed from the privacy * .com...

  laptop screen broken is it possible to connect external monitor laptop desk has 15 planter back is then how

  Plug into laptop and the monitor turns on and if not detected automatically, and then use the Fn key and F key (will be CRT or a rectangle on the keyface) switches between the laptop screen, laptop and external outside only.  Leave quickly 10 seconds for system key pass.
   
  You may adjust the settings to make sure that the external monitor is the primary instrument and must also adjust the display settings (be normally click with the right button on an empty area of the desktop by clicking on properties or preferences.