Is it possible to copy a model and paste it in another project?

Similar Questions

• Translation problem click / highlight boxes when copy and paste slides from another project

  I am baffled by this problem because it doesn't seem wise. I opened a new project to record a simulation, and when I did, I copy and paste all the slides in the section in my "Master project" If you want to. After the dough, I noticed that all of the boxes, clickboxes and highlight, I had taken the time to carefully resize were all out of wack in terms of position. Here are the best, I opened a blank project and copy and paste the same slides... this time the click and highlight boxes were in the correct position. Any ideas?

  Thanks in advance,

  Neel

  Oh, 'in position '... I see...

  The project is bigger than the other? For example, the original perhaps to 800 x 600 and the new to 850 x 650?

  Positioning can then be turned off relatively...

  Take a few elements of the sample and note their x / y positions of the properties panel, in the first draft (under 'Transform' in CP 5.5).

  After pasting in the new, note these same x / y positions.

  Is there a significant factor?

  If this is the problem, make sure that the sizes are the same, make the dough, then expand the project later (and maybe everything will keep its anchors?)

  I have not seen that happen in new versions of CP.

  You can try to check "Keep the Proportions" option in the properties of the original, just in case where this helps to "compel the position" too... guess total...

• Copy of a flash file and paste it into another...

  I want to copy a .swf file I have and paste it into another one, executives and all.  I tried but nothing is copied on correctly.  Or are my buttons on a single image... and no longer act as a button with Up - too-Down-Hit managers.  Is this possible? Help, please...

  Thanks guys,.

  -Dedikation-

  Select all of the frame of the timeline, right-click the selection, and choose copy image.  In the other file, insert-> new symbol-> MovieClip... etc...  Select the key of one layer only the empty movieclip, then right-click the selection and choose Paste images.  All layers and managers must paste that they were copied.

• How can I copy a location of a photo and paste it in another? iPhoto can do this, but I can't find a way with Photos.

  How can I copy a location of a photo and paste it in another? iPhoto can do this, but I can't find a way with Photos.

  Accessible location via Get Info (command-I) information.

• How to copy and paste it into another file to send by email?

  HOW TO COPY OR CUT AND PASTE, SEND AND EMAIL?

  either unique or overall.

  to highlight point left click and drag right click-copy-or select right click Copy-go to the mail and right click - click on paste.

• How to copy phone numbers and paste them into the Dialer?

  Hello everyone!

  I posed in the title, how can you copy phone numbers and paste them into the Dialer to make calls?

  Thank you!

  I can't send a report - I am a normal user like you but I was help other owners for awhile better as I can - to contact Sony care use this link http://www.sonymobile.com/global-en/support/contact-us/

• Where is the copy or cut and paste the toolbar?

  Where is the copy or cut and paste the toolbar?  How can I register my toolbar with the bold, italic, buttons etc.?

  Hello

  1 are. what application you referring?

  If you use word, then check out these links and check if it helps:

  http://Office.Microsoft.com/en-us/Word-help/create-a-custom-toolbar-HP003085155.aspx

  http://Office.Microsoft.com/en-us/Word-help/customize-your-toolbars-and-menus-RZ001003635.aspx

  It will be useful.

• Why Adobe Photoshop CS6 cannot copy and paste text from another source, such as Notepad or Ms Word?

  Why my Adobe Photoshop CS6 cannot copy and paste text from another source, such as Notepad or Ms Word?

  Here's the method copy / paste that works for me in Photoshop CS6:

  1. Select and copy text from a word processing program or another source.

  

  2. create a new text box in a Photoshop file by clicking on the icon that looks like a "T" in the toolbar.

  

  3. in Photoshop, go to the Edit menu at the top of the screen and the mouse down to paste.

  

  4. the copied text now appears in the text box.

  

• Copy a part of a picture and paste it on another?

  I'm taking a writing of an image and paste it on another picture. Is this possible?

  Thank you!

  In Photoshop Yes in Lightroom without...

• I just upgraded to Acrobat Reader DC and I am unable to take a snapshot of a PDF and paste it on another PDF file

  I just upgraded to Acrobat Reader DC and I am unable to take a snapshot of a PDF and paste it on another PDF file, I have to paste in word and then to the PDF, it becomes blurry this way and also has a lot of text in blue instead of black in the picture.  Is there a way I can copy a PDF file and paste it on another PDF file?

  Or is there a way of reversing this adobe to the previous version?

  The files are not locked or the other and I tried the guide help without success.

  Hi olir74691516,

  Everything sticking the snapshot of one PDF on the other we add a layer to the PDF document that you paste the snapshot. You cannot copy & paste in the player of free application, you will need Acrobat application for her.

  Kind regards
  Nicos

• Is it possible to move the video of a prelude to another project?

  Is it possible to move the video of a prelude to another project?

  Hi Lekepistol,

  Thank you to try prelude workflows.

  Prelude working with one project at a time. He cannot communicate between different projects. You just need to close the current project, open the other and ingest the file to use.

  Customer feedback is important for us to improve the workflow and functionality. We are working hard to implement the features desired among our products.

  Please fill out the following form with accuracy. We will discuss the suggestions.

  Feature request/Bug Report Form

  Thank you

  Mayjain

• I want to cut a piece of a picture and paste it into another picture.

  I want to do something in photoshop that is EXTREMELY easy to do in Microsoft Paint, but I can't use paint, because the file size is too large.

  What I want to do is cut a part of the image to a file, and paste it into another file, move to the location I want.

  In painting, I would choose the area I want to cut/copy.

  I'd then cut or copy.

  I then opened the new photo

  I would then paste.  This would cause MS Paint paste the section copied in the upper right of the screen.

  I then propose section glued to the desired location.

  It was very, very, very simple.

  How do these same steps in Photoshop?

  I am a collage.  The pieces of cut/copy range in size.  I have MS Paint, I just stick, then move them.  You don't have to accurately know their size.  I can't do the above in Photoshop using "paste in" because I have to know precisely the size of the portion that I just cut.

  You have the tool to move (V) of the selected?

  Could you please post a screenshot with the Panel visible layers?

• try to cut a picture and paste it on another picture

  I'm new to photoshop and have no idea of what I do I have an assignment due in an hour and all I have to do is cut a picture (photo I took) and paste it into another picture (another photo, use it as its background) can someone help me please?

  Open place background image using image file location to another in the second image menu use the transformation of the place to the size of the second picture across the background. Add a layer mask to the layer. Paint with black on the layer mask to erase the background of the images placed cutting the subject. Or add a black and white top layer mask to reveal the subject of the painting.

  

• I would like to know how I can copy the screen and paste on a mail using the function key

  I'm trying to show my screen by copying and then paste it into an email.

  Hello

  try this hold down CTRL + Prtscr, SysRq and open paint and paste is if possible try ctrl + v else goto bar menu option edit and paste
  the majority of the mailbox advanced after using CTRL + Prtscr, SysRq can take the image directly paste in
  Let me know if there no

• Disable the copy or cut and paste completely

  From: kend_beledm

  Is it possible on a windows-based systems to disable or completely disable the copy and paste function, any type of program is displayed on the screen.

  De : Andrew McLaren

  You can do this for Windows as a whole (and even if you did, users could simply use a print-screen instead, limited data). But you can do it for specific applications: essential technology is Windows Rights Management Services ("RMS"). See http://www.microsoft.com/windowsserver2003/technologies/rightsmgmt/default.mspx

  If you have an application that can participate in a RMS infrastructure, you can indeed set up policies to selectively allow or prevent the n-cut-paste, etc., to users and groups. or refuse to cut-and - paste altogether in this application.

  Microsoft Office is the application most common which can be plugged into RMS. Once it is all together, it is extremely effective... you really want to cut-and - paste privileged information from this juicy email or a Word document. but hell, you just can not! You also cannot transfer protected emails, etc..

  There is a public SDK, so anyone can write an application that subscribes to RMS and restrict access to the application data. However if you have a legacy application (IE, an already existing application) which you can not re-engineer, so I think you're a bit stuck. You may need to address the issue of security in a non computer perspective, such as human resources policies, etc.

  You can also take a look at the Software Restriction policies ("PRS"), a similar security Windows feature. SRP will not stop users to cut and paste, as such; but it lets you create a very controlled environment. You can stop the users do a lot of things you don't want to do. See:

  http://technet2.Microsoft.com/windowsvista/en/library/0d504b1d-e57c-4DCC-8A5A-8d1da9e4d1fe1033.mspx?mfr=true

  It will be useful,

  --

  Andrew McLaren
  amclar (at) optusnet dot com dot to the

  Another response of the community of Windows Vista discussion groups