Is it possible to determine programmatically the children of a class during the program execution?

Similar Questions

• Is it possible to get programmatically the end points of a Switch Executive road connected in LabVIEW?

  I am writing an application for plotting of curve for evaluation of ASIC devices and should link all of the pairs of pins possible to do this. I use the main switch to load in the roads, there is a specific ASIC and want to get programmatically the end points of the current road for insertion in the logging system. Is this possible?

  Thank you

  Nick

  It can be an adventure, but you can get there.

  

• Is it possible to determine if the text in Word format converted using OCR?

  Hi, I want to know if some PDF Convert to editable using OCR text, is it possible to identify the text is converted using some OCR?

  Thank you

  Hi kanav_sareen,

  You can track the changes made to the file which are made in MS Word application after have exported them PDF.

  However there is no way to identify if the text in Word format of the file being converted with OCR.

  Let me know if you need additional assistance.

  Kind regards

  Meenakshi

• The data execution program has wiped my mailboxes (in OE)?

  I was deleting a file duplicate photographs, because my system said that memory was getting short.  I got a message saying that the program execution of data necessary to shut down the system, and when it is restarted, the file photos was back where I didn't want it.  I repeated once or twice, then closed for the night then.  This morning, I find that all my mailboxes in Outlook Express are cleaned... including several crucial elements I had to attend today!  and literally years of work & post...

  Help!

  By "mailboxes", do you mean the files? What is a POP3 account? See if that helps.
   
   
  Two reasons the most common for what you describe is disruption of the compacting process, (never touch anything until it's finished), or bloated folders. More about that below.
   
  Why OE insists on compacting folders when I close it? :
  http://www.insideoe.com/FAQs/why.htm#compact
   
  Why mail disappears:
  http://www.insideoe.com/problems/bugs.htm#mailgone
   
  Recovery methods:
   
  If you are running XP/SP3, then you should have a backup of your dbx files in the Recycle Bin (or possibly the message store), copied as bak files.
   
  To restore a folder bak on the message store folder, first find the location of the message store.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, the .dbx files are by default marked as hidden. To view these files in the Solution Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.
   
  Close OE and in Windows Explorer, click on the dbx to the file missing or empty file, then drag it to the desktop. It can be deleted later once you have successfully restored the bak file. Minimize the message store.
   
  Open OE and, if the folder is missing, create a folder with the * exact * same name as the bak file you want to restore but without the .bak. For example: If the file is Saved.bak, the new folder should be named saved. Open the new folder, and then close OE. If the folder is there, but just empty, continue to the next step.
   
  First of all, check if there is a bak file already in the message. If there is, and you have removed the dbx file, go ahead and rename it in dbx.
   
  If it is not already in the message, open the trash and do a right-click on the file bak for the folder in question and click on restore. Open the message store up and replace the .bak by .dbx file extension. Close the message store and open OE. Messages must be in the folder.
   
  If messages are restored successfully, you can go ahead and delete the old dbx file that you moved to the desktop.
   
  If you have not then bak copies of your dbx files in the Recycle Bin:
   
  DBXpress run in extract disc Mode is the best chance to recover messages:
  http://www.oehelp.com/DBXpress/default.aspx
   
  And see:
  
  http://www.oehelp.com/OETips.aspx#4
   
   
   
  A general warning to help avoid this in the future:
   
  Do not archive mail in default OE folders. They finally are damaged. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  
  http://www.oehelp.com/OETips.aspx#3 
   
  And backup often.
   
  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx  

• Is it possible to determine which parts of the runtime of the BCI are required?

  Recently, I added a few .NET controllers to allow me to use c# written by third-party DLLs.

  A few years ago, due a number of reasons, rather that runtime CVI together with our shipping software, we have stripped the small pieces that were needed to make the software run, which kept the overall size of the package down. Given the size of the complete engine (134MB) and the fact that we probably use very little of it, I'm reluctant to add, given the fact that the package occupies only around 10-12 MB.

  I discovered yesterday that the latest version of our software does not work on machines other than my development machine - either're missing us now stuff CVI.

  You might wonder why I do not use the distribution manager to build. In other words, due to the law American that we are prohibited from any form of encryption beyond a certain level as part of a software project we produce, and the installer at the moment entered in this category.

  So that's my dilemma. My questions are...

  (1) is it possible to determine what might be missing by the simple knowledge that the addition of .NET controllers caused the problem.

  (2) if I use the distribution manager to make a working copy of the software, would it not straight to the before enough to then identify what additional things other than my own code, has been added to make the software work and if so where is the installer put it. I have the impression that something gets stuck in Windows\System32, but are there other places too?

  I hope you can help

  Concerning

  Gavin Summers

  You have been really helpful guys... I'm sorted now... The problem arose mainly because I have 9 upgrade to 2010 and then 2010 SP1 for this project. I already had a local copy of the CVI. Reflector.dll in my (9.0.248) project, or something similar, so that was the cause of the problem, but because I just started testing on machines other than my development machine, I haven't noticed so far.

  I went looking for the new copy of this file, when we moved to 2010 SP1, but found no one. I didn't realize he was locked up in the House - I think he could be in the system32 directory before. I have now managed to get a copy from there and when included in the installer, the project is now working on other machines.

  As I said before that the situation is far from the idea, saw out the locks take out the execution engine of the CVI, but because of the way we ship software and due to the restrictions that are imposed by the U.S. Government on issues of encryption, full runtime is now too big to ship with the software , and we cannot use the MSI installer as its encryption level at least at the last valuation was too high.

• on Windows 7 Home Premium edition. Is it possible to determine the ip address of any remote login to my computer?

  My computer is running on Windows 7 Home Premium edition.    Is it possible to determine the ip address of any remote login to my computer?    I noticed that termservice was running, as well as the remote registry and winrm - and I began not to them.

  Thank you.

  My computer is running on Windows 7 Home Premium edition.    Is it possible to determine the ip address of any remote login to my computer?    I noticed that termservice was running, as well as the remote registry and winrm - and I began not to them.

  Thank you.

  Well quite simply a Win 7 Home Premium computer can NOT act as a host [DRC] Remote Desktop is not a problem. If you want to see if something needs to connect remotely with the help of another program you can look in the event viewer for clues...

  http://Windows.Microsoft.com/en-us/Windows/search#q=Event+Viewer

  You can also go to Start and type services.msc in the search window. Start the component services snap-in and stop these three services. Set Manual as well.

  If you suspect a virus or malware of any kind make sure you run a good antivirus program such as MSE or download and run Microsoft Safety Scanner or ESET online scanner...

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  http://www.eset.com/us/online-scanner/

• Possible to determine the dimensions of the image to download cffile?

  Hello
  
  Is it possible to determine the pixel dimensions of an image jpg or gif file which has been downloaded using cffile?
  
  Kind regards
  Greg

  or...

  
  imgFile = createObject("java","javax.swing.ImageIcon").init("#image_name#");
  imgFile.getImage ();
  w = imgFile.getIconWidth ();
  h = imgFile.getIconHeight ();
  

  width = "" #w # "height =" #h #.

  Adjust the code accordingly to what you do.

• Determine if the variant is 1 d or 2D array

  Hello

  I am writing a program that analyzes the data of a large cluster of entry so it can be written in a format that is more well known to read later. I am trying to find a way to determine if a variant is an array of 1 d or 2D array.

  I wrote a routine that will determine if the variant is an array, and the type of table (dbl, i32, etc.), but I don't know how I can tell if the table is 1 d or 2D so I know what I should wire upward on terminal 'type' of the block "Variant to the data.

  When I look at the variant as an indicator, if it's a 2D painting is something like [33 x 236], see if the table is a table 1 d I see something like [256], but is it possible to tell by program if I'm dealing with a table 1 d or 2D array? Sorry if I'm missing something obvious.

  Any idea is appreciated!

  Best regards

  Michael

  Look at the screw in \Utility\VariantDataType

• Is it possible to determine if a person has access to my computer via an external source?

  Original title: hacking

  Is it possible to determine if a person has access to my computer via an external source?

  Hello bconn07,

  You must grant permissions via remote access or they would have to introduce a software on your pc without your knowledge for them to access. The software is usually by means of malicious programs and your anti-malware application must pick up that, especially if it's a keylogger or a rootkit. Try to download Malwarebytes antimalware http://malwarebytes.org (download the free version). Install it and then run it. It's good enough to malicious software localization.

  Pirate can introduce a software called keyloggers that send information on the key, you press on your keyboard. This can help them steal passwords etc. However, I do not say that you even have apps keylogging or view on your system, so don't panic. I suggest, however, an application called Keyscrambler personal http:// http://www.qfxsoftware.com/download.htm it works by disguising and precautions that you ever install key press you. By example, if you typed "Bill" keyscrambler journal would be something like 'kl97' thuis makes it very difficult for any keylogging software interpret what keys you actually used.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• How can you determine what the user watch calendar view (month, week, day, list) the calendar of CSS (5.0)

  We run Apex 5.0.1.00.06 and I would like to add a region to a page, if the user displays the LIST of the CSS calendar view. I can't understand how to determine which view the user displays currently. Is it possible to determine to create a condition to show another region in they are on a particular view?

  BillH104 wrote:

  We run Apex 5.0.1.00.06 and I would like to add a region to a page, if the user displays the LIST of the CSS calendar view. I can't understand how to determine which view the user displays currently. Is it possible to determine to create a condition to show another region in they are on a particular view?

  This can be achieved using some dynamic measurements, to hide the region if the calendar is the display month view when loading the page and to show/hide the region when you click the list/month selector.

  Add a static region ID to region calendar for use in jQuery selectors.

  Name: See the region list - load

  Event: Loading the page

  Condition: Expression of JavaScript

  Value:$('#static-region-id .fc-month-view').length > 0

  Real Action

  Action: Hide

  Selection type: Region

  Region:

  Nom : See the region list - click

  Event: Click

  Selection type: jQuery Selector

  jQuery Selector:.fc-button-group button

  Condition: Expression of JavaScript

  Value:$(this.triggeringElement).hasClass('fc-list-button')

  Real Action

  Action: Show

  Selection type: Region

  Region:

  
  

  Action of false

  Action: Hide

  Selection type: Region

  Region:

• Determination of the Type of storage with PowerCLI

  Hello

  It is possible to determine the type of storage (Clariion, Symmetrix, etc.) with the identifiers of vml or naa? There is another way to determine the type of storage?

  VML.0200000000 60060480000190300919533030304133 53594d4d4554

  NAA.60060480000190300919533030304133

  Thank you in advance.

  Best regards!

  Yes, it is possible.

  You could do something like that

  $storageVendors = @ {}

  "60060480" ="EMC";

  "60050768" ="IBM".

  }

  Get-VMHost MyEsx | Get-ScsiLun |

  Select CanonicalName,

  @{N = 'Seller'; E = {$storageVendors [$_]} CanonicalName.Split('.') {{[[1]. subString (0.8)]}}

  You will have to compile a complete picture of the ID and sellers of course.

  But I wonder why you wish to do this, since the information is already present

  Get-VMHost MyEsx | Get-ScsiLun |

  Select CanonicalName, seller

• How to determine if the layers overlap?

  I am trying to find a way to determine if the different layers have pixels that overlap.  The layers are formed at random and need to fit as closely as possible, so using the limits to check the overlap would not work.  I'm basically looking for a way to detect duplication based on pixels that are 100% opac.  Is there an easy way to do this in a script?

  I had some free time at work so here is my implementation, only problem I do not know how to remove the "no dialogue selected pixels.

  Alert (checkOverlapping ());

  function checkOverlapping()

  {

  var selectedLayers = getSelectedLayersIdx();

  If (selectedLayers.length! = 2) {alert ("Please select the two layers you want to check"); return null ;}}

  makeActiveByIndex(selectedLayers[0]);

  selectActivePixels();

  makeActiveByIndex(selectedLayers[1]);

  intersectActivePixels();

  activeDocument.quickMaskMode = true;

  activeDocument.activeLayer.threshold (128);

  activeDocument.quickMaskMode = false;

  Try

  {

  activeDocument.selection.bounds;

  }

  catch (e)

  {

  return false

  }

  activeDocument.selection.deselect ();

  Returns true;

  }

  function cID (inVal) {return charIDToTypeID (inVal) ;}

  function of the sID (inVal) {return stringIDToTypeID (inVal) ;}

  function selectActivePixels()

  {

  var desc15 = new ActionDescriptor();

  var ref8 = new ActionReference();

  Ref8.putProperty (cID ('channel'), cID ("FSC"));

  desc15.putReference (cID ("null"), ref8);

  var ref9 = new ActionReference();

  Ref9.putEnumerated (cID ('channel'), cID ('channel'), cID ("TN"));

  desc15.putReference (cID ("T"), ref9);

  executeAction (cID ("setd"), desc15, DialogModes.NO);

  }

  function intersectActivePixels()

  {

  var desc18 = new ActionDescriptor();

  var ref13 = new ActionReference();

  ref13.putEnumerated (cID ('channel'), cID ('channel'), cID ("TN"));

  desc18.putReference (ref13 ("null"), cID);

  var ref14 = new ActionReference();

  ref14.putProperty (cID ('channel'), cID ("FSC"));

  desc18.putReference (cID ("with"), ref14);

  executeAction (cID ("Introduction"), desc18, DialogModes.NO);

  }

  function makeActiveByIndex (idx) {}

  var / / desc = new ActionDescriptor();

  Var ref = new ActionReference();

  ref.putIndex (cID ("Lyr"), idx)

  desc.putReference (cID ("null"), ref);

  desc.putBoolean (cID ("MKV"), true);

  executeAction (cID ("TPCV"), desc, DialogModes.NO);

  };

  function getSelectedLayersIdx() {}

  var selectedLayers = new Array;

  Var ref = new ActionReference();

  ref.putEnumerated (cID ("Dcmn"), cID ("Ordn"), cID ("Trgt"));

  var / / desc = executeActionGet (ref);

  If (desc.hasKey (sID ("targetLayers"))) {}

  DESC = desc.getList (sID ("targetLayers"));

  var c = desc.count

  var selectedLayers = new Array();

  for (var i = 0; i)<>

  try {}

  activeDocument.backgroundLayer;

  selectedLayers.push (desc.getReference (i). getIndex());

  } catch (e) {}

  selectedLayers.push (desc.getReference, (i), .getIndex () + 1);

  }

  }

  } else {}

  Var ref = new ActionReference();

  ref.putProperty (cID ("Rprp"), cID ("ItmI'));

  ref.putEnumerated (cID ("Lyr"), cID ("Ordn"), cID ("Trgt"));

  try {}

  activeDocument.backgroundLayer;

  selectedLayers.push (executeActionGet (Ref), .getInteger (cID ("ItmI"))-1);

  } catch (e) {}

  selectedLayers.push (executeActionGet (Ref) .getInteger (cID ("ItmI")));

  }

  var vis = app.activeDocument.activeLayer.visible;

  if(vis == true) app.activeDocument.activeLayer.visible = false;

  var desc9 = new ActionDescriptor();

  var list9 = new ActionList();

  var ref9 = new ActionReference();

  Ref9.putEnumerated (cID ('Lyr'), cID ('Ordn'), cID ('Trgt'));

  list9.putReference (ref9);

  desc9.putList (cID ('null'), list9);

  executeAction (cID ("'Shw"), desc9, DialogModes.NO);

  if(App.activeDocument.activeLayer.Visible == false) selectedLayers.shift ();

  app.activeDocument.activeLayer.visible = live;

  }

  Return selectedLayers;

  };

• Call of action/script...is it is possible to determine?

  I wonder if it is possible to determine in a script which is the component script or action.

  Example: Suppose I have Action 1 and Action 2 both call the same script. For Action 1, I prefer the script to do a thing in Action 2, I would have preferred something slightly different. Is it possible for the script to know that 1 Action active?

  Ditto for when a script calls another script. Without the caller script set anything external that reads the script called, the called script cannot know what active script?

  Take a look at .stack $. The last line must contain the name of the script the highest level.

  As for stocks, you can't say what actions a script was called from. I suggest scripting wrapper for stocks. Put the name of the action in the name of the script and have it include the actual script. Create one per share. You can then use the trick of .stack $ to guess what action was the appellant.

  X

• Determination of the duration of the .swf file

  I need to find the length of several Flash .swf files, however, I do not have the full program, I only have Flash player. Is there a way to determine the duration (minutes and seconds) of the .swf files (short using a stopwatch ) by the player, or via a plugin?

  Hi UDeckM,

  Duration of the Flash movie is * really * subjective. If it is just a straight line
  movie playthrough (like an animation), then it's all simply a matter of
  multiplying the framerate of the movie (say 30) by the total number of frames in the movie
  (the main timeline _totalframes property). The reason why this is the case
  subjective, however, is because a movie can work on a single framework
  (as more focused on Flash applications do), so this may be entirely incorrect.
  Hope this helps at least.

  Kind regards
  Patrick Bay
  BAY OF NEW MEDIA

  "UDeckM" wrote in message
  News:fnu6g4$o1a$1@forums. Macromedia.com...
  > I need to find the length of several Flash .swf files, however, I did not
  > have
  > the full program, I only have Flash player. Is it possible to determine
  > the
  > duration (minutes and seconds) of the .swf files (short using a)
  (> stopwatch ) by the player, or via a plugin?
  >

• Is it possible to kern (widen the spacing) between letters in the Pages?

  Is it possible to kern (widen the spacing) between letters in the Pages?

  Yes, which version are you talking about?

  Peter