Is it possible to get a replacement of Microsoft Nano Transceiver v1.0 for the Arc touch mouse

Similar Questions

• Replace the receiver for the Arc Touch Mouse

  I have a Microsoft Arc Touch Mouse, and I lost the wireless transmitter/receiver.  Can someone let me know where I can get a replacement? I don't mind to pay for one, but it makes no sense to buy an another new Arc Touch Mouse.  I stay in Singapore, and nobody gave me a satisfactory answer.  Thank you.

  Hello

  You need to contact the Microsoft Replacement Center to check if you can get a replacement.

  For more information, see the article:

  How to replace hardware or lost, broken, or missing Microsoft software

  Also check out the link:

  http://www.Microsoft.com/hardware/en-us/support/contact-us

• Will I get an official update to Android 2.3 GingerBread for the Sony Ericsson W8. Or should I thorow it. :(

  Hi all

  Will I get an official update to Android 2.3 GingerBread for the Sony Ericsson W8. Or should I thorow it.

  See for your mobile (W8) version of android 2.1 is the latest version, and you don't receive news updates from sony

  However, I would not advice throw you: smileywink:

• Get windows store is unavailable, please try again later "for the 3 weeks, what gives?

  Hi MS community

  I just bought a new Acer win8 laptop computer s7 on Amazon.com, but I get "Windows store is unavailable, please try again later" for the 3 weeks.

  Is there a geographical restriction that I'm not a wear of since I reside in Barbados?

  Steven

  Hello

  Run the working WSReset.exe - Win8.1 update being downloaded.

• I downoladed and tried to install CS6 on my computer after that machine has been upgraded to Windows 10.  I get a message that says "serial number is not for the product." The drop-down list does not contain CS6 Design and Web Premium.  What should I do

  I downloaded and tried to install CS6 on my computer after that machine has been upgraded to Windows 10.  I get a message that says "serial number is not for the product." The drop-down list does not contain CS6 Design and Web Premium.  What should I do to get loaded and enabled on my computer?

  That fall down, and the serial number you provide must identify the previous version that you upgraded because CS6 is an upgraded version in your case.

  Error "this serial number is not for a product calling it" | CS6, CS5.5, CS5

  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html

• I have a CS3 for windows and I switched to a mac.  Can I get a mac version without having to pay again for the sequel

  I have a CS3 for windows and I switched to a mac.  Can I get a mac version without having to pay again for the sequel?

  N °

  Adobe offers only a platform Swap on current software: order product. Platform, language swap

  CS3 is also too old to have a "upgrade path" and is no longer sold or taken in charge by Adobe.

  You, as an owner of CS3, are eligible for a 40% discount on your first year of a subscription to creative cloud well: pricing and membership creative cloud plans | Adobe Creative Cloud

  If you don't want to go with the subscription service, Adobe still offers CS6 (4 versions of current & no longer receive updates) as a perpetual license "a time of payment/download": Creative Suite 6

• Broken E320 trackpoint scroll button. Is it possible to get a replacement?

  In a rushed situation, by removing the laptop keyboard to clean, I removed the Middle above the trackpad button, making it break. My question is simple. Is it possible to buy a replacement just this button or do I have to buy a new keyboard/get what he maintained.

  I pulled a little too hard and broke down at the bottom plastic. I guess I'll have to consider getting a new keyboard to get their hands on this button (or just live with it).

• I was hoping to get a replacement drive Microsoft's Windows XP. Is there any hope to do this?

  I bought my computer several years ago and managed to lose my disc that came with my computer. I'm pretty positive it's Windows XP Home Edition, or simply... the credits XP that was on it. ANYWAY. Things that happened and I need to reformat, but I had no disc, I found myself the recruitment of a former hacker friend who has installed an illegal copy of Windows Professional on my computer. BUT. I was hoping to get a replacement for my Windows disk. Is there any hope to do this? Or I have to buy a full version off eBay or something?

  No MS, because XP is long gone. If it came with your computer, you must check with the MFR computer, to see if they have any ideas. They are the ones that have been initially responsible for OEM software.

• I lost my drive, but have the key and book can get a replacement instead of having to shell out for a new?

  The disc was recorded for me and I have the book the product key doesn't just no disc. What do I have to pay for a new? Of course, my lap top is not working now.

  Hi michele18,
   
  -A installation, an Original Equipment Manufacturer (OEM) installation?
   
  If so, you may need to contact the manufacturer of the laptop computer for the installation CD.
   
  If you purchased the CD from Microsoft and installed, contact your team Microsoft Supplemental Parts to the appropriate number provided in the 'Contact Information' section from the link below:
   

  How to replace Microsoft software or hardware, order service packs and replace product manuals

• How to get a list of all available updates and dependencies for the MS products

  We are currently working on a patch report (compliance policies).
  We need to scan all workstations for the patches installed (already DONE!).
  Now we need to get a XML / List / or something telling us all the patches to release MS, affected software and dependence.
  Any help?

  See if this sugesstion can help you to:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/6da1bc16-9919-4762-85D5-95dee3aa15fd

  Take a look at this link and see if it helps-

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/a75f8d76-8689-4661-A546-90b555d80c9d>

  Windows XP security updates and patches for 2010

  http://www.softwarepatch.com/Windows/Windows-XP-security-updates-2010.html>

  03/23 / 1107:12: 05:00

• How can I find a replacement for the keyboard and mouse Microsoft Sculpt?

  A feafae of replacement can be ordered if I broke one for my mouse wireless Sculpt & keyboard?

  My apologies, Mark;

  The link is broken for the validation of my answer somehow. I fixed it and here is another.

  Microsoft Hardware support

• Is possible let activate domain multi UCS VM - FEX and sign up for the same vCenter

  Hi Experts,

  We have 7 domain UCS. But only a vCenter. Now, we want to enable VM - FEX on each UCS area and sign up for the same vCenter. Is - it work? I have found no description limit configuration on this relationship.

  Or we create 7 vCenter for each UCS area? (But I think it's not sense.)

  Best regards
  Meng-Yuan Hsieh (Nick)

  Hi Moua!

  I open a TAC case on that, and after that many discussions with Cisco, connecting several areas a single vCenter UCS is supported.  However, it turns out that Cisco failed to document this and how to make it work.  You will find that the procedures were written in old documentation for VN-LINK and others for VM - FEX.  This documentation shows that it is necessary to create new certificates, and it must match the key to expansion.  This is NOT true nor with the new versions of UCSM and vCenter.  Cisco, said they will update their documentation.

  Here are the steps that we took to connect two UCS areas for the same vCenter using default self-signed certificates.  I hope this helps...  Please mark this message as the right answer when you get a chance.  Thank you!!

  vCenter Version: 5.5

  UCSM Version: 2.2(5a)

  1. On the VM in UCS Manager tab, click VMware.
  2. Set up a key of the unique extension for every area of UCS.
  3. Click on "Configure VMware integration" on each area of UCS and export expansion of local storage.
  4. Install each UCS domain extensions in vCenter.
  5. After you install the extensions, back to UCSM and click Next where you left off in configure integration with VMware
  6. Run the wizard and after that it's over, areas of the UCS should now be connected to the vCenter.

  

• I would like to know if it is possible to change my version of WIN of Premiere Pro CS4 for the MAC platform.

  I would like to know if it is possible to change my version of WIN of Premiere Pro CS4 for Mac.

  Thank you for any information.

  N ° platform Swaps apply only to the last version that was CS6. Apart it's a moot point - CS4 is not compatible with the current versions of Mac OS X, anyway.

  Mylenium

• Help! -What creation customer I get this ERROR "To provide a positive whole number for the amount of the minimum balance customer or per cent balance amount overdue type is amount or percentage respectively."

  What creation customer I get this ERROR "To provide a positive integer for the customer minimum balance amount or percent when the balance amount overdue type is amount or percentage respectively."

  I tried troubleshooting when I saw the other post and created a new class of customer profile, but still get an error, even if I created another profile as below and existing it attached to another customer that has worked, but when I tried to create a new customer it still gives me the error. I use Oracle Applications R12.1.1

  
  Steps I followed to create a new customer profile

  = Make sure that the new class of customer profile that allows you to create is in the active state. Cross check the steps below when you define a class Profile of the client... e.g. name: by DEFAULT (and active)

  (* 1) profile of class tab :*

  ) a FWD billing balance: not enabled

  (b) billing-> tax print (summary by name of tax), consolidation of rule (DEFAULT)

  (c) define the conditions according to your requirement, allow the delivery & terms of substitution

  (d) Dunning set according to your requirement,

  (e) filled in info collectors according to your requirement of credit check enabled...

  (f) reception-> auto cash rule defined as 'Standard '...

  *2) Load profile * ended it according to requirement

  *3) Amounts class profile* for example say currency defined as 'USD '.

  (a) credit limit: 100000

  (b) limits of credit order: 100000

  (c) minimum amount: 1.00

  (d) statement amount min: 1.00

  (e) do not put any value in the type of exchange rate (for example, monthly, Plan etc...)

  (f) minimum customer balance: Amount-> value: 5.00

  (g) minimum balance Bill: Amount-> value: 5.00

  (h) right to minimum per invoice: 1, the maximum charge per invoice: 100 under the interest Charge

  (i) Reference Type as a set rate, value: 10

  (j) you can avoid using the penalties for now...

  Step - 2_ one) open a customer... * go to Bill the site details *-> click on the profile tab-> under class profile field please include new profile class that is created by you (for example, by DEFAULT). (b) go in the sizes tab profile-> Click (Show) on currencies USD-> check the establishment here as well, I could see it.

  When I tried to create a new customer using the new profile, it's repeating the same mistake. Help, please.

  Thank you for your reply Emmanuel.

  Sorry could not inform earlier, I tried at first with my amount of class XX profile newly created for all currencies. But he has not solved.

  When I changed the default profile for all the currencies class. It is resolved.

• I'm trying to get a style switching to go to my site (for the color palette)

  I would like to give my users the choice to change the colors of my site ( http://chaoscoalition.net) at will, through css style, change the buttons such as those on the theme of the forum ( http://forum.chaoscoalition.net).
  
  I read a lot of articles and tutorials on how to put in place the other stylesheets of a Web page, but I can't do the things well. Whenever I have seem to have gotten the right, either open the php file that sets the cookie, or it opens the stylesheet text. I want to end up with something like the forum theme change module, but for the home page.
  
  I have 5 different versions of the done page, just like pages (format php), but I do not understand how to link the buttons at the top to trigger change of style sheet, and I don't even know if it is possible to rely on a css file to change the color scheme of the page (which is based on image).
  
  It would be great if someone could walk me through it, or offer a tutorial that explains how to do from scratch.
  
  Thank you.

  I have a gross example of a style sheet changer, that put JavaScript in place on this
  page. Your CSS can change what you want (color scheme, page width,
  etc...).

  Look at the source code in your browser to see how it is implemented.

  http://ALT-Web.com/templates/variable_width.shtml

  And the script can be found here:
  http://ALT-Web.com/scripts/changesheets.js

  --
  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  www.Alt-Web.com/
  www.Twitter.com/ALTWEB/
  www.Alt-Web.blogspot.com/