Is it possible to manually install XP SP 3?

Similar Questions

• What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  I'm running an integrator system Windows 7 64 bit on an older system. What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  Original title: Windows 7 OEM System Builder

  I'm running an integrator system Windows 7 64 bit on an older system. What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  Yes, you can reinstall Windows 7 OEM System Builder License on the new hard drive with the new processor.

  It will not be a problem in this case, since you don't "move" installation, you are doing a new installation. The less it will take is activation of the phone, as you change the hard drive:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• How to manually install the old Mac OSX flashplayer.app

  Hi, I need to downgrade FlashPlayer for a certain software from Leap Frog connect CFT can use it.

  LFC reported adobe flash players archives:

  http://kb2.Adobe.com/CPS/142/tn_14266.html

  When I extracted the version specified, it gives me ONLY a "Flash Player.app" (not an Installer).

  MY QUESTION IS where manually install the flashplayer.app while it is committed?

  (I tried to put in Applications, does not work)...

  Mac G4 10.4.11

  Hi, for following my last post on holding off. What are the browsers that you use?

  Leap Frog recommended version is the one you want, not the one you have open. HOWEVER, the vs 10.0.45.2 is a very old version and has no security patches which have the 10.1. It's one thing. The other is that if you use a browser and install this version 10.0, sites that have updated for the 10.1 and last may not work correctly.

  What I would say to you, is if you need to install the vs for the needs of Leap Frog, and then to do it in a browser and use to Leap Frog.

  Install in another browser, the latest version of Flash Player vs 10.1.102.64 so you can access the Web sites that have updated.

  Now another thing, the browser that you choose to install the 10.0, you will need to uninstall everything that is there first, restart and then install and reboot again.

  If already, you use a different browser and install the latest FP in it and already have an older version installed, then you must uninstall in the same way.

  Hope that it is not confusing, but let me know.

  Thank you

  eidnolb

  P.S. I'm on a fine late lunch and check your answer as soon as possible.

• Operating instructions: how to manually install updates and difficulty stucked relies

  OK I finally got, and here is the update method. It is completely safe and if a problem occurs, it will stop and you can restart your TPT as always.

  Here are the steps :

  1) you have to download the firmware here:

  http://download.Lenovo.com/slates/think/tablet1/

  (seems its not available and they were fired 0075 day, but it will be word for any updates)

  Improtant : If you're on 0052, you must manually install 60, then 65 and 75. In other words, you cannot go from 60 to 75.

  2) you have to paste the firmware in .zip format (exactly as you download it) on your SD card.

  3) restart your TPT. When the screen lights up, start pressing Volume up for several times. You will see that you go to the recovery image, she writes. Wait...

  4) now that you are in recovery mode. with press volume up and down, you can navigate and pressing the button walk / stop, you enter the menu. Choose "install the update from SD card" and choose your firmware (with the sequence) .and wait device finish its work.

  Fact!

  (Edit #1: If you're stuck on an update and the update of your system does not work and also you do not use the manual update - which is not harmful at all - you can follow this method: for example, you're at 0052 - who stucked as many people on this build - if you manually install 0060) , your TPT will update to 0060, DO by WHICH as long AS. just try a few other goofy, which is not the next generation. TPT will try to update it will stop because of the mistake of sequence, but it will fix the update of the OTA system, fun)

  TNX to Hongkong,

  0075_US link:
  http://download.Lenovo.com/slates/think/tablet1/ThinkPadTablet_A310_02_0037_0075_US.zip

• Manually install the update on the Server 2008 R2 - FATAL: unable to connect to service (hr = 80004002)

  When you manually install Windows updates on our server, we get the following error message:

  Setup Windows Update Standalone - Setup has encountered an error 0 x 80004002 - no such interface taken in charge.

  What follows is also found in windowsupdate.log

  2016-01-26 21:26:47:489 8340 1 b 10 Misc = process: C:\Windows\system32\wusa.exe
  2016-01-26 21:26:47:489 8340 1 b 10 Misc = Module: C:\Windows\system32\wuapi.dll
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI - COMAPI: IUpdateServiceManager::AddScanPackageService -.
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI - ServiceName = Windows Update stand-alone installation
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI - ScanFileLocation = C:\97a2ae7429fcb9d0e21f1eb1a047983b\wsusscan.cab
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI FATALE: unable to connect to service (hr = 80004002)
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI WARNING: failed to connect to the service. (hr = 80004002)
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI - exit code = 0 x 80004002

  Is there a way to repair the wusa.exe?

  Sorry, evil forums. Server issues are better managed on Technet. TechNet - Microsoft forums

• I have to manually install the driver for Aspire ZC-102, updates when I move Windows 8 to 10?

  I have to manually install the driver for Aspire ZC-102, updates when I move Windows 8 to 10?

  I was struggling with this ACER for more than a year. I have do it I have back when it was still under warranty, 14 months ago. Now I've updated free online through Microsoft for Windows 10 back in early August. I had hoped that my mess was a stack of the operating system, but unfortunately, it's still a piece. However, there is no virus. I run Malwarebytes Pro full time with it has quarantined of PUPPIES as well as McAfee Anti Virus full time. I use cCleaner to keep cut up. I NEVER garguillo or browsed porn.
  I've got max 16 GB of RAM. I have very few applications other than Office 2013.

  Even if this thing was a room at the time where it was running Windows 8 and 8.1, so I want to try to make it work on Windows 10 without having to start over with a clean install. That's why I asked about the drivers.

  your ZC-102 will not have a direct drivers updated from Acer support, which means you have to rely on Windows Update by itself the drivers or get them by yourself.

  Let me give you 3 Tips:

  1) never use Registry cleaners Windows 8.x and above all, they are no longer needed

  (2) uninstall McAfee, he kills the performance of your machine, use the antivirus windows integrated, it is good and very light

  (3) If you require loading time fast on programs, think about an SSD upgrade

• How to manually install windows vista (KB929777)?

  I can't get this to load. I had to reload windows Vista and present an update is my cock.

  Separated from -.

  https://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/how-do-you-manually-install-Windows-Vista-KB929777/29958efd-3019-4219-8285-3e5daa43b165

  Hello BryneMoore,

  Could you please turn the following

  1. Press the Windows Logo key + R-> Type WUAPP
  2. Go to View Update History
  3. Go to installed updates
  4. Find KB929777 and remove KB
  5. Reset
  6. Re install updated via WUAPP and restart.

  Profit?

  EDIT

  Adding to this do the following if the said above fails...

  Was it a custom build computer? Curious...

  Try to remove all the RAM and leave only 1 stick of RAM in your computer.

  then try to update.

  Answer if not

  Thank you

  -John

• boring updates failed. I've tried manual install. diasnostics etc...

  Original title: updates do not...

  Finally got fed up with all those annoying updates failed. I've tried manual install. diasnostics etc...

  theres a list of all of my updates from the bottom to the top. not sure whats causing it or what to do about it.

  If you have solutions of repair I should try or links to display more information let me know. theres also some info on my computer down basic

  relatively new computer, only one year. Intel card mother aswell, with nvidea gpu gtx660.

  all the solutions to this problem would be great :)

  Thank you guys

  

  If you have started facing problems with Windows updates recently, we recommend you to go for a system restore restore your system to a point, while it was working fine. To learn more about the system restore, you can refer to the section "Restore your PC to an earlier point in time" on the Microsoft support at the following page:
  http://Windows.Microsoft.com/en-in/Windows-8/restore-refresh-reset-PC

• I keep getting error code U44M1I210 even after manually install Camera Raw 9.5, what can be the problem?

  I keep getting error code U44M1I210 even after manually install Camera Raw 9.5, what can be the problem?

  

  U44M1I210 - creative cloud help / error U44M1I210 | Install the updates:

  http://helpx.Adobe.com/Creative-Suite/KB/error-u44m1i210-installing-updates-CCM.html

• Is it possible to manually set the HTTP_REFERER?

  Someone if it is possible to manually set the CGI. HTTP_REFERER? If so, how do I to achieve?

  Thanks a lot for all the help. I got it working now. There is no problem with the . It was a newspaper in the that I tried to connect the session variable that was not defined and not exists. Thus, it throws the error.

  The original question on unable to redirect has been fixed. The issue that he maintained the closure was because the way I test if the user is logged on or not does not. Since I'm on CommonSpot CMS, he used their API isLoggedIn and he did not give me the value that I wanted to test the authentication status of the user. So, I set a variable session.mysiteShibboleth.isAuthenticated and checked for this on the details page. It now seems to work.

• Can I manually install a trial downloaded with the wizard?

  I try to install Photoshop Extended CS6 under Ubuntu/Wine (which I've done before, successfully with PS7 and PS CS2 to our Institute). Unfortunately it is no longer available via Download Wizard, which takes place under Ubuntu/Wine, download stuff, but then get completely blocked 'extraction '.

  Can I manually install the trial?

  P.S.: except a bug with the Brush tool, CS6 obviously work under wine, see: http://appdb.WineHQ.org/objectManager.php?sClass=version & iid = 25607

  Yes, you can download the trial PS CS 6 from here: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  Make sure that you follow the steps before you start to download

• Is it possible to not install all software in CS6 Adobe Master Collection?

  Is it possible to not install all available software in CS6 Master Collection that my computer does not respond to the demands of one of the programs that is Adobe Speedgrade?

  Yes, the installation program displays only the software that will install on your computer.

  If you have a 32-bit system (so no Speedgrade) then be aware that Premiere Pro and After Effects also are 64-bit only and will not be installed on a 32-bit system.

• Install Error 1935 in the event log when trying to manually install the KB954430

  Vista Home Premium 32 German

  Automatic update of Vista tried every day to install the fix KB954430 (MSXML Core Services 4.0 Service Pack 2).
  
  To resolve this problem, I tried one of the suggestion of many to install this fix manually.

  So I downloaded msxml4-KB954430 - deu.exe Microsoft.com and all first I removed the patch, then I did a reboot and then I started the installation as an administrator.

  During the installation, I got the error in a message box:
  "During the Assemblierungskomponente {DA656E4D-45B9-3659-A06B-D6B9ABF34537} ein Fehler aufgetreten ist der installation. HRESULT: 0 X 80073715. »
  = during the installation of the component assembly... an error occurred...

  After a click on the ok button, the installation was cancelled.

  The event log entry:
  Product: MSXML 4.0 SP2 (KB954430) - Fehler 1935. During the Installation der Assemblierungskomponente {DA656E4D-45B9-3659-A06B-D6B9ABF34537} ist ein Fehler aufgetreten. HRESULT: 0 X 80073715. Assemblierungsschnittstelle: Returned IAssemblyCacheItem, function: commit, Assemblierungsname: Microsoft.MSXML2R, type = "win32", version = "4.1.1.0", publicKeyToken = "6bd6b9abf345378f" processorArchitecture = "x 86"

  I already know:
  http://support.Microsoft.com/kb/941729
  http://support.Microsoft.com/kb/936181

  What can I do, to make this boring, works of hotfix update works not properly?

  Thank you
  Wolfgang

  Hi Wolfgang,.
  If it's for a computer language Duitsch, I recommend that you visit a site from Microsoft speaking German to get the best possible help to your question.
  Please follow the link below.

  http://support.Microsoft.com/common/international.aspx

  Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite of 850 - is it possible to I install Win 7 - if so, how?

  I was in a hurry to get a laptop for a job and got a Toshiba Satellite 850, which comes with 8 pre-installed windows.

  I absolutely hate it and assumed I can just wipe everything and put it on a windows 7.
  After reading many advice forums, it seems that this machine is designed for windows 8 and I can't remove it easily. So I am completely and totally disappointed.

  Is this really the case? Please tell me this isn't.

  I urgently need an answer that I start to work in the morning and I need Win7 installed to work.

  You really are a funny guy blame you laptop manufacturer, because you are not able to install Win 7?
  I guess you do this out of ignorance... you don't know how exactly...

  All first of all laptops of all manufacturers of laptops that are pre-installed with Win 8 supports secure boot UEFI BIOS. Here are the requirements of Microsoft.

  Second: It is possible to install Windows 7 on all laptops; It doesn't matter which was preinstalled. But he should know how to do this...

  You said that you are owner of the Satellite 850. But what series? L, A AND C?

  Now some basic info:
  To boot from external sources: CD/DVD drive, USB, etc. You must disable secure boot and go the CSM UEFI.
  http://APS2.toshiba-tro.de/KB0/TSB2B03F30002R01.htm
  It seems that you have done this that s good.

  Keep the SATA option in AHCI mode.
  When setting up installation of Win 7, you will be asked to add drivers (SATA drivers)
  Download driver Toshiba UE page, put it on the USB key and add it to the installation of Win 7.
  Now Win 7 must see HARD drive and you should be able to install Win 7 on the new partition.

• Pavilion 15-P001TX: RAM manually installed in the laptop

  Hello.

  I have a laptop HP Pavilion 15 - P001TX, which has 4 GB of RAM, integrated into it. Recently I realized that for the purposes of my work, the 4 GB of RAM provided is not enough for me, so I want to buy another 4 GB of RAM and install it into my laptop, my 8GB memory total. In this regard, I have a few questions:

  1. can I install the RAM manually by opening the Panel of the laptop inside of myself? There are several slots of RAM for my laptop?

  2. doing so Will void my warranty?

  3. If my warranty will get Sub, can I buy a new RAM and ask the people of HP's service center to install it for me?

  4 RAM which company will be more suitable for the model of my laptop?

  Thanks in advance.

  Kind regards

  Rishi.

  Here is the Service Manual:

  Manual

  See pages 106-117 for the installation of the memory. It requires the removal of the motherboard and puts at risk the warranty.

  On page 3, it shows that the Intel models have only a slot of memory. I think it's probably true for the lower end of Intel models and yours is an i5 so I think that yours has 2 slots memory I can't find documentation so you be sure had better assume she's a. So to have 8 concerts would require the purchase of a module of 8 GB.

  HP part number:

  Module of memory of 8 GB 670034-005

  http://www.Amazon.com/HP-693374-001-1600MHz-PC3L-12800-memory/DP/B00G2F3I4W/ref=pd_sim_sbs_147_6?ie=UTF8&refRID=0F6ED1G94P46SD4A2NPS

  Where do you live (single country) as this can impact your HP support options. I heard, in some countries, the Service Center will install memory that you buy from them if the laptop is still under warranty.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.