Is it possible to open several windows in firefox 5.0? I can't do windows quick launch and the right click "open in a new window" does nothing.

Yes, not much more to say. Since I've upgraded to firefox 5.0, I opened several windows. Several tabs to work, but I don't like tabs. Help, please.

See if they work in Mode safe mode, which is very easy to test Firefox 5.

Safe mode: to appear in safe mode, a time when you do not not tick the subjects (they are definitely not safe). Help ('Alt + H") >"restart with disabled modules. If there is no problem then it is almost certainly of an extension.

If it works, try to find the addon (s) causing the problem.

  1. Disable half of the extensions and restart Firefox. At this point, you are no longer using safe and test extensions.
  2. If the problem persists, disable half of the other extensions

If it does not work select last half of people disabled
Then restart. and check again at step 2.

In case of failure to isolate the problem return answer and so resolute mark thread as resolved.

Tags: Firefox

Similar Questions

  • Now CTRL when you click on a link is not open it in a new tab; does nothing

    When I try to open a link in a new tab holding the key CTRL key while clicking on it does nothing. Does not open. Tried to reboot in safe mode with disabled modules and had no joy.
    Also don't get no menu when using the right click, also tried in safe mode, also nothing.

    Click to open a link in a new tab.

  • Using firefox 14.0.1. Load a link using the right click and "Open link in new window", translates into a new window opens but doesn't show URL address bar...

    Using firefox 14.0.1. Load a link using the right click and "Open link in new window", translates into a new window opens but doesn't show URL address bar. However, if I click with the right button on a link and select "Open link in a new tab", the tab displays the URL in the address bar. If it works when a new tab it's not in a new window.

    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
    Note: This will make you lose all the Extensions, open Web sites and preferences.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

  • How to disable the right click menu of office options in windows 7 64 bit PC?

    On right-clicking on the icon/file on the desktop, we get several options such as open, open with, cut, copy, delete, rename, scan with etc.; There's also the uninstalled software options - such as video to convert. Scan with NPAV. I want to know how to remove these options because they are redundant. For example I have uninstalled the antivirus NPAV software and replaced by MS essentials but the right click shows the two options of scan with MS essentials and NPAV. In the same way convert video option does not work as I uninstalled the trial version of the software that was pre-existing when I got the PC.

    So, how to remove these redundant click on options on the right.
    Windows 7 64-bit PC - system
    Image attached-
    Or download ShellExView
    Download ShellExView for x 64
    Organize items by Type and then highlight the type of context Menu items
    delete the ones you want
  • I can't use the right-click in the windows Explorer window

    I use windows 8.1, hp pavilion touchsmart nb x 64. my windows explorer suddenly went wrong. I can't use the right click.
    Please help me, I can't access my data

    Hello

    Try running windows System Restore - choose a restore point at least 24 hours before the occurrence of the problem with the context menu.

    A guide on the implementation of this can be found on the following link.

    http://pcsupport.about.com/od/Windows-8/FL/system-restore-Windows-8.htm

    Kind regards

    DP - K

  • Is it possible to customize the right-click menu?

    I use FF4 RC2 and I wonder if it is possible to customize the context menu? In FF3 if you right click on a tab lists ' new tab '. Reload tab reload all tabs... "etc. but in FF4 if you right click on a tab lists only "Reload Tab | PIN as App Tab... "etc.

    I really really use the right click-> new tab in FF3 A LOT! It was a HUGE disappointment for me when I started using FF4. Is there anyway that I could add the button tab in the right click menu?

    Thanks in advance!

    Not that I know of. You can use file > new tab or Firefox > tab in addition to what I posted above.

    Maybe an extension like Tab Mix Plus can add this feature in the context menu of the Tab bar.

  • Is there a difference through the add printer from the Menu then simply open the print server in the Explorer, and then right-click on the printer you want, and then hit?

    Add a network printer (add printer vs right-click-> Connect)

    Hey just have a quick question that I can't find anywhere.

    To add network printers is there a difference through the add printer from the Menu then opening just the print server in the Explorer, and then right-click on the printer you want and pressing on connect?

    Hello Doughty08,

    No, there is no difference. Both methods will install the same printer available driver and the two will work the printer even.
  • Change the option of folder icon available in the right-click context menu in Windows 7 Explorer

    Hello:

    I want to be able to change the icon of a folder in the "context of the folder right-click menu' (as other choice such as: copy, paste, rename, etc.) instead of having to navigate to-> propierties of the folder-> customize-> change icon.

    Is it possible to add this option via regedit?

    Thank you!

    Hi Soul-Hunter,

    You will not be able to add the ability to change the icon of the folder by right click of the mouse and you can add that to the right click menu, this is normal.

    However, if you want to make a right click on the folder and change the folder icon, follow the steps:

    1. right click on the folder that you want to change the icon.

    2. click on properties.

    3. click on the Customize tab and click on Edit button icon under the folder icon option.

    If you want to make a suggestion or give your feedback on the product, you can access the link below and post it.

    https://connect.Microsoft.com/default.aspx

    Thank you and best regards,

     

    Srinivas R Microsoft technical support.

    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • I want to rearange the menu of the right click of the mouse to the option open a link in a new tab I 2nd from the top.

    I have the new Firefox and 2 options to open a link has moved between them by confused surfing with new windows that open instead of new tabs.

    See:

  • My 8 Firefox Menu button does not work and neither does the right click in the window of firefox

    It seems that all drop-down buttons in the browser, including the bookmarks dropdown in the toolbar and the main menu button (firefox), no longer work. This happened after that I upgraded to firefox 8. I tried uninstalling and reinstalling several times all also the removal of the preferences user and all that but that does not work. But everything seems to work properly in safe mode. So I disabled all my addons in the normal mode, but cela still does not resolve the problem. My right click does not anywhere in the browser window either. And also, although the menus are not displayed, it seems that they are still there because if I click in the area that a the function button active, that's how I was able to disable addons.

    Safe mode disables extensions in Firefox 4 and later versions, and disables hardware acceleration.

    • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

    If disable hardware acceleration works then check if there is an update available for your graphics display driver.

  • Pavilion15-p018nz: Windows logon screen does not display the symbol of 'the eye' to reveal a password and the right arrow (input)

    Which connection to Windows 8.1 the eye symbol and the symbol of the arrow to the right were posted up to that (I think so) after an automatic update of Windows. As I was intending to migrate to Windows 10 I na not invest a lot of research on this problem. Now, after the migration successful Windows 10 Home the problem still exists. After typing the password I can't check it out because the eye symbol is still missing and I have to press 'Enter' because of the clickable right arrow missing for the opening. All this happens with a Microsoft online account. I created an account local and with that, the symbol of the eye, but not the right arrow reappeared. Thanks a lot for help.

    Hi there @CKURT

    Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff. I understand that you want to activate the icon reveal password for your system. I'm happy to help you.

    It depends really on what version of the operating system you are running, because this kind of thing is normally controlled by using the Group Policy Editor. This tool is not a part of a home edition, you need the Pro version or later version for that.

    Assuming that you do not have a pro edition or higher, then it can be a help to you:

    5 ways to access Local Group Policy Editor on Windows 10 - isunshare.com

    Disable or enable the new feature button to reveal a password in Windows 8 - windowsclub.com

    Unfortunately, the version of Windows 10 I installed next to me is that the home edition as well, so I can't access to this, to check, so let me know if it works for you.

  • Cannot open files or accessory by double-clicking, should use the right click and select 'Open' to see all attachments or open any document/photo/etc.

    I have all of a sudden, am more able to open anything in my library or by email by double left click on the item.  Now... I have to either save and open by selecting open or simply I am unable to use my computer to see anything which requires the opening.

    What is everything?  How to fix?

    There was a similar... in fact same post in Windows 8... but nobody will suggest reasonable fixes...

    Thanks if you can help...

    Right click, choose 'Open with', and then choose by default, which will fix it so that when you double-click on it uses the one you have chosen.

  • After the launch and the release of Cisco close Windows loses the functionality of micro.

    If I run the Cisco close Windows application, I lose the microphone feature. I understand from the client accesses the pair with the SX camera microphone.

    But if I left out the functionality of client micro does not. I need to restart my computer for the features come back.

    No reason as to why this is happening?

    This looks like a driver problem. First of all, try to see if you can find a newer audio driver, may also update drivers for related equipment such as the dock and the chipset.

    If this does not help, you can try to see if disabling exclusive mode. If off exclusive mode help the issue, but makes it impossible for you to connect to the codec, check all the settings recording. You may have to disable all effects microphone such as the cancellation of the echo for your card to work without exclusive mode.

    Comments on how you price and information about what hardware you use, would be great if we can help others in your situation as well as possible.

  • Windows 7 freezes for the right click devices and printers don't is not loading

    I support for a local photography studio and built all of their computers. One of their photo editing machines faced some weird problems I can't solve.

    It is currently running Windows 7 Ultimate 64 bit. About two months ago the mainly the user complained that a right-click on a folder or a file on the desktop would cause the computer to freeze. She also noted that devices and printers would not have been responsible. We finally just did a clean install of Windows, and that seemed to fix the problem...

    .. .for a while.

    About two weeks, the same two problems returned, now it is intermittent. The user declares every morning, she has him restart the computer several times, but then everything works very well for the rest of the day. But while it comes in the next morning, and it does the same thing.

    I tried manually reset the BIOs, turn on Bluetooth Services (even if that computer does not all bluetooth devices) and play with Windows registry a bit, but because the problem is not compliant, it is very difficult to solve.

    I don't know if it's a hardware or a Windows problem. All the tracks would be greatly appreciated!

    Check the report viewer for all errors that occur.

    Clean boot the PC and redo the test

    Run a memory test and a test HD

  • Edge animate CC hangs on the right click on any object in the window elements

    Hello

    Whenever I right click on an object in the window elements that animate crashes on me.

    Same thing happens when I click on the button "Open stock" - "{}".

    I would really appreciate some kind of help with this problem, because I am able to do anything in this way.

    I'm running on a MacBook Pro 3.06 GHz Core 2 Duo - OSX 10.9 2010

    Adobe Edge CC downloaded today through creative cloud

    Thanks in advance,

    have a nice day,

    Anne

    I searched a lot, but I think you meant .../appilication support /... and not... / preferences /...

    I've renamed now and has opened the program...

    He did not create a new folder of that type,

    BUT

    the problem seems to be gone for now!

    I'm really happy about that!

    Thank you very much...

    If the problem persists, I will answer here, let me first work a little with one now trying all the possibilities to reproduce the problem.

    Thanks again for your help...

    I'm still confudes how to rename the help file ' 3.0.0"and it rename"Leading Edge"there isn't, since one is inside another

    Have a great day!

    Anne *.

Maybe you are looking for