Is it possible to play an audio file of labview (using myDAQ)?

Similar Questions

• import an audio file instead of using micro

  in the future, it will be possible to import an audio file instead of using micro for the lip sync?

  It is already possible to synchronize lips without using a microphone. Import a file (File/Import) a wav or aiff. Drag it into the scene. Select the puppet that you want to synchronize lips. Then click on timeline/Compute Lip Sync audio of the scene.

  You can also play audio files on your computer and, if the system audio hardware preferences are configured correctly, lip sync that activating the microphone.

  

• How can I play flac Audio files with extension on windows media player

  How can I play flac Audio files with extension on windows media player

  Hello jesskenneth,

  Thank you for visiting the Microsoft answers Site.

  The extension Flac is not a type of supported Windows Media Player file. However, you can user your favorite search engine to search for a solution that can convert the file in a supported file type Windows Media Player.

  For more information on the types of files supported by Windows Media Player, you can also view the following link:

  Information on the types of media files that supports Windows Media Player

  Thank you

   

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows media player plays most audio file but the 0r 5 last 10 seconds are crackling

  Windows media player plays most audio file but the 0r 5 last 10 seconds are crunchy, why?

  The following article might be worth a visit:

  Windows Vista - How can I stop my music skip or break down when I play?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it

• How to play several audio files at the same time and mute toggle some voices?

  Hi all

  Forgive me if this is mentioned elsewhere and kindly point me in the right direction.  I'm a kid with flash and action script so if you are in doubt, error on the side of more specific in your response, there is a lot of vocabulary I still don't know.

  The goal:

  I have 4 audio files which are Soprano, Alto, tenor and low voice of a musical example.  The result should allow the user to play all 4 voices at once and dumb voice specific to hear all the possible combinations of voices playing together or solo.  I imagined a check box at the beginning of each rated musical line that puts that voice muted when checked.

  It would be ideal to have the game, interrupt and stop reproduction choices where 'Stop' resets playback at the start and 'Pause' maintains the current place in time and takes over from there, once playback is started again.

  I am able to get the simple audio files to play from a single button, but I am struggling to find how to link multiple audio files to start at the same time by a single button.  I found this link: https://forums.adobe.com/thread/1069107?start=0 & tstart = 0

  where the last message mentions the use of tables, but being a complete beginner, I don't completely understand what they are doing.

  I know it's a big piece of questions at once, but if you could meet any part of it, or direct me to a tutorial/instructions, I would really appreciate it.

  Thank you for taking the time to help others

  use:

  kglad wrote:

  use:

  import flash.events.MouseEvent;

  import flash.media.SoundTransform;

  var soprano: Sound = new Soprano();

  Var high: Sound = new Alto();

  var tenor: Sound = new Tenor();

  var bass: Sound = new Bass();

  Ash var: Array = [soprano, alto, tenor, low];

  var offsetA:Array =]

  var st: SoundTransform = new SoundTransform();

  play_btn.addEventListener (MouseEvent.CLICK, playF);

  pause_btn.addEventListener (MouseEvent.CLICK, pauseF);

  stop_btn.addEventListener (MouseEvent.CLICK, stopF);

  playF function (e: MouseEvent): void {}

  for (var i: int = 0; i)< sounda.length;="" i++)="">

  This ["sc_" + i] = [i] Sunda () .play;

  }

  }

  function pauseF (e: MouseEvent): void {}

  for (var i: int = 0; i)< sounda.length;="" i++)="">

  offsetA [i] = this ["sc_" + i] .position;

  This ["sc_" + i]. Stop();

  }

  }

  function stopF (e: MouseEvent): void {}

  for (var i: int = 0; i)< sounda.length;="" i++)="">

  offsetA [i] = 0;

  This ["sc_" + i]. Stop();

  }

  }

  function unpauseF(e:MouseEvent):void {}

  for (var i: int = 0; i)< sounda.length;="" i++)="">

  This ["sc_" + i] = Sunda [i] .play (offsetA [i]);

  }

  }

  function muteF(i:int):void {}

  St.volume = 0;

  This ["sc_" + i] .soundTransform = m;

  }

  function unmuteF(i:int):void {}

  St.volume = 1;

  This ["sc_" + i] .soundTransform = m;

  }

• It can't be this hard... a button that when you click on it plays an audio file...

  I recently downloaded the trial version of captivate 4 and tried to create a button that when clicked on time an audio file.  Apparently, when you link a file to a button the audio file plays as soon as the button and not only when clicked on.  I also tried using the command to play a file/url as an option, but the file is started in windows media player and not only played by captivate 4 if clicked.

  I know it's the simplest question, but I can't find anywhere on the user guide that meets.

  Thank you in advance for your help/suggestions.

  Sasha

  Hi Sasha,

  Please take a look at the Captivate project. See if this helps with your problem.

  Manish

  http://blogs.Adobe.com/Captivate

• Walkman play all audio files.

  All my audio files are in the walkman. including my recordings. My whatsapp audios. How to hide?

  Try this link

  Worked for me. But you can appearently send .nomedia file via bluetooth. I put in a rar file and then sent via bt then it extracted in the media of whatsapp folder.

  There are also a few apps that do the same thing. Search playstore for nomedia you will find a test lot choose you.

  The fault is in fact belongs to other applications on this issue. They should hide their media to the players themselves. I mean that their developers should do.

• T400 adding 2nd HD for audio files, any PERSON using Ultrabay Adapter II successfully?

  I use my T400 to record the audio in my project studio. I would add a second HD for audio files and the content of the programmes.

  After some searching of web and because of my current installation, would like to know what additional HD system would work well. I'm happy with my system, but see some stuttering and dropping out of school. I run a MOTU light Ultra in the 4 pin F / w.

  1. I can use the Ultrabay, with SATA adapt II to drop in Seagate Momentus 7200, SATA300, 320GB, which hopefully will be compatible. I saw a post that this works like SATA300.   2 I could use a glyph Portagig 7200 RPM 320 GB, 800 F/W or USB as an external hard drive. I need Garland who at the MOTU F/W400 to connect, I'd be from ports. I don't know if USB would be as good on transfers.  NOTE: My Card/Bus Express slot is in use for other attachments.

  Is someone using a second HD with any one of these methods successfully?  I would go on the road II Ultrabay adapter, to be able to use my other attachments when editing.  CD/w could come back when I need to burn a finished product.

  No matter who sees all conflicts, I, as a beginner, do not see?

  Thank you

  Thanks to all who responded.  I was out of town, without my password.

  Bill wrote:

  I have several IIs adapter Ultrabay and they work very well with a variety of SATA 2.5 "drives for my purposes

  *********

  Dr. Khan wrote:

  Yes. It will work with no problems atall.

  I personally use one. So far so good...

  **********

  I started to pick up after a previous thread by Dr. Khan, stating that its SATA 300 disc had worked. So thanks to both for the

  conformation.

  Kawika says:

  But, seriously, I recently returned to the field / natural records, particularly indigenous and endangered forest birds. I am quite amazed at what I can get out of this PCM recorder (Oly LS-10 w / depth of 24-bit 96 kHz, AudioTechnica and Sennheiser microphones, Sony flat). Workstation is with WavePad for a function I use, noise reduction and then Raven for sonogram analysis and noculars. I looking for something that compress the "echo" the file and did not find something suitable. The Oly came with Cubase LE 4 of Steinberg, and I get a little, um, stunned, when I look at that too long. Newbing all over again, so maybe you have suggestions? The long-awaited T400 replaces my current T41 which, well, gets a little upset at times.

  *******

  Yes, I the Oly LS-10, a very good hand unit.  I also received the Cubase LE 4, but for me, its got a steep learning curve.

  Much more easy DAW is all on a single page of Mackie Tracktion 2 or 3. Very easy to learn and your final product will be just as

  professional such as Cubase. If you learn Tracktion, you will have an easier time with the more complex Cubase.

  http://www.Mackie.com/products/tracktion3/ check it out.

  ***********

  Zilla wrote:

  So, to be on the safe side with the T400 Ultrabay, you could buy the new disk of 320 GB at 7200 RPM Lenovo announced in January.

  I didn't know that Lenovo made a great and fast.  An option, if it is near the level of Seagate.

• Possible to force overwriting of files when you use the method. render()?

  Hello world

  Hope all are well.  I looked at the documentation available in the Guide scripts of the effects after, but could not find any information on this.  Is it possible to force overwriting of files when you call a rendering method. render() in a script?  I know there is a constant that can be used to force overwriting of .aep project files when you use the method. close() on the app object.  For example, it's documentation:

  Action to run on close. A CloseOptions enumerated value, one of:

  CloseOptions.DO_NOT_SAVE_CHANGES : Close without saving the changes. CloseOptions.PROMPT_TO_SAVE_CHANGES : Whether to save changes before closing.
  CloseOptions.SAVE_CHANGES : automatically record on the end.

  Is there something like this for managing conflicts of files during the rendering process?

  Thank you
  Arie

  That's what I do. It seems to work:

  app.beginSuppressDialogs ();

  myProject.renderQueue.render ();

  app.endSuppressDialogs (false);

  Dan

• Is it possible to have an audio file to play throughout a digital publication on iPad?

  Good afternoon!

  I played with the idea of having an audio track to play throughout our digital publication on the iPad. I now work in a single article, but it stops once you move to a new article. Is it not possible to have it continue playing while the user navigates in the other articles?

  Thanks to everyone in the community, you have helped me through some difficult problems!

  http://forums.Adobe.com/message/4047712#4047712

• Possible to have two audio files in a single project?

  I use 3 Captivate and created a demonstration of a new product.  Us will have voice over explaining the features, but I also like to have music in the background.  Is this possible in captivate?

  Hello

  Indeed, it is possible. Common actually.

  Click on Audio > background and choose the background element to use. Assign narration to each slide across the slide.

  See you soon... Rick

  Click here for Adobe Certified Captivate and RoboHelp HTML training Click here for the SorcerStone Blog Click here for RoboHelp and Captivate eBooks

• [Database Toolbox] possibility to Load From xml file in Labview and then in the database

  Before you write in my database, I want to save it and reload if the user wants to cancel the new charge that can last several minutes.

  If he cancels the load I get back my previous database data.

  I managed to save my database in XML through the "DB tools SaveRecordSet To File" VI. This VI records directly contains my database table in the xml file. And finally, I only if the other VI to load file will do the same thing, means load the file and save it in my database but it gives just a recordset in labview.

  Question: is it possible just to load the xml file into the database directly through Labview?

  Why, finally, these screws do not have the same behavior?

  I don't know, but I just thought I would chime, that if you fail to do with LabvIEW, you might want to look by making your writing in a 'Transaction' database, if your DBM takes in charge (most except MS Access)

• Audio file keeps repeating using Winamp Media Player

  Don't sound

  As I've done millions of times before, and it froze on a moment of his, and he repeats to me, I played a song in Winamp.  As 1/20 of a second of the song, repeating endlessly.  I closed the program and the sound continues.

  Restart the PC should stop definitively the sound.

  You can also update your audio drivers to their latest version. Don't simply check Windows Update, but the site of the manufacturer of the sound card as well.

• newbie question on audio file that plays while the attached object is always visible

  I know how to link a sound file to an object, but is it possible to have the audio file set when the object is always visible (but not continuous, as an embedded sound file)? The object in question is the partitions and the sound file is the recording of the music, so you can see why I would want to see the old and hear the latter at the same time.

  Thanks for your help!

  . TIF isn't a standard web image file type.  TIF is mainly used in print media.   Open an image in your favourite graphic application (Photoshop or Fireworks).  Save for Web as optimized JPEG, GIF or PNG in your Local Site of DW folder.

  In addition, AIFF will be a problem because not all users have a Media Player installed on their machine that can handle this type of file.  On the web, you will reach a wider audience with a built-in MP3 player and MP3 audio files.  I highly recommend the Reader Pickle - play button.

  Nancy O.

• Use WMP to play audio files of older games triggers the Crash game

  I have a game more Microsoft called Age of Empires. The game has some cool sound effects, I went into the game directory and played some of the sounds with Windows Media Player. Now when I try to play the game, it crashes when these sounds are triggered.

  I learned that WMP adds a kind of coding for audio files when he plays, and that older games such as Age of Empires do not include this extra info so when the game tries to play the sounds, it crashes.

  I tried to uninstall the game completely and put it back and even delete audio files and their replacement, but he did not set. It is only the sounds that I played on WMP that cause the game to Crash, all the sounds I was not playing on WMP still work fine.

  Can you please tell me how to resolve this.

  Hi Halima,

  Thanks for your reply. I managed to solve the problem in a different way. I open each file with a program (I use Adobe Audition) for audio editing, you click Save under and saved all of the audio files as new mp3 files, crushing & replace the original files. I did it in bulk by opening all the audio files at the same time and choosing "save all".

  This seems to have removed the additional coding added to audio files in Windows Media Player and the game can play these audio files when triggered.

  That said, I do not understand why crushing & replacing the mp3 files fixed the issue so that the uninstall & reinstall the game does not - this method of relocation removed all files of game (including all audio files) and replace them with the original from disk files, but still they cannot be triggered by the game. Maybe the computer recognized them somehow as the same files that WMP had altered and automatically change them again. Very strange.

  Thank you

  David