Is it possible to play or pause a video by clicking on the video itself than with a set of the command bar and stop buttons?

Similar Questions

• program paused a moment when click on the windows title bar

  Today, I found a problem (maybe not a problem really):

  When I click on a VI running to move the window, it seems to have stopped a moment (for example, less than 1 second).

  Please try the simpler seal all looped VI.  You will see the value pauses for a moment when you click left and hold on the title bar of windows.

  I don't understand.

  I did an experiment to see if the data continued to be sampled pause display.  The results, I showed that the timestamp does not vary more than 11ms, which means that even if the display is not refreshed at the start, while holding down the left button of the mouse, the data was still populated in a table.

  I took a picture of ticks and checked the time difference between each iteration.  They were as follows (in ms):

  10, 10, 10, 10, 11, 10, etc...

  Mme.2 accounts for time to process the code in the loop.

• music file will not play in second hard drive double click Error "" the requested operation requires a rise ".

  Original title: music file won't play second hard drive by double click.

  Windows 7 ultimate/64

  I have a second hard drive on which I store my music files. If I open a player (Foobar is what I use now) and open the music file in the program, he plays very well, since the second HD.

  But if I double click on the music file (.mp3, usually), I get the message:

  "The requested operation requires a rise."

  I think it should open in the player by default when I do that.

  I remember well, it wasn't the case when I started to use this computer (it's fairly new), while something might have changed.
  I have the .mp3, .wav etc all default extensions for the Foobar player program.

  I went through elaborate measures to appropriate the entire disk and have granted full permissions for me as a user, following to the letter one of the many sites of the detailed instructions for this operation. But there is no help in sight.
  Original title: music file won't play second hard drive by double click

  So I can let my reader opens a music file leave a second drive, but I can't call him by double click or click right/context citing the player. When I do that, nothing happens, but I don't get the message "requires a rise."

  Every time I think that I am getting to know Windows 7, something like this happens. Avoid to receive life dull, of course.

  Thanks a lot for your suggestions. I've pretty much exhausted my own attempts.

  Jack

  Update: I think I've solved the problem. I have no idea that what caused it, but here's what fixed it:

  1 uninstalled Foobar with usual Control Panel uninstall
  2A through the startup disk everything and delete folders or files with the name "foobar" in them.
  3 did the same for the registry (creating a point of restoration first, of course)
  4 restarted
  5 download and install Foobar.

  Yes.

  Works very well.

  A big thank you to all who responded.

  Jack

• Is it possible to have TTS for several boxes to click on the same blade?

  Hi all

  Using v.7 and Win 7 here. Have a project where I use the voice of text-to-speech TTS of Paul. So far so good. I need to build an interactive slide with mulitple boxes click so that the learner can evaluate where they run into the status of projects. Is it possible to use the TTS for these mulitple boxes to click on the same blade? I see that you can import audio as a .wav or MP3 file but do not know how generate you TTS and save it separately, then it would be possible to import.

  Thanks for the help

  It's good to hear.

  Please mark this thread as answered.

• It is always possible to search with different search engines in the search bar and address bar?

  I used to use the address bar of Firefox to search for things on Google and the search bar to search for things on Wikipedia. The convenience, especially with the shortcuts Ctrl + L and Ctrl + K has been incredible and I don't understand why this feature would disappear so I guess that it simply was hidden without subject: config somewhere. How can I go on revenant Firefox which is previous feature?

  Note: I use the Nightly build of Firefox for 64-bit systems, if this issue must be addressed specifically to this branch of development please directly to where I can do.

  From 23 of Firefox, the address bar uses the search engine selected in your search bar.

  Assign keywords to your search engines, then the prefix of your search in the address bar query, for example

  g gingerbread recipes
  

  Google search for revenues of gingerbread.

  For more information, see the section "Key words" in the following article.

  • Use the search bar in Firefox

  If you can't stand absolutely avoid typing two extra characters, then you can try the following extension. It has not been considered by a Firefox Add-ons site editor, so use it at your own risk.

  • http://forums.mozillazine.org/viewtopic.php?p=12927143#p12927143

• Is it possible to display an image full screen; in other words, how to switch all the toolbars - including the status bar and the task bar?

  I found a few larger images (986 x 1024 and 2420 x 2514) I'd like to see on the entire screen. Is there a way to do this by enabling / disabling (then restore it later) of all toolbars - including the status bar and the task bar? Or is there an FF extension that will make perhaps even easier?

  Press F11 or select "full screen" in the menu. (If there is still floating toolbars around after that, do a right-click on the toolbar and remove the checkbox.)

• How to play several audio files at the same time and mute toggle some voices?

  Hi all

  Forgive me if this is mentioned elsewhere and kindly point me in the right direction.  I'm a kid with flash and action script so if you are in doubt, error on the side of more specific in your response, there is a lot of vocabulary I still don't know.

  The goal:

  I have 4 audio files which are Soprano, Alto, tenor and low voice of a musical example.  The result should allow the user to play all 4 voices at once and dumb voice specific to hear all the possible combinations of voices playing together or solo.  I imagined a check box at the beginning of each rated musical line that puts that voice muted when checked.

  It would be ideal to have the game, interrupt and stop reproduction choices where 'Stop' resets playback at the start and 'Pause' maintains the current place in time and takes over from there, once playback is started again.

  I am able to get the simple audio files to play from a single button, but I am struggling to find how to link multiple audio files to start at the same time by a single button.  I found this link: https://forums.adobe.com/thread/1069107?start=0 & tstart = 0

  where the last message mentions the use of tables, but being a complete beginner, I don't completely understand what they are doing.

  I know it's a big piece of questions at once, but if you could meet any part of it, or direct me to a tutorial/instructions, I would really appreciate it.

  Thank you for taking the time to help others

  use:

  kglad wrote:

  use:

  import flash.events.MouseEvent;

  import flash.media.SoundTransform;

  var soprano: Sound = new Soprano();

  Var high: Sound = new Alto();

  var tenor: Sound = new Tenor();

  var bass: Sound = new Bass();

  Ash var: Array = [soprano, alto, tenor, low];

  var offsetA:Array =]

  var st: SoundTransform = new SoundTransform();

  play_btn.addEventListener (MouseEvent.CLICK, playF);

  pause_btn.addEventListener (MouseEvent.CLICK, pauseF);

  stop_btn.addEventListener (MouseEvent.CLICK, stopF);

  playF function (e: MouseEvent): void {}

  for (var i: int = 0; i)< sounda.length;="" i++)="">

  This ["sc_" + i] = [i] Sunda () .play;

  }

  }

  function pauseF (e: MouseEvent): void {}

  for (var i: int = 0; i)< sounda.length;="" i++)="">

  offsetA [i] = this ["sc_" + i] .position;

  This ["sc_" + i]. Stop();

  }

  }

  function stopF (e: MouseEvent): void {}

  for (var i: int = 0; i)< sounda.length;="" i++)="">

  offsetA [i] = 0;

  This ["sc_" + i]. Stop();

  }

  }

  function unpauseF(e:MouseEvent):void {}

  for (var i: int = 0; i)< sounda.length;="" i++)="">

  This ["sc_" + i] = Sunda [i] .play (offsetA [i]);

  }

  }

  function muteF(i:int):void {}

  St.volume = 0;

  This ["sc_" + i] .soundTransform = m;

  }

  function unmuteF(i:int):void {}

  St.volume = 1;

  This ["sc_" + i] .soundTransform = m;

  }

• Is it possible to have several break the view have need to click on the button 'continue' to continue?

  Is it possible to have several breaks notice require to click on the button 'continue' to continue?

  Yes I know it s crazy frustrating. It took me three days to figure out what I had to do.

  You could get my file but I Don t know where to download.

  You set movie (click the play next to the movie icon and choose reading). No automatic reading of the symbol or triggers tell the movie to play (if you intend to work they way I wanted, which is impossible to tell). There are probably other ways, but none of the 2000 I tried before worked.

  When you´ve set the movie to play, mark the spot on the timeline of the movie where you want to pause, and then click pause in playback of movies. Define a trigger on the chronology of the symbol with playback > stop all > 'your symbol name' in the symbol timeline just to the right of the pause. Then set to play again to the right of the shutter release. Make a button with action play chronology of 0

  It sounds very complicated, but it s not. Find how it was REALLY hard for me anyway

• Dragging my updated firefox to update to the latest version and now the game I play which is a flash based game lag all the time in firefox, but not in Internet Explorer

  OK so I play a game called Emporea on my PC and it uses flash, I've never had a problem then I refreshed firefox as she suggested and it updated to the latest version, I've never had problems with it before on previous versions and now, with this, the lag is so bad that it makes the game almost unplayable. I tried to open it in other browsers such as IE, and it works very well in people. so, the question is somewhere with firefox, I've updated my flash drive and still no change in firefox

  One of the changes in Firefox 48-49 title is e10s, separating the process of browser interface process page content. The performance impact of this can vary a lot between the systems, and it would be useful to know if you have this feature enabled. To check this, either:

  • button '3-bar' menu > '? ' button > Troubleshooting Information
  • (menu bar) Help > troubleshooting information
  • type or paste Subject: support in the address bar and press enter

  In the first table on the page, find the line of Multiprocess Windows and see if the number on the left side of the fraction is greater than zero. If so, you are using e10s.

  If you use e10s:

  To determine if this feature is causing this problem, you can turn off as follows:

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the cars and make a pause so that the list is filtered

  (3) double-click the preference browser.tabs.remote.autostart.2 to switch the value from true to false

  Note: the exact name of this preference may vary, but it will start by Browser.Tabs.Remote.AutoStart

  On your next startup of Firefox, it must be run in the traditional way. Any difference?

• Is it still possible to put the URL bar on the front?

  Before the most recent change on my windows machines, I have had the firefox toolbar url and tabs button all on a single bar inside the "aero" windows style window decoration.

  Is it still possible to do? For the moment, I can't move the toolbar URL or menu options out of the toolbar and in the window decoration. If this is not possible can be done with an add-on? This change has doubled real estate display should read these.

  1. Classic restaurateur theme installation and restart Firefox when prompted.
  2. Open the modules (Ctrl + Shift + A Manager; Mac: Command + shift + A), then the Extensions category.
  3. Beside the classical restaurant theme, click on the Options button.
  4. On the main tab, make sure 'Mobile back-forward button' is checked. You can also check "Hide urlbars stop & reload buttons" and "combine stop & reload buttons. Close the options window when finished.
  5. Right-click on a zone empty of the tab bar and select Customize.
  6. Drag the front/rear, address bar, and any other key that you want in the toolbar and navigation on the tab bar.
  7. Drag all the unwanted items off the coast of the toolbar and navigation on the range of customization.
  8. Click the Customize the output at the bottom right button when finished.
  9. In modules, Extensions category, beside the classical Restorer theme Manager, click the Options button.
  10. On the main tab, under general UI, check "hide navigation bar. Close the options window when finished.

• Why active in my download Pause option is grayed out? Nothing happens when I click on the Pause button. ESP downloading youtube videos.

  I have videodownloadhelper installed module. Videos uploaded using it cannot be suspended. In addition, my firefox itself finally interrupted downloads between the two so I have to right click on the download file and select Pause then right-click again and select summary to go ahead with the download. But now the video download is paused and with right click it break option is grayed out is simply not available. How can I sort this strange problem?

  This is for all people with this annoying problem

  I followed the steps to the top and it worked, so ive disabled and uninstalled all the addons and themes, Ive restarted and began to install 1 by 1 thi is what ive installed:

  Add Blocker
  DownloadHelper
  Trust WOT
  DownThemAll
  Monkeyscript

  and they don't take my pause button and now it works fine, but when I installed:

  Youtubecenter

  problem, I love this addon anyway, so ive tried again in other order and the same thing happened to me but this time with script of monkey, so don't point to any specific addon, is just a weird problem, that of boring, but it can be solved in 20 minutes

  Cheers.

• How can I stop repeating the same song and he can play the next song during playback of music on my iPad?

  Please help me. When playing music on my iPad continues to repeat the same song, and it will not move forward to the next song on the album. It drives me crazy, and if I hear the Wiggles song even more once I'll scream!

  Check these screen grabs.

  

  

  If the icon repeat has a 1 in it (as in the photo), then he will repeat this song, simply click the icon to cycle through the options.

  HTH,

• When you use the search bar, it is possible to get results of the search in a new tab?

  In the old Google toolbar, it was possible to display the search results in a new tab, Google toolbar is compatible with Firefox 7, so I have to use the Firefox search bar. However, he always gets results the research in the current tab. Can this be changed?

  Yes. Open a new tab and type or paste Subject: config in the address bar, press enter and press ENTER again to override the warning. Then stick browser.search.openintab in the filter area that shows, and then double-click the browser.search.openintab to activate (it will switch to "BOLD").

  If you had rather an add-on simply do the above for you and add a menu option for it, try this:
  https://addons.Mozilla.org/firefox/addon/searchOnTab/

  You can also type a search in the search bar and press on alt + enter in instead of just enter to open your search in a new tab.

• QSI CDRW/DVD SBW-242 won't read DVD or BURN a CD (music CD will PLAY) [AFTER the HD FORMAT and re - install}

  Dell Inspiron5100 WinXP SP3.

  Due to malware, I had to FORMAT my HD and re-install Windows XP OEM disc.  I also reinstalled WIN DVD4 from the OEM disc that came with the laptop.

  Check SYSTEM/DeviceMGR/material indicates a problem with the drive, but: it won't READ a DVD or burn a CD (which she has done before)

  Can't update anything of QSI as they were absorbed by COREL years.  No support available for WINDVD4

  When you try to run WINDVD4 with a DVD in the drive, I get a Popup of WINDVD screen that says:

  CREATE OVERLAY FAILED-Please lower your color depth or screen resolution and try again.  Of course, it worked fine with the reg settings in the past, now Ive tried even lower TWO the RES SCREEN and color at least registered but still does not work

  It WILL play CDs of music (mp3s)

  Found the following material etc.

  Provider: Microsoft Corp.

  File version: 5.1.2600.5512 (xpsp 080413-2108

  Driver date: 01/07/2001

  Driver version: 5.1.2535

  Driver files

  C\windows\system32\DRIVERS\cdrom.sys

  "" "" \DRIVERS\imapi.sys

  «"\DRIVERS\redbook.sys «»

  «"«\system32\ c:\windows\system32\storprop.dll»»»

  I installed and ran but it won't play MICROSOFT 'FIXIT' DVDs just run from WINDVD4 and still does not.

  FIXIT now brings me HERE

  It seems that FORMAT/reinstall has missed something the will allow the CD PLAYER of .1BURN and 2. READ the DVD, but allows you to PLAY CDs

  From: * e-mail address is removed from the privacy *.
  To: * e-mail address is removed from the privacy *.
  Date: Tuesday, May 17, 2011 08:30:29-0700
  Subject: QSI SBW 242 CDRW/DVD not play DVD or BURN a CD (music CD will PLAY) [AFTER the HD FORMAT and re - install}

  Response

  Hello

  1. are you able to read any type of file .doc or .txt of DVD?

  After following all the steps (including the update of the MP9 for Media Player [MP] 11) below

  I can get the drive to DISPLAY all the data from the DVD (Master & Commander 'movie)

  on-screen MP11.  He plays (automatically) the intro (ONLY) from the DVD music (as when you put it in a DVD player, forward to press PLAY) MP11 shows all of the content and all the files on the DVD and SEEMS ready to play, but pressing on PLAY don't either not anything.

  2 , what exactly happens when you try to burn the CD? You get the error message?

  Not nothing... He's here

  3. How do you try to burn CDs?

  MediaPlayer, selection of a track list, made a list of titles, and then click BURN... nothing happens

  4 have you tried to play the DVD content in ? windows media player

  I had not before, but now I have.  Previously it was default to my SELECTION WIN DVD4 as the DVD player (I think I've EVER SEEN the WINDVD format/start page on the front screen - it wasn't the default front DVD player either but don't remember what program PLAYS the DVD, he ' comes of ").  Now, go back and see 1. above for MP11 more details.

  Try to update the drivers of CD-RW/DVD drive and check. Also update the graphics driver.

  I did the entire bottom.

  1. click on Start, click Control Panel, and then double-click System.

  2 click on the hardware tab, and then click Device Manager.
  If you are prompted for an administrator password or for confirmation, type the password, or click continue.

  3 right-click on the CD-RW/DVD drive, and then select set to update driver.

  He asks if I have an OEM driver and / disk... NO.. I run the program through...

  "Hardware update Wiz can not find a better match the software installed"

  4. right click on the graphics card and select Update driver. »

  There is no "graphics card" on the material.  This machine has integrated graphics using a part of the main memory (or other) to run the video section:

  I find:

  AUDIO, VIDEO and GAME controllers (announcement)

  Audio codecs

  Audio drivers

  Legacy video capture device

  Media control devices

  Audio Sigma

  Video codecs

  All this seem normal but above I see YELLOW TWO warnings under 'OTHER DEVICES '.

  ?!  Ethernet controller "drivers for this divide (code28) is not installed.

  ?! VIDEO CONTROLLER (VGA Compatible) I didn't HAVE NO IDEA if THIS if APPLIES OR NOT

  Device type - other devices

  MFG-unknown

  Location PCI bus, device 0, function 0.  "Drivers for this device are not installed, CODE28 to reinstall the driver."

  Has been through the usual (request for drive... Laughing out loud. Impossible to beat")

  See also:

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

  Did yesterday.  It installed/ran "MR. Microsoft Fixit' with the result:

  "Question: media in the CD-RW/DVD drive is not readable" CLICKED top DIFFICULTY... and after computer "worked" on this subject awhile, he says STATUS: fixed.  St ill did not.   MP9 introduced the format of the DVD player but don't seem to read anything other then showing a list:

  UNKNOWN

  Title 1

  Title2

  Title 3 etc., but could not do anything with this list.

  He appeared a box asking if I wanted to update my MP9... sure why not so I shut everything down and uninstalled 9 and installed Media player 11.

  Go BACK to # 1. now once again.  This is where I am.  MP11 shows all DVD data, the chart "the Album/DVD cover, all"titles"on the DVD, AND play the track audio 'intro' DVD but will not actually READ the DVD. "

  So far it's PROGRESS.  We are at a point where it SEEMS at least that we are ready to PLAY and MP can SEE all the info on the DVD.

  I see many people on other sites of the same question: Player does not work after FORMAT operating system and reinstall of WIN (and in my case: WinXP SP3 and WIN DVD4 of OEM disc)

  Thanks a lot for your help so far... I hope that we can get to the next step and get the reader of CD-RW/DVD on 'PLAY '.

• Audition not 'play' files when the space bar or play button

  Second time this has happened. The first time I found a suggestion online that I create a new file, fill a section of silence, play it... then my original file would work.

  A variant of this process worked, but I don't have to replicate the success this time.

  For the moment, I can open or create a file, hit the space bar and nothing moves. BUT the play button lights up green and the level indicator shows the level of the sample when the cursor is sitting.

  If I type the SPACEBAR on the stop, or hit back button, play button goes back to the gray.

  Another post suggested that this problem was caused by the hearing looking for a clock to drive. This seems plausible, but the post says to set the master clock out, and that is how it is currently defined.

  Thanks in advance for your suggestions!

  David

  DavidR_SF wrote:

  I just opened hearing again, open the same files and without modification

  I'm aware, it's back to work normally.

  This often indicates that some other software "stole" the audio device at any given time. It doesn't take much; just by clicking on a video Youtube can do. Problem, it is when it is done with her, he isn't getting handed back, so you have to go through the rigmarole of restore, as described above. It is a characteristic of the BONE rather than the hearing, but the only way to work around it involves the use of an external device and an ASIO driver. Essentially, this bypasses the operating system as audio is concerned, but it will cost you money...