Is it possible to prevent the update until I'm ready to Firefox?

Similar Questions

• PDM-files: is it possible to prevent the creation of files .tdms_index of LabVIEW and tiara?

  Hello

  is it possible to prevent the creation of .tdms_index files when opening/creating/editing of LabVIEW and tiara a .tdms file?

  I think that I have no advantage in the .tdms_index files, because our applications create many small .tdms-files (repeated measures). With .tdms_index files, we have unnecessary memory consumption and it takes longer for Windows Open the containing folder. Also it s confused when you search for a certain file.

  Best regards

  Daniel

  Hi Acer,

  I'm afraid there is a direct way to disable the creation of file .tdms_index now of LabVIEW and tiara. You can use the API Advacend TDMS in LabVIEW, which does not create an index file, or you can just do a simple programming and remove the .tdms_index file after closing the PDM file.

  This is a request for a long time, we will consider adding this feature for TDMS in future versions.

  Ye Yongqing

  OR R & D

• For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported

  For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported. Fix - it crashes too much with the line "invalid command line" when I try to run it.

  Hello

  1. this problem occurs only with this particular update?

  2 did you change on your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can reset the Windows Update components.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 2

  You can read the article.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 3

  Step 1:

  Place the computer in a clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. click Startand then click run.

  b. type msconfigand click OK.
  The System Configuration utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and servicesand then click OK.

  When you are prompted, click restart to restart the computer.

  
  Step 2:

  Download and install the update from the link.

  Update security for Windows XP (KB2719985)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30282

  See also:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

• RestorePoint feature' is disabled, preventing the update of drivers

  Original title: Edward

  'Restorepoint' is disabled, preventing the update of drivers

  Question: How and where I turn it back?

  Please visit: http://www.sevenforums.com/tutorials/81500-system-restore-enable-disable.html

• Trigger to prevent the update

  I want to create the trigger that will prevent illegal updates, but for illegal data, I want to insert into another table. In order to avoid the update, I have to make an exception, but it will insert is rollback. I am aware of the autonomous transactions (put I insert a procedure which is autonomous transactions) but it seems to me like dirty way to solve the problem. Y at - it another way to prevent the update that does not throw exception. I am also against the update on the same values. Thank you!

  FilipFry wrote:
  I checked the book, so now I am on the departure, how preventing the update in the after trigger without triggering an exception?

  The only way to prevent a updated row in a trigger would throw an exception.
  You may, of course, update leave unchanged data simply by setting the new value for each column in the old value, i.e.

  CREATE OR REPLACE TRIGGER some_trigger
    BEFORE UPDATE ON some_table
    FOR EACH ROW
  BEGIN
    IF( some_condition )
    THEN
      :new.column1 := :old.column1;
      :new.column2 := :old.column2;
      ...
      :new.columnN := :old.columnN;
    END IF;
  END;
  

  This is far from ideal from the point of view redo generation and from a perspective of maintainability, but it would prevent the change of location data.

  Another trigger approach would be to create a view on the table, create an INSTEAD OF trigger on the view and then publish your updates against the view. The INSTEAD OF trigger can determine to apply changes to the base table or not, whether to discard the changes or if you want to record changes in another table.

  Justin

• Is it possible to prevent the VMware Tools to try to reach the update server?

  I'm under 8.0 on a Win 7/64 host.  I usually install tools in a virtual machine that has no network connectivity.  When I start to install the tools, he's trying to connect to the update server to check if it is current.  Is it possible to have tools simply boot and install and not try to connect?  Thank you.

  I don't have a VMware Workstation 8 running at the moment, but IIRC the update settings can be configured in Edit-> preferences.

  André

• Not possible to do the updates

  I tried to do the update for the Nokia Music Player, but it has been discontinued. Once this system get stuck while it cannot install most anything. It happens only the error message which says that "it is not possible to update because the other installation is running. Problem, is that it is not possible to remove Nokia Player (using the control panel) because it gives the error message "it is not possible to remove the program because it is used by the other program. What should do?

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Possible to prevent the mobile site to show when the Office?

  I am building a website for one of my clients and it has a different design between the mobile and desktop versions. The mobile version uses different pages, and the desktop version is a design of a page. The problem I have right now is that I don't know if I can limit or prevent the Web site layout to change when I resize the width of the browser. I like to keep the desktop version of the Web site, even if the browser is resized. Before the sensitive update, it was possible to create three 'version' of the same site, and once the site is responsible for a mobile device, did not (unless you add a link) to load the desktop version and vice versa. Now, with how can the sensitive update, I avoid the desktop version to upgrade to the mobile version when the browser is resized? Any idea?

  Thank you!

  You need not use all or part of the breakpoints in this version of office. Just keep at least big enough set Property Page .

• How can I reinstall 24.6 and prevent the update with 31 Thunderbird

  Thunderbird 31 screw to the top of my email addresses. The background of the header becomes blue and when I enter names, most appear in red ink. It does not call the addresses in my address book using my letters abbreviated as done to 24.6 and replaces the names until I have to spell the full name.

  I continue to do system restore to return 24.6 & want to block the future Thunderbird updates so that I can keep 24.6. If this is not the case, how can I fix this ugly replacement.

  Get out your computer offline before installing TB > open TB > open the Options window > go to Advanced settings > Update tab > then you can change the way TB updates.

  NOTE: these steps are for TB 31 +, TB24 + may be a little different.

• Is it possible to prevent the right click context menu of the combination of Stop/Reload?

  Is it possible (subject: config tweak or something) to prevent the context menu of the combination of Stop/Reload?

  Screenshot of what I mean: http://picsend.net/images/873089StupidReloadSto.png

  Try to add this code in the file userChrome.css below default @namespace.

  • http://KB.mozillazine.org/userChrome.CSS

  Customization files (interface) userChrome.css and userContent.css (Web sites) are located in the chrome folder in the user profile folder.

  • http://KB.mozillazine.org/Editing_configuration

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  #context-stop,#context-reload[hidden="true"] { display: -moz-box!important; }

• Error 0 x 80244019 prevents the update XP Pro after re - install

  I ran XP Pro SP3 and Security Essentials successfully for at least 18 months, until that forced software corruption a reinstallation is complete. A new installation of XP Pro SP2 from CD can now be updated from the Microsoft Update site due to error 0 x 80244019. I have kept out of the reactivation of the OS until some error was erased. Help please!

  You need to reinstall XP SP3 for windows update to work.

  Windows XP SP3

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  I hope this helps.

• Why can I access Indesign is no longer after the update until 2015?

  I am currently charged monthly for a single application, Indesign, and today I've updated to version 2015 and now can't access the program. My account shows no more than my subscription and asks me to sign up again. I was just billed August 21, 2015 and using the program yesterday. After the updated 2015 I seem to have lost my access and membership. I don't wan to register again and be doubly charged monthly.

  I checked my account information. Sent to adobe a note on Facebook after going round in circles trying to get help from cat, who does not see to exist today (tried it on several browsers)

  I'm on an iMAC with Yosemite.

  Hello

  You can refer to the instructions in the links below:

  Connect and disconnect activate Cloud Creative applications

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Activation and deactivation of troubleshooting

  Creating cloud connection errors

  Let us know if that helps.

  Kind regards

  Bani

• Code received 57 a, preventing the update of Microsoft Outlook 2007

  I use a HP m9600t with Windows Vista Ultimate 64-bit desktop PC and using 8 GB of RAM on an Intel i7 920 processor.  When recently trying to do a Windows Update and Microsoft Outlook 2007 installed, the installation process has ended and reported a 57 a Code.  What should I do to fix this?

  Hi TLK Franklin,.
   
  Here are the steps to solve the problem:
   
  The file to be downloaded and installed is called SubInACL.exe and can be downloaded from this web site
   
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=E8BA3E56-D8FE-4A91-93CF-ED6985E3927B&displaylang=en
   
  If you attempted to install the Office Update 'today', when the research is completed, look for a log dated with today's date. Open and he will tell you in the first line the registry key was the cause of the problem.
   
  When you create your "batch" file, you can include the registry (as shown) or you can just correct the set of registry keys as described in the file msi*.log. personally, I would "fix" all of the registry.
   
  To create the file command, open the Notepad, then copy and paste the text between the lines broken in it. When pasted, remove blank lines.
  You will then need to "save under" resetreg.bat or something similar. The ILO is important is that it is saved with the extension "beats".
   
   
  CD /d "%ProgramFiles%\Windows Resource Kits\Tools"
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f/Grant = system = f
  Subinacl /subdirectories %windir%|*.*/Grant = administrators = f/Grant = system = f
  secedit/configure /cfg %windir%\inf\defltbase.inf/db defltbase.sdb / verbose
  pause
   
  OK, you have installed "subinacl.exe", you have created your batch file and are ready to go.

  Locate your file of commands newly created, right-click on it and select "Run as Administrator". A CMD window appears automatically and the process will start. When you are finished, the CMD window closes automatically.

  You can now restart your computer and then go to Windows Update and install the updates.

  I hope this helps.

  Concerning
  Rehman - Microsoft Support

• How to prevent the updates for Office Standard 2007

  I'm running on windows xp. I use office 2007 standard. After a computer breakdown recent when I reinstalled office 2007 standard I am able to update 2003 documents. However, after sending updates by microsoft I can't open word 2003 documents. It says I need a converter. When I go to the microsoft site and download as advised that it downloads but still do not allow me to open the 2003 docs. I just want to be able to disable updates for office 2007 standard. that will solve my problem. can someone tell me how to proceed?

  Thank you

  Hi Mary,

  I suggest you to check the number of KB updates to isolate the problem.

  To see the updates are installed on the computer, follow these steps:

  a. click Start, click all programsand then click Windows Update or Microsoft Update.

  b. click view update history. A window opens that displays all the updates that are installed and those who have not installed properly on the computer.

  You can perform the System Restore before you install the Windows updates and check.

  Important: System Restore will return all your files non-system as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  You can Configure Windows to install only specific updates.  Check out the link for more information.

  http://support.Microsoft.com/kb/901037

  For any question related to Office documents, I suggest you please post your query in Office and Outlook Forums for assistance.

  http://answers.Microsoft.com/en-us/Office/forums/Outlook

  Please post back with the State of the question, so that we can help you further.

• Prevent the update of the Actionscript

  Hello

  I have a very old. FLA file that I need to change. It was created using Actionscript 1, and when I open it in Adobe animate, requires the update script 3. This causes my. Slideshow of FLA to break. Any help to avoid this problem is welcome.

  Thank you in advance.

  In the Cloud creative menu, go to the applications tab. And then under additional Apps find select view previous Versions. Now you should see Flash Pro listed and CS6 will be one of the versions that you can download.

  Animate took CC Pro Flash, and there is usually no reason to have both of those installed. CS6 can do some things that were excluded from the CC version, so it is useful to keep around.