Is it possible to read the voltage/current SMU after the closure of the original session?

What is the method, or is it still possible reading the voltage and current of an SMU SMU-4138 measurements after the original configuration session has been closed?  I have a (relatively) long Teststand sequence that sets up the EMS to provide power to the ESA, then conducts tests and along the way I have to take the readings of SMU.  I was always under the impression, it is advisable to open and close the EMS quickly set up, but the 3-State programming model does not allow a way to jump into the running state of Init with channels VI, except through committed and engaged States and thus any stop in the process. The power measurement VI only works if you are in the Running State. Seems like a no-brainer, so what Miss me?

bholsinger wrote:

I was always under the impression, that it is recommended to open and close the EMS quickly set up

It's BAD advice.  You open at the beginning of your program, you do whatever it takes with it inside your test (configure, read, etc.) program and you don't log off not until you stop your program.

Tags: NI Hardware

Similar Questions

  • Log in failure: the user profile Service failed to connect. It is not possible to read the profile of the user.

    Hello
    Trying to create a standard account on a new Windows 7 computer but can not connect. The message with my Swedish translation is: user profile Service failed to connect. It is not possible to read the profile of the user.
    Can someone advice me?

    Hi Lagun,
     
    Step 1:
     
    I suggest you to follow this link below and check if this solves the problem.
     
    Now search for the question.
     
    Follow the link provided below to fix the damaged user profile.
    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
     
    See also:
     
    Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
    http://support.Microsoft.com/kb/947215
     
    Important: the above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
     
    How to back up and restore the registry in Windows
    http://support.Microsoft.com/kb/322756/
     
    Step 2:
     
    If you need assistance in Swedish, below the URL provided will help you receive support appropriate for your location information. Open the link and select your region from the drop-down list, and then click the arrow to continue.
     
    http://support.microsoft.com/common/international.aspx.
    Thank you, and in what concerns:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Is it possible to read the contents of the XML file rather than the properties for the location of FLEX

    Is it possible to read the contents of the XML file rather than the properties for the location of FLEX

    Strictly speaking, this is not really true. When running, the ResourceManager of IResourceBundles for localization, not deal with XML files or properties files. As long as you implement IResourceBundle, you can back it up with XML, properties, JSON, AMF files - what you want. The problem is that mxmlc will not build modules of resources for you what it is, with the exception of properties files, and cannot compile just resource bundles in a .swf using anything other than properties files. If you build your own interface to spit IResourceBundles, this could work, but it is probably more trouble that it's worth.

    (Assuming that you establish the link in the application) the best solution is to write a script to pre-process the XML in properties files.

  • restore the original titles to photo records; I accidentally changed the titles of my photo folders. Is it possible to restore the original titles?

    I accidentally changed the titles of my photo folders. Is it possible to restore the original titles?

    I accidentally changed the titles of my photo folders. Is it possible to restore the original titles?

    ===============================
    Right click / Rename?

    The following article is maybe worth a visit:

    How to rename a folder in Windows 7
    http://www.yoingco.com/how_to_rename_a_folder_windows_7.htm

  • DVD rom will not read the original (only) dvd.

    There is a message that says that it can not switch on analog copyright protection and a new driver must be installed. I don't know how to do in this regard. He used to play anything, and this problem only occurred after someone tried to install software for the 3D map. The operating system is Windows 7 Service pack 1. Kindly help.

    There is a message that says that it can not switch on analog copyright protection and a new driver must be installed. I don't know how to do in this regard. He used to play anything, and this problem only occurred after someone tried to install software for the 3D map. The operating system is Windows 7 Service pack 1. Kindly help.

    ====================================================
    If it is a recent issue, it may be worth trying to do
    a system restore to an hour before the beginning of the question.

    Windows 7 system restore: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

    More info...

    The free VLC Media Player may be worth a try...
    It will play anything.

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    VLC Media Player (32-bit Version)
    http://www.filehippo.com/download_vlc_32/
    (works on XP, Vista, 7, 8)
    (the name of the file to download is: vlc - 2.0.7 - win32.exe)

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    VLC Media Player (64-bit Version)
    http://www.filehippo.com/download_vlc_64/
    (works on XP, Vista, 7, 8)
    (the name of the file to download is: vlc - 2.0.7 - win64.exe)

    And the following links may be worth a visit:

    (2004673) Windows Media Player cannot
    read the DVD because it is not possible to
    turn on analog copy on the output protection
    view
    http://support.Microsoft.com/kb/2004673

    Windows Media Player cannot play the DVD because it is not
    possible to put on the protection against analog copying on the output screen
    http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=12.0.7100.0&ID=C00D1167&ContextId=61&OriginalID=C00D1167

  • Is it possible to change the original invoice number?

    I would change the original invoice number. We are migrating Miva Merchant, and our old store has a little more 45 000 orders. We would like to start a little more than if possible. I see it currently starts at 1000, anyone know of a way to change this.

    Hey Ryan,

    Unfortunately, there is no way to change the default invoice number - it starts at 1000

    Sorry,
    Florin

  • Home page search is not working / not Possible to restore the previous Session

    After the last update (version 29), the home page of default Firefox search bar has been completely non-functional. If I hit enter or press search, nothing happens. Another (possibly related) problem is that the button 'Restore previous Session' is never present. I can also restore the previous session by clicking on the option of history (it is always grayed out).

    When you look to the top How to start safe mode, I discovered how to reset Firefox to its default value of the plant. I did it and Voila! Problem solved.

  • Satellite L 40 Vista Premium - cannot read the original system restore disk

    My satellite L40 was bought a year ago, and so far I never needed the system restore CD. But now I have a missing system file so I will try to re - install. But my computer will not read the CD, if I insert it before starting my computer or windows Vista.
    Is there a way I can download the CD to restore the system on the Internet?

    Hello

    No you can't download because that would hurt microsoft license stuff. I recommend you ask a partner in your country for replacement, if your machine is still under warranty.

    Please go here and find the service provider nearest to them for help.

    Welcome them

  • I opened a picture with preview and all pixels become white. Is it possible to recover the original image?

    I just opened the photo and every pixel in it became white. There is no way to return to a previous version of the image, as if she had initially being that color. The size of the image remains the same, but each pixel is white.

    This is the second time that's happened, but the previous one, I was able to recover the deleted original file on my SD card, which is not an option at this time.

    I would like to know if there is an app or option on Preview that allows me to recover the original image.

    White preview screen glitch

    back-

  • Cannot read the original product key on the sticker.

    I would like to reinstall Vista from scratch, but it was done once already with a product key different than the original one. I would use the original this time, but the sticker is worn off the coast and unreadable. Are there any other unique identifiers on the laptop I could either give the Microsoft or the manufacturer to get the original product key? Thus, the old records of packaging and recovery are over for a long time. Any ideas are appreciated.

    I would like to reinstall Vista from scratch, but it was done once already with a product key different than the original one. I would use the original this time, but the sticker is worn off the coast and unreadable. Are there any other unique identifiers on the laptop I could either give the Microsoft or the manufacturer to get the original product key? Thus, the old records of packaging and recovery are over for a long time. Any ideas are appreciated.

    Hey ErdeKaiserSigma

    There is no record to microsoft who has what product keys

    and software key finder will not help that you have installed this version with a different product key

     
    Contact the computer manufacturer and ask them to send a set of recovery disks the original for your machine
    the recovery disks generally do not require the entry of a product key
    ask them about it

    Walter, the time zone traveller

  • Is it possible to read the TCPIP data so that it does not hang when there is no current database?

    Hello

    I have a loop in my code that uses a TCP read function. My problem is that the loop hangs if no data is available. What I would do is to check if the data is available, then make the move also read on to the rest of the code if no data is available, and then try again on the next pole.

    Thank you

    Ryan

    I guess as you exit the terminal timeout unwired. A number of wire it in milliseconds. If it expires you will get an error 56. Check the error code and if it is 56 you received no data; If there is no error, you read data.

  • Satellite A200-1 to 9 - not possible to read the 2 GB SD card

    Hi all

    I have a new laptop Satellite A200 from 1 to 9 on Vista premium, with a multicard reader. I am using a 2 GB SD card, which, according to the user's guide, must be supported.

    However, when I put in, it is not upward on explore, even if the computer makes a noise when I insert or remove the card. I tried the drive with a 256 MB card, and it works fine. I know that the card works, as I've used it with an external card reader instead. The 2 GB is a good one too.

    I was wondering if anyone had any ideas about this, because I would rather not use an external drive.
    Thanks in advance.

    Hello

    I had a similar problem with a 2 GB SD card.

    I put it and then nothing happens. About 5-10 minutes later, Vista recognized the SD card.
    So, in my opinion, it's a Vista problem.

    I installed XP on the PC and the SD card has worked without delay.

    It might be useful, if you install all the latest Microsoft Updates for Vista, to eliminate the problem of plug-and-play.

    Post edited by: Maurice

  • Is it possible to read the DPS on a computer?

    If some readers of my magazine have an iPad, can they still read on computer somehow? If no, what solution do you have I from the same InDesign document?

    If you enable the social sharing in your application, users can view folios and articles on a computer in an office web viewer. See this article for more information: http://helpx.adobe.com/digital-publishing-suite/help/using-social-sharing.html

    This option is available only for the multi-folio apps, not simple editing. If you are unable to activate social sharing, you need to look in a different way for example export your InDesign to HTML or interactive PDF files, but which can be a klutz "workflow" for a number of reasons.

  • Is it possible to restore the original function on the main taskbar buttons?

    I'm used to having my "Stop loading", "Home", "Reload" buttons to the left of the address bar... Is it possible to 4 FF to add these buttons to the bar?
    I get the concept of running after the "awesome bar" concept, but some of us prefer to have a more direct and immediate of those functions, control rather than having someone of another spoon on controls simplified for us.

    http://www.computertechtips.NET/64/make-Firefox-4-look-like-FF-3-6/

  • Atrix: Failed to upgrade (Please read the original post before answering)

    If you have snapped or changed your phone and you are on the Version of the system 4.1.26., 4.1.51 or 4.1.52 you can get an official version. Please see this post before responding:

    Post here if:

    You are currently on the Version(Menu > Settings > About Phone > System Version) 4.1.57 system and you are unable to upgrade to the next version.

    • Indicate what you saw when it failed.
    • Current state of what you see now
    • All that you have done on the phone to change the phone
    • What you have done since it failed
    • If you get the Android recovery screen Triangle with! in it and Android. Press on in the lower right corner and report any error messages see you.
    • Make sure that your forum profile has the most up to date 15-digit IMEI.

    Do not Post here if:

    • You received the notification
    • You have not yet received the notification
    • The update succeeded
    • You have comments after the upgrade is complete
    • You have any questions about the trial
    • All that is off-topic. It will be deleted.

    Thank you for your cooperation

    Mark

    Support Forums Manager


Maybe you are looking for