Is it possible to repair an installation of sp2 with an installation disc of vista (without service pack)

Similar Questions

• Someone knows how to fix a corrupted file mib.cab? 2350 error code? The result of the installation failed for Mindstorms NXT 2.0 on computer vista laptop, service pack 2.

  Tried to install the Lego NXT 2.0 software (programming robotics), a message "file 'mib.cab' required for this installation is corrupt and cannot be used.  A message gives the error code 2350.  Someone knows how to fix a corrupted file mib.cab?

  Try in the Forum of programs:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  See you soon.

  Mick Murphy - Microsoft partner

• A security update for the installation of MSXML 4.0 Service Pack 2 (KB954430) problem

  I have a machine with vista ultimate 64 bit with all the updates except:

  Update of security for MSXML 4.0 Service Pack 2 (KB954430)

  who is always on the list and has been "successfully" installed a large number of times, but each time my computer again it's always on the updated list of the things that I need. Any help?

  Hello

  see the sections «How to get help...» "and"known issues... ". "of this MSKB: http://support.microsoft.com/kb/954430.

  Hope this helps, Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop experience & Security - since 2003. ~ My Blog: http://blogs.dotnethell.it/vincent/

• Installation of Service Pack 2 causes continuous reboot.

  Vaio 2003 computers

  Windows XP

  Whenever I have install Service Pack 2, the computer restarts sporadically.  It has something to do with the Service Pack and the fact that an error occurs at startup:

  BIOS update incorrect data...

  My computer will work fine without Service Pack 2, but some programs require that now.  It may not by my RAM because the computer works fine without Service Pack 2.

  ERROR MESSAGE ON REBOOT:

  Windows has recovered from a serious error...

  C:\DOCUME~1\Adam\LOCALS~1\Temp\WER77f0.dir00\Mini051010-05.dmp

  is one of the mistakes.

  Help, please!

  WinXP SP2 should be installed no later than October 10 2006!

  See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the appropriate removal tool before installing updates, Service Packs Windows or IE upgrades and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I have windows xp after the installation of service pack 3 I can only start in safe mode

  I have windows XP after the installation of service pack 3 I can only start in safe mode?

  Hello

  ·         You get the error message?

  ·         What happens when you try to start in normal mode?

  Method 1

  Windows XP can in every start Safe Mode by default. Even if you select the option Start Windows normally, it always starts in Mode without failure. IOW, you can't get out of safe mode.

  This happens if the switch/SafeBoot is added to the Boot.ini file. / SafeBoot parameter forces a boot in safe mode by using the specified parameters. The available parameters are:

  (a) minimal (b) network (c) safeboot: minimal (alternateshell) For more information about the boot.ini switches, see visualization and correction of the settings of the boot on x 86 systems RESOLUTION (a) click Start, run and type MSCONFIG (b) click the Boot.ini tab (c) If you have a dual-boot system, select the entry that is appropriate under the [operating systems] (d) in section downstairs, Startup Options uncheck / hisFEBOOT (e) click OK (f) restart Windows The entry/SafeBoot are removed from the Boot.ini file.

  Method 2:

  If the above method is not the cause, it seems that Service Pack 3 is not installed correctly.

  Step 1: You try to run the system restore from safe mode that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  Step 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  Note: System requirements to install Windows XP SP3

  Reference: Learn how to install Windows XP Service Pack 3 (SP3)

  Hope the helps of information.

• Is it possible to upgrade Windows XP Home Edition Service Pack 1 has to Service Pack 3?

  I have the original disc of the product. It came as Windows XP SP1a. At in the past (a few years ago), I've upgraded to SP2. I started to receive a STOP error message. I tried to repair the installation of Windows XP Edition family. I can't say for sure right now, but it seems that SP2 just disappeared..., do not know immediately. I always face the STOP error.

  When I get things and rerun, can I put SP1a directly to SP3? I don't know the rules relating to the upgrade.

  Ask the same question in a different way..., can I've actually updated to SP3 Service Pack while jumping on SP2?

  Windows XP Home Edition has always been easy to use. I wouldn't lose it.

  The answer could be just a YES or a no thank you for your time.

  I don't know the rules relating to the upgrade.

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  The space of hard disk required for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947311

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  Some third-party programs can make a change in functionality after you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947309

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Windows XP Service Pack 3 - file to Image CD ISO-9660:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2FCDE6CE-B5FB-4488-8C50-FE22559D164E&displaylang=en

  Windows XP Service Pack 3 for developers network installation Package and the professionals (unique facilities for the PC can use the same file)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  Courtesy of MVP Harold Horne

  UTC/GMT is 05:08 on Sunday, November 27, 2011

• Is it possible to integrate the service pack 2 for Windows Vista?

  Hello

  I bought a full copy of Windows Vista Edition full in 2007 but I have not yet used.  Since the recent availability of Vista Service Pack 2, I wonder it would be possible to combine or integrate service pack 2 with my Windows Vista Ultimate DVD disc to a new blank DVD disc?  In other words, I would like to create a new Vista DVD installation disc that combines my copy of Vista Ultimate with the new service pack 2. Thus, I would avoid the process laborious and tedious installation service pack 1 and service pack 2 on windows updates.  Or do I need to have a copy of Windows Vista with service pack 1 preinstalled DVD disc before attempting to integrate service pack 2?  Please note that my installation of Windows Vista Edition full DVD disc has no service Pack1 preinstalled.

  I know that this was possible with Windows XP but some kind I've read reports recently that it is not possible with Vista because service pack 2 is not a cumulative update and the service pack 1 must be installed before you attempt to integrate service pack 2.  Is this true?

  I would be obliged if anyone out there can clarify this issue.

  Thank you

  Martin

  Slipstream Vista SP1

  http://www.Vistax64.com/tutorials/151606-Vista-SP1-slipstream-installation-DVD.html

  Slipstream Vista SP2
  http://www.Vistax64.com/tutorials/230249-sliptream-Vista-SP2.html Rob - support element, Cascade Bicycle Club P.O. Box 15165, Seattle, WA. 98115-0165 206-522-3222-24 hr hotline 206-522-BIKE http://www.cascade.org

• Vista Service Pack 1 update fails - computer will not start and cannot be repaired

  The computer which is an Acer desktop computer, running Windows Vista Premium.  In the last 6 months updated Vista tried Service Pack 1 update to install Vista about 8 times and failed every time a reason any.  Just before this latest incident, a facility was "cancelled" in the Middle for some reason any.  I restarted the computer and almost immediately was advised that there is an update, which turned out be SP-1.

  I started the update, and some time later I received a message that the update was successful, and that he had to be restarted the computer.  I clicked on the button restart and the Installation continues during the shutdown.

  When the computer tried to restart initialization failed and I ended up after several lines of information that looked as if it might be checking drivers and then information began to look as if she might be reading the register lines.  Each line has 2 numbers separated by a slash (/), who scored on a single line at the top of the screen, (white letters on black background) after a certain time the count to stop with the line of text of flickering on the same entry.

  It is the line that goes to the screen when the information keeps changing.

  !! 0xc01a001d!  37636/92292 (\Registry\Machine\components\winners\x86...)

  Since the failure of the Windows Vista SP1 update, when the system begins to start, after a short while, he starts playing what seems like lines in the registry, and after a few moments he always stops with the same accurate information just flicker.  At this point, it seems that this scenario will continue forever.  The hard drive is accessible, as if trying to read something, over and above.  The hard drive light flashes, instead of being on regularly, but only for a while.  After that, even the flickering stops.

  I have tried to start mode without failure, then after loading some files and after some time (5 or 10 seconds) the displayed files always end with the same file at the bottom of the list and what seems to be a status extend the message please know...  Shortly after the screen is empty, the fails to start and the computer is restarted.

  Usually what will happen is that the computer will begin to start up again, but because the previous boot failed, it asks if you want to go to startup repair, which, at first, seems to work fine, but after a little time it brings up a dialog box asking if you want to restore to the previous good Restore Point.  The display will then return to the same routine he had previously, and she runs to always if not interrupted.

  If you click the Cancel button, a message appears indicating that you cannot interrupt the current process, so the only way that you can try something else is to Shut Off the Power in now the switch down, permanently.

  [Note: the notes above have not all accurate messages, Word for Word, exceot for the Hex error line.]

  Hello
   
  Thanks for posting on Microsoft Answers.
   
  Try to put the folder windows update catalog distribution and software
  Try the following steps:
  1. Insert the Windows Vista installation disk into the disk drive and restart the computer.
  2. When you are prompted to restart from the disc, press any key.
  3. When you are prompted, configure the language to install, time and currency format and keyboard or options for method of entry that you want, and then click Next.
  4. on the page to install Windows, click on repair your computer.
  5. on the System Recovery Options, click the version of the Windows Vista operating system that you want to repair, and then click Next
  6. in the System Recovery Options page, click command prompt.
  7. type cd C:\windows\winsxs, and then press ENTER.
  8 type ren pending.xml pending.old, and then press ENTER.
  9. in the registry editor, find and delete the following registry subkey:
  HLKM\Offline Components\AdvancedInstallersNeedResolving
  HKLM\Offline Components\PendingXmlIdentifier
  HKLM\Offline Components\NextQueueEntryIndex
  10. at the command prompt, type exit to quit the registry editor. Press ENTER.
  11. click on restart
   
  More information:
  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista: http://support.microsoft.com/kb/949358
   
  Hope this helps
   
  Kind regards

  Niranjan
  Microsoft Answers Support Engineer

  
  Visit our Microsoft answers feedback Forum and let us know what you think.

• No disk Vista installation - bad/missing file on reboot prevents the go mode without installation disc required

  Is it possible to get an installation disk of Vista download image/content.  I have a valid code of MS for Vista, but there was no installation disc provided with the computer at the time of purchase (without recovery disc either).  An installation disc is required to restart the computer to restore startup files that have been corrupted or damaged in case of overheating of the CPU.

  If Windows Vista was preinstalled on your computer, contact your computer manufacturer and ask a Setup for your model disk. Boulder computer Maven
  Most Microsoft Valuable Professional

• Installation of Service Pack 3

  I had to make a full recovery from my computer.  When the automatic update were added was not Service Pack 3.  I read where it will not be added after the date of July.  When I go to Microsoft updates he says it's for network users.  I have a computer at home. I have to manually add the Service Pack 3 for my computer at home and where do I go to do this?

  Hi tillieannie,

  You can use the Windows XP sp3 network installation package to install on the computer at home as well.

  Use the direct link to download Windows XP sp3 below network installation package

  Windows XP Service Pack 3 network installation Package for IT professionals

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

   

  See the Microsoft articles below before you start to install Windows XP SP3

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717/

  Information about Windows XP Service Pack 3

  http://support.Microsoft.com/kb/936929

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Service Pack 3 problem after Installation

  I installed Service Pack 3 on my Windows XP Home Edition and once the computer restarted I had a black and white screen saying that there is a power failure or something else and I could either start my computer in safe mode, normal, or the last known configuration.  Well, the only way that I even get to the login screen is choosing safe mode. The other choices keep simply by restarting the computer and I to return to the black and white screen.  What can I do?

  See if remove the SP3 fixes the problem-

  How to remove Windows XP Service Pack 3 from your computer
  http://support.Microsoft.com/kb/950249

  FYI

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  The space of hard disk required for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947311

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  TaurArian [MVP] 2005-2010 - Update Services

• XP Service Pack 3 Installation freezes

  While trying to install XP Service Pack 3, installation blocks every attempt I made at the same place. Then installation seems to freeze, the Setup Wizard reads "Creating cabinets" and the installation window state update bed 'Install Windows XP Service Pack 3 (update 1 1)'

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

• error 0 x 80070002 during the installation of windows xp service pack 3

  .. After 20 minutes, he stops by installing the update and displays the error message, and then uninstalls and removes all files. How can I solve this problem

  .. After 20 minutes, he stops by installing the update and displays the error message, and then uninstalls and removes all files. How can I solve this problem

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  Probably better to download the full file and install rather than through Windows Update (after correcting your mistake above code).

  FYI

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  The space of hard disk required for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947311

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

• "The expected Version of the product is not found on the system" error message during the Installation of Service Pack 3

  During the installation of Microsoft Service Pack 3, I get the message "The expected Version of the product is not found on the system."

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Downloads of SP3: -.

  Windows XP Service Pack 3 - file to Image CD ISO-9660:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2FCDE6CE-B5FB-4488-8C50-FE22559D164E&displaylang=en

  Windows XP Service Pack 3 for developers network installation Package and the professionals (unique facilities for the PC can use the same file)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  How do you know if you are running a 32 bit / X 86 or 64-bit computer

  1. Click Start.

  2. Do right click my computer and then click Properties.

     • If you don't see "x 64 Edition" in the list, then you are running 32-bit Windows XP.

     • If "x 64 Edition" is listed under system, you are running the 64 bit version of Windows XP.

• While the installation of Service Pack 3 error message comes as "Bullxp is not a WIN 32 application.

  Original title: installation of Service Pack 3

  IAM using windows xp service pack 2 for Bull XP software. Now, I want service pack 3 to my Zune connection. I downloaded SP3 but that you can not install. Error message comes as Bullxp is not a WIN 32 application. So my question is. What is win32 application. ?  Will I get updated by the Download Center or else are up to so that I can go?

  Hello

  The error message "not a Win32 application invalid" is displayed on the Windows computers and can indicate a variety of problems. Win32 is part of the core of the Windows operating systems and programs installed on your computer must communicate with the kernel in order to work properly.

  Follow the steps in troubleshooting these KB articles and check if that helps:

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  You can also post your query to the Bullguard Forum and check:

  http://Forum.BullGuard.com/Forum/