Is it possible to run DiagOnCAN with the NI-CAN driver only (without car Diag command Set)

Hello world

Is it possible to run DiagOnCan without using Diag command set auto - only with the NI-CAN driver (hardware I use is low tolerant speed - USB8472 and NOR-XNET)?

G. Petko

no problem to do with your hardware and NI-CAN frame API.

However, you must implement the Diag and Services Transport layer on your own, which is quite a big job.

I recommend you spend the money for automotive diagnostic command set that supports

  • NI CAN (PXI, PCI, PCMCIA, USB)

  • NOR-XNET

  • cRIO/985 x target (Pharlap and VxWorks) #.

which means that if you plan to transfer your application in the future to different hardware target or the real-time target, that you don't need to change your app at all.

Tags: NI Products

Similar Questions

  • IBM Thinkpad message: 'this machine can run faster with the USB 2.0 hub.

    Original title: Thinkpad USB 2.0 Hub.

    Hello:

    I have an IBM Thinkpad T-21 which is under Ubuntu & Windows xp.  I primarily use Windows XP.  The pop-up that keeps occurring is "this machine can run faster with the USB 2.0 hub.  Can you tell me how to upgrade my USB 2.0 Hub?  Would like to know because I can't sync my Android phone with my computer until I do it. Thank you.

    Are you sure you copied this error message properly?  In other words, he says that the hub could perform better if connected to a USB 2.0 port?  As far as I can determine that the T21 is not come with a USB 2.0 port, even if you connect a USB 2.0 device (for example a hub), the unit will only race as fast as the port allows it.

    What is the brand and model of your terminal?

    It is possible that the message means the opposite (i.e., your computer has a USB 2.0 port, but the hub is only a USB 1.1 device).

    USB 2.0 was introduced in 2001, so if you bought your computer before 2001, it is likely that you use USB 1.1 or 1.0.

    Open the Device Manager (start > run > devmgmt.msc > OK)
    Expand the category of 'USB Bus controllers'.
    If you see the "Enhanced" work for one or more of the listed devices, you have a USB 2.0 port.  If you do not see "Enhanced", you have USB 1.1.

    If the problem is that the USB port on the computer is not 2.0, so your only solution is to buy a USB 2.0 PC Card adapter.  Example and example 2
    If the problem is that the hub is not 2.0, then you will need to buy a new hub.

  • I want to send an email manually with the fields email drives custom object? Is this possible?

    I want to send an email manually with the fields email drives custom object? Is this possible?

    Hey,.

    Yes, however, the object record Email custom fields only fill with default values. For the custom field object Record is filled, it must be sent via the event Actions or a generating program so that he knows in which case it is associated.

    Thank you...

  • On the outlook calendar, I could change the "reminder" what time it is, is it possible to do this with the W8 calendar?

    On the outlook calendar, I could change the "reminder" what time it is, is it possible to do this with the W8 calendar? Let's say, for example, I want a reminder of 40 minutes or 1 hour and 45 minutes. W8 calendar does not appear to have this as an option.

    Hello

    Here are some steps that you can follow:

    a. open the calendar app.

    b. right-click on the screen of the calendar app.

    c. Select the new option (with sign +) from the lower right corner.

    d. under How long option, select custom , and then select your choice.

    Note: Also check the option to display more choices.

    e. save the settings by clicking the Save option in the upper right.

    See also:

    Application of calendar for Windows: FAQ

    http://Windows.Microsoft.com/en-us/Windows-8/calendar-FAQ

    I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

  • Delay in an executable LabView 10 starting with the present mapped drives in Windows 7.

    I am running windows 7 on a network peer-to-peer without internet access with an executable version of LabView 10.  Executables mapped access folders on the network and works very well once it is up and running.  The problem is the time required to run the executable when the mapped drives are present.  It takes about 65 seconds to start and now, windows displays the message "not responding".  But it always starts.  If the mapped drives are disconnected, the executable file starts in 5 seconds.  The same executable running under windows with the same mapped drives THAT XP doesn't have this problem.  Any ideas?

    Hello Rgenaway,

    Probably, it is simply a matter of Windows than a problem of LabVIEW. The difference between the time it takes to start when the drives are present and absent could be due to both the application and the readers need to connect and start communicating.

  • My window 7 showing message "a problem with the NVIDIA Graphic driver", but I can't download the solution

    My Windows 7 PC at home keep crashing and I keep losting my screen when I played the game on the last 6 months.  After I restart my PC, it says that there was a screen.   I had since a few Update window update driver and try the NVIDIA drivers with no will.  There were a few times he were message indicating the "resolve a problem with the NVIDIA graphics driver" on the taskbar.  When I click on the message and try to download.  It gives me the message that "your computer was not able to download the solution at this time.  Make sure that your computer is connected to the internet, and then try to download again"that had happen all the time, and of course, I had access to the internet all the time!  I'm getting nowhere for solve this problem.  Can anyone help?  I want to know if there is something I need to know the video driver as usual outside the upgrade.

    PS I tried a lot of stuff, running the troubleshooter from the performance.  I had an i7 with plenty of RAM, running only a few program, hard disk error not... etc.  It seems related to the video driver. I update my window.

    Hello Lewie,

    Thanks for posting your query in Microsoft Community Forum.

    1. What is brand and model your computer?
    2. You did it any significant hardware or change software on the computer before this problem?

    I understand that you lose your screen when you play a game. This happens usually if the installed graphics driver has corrupted or unstable. Therefore, I suggest trying the following methods and check if the problem persists.

    Method 1: Run the tool material and devices

    Try running the next fixit and check whether the problem is resolved.

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Method 2: Update your graphics card

    1 open Device Manager by clicking the Start button, click Control Panel, click System and Security, and then, under System, click the Managerof peripheral . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    2. in the list of hardware categories, find the display adapters and select the device driver you want to update, and then double-click the device name.

    3. Click tab driver , click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    For more information, visit the below mentioned link:
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    If you are not able to update the device driver via windows update, you can visit your computer or graphics card manufacturer (NVIDIA) Web site and download & install the latest driver. Or contact the manufacturer of your system to do.

    For reference, you can also consult the following Web page. Click on continue to this site Web (not recommended) if you are prompted for any error of certification.

    A problem of NVIDIA graphic driver

    Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  • Tips for Lightroom 6 help indicates again that if "using a graphics card AMD/ATI under Windows 64-bit with the AMD Catalyst driver 15.7 and Lightroom CC/Lightroom 6 hangs or crashes during launch or when you edit an image in the develop module.»  This

    Oops... .the everything in the title... My apologies!

    Tips for Lightroom 6 help indicates again that if "using a graphics card AMD/ATI under Windows 64-bit with the AMD Catalyst driver 15.7 and Lightroom CC/Lightroom 6 hangs or crashes during launch or when you edit an image in the develop module.»  This problem may occur when you use AMD Radeon HD 5xxx card graphics series 8xxx running versions of pilot 14.501.1003, 14.502.1014 and 15.200.1062.1004. For the Solution of the page install the AMD Catalyst 15.8 Beta Driver for Windows (posted August 31, 2015).  However, there are now a 16.1 driver... would this work with Lightroom 6buttons Photpshop CC without problem or should I stay with 15.8 beta for Windows driver (Windows 8.1.

    Thank you very much

    Paul Winstone

    Hi Paul,.

    This article was created when users have faced problem with old drivers for AMD graphics card.

    Yes, you can upgrade to the last 16.1 pilots and who should work well however, you should have 1 GB VRAM or more to take advantage of the GPU processors.

    Kind regards

    Claes

  • I connect my macbook pro to monitor via HDMI, but there is no sound control can do with the macbook, can you help me

    I connect my macbook pro to monitor via HDMI, but there is no sound control can do with the macbook, can anyone help?

    You must use the volume control on the monitor. That's how Apple means yo do and does not provide any method using Mac

  • Recovery disks do not work with the new hard drive?

    Hello, everyone.

    I have a laptop HP (pavilion dv7-1245dx) and the hard drive is dead. I had never gotten to burn my recovery disks, so I ordered new ones from HP. When I installed the new hard drive and popped in the disk to reinstall the operating system, it gave me the error message:

    "This PC is not supported by the system recovery discs. You can continue to recover this system with these discs. »

    Error code: 0100-30 FC-3602-3603

    The original hard drive was a Hitachi, 320 GB SATA

    The new hard drive is a WD 500 GB SATA

    Any assistance anyone can give would be great. :]

    Thank you for your time,

    C

    EDIT: Trying to recover a Vista operating system

    For anyone who has the same problem, I found a solution. I cloned the original hard drive using the Clonezilla fallback option. After using Clonezilla to image on the new hard disk, the partition which held that most of the data of the laptop is not mountable, however the partition containing the restore partition was a perfect copy. I turned on the computer, hit escape to access the menu (for a list of options such as boot order, etc, which included an option for recovery), and then choose recovery option. While the recovery discs, I received from HP refused to work with the new hard drive, the Vista restored cloned recovery partition without flaw.

  • HP 1350 printer peripheral will not stay in offline mode. Problems with the Wi - Fi driver

    Hi I have a Dell desktop with printer HP 1500 computer.  After printing several documents, the printer has gone offline.  Troubleshooting indicates the problem with the Wi - Fi driver.  The printer is connected to the computer makes a Wi - Fi connection has to do with it?  I have add a portable Wi - Fi system recently.

    Hi, Mt48,

    Is the printer a 1350 aio or deskjet 1500?  You have listed two different models.

    Windows operating system?

    To resolve this problem, perform the following steps:
    1. Right-click on the my computer icon and choose manage, then click Design Manager.
      In the currency Manager there will be the USB root hubs (there may be several USB root hubs) perform the following steps for all root hubs:
    2. Right click on the USB root hub and go to properties, then the power management and uncheck 'Allow the computer to turn off this legacy to save energy' in the Design Manager.

    http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=UK&TaskID=110&prodSeriesId=439153&prodTypeId=18972&ObjectID=c01475742

    Monofunctional and multifunction printers - HP printer is offline message appears on the computer and the HP product does not print

    http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02221706&lang=en&cc=us&TaskID=130&ContentType=SupportFAQ&prodSeriesId=306884&prodTypeId=18972

    Look for your version of Windows and select printing HP and the Scan Doctor - this is a diagnostic utility

    http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=306889&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=306884

  • How to share a folder in windows XP with password so that people on the network can see only its folder

    Original title: Network share

    How to share a folder in windows XP with password so that people on the network can see only its folder

    Hello

    See the following article:

    How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP:

    http://support.Microsoft.com/kb/307874

  • Dell Latitude E5500-problems with the IDT audio driver

    Hi all!

    I use Windows Vista 32bits on E5500 and everything works fine with the big exception of the audio driver. I used the latest version for this laptop which is A15, no other versions are available on the downloads page. The pilot is very unstable and crashes all the time. Pressing the sound keys does not change the audio levels instantly as expected. There is a noticeable delay in the volume control after I pressed the button. A few 4-5 or more seconds after I press Volume upwards or downwards until the press is registered. A very weird situation and nothing helped so I deleted the audio driver of Dell. I use the default Windows driver now and so far everything is ok.

    Everyone has experienced a weird behavior like this on the same computer laptop? Do you know where I can find an old audio driver for E5500 so I can test again?

    As the system software Dell-is important on the audio system or not so. I installed it after a recommendation in the audio FAQ here on the forum. Thanks for all the tips!

    Pandorum
    old audio driver for E5500

    Very good selection here

    http://downloads.Dell.com/published/pages/latitude-E5500.html

    All most recent drivers dated IDT must be removed from the hard disk or at least the drivers folder before installing an old date one.

    Pandorum
    As the system software Dell-is important on the audio system or not so.

    With the Intel chipset driver, was important for XP, not important for 7, but not sure about Vista.

  • I click on "Fix a problem with the NVIDIA graphics driver" and he says: "this solution could not be downloaded.

    I click on solve PC problems (the flag) and it says address a problem with the NVIDIA graphics driver. I click it and it says:

    This solution could not be downloaded

    --------------------------------------------------------------------------------

    The most likely causes:
    Your computer was unable to download the solution at this time. Make sure that your computer is connected to the Internet and then try to download the solution later.

    --------------------------------------------------------------------------------
     
    I am connected to internet, and the works, works etc of web browsing of windows update. Why it is not downloading the solution?

    Download and install the latest driver for your graphics card nVidia.

  • protection tunnels works with the mode of transport only?

    Anyone know why protection tunnel works with the mode of transport only? If I change to tunnel mode, it stops working immediately.

    Thank you

    That's because Tunnel mode creates a new IP header that is modified when is coordinated, when the remote peer receives this new header which is concerned the Security numbers do not match what it generated. Using transport mode retains the original header and only encapsulates the payload.

  • Hard drive has been corrupted and replaced it with the new hard drive but couldn't get the windows genuine back 8

    Original title: recovery of original windows 8

    When I bought the new device, it was loaded with windows 8 but a few days before my hard drive has been corrupted and replaced it with the new hard drive but could not get the real Windows back 8.

    Please help me to get my windows genuine 8 back so I could get additional updates downloaded.

    Hello Vishal,

    Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

    If you purchased a computer with installed OEM Windows 8 on it, there could be a sticker on the Tower, or in the back (in the case of a laptop) with the product key to this topic. If there is no sticker, he can be preinstalled on your system BIOS.

    See the suggestions posted by Andre Da Costa replied on March 7, 2013.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/how-to-get-Windows-8-product-key-in-preloaded/ea0e53ae-3506-4ba2-a092-f266ece7072f?auth=1

    In addition to this, see:

    Product key lost or misplaced (certificate of authenticity) for Windows

    If the problem persists, you can contact the manufacturer of the hardware for the same thing and check.

    Hope this information was useful.

Maybe you are looking for