Is it possible to run flash applications in different containers-plugin?

Similar Questions

• Is it possible to run an application Windows on my MAC?

  I have a new sewing machine, which connects via wifi to my computer for downloads, etc.  However, the software is only for a PC.  Is there a way I can run on my iMac?

  You must install Windows on your Mac. Either as a Boot Camp partition separate or in a virtual machine, such as Parallels or VMware. With the first, you start directly in Windows. For all purposes, your computer is a PC. With the latter, you use Windows in OS X, so the two BONES are available at the same time.

  There is also a CrossOver, which can run Windows applications to OS x without having Windows installed at all. But it of all or nothing if an application will run, uncertain, or not at all.

• Is it possible to make an application in different languages?

  Hey,.

  We have an app that should be in all three languages. The language on the device settings must decide which version to download from the App Store or Google play. Is - it somehow possible?

  Best regards

  I'm not aware of a way to make the downloads per the language of a store. I think that the two stores will allow you to define which area an app is available in, and what language is supported, but I don't think that you can restrict the availability based on the language of the unit.

  Neil

• cRIO run multiple Applications?

  Is it possible to run multiple applications on a target cRIO?  Would they all need to be part of the same project in LabVIEW?  Can I set more than one as a starting VI or need to create a VI that would start up individule applications?  They are the basics of Ethernet and not to use or share any what I/O.  I looked around, but didn't see much information on this subject.  Thank you!

  Good afternoon Matt,.

  It is possible to run several applications on a target of cRIO as long as they are in the same project and do not exceed the capacity of the target memory. You can only mark a VI the sixth start-up, but, as you said, you have this VI call your other applications. You can find useful the following documentation:

  Programmatically launch an executable file or VI on a real-time controller

  http://digital.NI.com/public.nsf/allkb/A7DBA869C000B5AE862570B2007C4170

  Using VI server to run LabVIEW VI real time stored on a hard drive of the RT series

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4364

  Getting started with the Module time real LabVIEW

  http://digital.NI.com/manuals.nsf/WebSearch/12F0FF18FB1BB533862575AD00696100

  I hope this helps!

  -Ryan S.

• Run the application in the background and receive updates of geolocation

  Is it possible to run an application in the background (for example all doing other things such as the use of browser, mail, etc) and always receive updates HTML5 geolocation?

  If you make your application in the "background" and do not close, the watchPosition should go on the provision of data within your App App in the background means you open the app and ample bottom to somehow minimize, for example. to open another app or something like that. As long as he remains upwards in the list of open applications it should "look at the position.

• How to run the application in the home screen

  Hello

  I would like to know if it is possible to run your application in the home screen, so you could see for example the standard home access area quick screen in the upper part (where time, WI - FI and other things are shown) and my application occupies the rest of the screen.

  Thank you

  Laughing out loud
  I tried, but there was no workable solution.

• Is it possible to run splitview with two-mode applications landscape on iPad pro in portrait mode?

  Hello

  Is it possible to run splitview so that both applications are in landscape mode, while now the iPad in portrait mode?

  So basically, instead of apps side by side, it would be top apps down.

  I use goodreader to watch a video while surfing the web on safari. But when he was knocked down by side there are a lot of realestate lost on the side of the video.

  see you soon

  Unfortunately not. If I was a Pro too much it would be my favorite. Try using the comments link to suggest to Apple.

  http://www.Apple.com/feedback/

• There is a possibility to run Labview projects or to set them off from a batch file or if the exist and the ability to control labview or run it from an external application?

  Hi, I m a bit new in LabVIEW and I'd like to ask a few questions...

  -There is a possibility to run Labview projects or to set them off from a batch file or if the exist and the ability to control labview or run it from an external application?

  -One API PI or raspberry beaglebone exists for LabVIEW?

  -Power supply Wich can recommend you control with LabVIEW? (some chip solution witn 0 - 30v / 0 - 3A DC)

  Thank you very much for your advice!

  Best regards

  Elena

  Elena,

  I know raspberry, so no comment on that.

  For the rest:

  -Do you want to create tools for developers? If so, we must look in the API of project VI and VI server. If this isn't the case, please compile your application LV as executable and call this one using a batch file.

  -LV prefer specific supplies. LV is a programming language. There are several power supply providers (including OR) which provide directly the LV API for their power supplies. So, essentially, the approach is:

  1. choose food that serves your needs.

  2. check if the power supply has a standard interface for programming (such as Ethernet, GPIB, or if the power supply is PXI, is already providing a programming interface!)

  3. check if the LV API (so-called "instrument driver") is available for the device. In the case of a PXI system, get you a device driver (for example NI DCPower).

  4. check if the LV samples are available (for example in the Finder for example LV once you have installed the driver).

  Norbert

• Is it possible to connect my Application ' Stop' button with the "Run" button of LabVIEW?

  Problem - one of my clients recently tested my new LabVIEW application and asked how the arrested LabVIEW application can be restarted without clicking on the "Run" (right arrow) button.

  Is possible solution - possible to connect my Application ' Stop' button with the "Run" button of LabVIEW?

  Thank you!

  Barry

  The big problem is in your Acquistion to stop audio event. You run the LabVIEW stop sign which is the equivalent of hitting the Cancel button in the toolbar.  (See contextual help on that).  You can stop the acquisition, but you don't want to stop your LabVIEW program.  You need this case in the event your computer to transition state in a sleep mode when you do not make any purchase.  Then hit the purchase button to start again transitions the machine state in the acquisition.

  In your case of program output, you want really to leave LabVIEW it.  You want to run and stop commands like closing the com port and one of these activeX references.  Then allow it to stop the while loop.  Turn the LabVIEW out outside the loop so that once everything is cleaned, your application may close.  You probably want to wrap this command in a case structure so that if you are in the execution environment, it leaves your application.  But if you are in the development environment, you don't want to cause your LabVIEW environment stop.  Another thing is that right now, you actually have a race condition in the Exit event.  The com port will close first or LabVIEW will come out.  There is no defined order of execution.

  Alternatively, you can have an event to close panel? in this way, you haven't accidentally short circuit all your program by pressing the X key.  You want to capture this event, discard it.  And if you want to not actually closed, did trigger the Exit Program button so that you can gracefully shutdown.

• It is possible to run Easy Transfer after upgrading to Win7 AND AFTER installs all applications?

  Update of XP (32 bit) for Win 7 (64-bit).  Transfer easy on the old system and also saved.  Performed a clean install of Windows 7 without any problem.

  The instructions say to upgrade Win7, then run to transfer, and THEN install the apps.  Well, I have not read the instructions and correctly installed Win7, installed applications and now need to execute the transfer.

  That is problem?  It is even possible to run easy transfer now?  Should I reinstall all applications again?

  (I'm not worried for the part 32-bit to 64-bit, I just included this info with full disclosure).

  Thank you
  brand

  Thanks for the post brand.  the transfer is intended to capture data and the status of the user.  He didn't have much to do with the migration of the applications with the exception of the view that it is able to create a report that identifies what applications may need to be installed on the new machine.  in order to integrate the data of the machine inherited from the windows machine 7, we should have run the version of Windows 7 easy transfer on the Windows XP machine before recharging.

  If we capture the data of the XP machine before reloading, then we can re-read the data at any time - even after that applications are installed

  Here's hoping that you captured user data and the State with easy transfer before you wipe and reload.

  / rich http://cbfive.com

• Is it possible to run a survey in the application? For example: how is the sound environment in your workplace? Followed by clickable areas.

  Im just starting to build my first magazine digital/app. My boss asked me if its possible to run a survey in the application. He wants to ask a question to the reader, and he wants the reader to answer using clickable areas or free text. I have no idea, I said, but will find. Does anyone here know?

  Thnx

  Jacob

  Way more simple, on the top of my head would be to use FormsCentral, then

  link to it as an overlay of web content.

  https://www.Acrobat.com/en_US/products/FormsCentral.html

• Is it possible to run Windows 7 on Tecra S1 PT831E

  Hello

  is it possible to run Windows 7 on my Tecra S1 PT831E 126PQ?

  I've updated the BIOS (last?) version 2.50 (it should be suitable also for Windows 7). With this done BIOS is fully compliant with ACPI?

  Checking with Windows 7 Upgrade Advisor should not be a problem, in fact.

  Thanks for any help.

  Well cordially

  ThomasMuentzer

  Hello

  Of course, you can install Windows 7 on your good old classic.
  But the fact is that there is no official driver Win 7 on the page of the European driver Toshiba, it seems that you have to collect the pilots in his own hand.

  But in general this should not be a problem of submission.
  WLAN, LAN drivers can be downloaded from the pages of chip manufacturer driver touchpad can be used in other models of computers, laptops and Toshiba as VAP (value added package) Flash cards tools or similar

• Installation of El Capitan problem: "an error occurred during the preparation of the installation. Try running the application again. »

  I've been a fight 2 days now trying to improve my iMac 21.5 2009 end of Mavericks in El Capitan, but as the installation is about to be launched I get this message "an error occurred during the preparation of the installation. Try running the application again".

  Here is a list of all the things I've tried:

  Running the application again;

  Move the installation to another folder application;

  Control date & time and it was already correct;

  Do the installation in safe mode;

  Installation of the upgrade of another user I created only for that purpose;

  The computer restarts and I tried install the upgrade several times;

  And, to be sure that the installation application was not corrupted I made a copy of it on an external HD and tried to install it on my 2011 MacBook Air and it worked (I didn't install because I have El Capitan installed on my MacBook).

  Well, I don't know what else can be done, and I'd rather not have to completely restore my iMac.

  Please try installing again after taking each of these steps you have already taken it.

  Step 1

  Reset the PRAM from your computer.

  Step 2

  If possible, set the clock system as indicated here. If you can only boot into recovery mode, see below.

  In the OS X Utilities screen, select get online help. Safari will launch. While in recovery, you will have no access to your bookmarks or history. Load this web page.

  Triple-click anywhere in the line below to select:

  date 0801000014

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Quit Safari. You go back to the OS X Utilities screen.

  Select

  Utilities ▹ Terminal

  in the menu bar. It will open a Terminal window. Paste in the window by pressing the command-V key combination.

  Wait for a new line ending with a dollar sign ($) below what you entered. If it does not appear, press return.

  Quit the Terminal to return to the main screen.

  Step 3

  If your model has replaceable memory by the user and you have upgraded modules of memory, reinstall the original memory and see if there is any improvement. Make sure not to touch the Gold contacts. Clean them with a mild solvent such as rubbing alcohol. Spare memory must exactly match the technical specifications of the machine. Do not install more memory to the maximum value specified, even if a seller of RAM, or someone else, said you that it will work.

  Step 4

  Back up the data at least two different storage devices, if you haven't done so already. A backup is not enough to be sure. Backups are possible with Time Machine or disk utility. Preferably both.

  Erase and install OS X. This operation will destroy all the data on the boot volume, if you be better be sure backups.

• Is it possible to run DiagOnCAN with the NI-CAN driver only (without car Diag command Set)

  Hello world

  Is it possible to run DiagOnCan without using Diag command set auto - only with the NI-CAN driver (hardware I use is low tolerant speed - USB8472 and NOR-XNET)?

  G. Petko

  no problem to do with your hardware and NI-CAN frame API.

  However, you must implement the Diag and Services Transport layer on your own, which is quite a big job.

  I recommend you spend the money for automotive diagnostic command set that supports

  • NI CAN (PXI, PCI, PCMCIA, USB)
  
  
  • NOR-XNET
  
  
  • cRIO/985 x target (Pharlap and VxWorks) #.

  which means that if you plan to transfer your application in the future to different hardware target or the real-time target, that you don't need to change your app at all.

• Error when you try to run an application that worked when built with 8.6

  I have a simple program that I wrote in the 8.6 version that I've never had a problem generation and execution of applications built with it to 8.6.  Two weeks ago, I got 2009 by mail because we had very recently purchased 8.6 and I get errors when you try to run an application built with the same code using 2009.  The error relates to the Mean.vi.  He claims that he can't find it.  The error I get is as follows:

  Error loading VI 'NI_AALBase.lvlib:Mean.vi '.  LabVIEW support 3 error code: could not load façade.  I don't have access to the front panel of this vi, so I wonder if there is a problem with the runtime and not my code.  Please answer as soon as possible because it will quickly start to the impact of my calendar.  Thank you.

  Hello!

  The same problem ?

  I talked with my local OR technical support team. The application now works without any problem.

  Rule of thumb: when creating a Setup program do not forget that the option "Run Time Engine xxxx" in the category "Other installers" is selected despite the fact that the runtime is already installed.

  Best regards.