Is it possible to save e-mail messages in a folder on the hard drive of my computer

Similar Questions

• I got to level only the hard drive in my computer and now I keep getting messages that my Windows 7 is not genuine

  I got to level only the hard drive in my computer and now I keep getting messages that my Windows 7 is not genuine
  and my windows update software no longer works. When I check the status of my activation of Windows 7 in the computer
  Properties, it is reported that Windows IS enabled. When I run the Windows activation repair tool it will fail
  and I get the following error messages: 0x80004fe21 and 0xC8000247. I also tried the Windows FixIt tools for
  activation and Windows Update without success.
  Please email me or call me with suggestions or PH 513-289-4785 thanks

  Tool Windows MGA results

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Code of Validation caching online: 0x0
  Windows product key: *-* - B72VQ - G6RKT-G7B6M
  Windows product key hash: ISzyTLRWNXmB8 + BGCAyBkfJVOE0 =
  Windows product ID: 00359-OEM-9804563-10468
  Windows product ID type: 8
  Windows license type: COA SLP
  The Windows OS version: 6.1.7600.2.00010300.0.0.003
  ID: {47CDEE04-15E7-4393-823C-9F19163CCB88} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7600.win7_gdr.110408 - 1633
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Enterprise 2007 - 100 authentic
  2007 Microsoft Office system - 100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_B4D0AA8B-920-80070057

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7600.16385], Hr = 0x800b0100

  Other data-->
  Office details: {47CDEE04-15E7-4393-823C-9F19163CCB88}1.9.0027.06.1.7600.2.00010300.0.0.003x 64*-*-*-*-G7B6M00359-OEM-9804563-104688S-1-5-21-4105253140-3248553093-608739849ASUSTeK Computer Inc.        UL80VT American Megatrends Inc.. 214 20110117000000.000000 + 00061B83607018400F804090409Eastern Standard Time(GMT-05:00)03_ASUS_portable100100Microsoft Office Enterprise 2007129AF2C442EAD0F143bTpphlGMO63Fl + N/RWz9H3zae4 =81599-906-1700076-651751100Microsoft Office system 20071219

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_COA_SLP
  Activation ID: 5e017a8a-f3f9-4167-b1bd-ba3e236a4d8f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00196-045-610468-02-1033-7600.0000-3172012
  Installation ID: 104731195014616722429474505736359264920732256592507294
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: G7B6M
  License status: licensed
  Remaining Windows rearm count: 2
  Trust time: 28/11/2012-09:54:21

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 11:22:2012 12:30
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current HWID of Hash: LgAAAAEAAQABAAEAAAABAAAAAwABAAEA6GFyGfz73n8sErBkTCA4/HhDcKpGyg ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC1150 011711 APIC
  FACP 011711 FACP1150
  DBGP 011711 DBGP1150
  HPET 011711 OEMHPET
  START 011711 BOOT1150
  MCFG 011711 OEMMCFG
  SLIC _ASUS_ Notebook
  CO-SUBMISSION 011711 OEMECDT
  LASRYVITRAGE 011711 OEMB1150
  GSCI 011711 GMCHSCI
  SSDT PmRef CpuPm

  The common cause for these mismatches is a defective Intel Rapid Storage Tech driver

  Download and install the latest version of...

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=21730

  Then run another MGADiag report and view the results.

• How to change the path of a file download? Sometimes, I want to save a file in a specific folder on my hard drive and I don't know how to do it. Thank you.

  There is a default folder for downloading files from the internet ("Descargas" or "Downloads"). But, what can I do if I want to save the file to another location on the hard drive?

  Thank you.

  Options > general - in the middle of this window see downloads

  Save files to:-then click on the Browse button to set different default location to save downloads. Or, select always ask me where to save files.

• I published a version of my Web site on the server of catalyst before the hard drive of my computer crashed, is it possible for me to get a copy of MUS of this website published on my computer?

  My computer crashed and I'm unable to retrieve from the hard drive. Is it possible to get a version of the server catalyst mus? will be - this slot a usable form to modify in the MUS?  Can anyone help?

  You cannot load HTML files in Muse. Muse needs the .muse file to work with.

• Cannot import Windows Mail 6.0 files after reformatting the hard drive

  Desktop HP of my wife had to be reformatted.  It is under Vista Home Premium.  Email is vesion Windows Mail 6.0.  I exported all the personal files in Windows Mail she wanted, through the export feature.  They are stored on a DVD right now.  The problem is that once I have reformatted the hard disk to the original factory conditions, I can't import files or messages.  The import in the Wizzard options is for Windows Mail (with outlook and Express) 7.  When I choose 7 Mail I get the following error message: "no messages are located in this folder or another application is running that has the required files open.  If I navigate to the actual stored email files on the backup DVD I can open individual emails so that they were saved.  What can I do?

  It is a bit of extra work, but it will do the job.

  • Copy the files from the DVD to the desktop.
  • Open WinMail and create the folders that you need to match those on the desktop.
  • Open a folder on the desktop and you should see all of the messages as .eml files.
  • Select all, then right click on them. Drag the corresponding folder of WinMail and copy here.

  That worked? You can remove the files from office once facts.

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• My office wouldn't boot and I received a S.M.A.R.T. message that told me that the hard drive was bad. I changed the hard drive, but it is always the same. It is running windows zp.

  My desktop computer running windows xp. It begins to start but stops and keeps trying to start. It does not start in safe mode or any other mode. I have mfoundm a message that says S.M.A.R.T. and told me that my hard drive was bad. I replaced the drive hard drive with another drive that has been loaded with xp but it stil is.

  I think that the answer to the replacement hard drive is in your question.

  I replaced the drive hard drive with another drive that has been loaded with xp but it stil is.

  You can not take a hard drive that was in another computer when the Windows installation, place it in another computer and boot from it. You will get a boot loop. It will start to load Windows then suddenly, re - start. This will be repeated again and again. You must install Windows on the disk hard while it is in the computer that you intend to use it with.

• Messages to activate after moving the hard drive to a different computer

  M.

  I moved a drive of a machine that worked a little better. The drive works fine. This silent activation keeps appearing. I took the car to a Sony Viao which is about 8 years old and that worked very well except a few small problems

  which were resolved by moving the hard drive to another machine. How to get down this thing of activation? I tried all the things that appear, but they do not match because I changed machines. I'm getting pissed.

  Reinstall windows. You can just change the hard disks from one system to the other. And expect things to work correctly

• Cant't save and clear the event logs to a folder on the hard disk

  I have a new hp laptop under windows7. When I try to erase and save the event logs to a folder on the hard drive, I get a message saying that it cannot save the file to the network location despite the fact that I'm not saving to a network location.  I can record the events first and then to clear the logs.  But can not use the option "save and clear."  What could cause this problem?

  Hello

  1 when was the last time save and clear option has worked?
  2 have you made any changes to the computer before the show?

  Run the System File Checker and check if it helps.

  Follow the steps in this link: http://support.microsoft.com/kb/929833

• is it possible to send e-mail messages using Blackberry Bridge on playbook?

  Hello

  is it possible to send e-mail messages using Blackberry Bridge on playbook.

  We can compose new emails on playbook using Bridge and is it possible to send e-mail?

  Another question: is it possible to install Blackberry Bridge Simulator playbook?

  Thank you & best regards

  Megha

  1. There is no access bridge apps or files at this time. The bridge is implemented as a secure area to access resources on a BlackBerry smartphone, and we do not know when (if ever) RIM provide APIs for these services. Currently, the bridge is very restrictive by design. For example, attachments are downloaded on the smartphone and the PlayBook user cannot open them unless the bridge connection is open. You can't even copy text from an application open and paste into an application non-pont. You need access to a web mail service to send emails of PlayBook.

  2. the bridge is not available on the Simulator and I doubt if she will ever be. See point 1 above.

• How to recover contacts from Windows live mail email messages from the hard drive.

  I was download my messages to e-mail AT and T through Windows live mail (Pop3). My computer has a hardware problem and stopped working.

  However, the hard drive is fine and all the data is safe. I now have a new computer. How can I transfer old computer to the new e-mail and messages

  Windows live mail in the new computer can actuall import the old e-mail messages and contacts.

  Plug the old drive to the new computer.

  You may need to show hidden files to see the records of WLMail.

  olddrive:\Users\old Live Mail

  Drag and drop messages into an open folder of WLMail.

  If you have been given a copy of messages on the AT & T server you have duplicates.

• Save the files and format the hard drive?

  I have a MacBook 2012 mid pro and the hard drive fills up with data and applications, I don't want anymore. So I want just to format the drive and install a fresh OS x and only the applications and the data I need. Is it possible to just copy the folders with the data I want to save... on an external drive?... like music, movies, Documents... then format my internal drive and load El Capitan. When can I then copy these files on the original drive and have things work the same or improve skills?... when using Photos and iTunes and iMovie? I do not use Time Capsule... cause he will restore a bunch of stuff I don't want. Has any tried this? or have better ideas?

  Yes, you can if you wish. Don't forget some features such as the preferences settings will be not recorded, unless you know where to look.  As for iTunes and Photos you must register the complete library of media files.

• T5i - save videos directly on the hard drive of the PC?

  Hello world. I am new to using cameras and have recently bought my first, a Canon Rebel T5i.

  I'm starting to use it to record videos of talking head and it works fine. I'm not having any difficulty using it, but I'd rather recorded video, she writes directly to the hard drive of my PC, and not his flash drive.

  Is it possible to get there?

  I'm looking for in the instruction book and tried to find the answer on YouTube, but made no progress.

  Any help would be appreciated.

  Thank you

  Buck

  Hi Buckspub,

  When you use the EOS utility, provided with your camera, shooting distance mode, it is not designed to record movies on your computer in real time.  In most cases, you will receive a pop-up window prompting you to save your data remains on your computer.

• try to save the contents of the hard drive for drive external hard error0.80070020. Spike

  Try to back up the hard drive internal to an external hard drive, Windows Vista. Error message 0.80070020 receipt, no return to the top. Spike

  Hello

  1. don't you make changes on the computer before the show?
  2. What is the accurate and complete error message that appears on the computer?
  3. How do you back up the hard drive?
  4. are you using Windows backup and restore, or you are using a third-party backup program?
  5. do you use windows backup and restore?

  Method 1:
  Clean boot the computer, and then try to save the contents of the hard drive and check:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.
  
  Method 2:
  You can also try to disable antivirus and then try to backup. Follow the steps in this link: http://windows.microsoft.com/en-US/windows-vista/Disable-antivirus-software

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:
  If the problem persists you can try running the disk check and check hard disk errors:
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
  Note: When you run the disk check, there is a risk of data loss, you can take a backup of the data on the drive before running the disk check
  Note: This link is applicable for windows vista.

• Is it possible to replace the hard drive with an SSD? or would it be too expensive?

  Is it possible to replace the hard drive with an SSD?

  or would it be too expensive?

  Yes.  There are several alternatives.  I found a way relatively inexpensive, using a map of mSATA (very small SSD) and an adapter to connect it to the connector IDE 44 pin internal of my PowerBook.  It works very well.  Rather than repeat what I posted previously, you can watch these two topics (which also has good info, other users)

  Re: This win to install a SSD drive in a PowerBook G4?

  Re: SSDS  (my post is halfway - "this is how I did with my trusty Pismo...) »)

  FYI - I have used the adapter is even cheaper now

  https://www.Amazon.com/GP/product/B009BA8V4M

• I want to save my email and then reinstall it after that I have to wipe the hard drive.

  I'll update the hard drive wiping and reloading the software I want, get rid of the junk that I have collected over the years. I backed up my data, photos and music from My Documents, etc. but I can't figure out how I can save my email so that when I reinstall Thunderbird I can just empty files saved in the program and I'm back in business. I'm sure that's not hard, but I don't know the meaning of "Computerese" I get lost in technical language. How can I do this?

  Thanks for your help.

  If you have saved your whole Documents & Settings (or 'Users' since Vista) then you have probably already what you need.

  Thunderbird stores your data and profile settings.

  https://support.Mozilla.org/en-us/KB/Profiles-TB

  (Firefox also uses its own profile).