Is it possible to set up in windows 7 for my printer HP psc 1315 all in one...?
.. .or is not possible, and it is best to think about to buy a new printer!
I was wasting far too much time trying to set up many "good drivers" for this device and will never work ok
My question is simple: "there is a device that works well with HP psc 1315 all-in-one Windows seven?
Thanks in advance ;-)
Peter
IF this is your printer/scanner - http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=374568#N223 then there are drivers W7 32 and 64 bit available for this purpose.
Everything on the PC concerned with your HP printer uninstall, restart the PC, then download and use the appropriate driver (W7 - 32 or 64 bit depending upon need) and see what happens then.
Whatever it is, as its apparently supported, you're probably better asking HP if you did not already.
Tags: Windows
Similar Questions
-
Example:
NNooww iiss tthhee ttiimmee ggoooodd mmeenn ttoo ccoommee ttoo tthhee aaiidd ooff tthheeiirr ccoouunnttrryy aallll ffoorr...
Print appears as above, except that the spacing between the characters seem to be a space of 1/2 rather than a complete space.
Thank you
Hello- When you try to print?
- What were the changes made before the show?
- How long have you been faced with this problem?
You can view these methods:Method 1:I suggest you to check the print preview .Method 2:Uninstall the driver and the printer software:
1. open devices and printers, click the Start button, and then on the start menu, click devices and printers.
2 - Click on the printer you want to remove, click on remove the device and then click Yes.
If you can't delete the printer, right-click again, click Run as administrator, click on remove the device and then click Yes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.3. click on the properties of high print server of the screen and select the tab drivers, under delete evyrhing is installed as a printer except the xps document writer and send a note to the driver package.
Step 2.
Install the printer.
Now reinstall the printer, refer to the article below to install a printer.
Install a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers -
My printer prints too high on the page. Regardless of the printer or document settings, the first line prints at the top of the page. This problem is not present with Notepad, but appears with WordPad and Open Office Writer. How can I pay for this investment?
Response to Shane_R:
I spoke too soon. I think that I was not successfully download these drivers because I received messages that the original driver has not been installed. (Don't know why it worked once.)
In any case, I found an old link to the HP site for my all-in-one model that provided a full hybrid software and driver download makeover. I installed it correctly and so far everything works better than before. Thanks for me toward the pilots initially.
It comes to seventh year of my printer and second course of youth. Now maybe he'll go another seven.
-
I insert the cd but it tells me that it is not supported.
the cd for the version 6.0. do I need an updated version in order to get my printer working?
For starters, you have given a serial number of the printer, not the printer number.
Go top HP website, get the right drivers and install your printer.
Details of HP: http://welcome.hp.com/country/au/en/contact_us.html
See you soon.
Mick Murphy - Microsoft partner
-
I have a hp type copier printer scanner hp 1355. I need a driver (software) for this. If the HP all-in-one device is not suitable for use on WINDOWS XP, is it possible to use hp 1355 in the WINDOWS XP operating system? Thanks FOR YOUR HELP.
Hey Fed-Up-with-HP,
Try using the brush included in the CD or download. Let me know what you find?
Of the Original installation CD:
1. Insert the CD in the drive and then cancel Setup
2. open my computer and click right then on the CD from the drive and select open
3 open the Util folder
4 open the CCC folder
5. run the uninstall_L4 (exe or Bat)
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
8. download and install the latest version of Adobe flash player
http://www.Adobe.com/support/flashplayer/downloads.html
9 download drivers and full software features
10. run the download to reinstall the printer
If the software has been downloaded and extracted to your system:
1. type % temp % in the field of race
2. Locate and open the folder starting with 7z (example: 7zS2356)
3 open the Util folder
4 open the CCC folder
5. run the uninstall_L4 (exe or Bat)
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
8. download and install the latest version of Adobe flash player
http://www.Adobe.com/support/flashplayer/downloads.html
9 download drivers and full software features
10. run the download to reinstall the printer
-
Hey @Manu37520,
Welcome to the Forums of HP Support!
I understand that you have some problems with the scanning of your PSC 2210 all-in-one printer to your PC for Windows 10. The printer has no drivers for Windows 10. You will need to use a computer with an operating system prior to analyze.
Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.
-
Set a static IP address for the printer
One of the most common steps given when members of the community have printers that will remain not connected is affecting the camera a static IP address. Most of the members to respond to messages will include a document that's going to work on the steps and it is very useful. I found a video which will also show you this process on a printer Photosmart 7510.
It will go well to enter the IP address of the printer in the web browser and access the built-in web server (EWS). Once in SAP, it shows the path to take to set the static IP address for the printer. I thought it would be a good video to share with the community so that there is assistance available for those of us who are visual learners. Here's the video promised on the static IP address.
I hope this helps the community. Good impression to everyone!
-
HP Psc 1610 all-in-one: Hp psc 1610 without Windows installation
I'm trying to see if my printer will be able to work without the Windows installation disc. I have a HP PSC 1610 all-in-one printer. I'll buy the cable from Sun to hang it to the top, but I can't find the drive mentioned in the installation program. I don't know if it makes a difference, but I have a MacBook Air with Windows. Comments would be appreciated for what I can determine if I need to buy a new printer.
Windows 10 has a 1600 integrated printer driver, just us the option to Add a printer in Printers and devices.
-
How to get the printer laserjet 3015 of all-in-one to work with hp520 touchsmartpc 64-bit with windows 7
Hi baldwinj,
Follow the steps outlined in the document below to install the OS driver in for this printer in Win 7 64 bit.
-
Windows xp for a Dell c400 install on all the computers other than the particular model?
Windows xp for a Dell c400 install on all the computers other than the particular model? For example, a Dell inspiron 2200 or 1100 or bridge or Compac.
Hi sammytate,
If you have a Windows XP installation disc, you can install it on all computers, regardless of the brand & model computers.
However, the product key that comes with the only usable installation disc on a particular computer.
Hope the helps of information.
-
Windows RT and HP PSC 1510 all-in-One printer connection
Hi, I have a Windows 8.1 RT (Microsoft Surface 2) Tablet and HP PSC 1510 all-in-One printer cable. Now when I plug the printer via the USB port, there is no driver who finds himself to make this printer work with my camera. Does anyone have this problem or solutions? I tried to look at HP support and nothing there has been useful.
Hello
I'm afraid that the printer is not supported on Windows RT, as you can find listed in the following support document:
http://support.HP.com/us-en/document/c03168175
Kind regards
Shlomi
-
Windows 7 includes drivers for HP PSC 1410 all-in-one?
I am about to replace my Office Tower (currently Windows XP) for one, with Windows 7 pro is installed. I don't have a disk for the drivers for my printer PSC 1410 All-in-one. Are they included in Windows 7 where can I download the free after plugging in the new Tower?
Hello
You can download the drivers from the followung link:
Be sure you do not connect USB until the installation invites you to do so.
-
PSC 1210xi All in one driver for Windows 7
I have a PSC 1210xi all in one. When I put in my product for downloads, the choice in "Printers and multifunction" developed as all-in-one HP PSC 1210 or all-in-one HP PSC 1210V. I have a new laptop that is running WIndows 7. Should what download I choose? I have loaded the original software for HP PSC 1100 series-1200 series, version 2.1.0. Thank you.
Hey Kan02. You don't need to download a driver for this printer, the driver is integrated in Windows 7. Here are two options on how to install this printer:
Option 1:
You can follow this document to install the printer: the driver for your product is included in the Windows 7 operating system
OR
Option 2:
You can use the HP utility Windows 7 printer to install.
Both of these options should get the printer to the top and runing for you.
Take care
Sean
-
Re - install a hp psc 1401 all-in-one for windows 7 64 bit
does anyone know how to re - connect a hp psc 1401 all-in-one for windows 7 64 bit? This configuration worked flawlessly for several years now, but it has suddenly stopped working. I discovered that this model is even more appears on the software and drivers HP site. Peroxide of hydrogen used to have such excellent customer service, but now it's like this all-in-one is useless without the right software.
Hello
The HP PSC 1401 software can be obtained from the HP site.
Here's the product page with the download of the software of your device:
Kind regards
Shlomi
-
HP PSC 1350 all-in-one driver for Windows 7 - driver not included!
My Windows 7 64 bit is supposed to have the included driver for my HP PSC 1350 all-in-one, but he's not here. When I use the "Add Printer Wizard" single PSC series included is 1500 and 1600. I don't have the installation disc (this is a printer to work and they don't give me the disc when they gave me the printer). Now all the sites I go to driver to tell me that the driver is automatically included in my Windows 7, but it isn't here. Help!
If I try to use the pilot for the series 1500 instead, I get a warning that my printer is working properly or that my computer may not work at all. Another driver which is compatible, or how can I download the correct driver?
Yes, the PSC 1300 series includes the PSC 1350, this driver should work fine.
Maybe you are looking for
-
HP Pavilion Media Center a1610n problem
So I had this problem which started today. When I booted my PC: HP Pavilion Media Center a1610n - it goes to the startup screen with the HP logo but it remains just there frozen. Another thing I have noticed is my mouse and keyboard are not powered a
-
Maybe I'm doing something impossible, but I want to associate my Droid Razr with my FE Xoom using Bluetooth. They have successfully pair but not connect. I basically want to share the data from my phone without paying for the wifi hotspot or phone ro
-
I got my windows vista ultimate administrator standard user account.
I got my windows vista ultimate administrator standard user account. Now whenever I try to update or install "User Account Control" is constantly asking me to (type an administrator password, and then click OK). The problem is that I can't do this be
-
Win 7 Error Message 802400B installation failed KB3079757
Hello I have a problem with the 802400B error that I receive with a vain attempt to install KB 3079757 via Windows Update. Now I can't get other updates - it simply repeat the download of updates, but never does. I had about 20 important updates - it
-
Studio 1735 and Adobe first Elements - error CODEC Audio IDT high definition
Receive the error code in Adobe first Elements on my Studio 1735 trying to read the video capture. Error is FFA-8-000 D; also says "failed to read. The audio system does not appear to meet. Maybe the card does not support full duplex mode. Any ide