Is it possible to skip the user selection screen and go directly to the login screen

Similar Questions

• Is it possible to customize the login page customer web email?

  Is it possible to customize the login page customer web email? It would be wonderful to be able to offer my clients a personalized and wonderful connection Web page.

  Thans in advance!

  Diego

  Hi, no you can't.

  This is a 3rd third party vendor offering.

• Possible to delay the login items?

  Implementation of Adobe to open the connection software has created more problems than it is worth. I use Photoshop, Bridge, first and every day hearing as part of the same project, all related. I thought I would put them in place to open the connection, to save time.

  However, the location of the Cache for all download and also the folder for my Google Backup Drive, on an external drive, and if it is not present when the software tries to open, things go haywire.

  Is it possible to delay the opening of the connection points, by, say, 10 seconds?

  No, it's on or off only, there may be a 3rd party app that can do it, but you will need to check the app store.

• Is it possible to recover the logins.json.corrupt?

  Yesterday, I lost all my passwords after a bizarre episode (see https://support.mozilla.org/en-US/questions/1085073 and https://support.mozilla.org/en-US/questions/1085300 ). I have a file logins.json in the folder of my profile with any passwords, I was able to rebuild, and in the same folder is logins.json.corrupt (27K, 24740 characters according to the Texpad, but none of them visible - blank page). This response (https://support.mozilla.org/en-US/questions/1054932 ) - reset signon.importedFromSqlite, close FF, delete logins.json and re - open - did not work. But I have re-set 'value (user)' in signon.importedFromSqlite - maybe I should reset 'value '?

  Just checked - reset the value did not help either.

  COR - el said

  You can check if there are previous versions of the files logins.json and key3db.

  • Right click: properties > Previous Versions

  • http://Windows.Microsoft.com/en-us/Windows7/previous-versions-of-files-frequently-asked-questions

  There is no way of knowing if you have a correct signons3.txt file.
  If it works, then you see the names in the password manager.
  Otherwise, you will see an error message or a blank password Manager window.

  Yes! Thank you 1 million. Get all of my passwords.

  For those who have found this answer: I opened my profiles, right-click on logins.json file, having consulted the "Previous Versions" property page He produced a list of three. In the list, right click on one of the last week, the option is useful that was 'copy '. Copied and pasted on the desktop, where logins.json recovered appeared. Then copied logins.json current profiles Safe Placez_ the (fair value), and then deleted the Profiles folder and replaced with the recovered version.

• Windows 7 - after selecting a USER, the computer opens the selection screen of the USER - code throws again: 2000-0146 to diagnosis

  Computer seems to boot correctly.  Once a USER is selected in the USER SELECTION screen, the computer seems to proceed... but then the USER SELECTION screen opens again.  When you run the Diagnostic tests, the only error is 2000-0146

  Hello

  Thanks for posting your question on the Microsoft forums.

  I understand that you have a problem on your Windows 7 computer. I would certainly help with this question.

  This problem started after the recent update installation of Windows?

  Some members of our community have reported similar problems after the recent update of Windows KB3097877 installation on

  their Windows 7-based computer. The update has been re-released, uninstall and reinstall the update can help us get this problem is resolved.

  In order to solve the problem, I suggest you try the steps posted by Akil P responded on November 13, 2015 in the following thread and check if the steps help you to solve the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/flickering-screen-and-sign-in-problems-on-Windows/df9c8255-587f-4DBF-BB45-6639b29dc4ae?TM=1447375680761

  Hope this information is useful. Let us know if you need additional assistance, we will be happy to help you. ___

  _____________________

  Thank you best regards &,.

  Isha Soni

• '- moz - user-select' and '- khtml - user - select' in spryaccordion.css won't validate

  Hi guys,.

  Recently, I have validated all my htmls, and my following rage did the same thing with my CSS style sheets.

  On my spry accordion css, I have under .accordionPanelTab ' - moz - user - select: none; ' and ' - khtml - user - select: none; I did a google search and it is said that they will affect netscape and I assumed that firefox, but I removed the completely and checked the website - and I don't notice any difference.

  Are they necessary? Is there a way I can modify the code to validate?

  Thank you all,

  Jon

  As an alternative to the fixing of these individual errors, suggest using an IE-specific stylesheet, or I guess that Mozilla/khtml-specific, with conditional comments?

  Conditional comments are an invention of Microsoft around the fact that IE was / is not web standards. You cannot use the CCs for all other browsers.

  I refuse to believe that the hacks are completely necessary if they do not validate.

  Answer to yourself.  If all you want is a very basic site which kind of works in most modern browsers, but not too well in older, don't hesitate to jump the hacks.  That's your prerogative.

  There must be a way around this, otherwise the creators of w3 standards would have to realize that they are essentially meaningless and ignored... right?

  Back in the day, before the W3C intervened with the mandates for Web Standards, there was chaos.  Each new browser had its own set of proprietary standards (IE, Netscape, and AOL were the Giants).  The Web designers (myself included) were created on our sites "this site works best in the [insert the name browser and version here].  It was completely crazy.  IMO, the W3C has made things much better by specifying standards and educating webdesigners and developers of the browser to see the light. All except MS IE, of course.  IE still moves to the beat of a different drum.

  Adaptation of the browsers to accept the changes takes R & D, beta testing and upgrades to date.  Mozilla, Gecko and WebKit are taking the lead in this regard.  But a full support for all the new CSS3 tags like Border-Radius and User-Select are still evolving. During this interval, we can either use specific tags to the browser for browsers that need it, or choose not to use the property at all.

  IE9 is committed to support all courses CSS 2.1 and the new CSS3 properties, but it will be at least 1 year before it is ready as a release candidate.  Then it's likely another 4-5 years before we can stop supporting IE7 and 8.

  Add to this mixture the next HTML 5 web standard.  It is not yet finalized, but when this is the case, browsers must be redesigned to accept the new tags.  Some older browsers will never be able to accept the new tags.  Yet once, we will need to conditional comments, scripts, and other hacks to help ensure a good user experience for everyone.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB
  http://ALT-Web.blogspot.com

• Oracle UCM how to ignore the Login page.

  Hi all
  
  I have the following questions regarding the UCM login without SSO solution screen to jump.
  
  
  1. is it possible to switch the connection of the Complutense University of Madrid passing the username and password in the url? If yes how.
  
  2-stellent 7.5.1 we can add plugin for IdcAuthPlugin Web server, it will give the ability to customize authentication.
  Is it possible in UCM11g as well?
  
  3 do we need to create our own authentication provider in weblogic to skip the login screen?
  
  
  Thank you and best regards,
  Karai
  
  Published by: karais on January 14, 2013 12:49 AM

  You can add credentials on the URL in following this:

  http://www.redstonecontentsolutions.com/5/post/2011/07/one-click-login-into-the-Oracle-content-server11g.html

• Error: "it is not possible to disable the connection at this time. "This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

  Original title: unable to disable my lan connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I turn off my connection to the local network, it is showing message.

    It is not possible to disable the connection at this time. This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

    Please answer soon

    You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi MVTDA,

  You can try the following methods and check to see if it helps:

  Method 1:

  a. Click Start and select run, type cmd and click OK.

  b. type net stop cryptsvc and press ENTER.

  c. type ren %systemroot%\System32\Catroot2 oldcatroot2, and then press the Enter key.

  d. restart the computer.

  e. open new command prompt and Type net start cryptsvc, and press ENTER.

  Method 2:

  If the same problem persists then you can try to uninstall the network drivers and check.

  a. click the Start button. Select run, type devmgmt.msc and press OK.

  b. Select the network card and right click on it.

  c. now, select Properties.

  d. in the Properties window, on the driver tab, click Uninstall.

  e. After you have uninstalled the drivers, restart the computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Log in failure: the user profile Service failed to connect. It is not possible to read the profile of the user.

  Hello
  Trying to create a standard account on a new Windows 7 computer but can not connect. The message with my Swedish translation is: user profile Service failed to connect. It is not possible to read the profile of the user.
  Can someone advice me?

  Hi Lagun,
   
  Step 1:
   
  I suggest you to follow this link below and check if this solves the problem.
   
  Now search for the question.
   
  Follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
   
  See also:
   
  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215
   
  Important: the above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
   
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/
   
  Step 2:
   
  If you need assistance in Swedish, below the URL provided will help you receive support appropriate for your location information. Open the link and select your region from the drop-down list, and then click the arrow to continue.
   
  http://support.microsoft.com/common/international.aspx.
  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Image display the user selected using FileReference

  I use FileReference to allow users to choose an image of their hard drive. Once the user selects the image I would like the image to display in the .swf before they download it.
  
  I tried this:
  
  fileRef = new FileReference();
  ....
  var bmpData:BitmapData = BitmapData (fileRef);
  var bm = new Bitmap (bmpData, "auto");
  screenHolder.addChild (WB);
  
  and this:
  
  var loader: Loader = new Loader();
  var request: URLRequest = new URLRequest (fileRef);
  Loader.Load (request);
  screenHolder.addChild (loader);
  
  but these don't work.
  
  does anyone have any suggestions? What I do is it possible? Or do I have to use a server?
  
  Thank you!
  
  

  Thanks Kglad, you are always so useful, even if the news is bad :)

• 32AV933G: is it possible to access the image user mode play movies on USB

  Hello!

  Recently, I bought a 32AV933G, based on the features and was very surprised by the good image quality.

  My question: is it possible to access the image of the user mode when playing movies media player USB?
  I can't get the preset Standard, mild, film... I can't even the Menu to adjust the settings.

  I guess that's how TV has been designed. You can change this in the next Toshiba Firmware? Please, I beg you!
  Also add some features before etc, Play/Pause, the remote control.
  Perhaps using coloured Teletext keys. Just a suggestion.

  If anyone can help with this, thank you!

  > My question: is it possible to access the image of the user mode when playing movies media player USB?

  I didn t find all the details about this in the user manual.
  So I guess that's not possible.

• Is it possible to configure the same user for 500 systems that run under XP & Win7?

  Hello

  About 500 systems are run under Windows XP & Windows7, is it possible to use the same user for all 500 systems?

  Hi SupportRI,

  Windows Live family safety is no longer manages the accounts of children using Windows Live ID Windows Live ID on behalf of the child is essentially used for the feature of managing contacts (restrictions on the use of Hotmail and Messenger). Currently, parental control can manage Windows users; However, if you have already configured a Windows Live ID account before the update, it will be always available. You can see the thread below for more information.

  Where is the function of the safety Contact family management?

  If you intend to use Windows Live Family Safety for all users of 500 to restrict the Internet connection, please note that parental control does not restrict the Internet and Web sites. You also have the option in the list of content filtering Web to apply the rules to all users under the Family Safety.

  For more information on how you can install Windows Live Family Safety, please visit the link below.

  Protect your kids with parental controls

  Thank you!

• Get the message: it is not possible to load the user profile after Windows updates

  Original title: Windows won't let me sign after updates

  Last night when I turned off my computer I saw that he had a few updates to do let him - now it won't let me login and when I try to it says that it is not possible to load the user's profile (it's the only one)...

  Recently, I installed Office and Windows 7. My anti-virus is the one that is provided by microsoft. Help!

  Hi romanista,.

  You can read the following article and check if it helps to solve the problem:

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  http://support.Microsoft.com/kb/947215

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• MUI (multilingual user interface) - it is possible to load the necessary software to a machine running XP to corespond in other languages (Japanese, specifically)?

  I am currently a student on a course of Japanese language. I use a homemade computer and it runs under Windows XP. I would like to be able to correspond with people living in Japan, with Japanese text (Hiragana, Katakana, and Kanji). I understand that I need a MUI (multilingual user interface). Is it possible to install the software on my computer? Another possibility, what is the most effective way to achieve this? I live in England and computers do not come with this already installed. -Thanks in advance - Fred.

  You are Windows XP Home Edition? or professional?

  If you run Professional, you can follow this link to download a MUI

• Is it possible to remove a user account if I don't remember the password

  My gf put up a user name and password on a net book, she has forgotten her password. Is it possible to delete his user name, it rises as soon as windows rises.

  Hello

  · This is the administrator account you are talking about?

  If this is the only account is an administrator account, then you will need to follow the steps in the link below: how to connect to your Windows XP-based computer if you forget your password or if your password expires on: http://support.microsoft.com/kb/321305

  If the user account is not the administrator account, you can then log on to the administrator account and follow the steps from the link below: to remove a user account: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/lsm_delete_user.mspx?mfr=true