Is it possible to take it on a hard drive from a Mac 2008 year put in a newer model?

Similar Questions

• Is it possible to change the 500 GB HARD drive with an SSD on my HP Pavilion MS228sc?

  I wonder if it is possible to change the 500 GB HARD drive with an SSD on my HP Pavilion MS228sc?

  If 'yes', I guess I have to go for a SATA SSD if there is. But I have to worry about other specs?

  If 'Yes'... what could be.

  I googled my question but no answers... so I ty Wizzards :-) Forum

  @Lord_Nikon

  In fact, this is not true. As long as he uses a large SSD enough it will be able to use the recovery media. I suggest using a SSD of 256 or 512 GB if budgeted for the upgrade...

  He doesn't have to make a Windows 7 installation USB drive and use the activation key license on the certificate of authenticity from the PC Windows to perform a cleanup to install.

  One of them should be on your PC. The Prodct key is what is needed for installation and activation online.

  

• S50 satellite - B - 15 p - it is possible to add addional SSD or HARD drive?

  Hello

  I recently bought a laptop Satellite S50 - B - 15 p.
  I'm very happy with it

  My question is about its SSD drive
  It is now 128 GB.

  It is possible to add addional SSD or HDD.

  Or replace the current by the new with a higher capacity.

  My best regards

  I don't have this model of laptop, but according to some pictures I found isn't Googling around this model of laptop SSD? HARD drive covers in the lower corner, therefore, as a general rule, these updates is not supported and should not be done by the owner of the laptop.
  If you want to have full access to the SSD, you must remove the lower cover and it can be done by authorized personnel only. If you try to do it yourself you will void the warranty.

  In my opinion, you should contact the nearest Toshiba service provider and ask for help or, at least, good advice what to do about it.

• Satellite 2800-200; is it possible to upgrade the memory and HARD drive capacity

  Hi all

  my computer is a Toshiba Satellite S2800-200 (old) and I wont to ask if it is possible to upgrade memory capacity and disk.

  Thank you

  Of course you can upgrade these laptop parts.
  The laptop seems to be equipped with an internal memory which is not removable.

  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=7168&ft=m&St=3
  According to the website above, you can use only one memory for an upgrade slot.
  You can use the 144-Pin PC100 SODIMM 128 MB module. It's max.

  I m not 100% sure on the HARD drive, but as I m not trunk not the laptop came with 10 GB HARD drive. Generally, a 20 GB HARD drive should be possible.

  Good bye

• Satellite P200-1EE Possible to recover data on the HARD drive by placing it in an envelope?

  P200-1EE does not start after 2 weeks off is the case during a fan installation. Is it possible to remove the hard drive, put it in an enclosure and retrieve the data it contains on another PC? Or can anyone recommend how to recover data from the comfort of my own home?

  Thanks for your help

  I would say that your installation of fan caused this problem in the first place. I would check your installation for loose connectors, cards not seated properly, no fan or heatsinks screws tight etc..

  Everything you did everything by installing the new fan plugged the laptop. The hard disk, in my opinion, is perfectly fine. There is nothing wrong with it.

  Put the suspect hard drive in an enclosed and try to access the data on another PC. You will encounter problems with administrator access to certain folders so you will need to find a way to crack in these areas.

  If you had problems in the first place you probably should have this return to the place of purchase for them to watch.

  I hope that for your sake you have not turned into a frisbee.

  Good luck.

• Is it possible to upgrade the 1 TB HARD drive

  I have a model of retina 13 "early 2015. It has a 256 GB HARD drive and I was wondering if it is possible at this level to 1 TB.

  Thank you.

  The MBP of 2015 early is not a regular HD. Its a blade type SSD PCIe. Although it is technically possible to change, I don't think it all 1 TB blade Type PCIe SSD drives out there to replace it with.

  https://www.iFixit.com/store/Mac/MacBook-Air-13-inch-2015-and-MacBook-Pro-retina - 13-Inch-and-15-Inch-2015-SSD/IF188-108-...

• Installed boot camp at halfway and do not appear in disk utility. But it takes place in the hard drive.

  I am really frustrated and tried to solve the problems of this days no result. Would be very grateful for advice please!

  So I went before partition my MacBook Air using boot camp. It only allowed me to partition of 22 gb because of space constraints. While he was the partitioning, I forced to leave bootcamp as I changed my mind and I wanted to clear more space before partitioning. However, my watch storage now that 22 GB is used up (probably the bootcamp partition). However because I left bootcamp while partitioning, I couldn't find bootcamp on my disk utility partition. How can I delete the bootcamp hidden partition? It takes too much space on my hard drive. Help, please! Thank you very much!

  Same thing here!

  Can someone help us please?

• Possible to move the Pavilion DV5 hard drive to the newer model?

  Hello.

  I have a little old (but LARGE) laptop - DV5 - 1133ca (FS036UA@ABC) that has intermittent problems with the display.

  It blinks and goes sometimes totally blank.  Then I plug in an external monitor and continue to work.  A few days later, he can work or not.  Fix sometimes repositioning the screen slightly with the hinges.  I'm sure it's some sort of cable inside or something.

  In any CASE - due to time and complexity with the upgrade to a new laptop (reloading programs, etc.) and the daily use of it - I was wondering if it was possible to buy a new laptop HP OR a model slightly more recent HP Pavilion (IE. Dv6 and DV7 with a little more power) and simply swap my hard drive.

  I understand that I would have probably to update many of the drivers - but in general would that work?

  Y at - it or the particular models that I should consider to mitigate any possible problems?

  Is this a good solution?

  Thank you for your help in advance.

  Bill

  You are the very welcome, Bill;

  Enter the model number, that you are concerned about the appropriate box on the link below.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?lc=en&DLC=en&cc=us&OS=228&sw_lang=&product=top

  On the right side of the page, click the product information link, then click on the link card product.

  You may need to click another link to product specifications once.

  Now you can see the hardware, the PC is delivered with.  Everything you need to know is the processor... Intel.

• Cannot take possession of the hard drive Partition

  I have a partition on my hard drive to store media. OS is XP home SP3. For some reason, I didn't have full access to certain folders on the partition so I tried to change the permissions for the entire score. I don't remember exactly what I did, but the main thing is that I have more access to the root of the partition. (I can always access all files using the file Explorer). I tried to appropriate the partition via the safe mode and the administrator account, but it won't allow me to take this way. I also tried to merge with the c drive partition using partition magic, but I had an error half way through the process. I suppose that the permissions would not happen. I read on the internet that "you can always take ownership' and I wonder what I'm doing wrong.

  Can someone help me?

  Manually apply permissions to a file or folder, follow these steps. Manually apply permissions, it's something that only advanced users should do because you could end up with unexpected results.

  1. right click on the file or folder and then clickProperties.

  2. click on the tab Security and then clickchange.

  3. If you want to set permissions for a user who is not listed undergroup or user names, click Add, type everyone in the name of the user or group, clickOK, select permissions and then click OK.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folder

  You can also check out the link below.

  http://Windows.Microsoft.com/en-us/Windows7/what-are-permissions

  See the answer of Alex B-

  http://www.Vistax64.com/Vista-General/118340-folder-access-denied-unable-display-current-owner.html

• I have Vista Home Basic. Can I delete old updates? It takes up most of my 80 GB hard drive, my laptop is 5 years old.

  My Toshiba laptop is 5 years old and has a ton of updates.  He has SP2 on board.  I have a 80 GB hard drive, and these updates take almost 40 GB of it.  Can I remove or clean up some of these updates?

  Susan,

  There is no such thing as 'old' updates. They are there to protect against a vulnerability or to provide updates to the o/s.

  The purpose of take away their defeats being there.

  If you need more space, you must put in a bigger hard drive. Or get an external hard drive and put your data on it.

  The cost of discs is extremely low at the moment.

  UTC/GMT is 03:42 Wednesday, July 25, 2012

• is it possible to convert an external hard drive from FAT32 to NTFS?

  I have a WD 1 TB HARD drive with FAT32 extension and I try to copy files larger than 4 GB (which does NOT support the FAT32). I've been looking for a solution and I found that the best solution is converted to NTFS.

  My questions are, is there another way? If there is no other way, is there a possibility of data loss? How to convert?

  Convert to NTFS will not result in data loss (of course, there is always that chance but it is not intended to do and I haven't heard any problems with how it works under Vista) If you follow the instructions below.

  There is no other way if you want to copy the largest filses - only NtFS that will allow.  NTFS is better anyway because it also gives you more options seciurity and is better designed (in addition to being able to handle files of any size).

  Here is the procedure: http://windows.microsoft.com/en-US/windows-vista/Convert-a-hard-disk-or-partition-to-NTFS-format.

  I hope this helps.

  Good luck.

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to take possession of the hard drive since the upgrade to Windows 7?

  I've upgraded to Windows 7 from XP.

  Unfortunately I can't access all the files on my old hard drive that is on my computer as drive E, nor I can access all the files on the external hard drive USB either. He says that access is denied. These readers are related to my old account on my XP system who crashed and died.

  How to "properly" take possession of these other drives on my new Windows 7 system?

  Previously, I tried to do with my user name on the Windows 7 system to have all permissions. It does not work. It changes the attributes of all files and folders on my other readers but once everything is done, I still have the same problem and I am unable to access it.

  I also tried to use a program called "edit permissions" and who did the same thing and I still have the same problem. No method worked.

  Please Microsoft, you designed these operating systems if please explain to me how to take full ownership and control hard 'MY' in my XP system discs so I can access all the 'MY' files and folders?

  Thank you.

  John

  1. In 'My Computer' (or simply 'computer' now), click on the drive and choose Properties.
  2. On the Security tab, click Advanced.
  3. On the owner tab, change the owner to be your username (you will need to search for and select your user name).
  4. Apply the new owner to "all subcontainers" (all files on the disc).
  5. Click OK until all of the settings are saved.
  6. Try to explore the disc again.

• Bridge takes a lot of hard drive space

  Hello world

  IM new to this forum and new also for Photoshop CS6 and everything that surounds it.

  I had a small question which may be simple to you guys but its been annoys me a bit

  I work with bridge this morning and import pictures in it. Then I looked at my hard drive space and he was down about 5 GB. I do not change or do anything special, just imported photos so it would be easier when I start using PS CS6. Is it normal when I import images that it takes up little space on my hard drive. I thought that the bridge was used only to create a link between my photo file and Psalm I then tried to remove the images in Bridge to see if space would come back available, but it didn't. Anyone? Please help me to answer my questions?

  Thank you

  PS: I have 164 GB of free space on my hard drive, if it helps. Thanks again

  Black

  Post edited by: Black147

  What you see is normal.  Once you import pictures Bridge generates a cache file, then you can disply a thumbnail.  Delete the picture will still retain the thumbnail, which is the function of compact cache.

  The options you choose depend on the size of the cache.   Embedded thumbnails takes less space.  If you check generate and save previews of 100% that will really increase the size of the cache folder.

  See this thread for more information on the cache.  http://forums.Adobe.com/thread/1094509?TSTART=0

• Is it possible to synchronize Safari Keychain passwords from my Mac or iPad Safari on my new iPhone 6s

  When I transferred the data and settings from my old iPhone to my new iPhone 6s, none of the Safari passwords came through. The old phone is over now, but the passwords in the keychain of Safari still exist on my Macbook Pro running El Capitan and iPad2, and they seem to be synchronized.  Is it possible to sync my iPhone to sync Mac and iPad?

  Try the settings/iCloud and turn on Safari and set of synchronization.

• When I click on the firefox icon a window pop up me if want want firefox to take control of my hard drive

  If I answer 'NO' Firefox will not start.
  If I answer 'Yes' firefox starts normally, but in addition, the tab 'close', top right of the Firefox screen is filled with black. It works properly if you can remembere exactly where each of the symbols is

  Make sure that Firefox is not set to run as administrator.
  Right click on the desktop Firefox shortcut and choose "Properties".
  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

  • Privilege level: "Run this program as Administrator" should not be selected
  • "Run this program in compatibility mode for:" must not be selected

  Also check the firefox.exe program properties in the program Firefox (C:\Program Files\Mozilla Firefox\) folder.