is it possible to unlock the iphone with touch id while the screen is off?

Similar Questions

• Is it possible to unlock the screen or the mac itself if you close too hard?

  My brother came and smacked down the lid on my MacBook. Now, it's just a black screen. The mac works, as the keyboard lights up, I can type stuff in and it makes noises.

  The screen is broken or is it just something wrong with the mac?

  Yes, looks like the screen is broken or something connected to it. Call your Apple store and make an appointment to check it out for you. They will give you an estimate to fix it for free.

• Unlock the screen

  Hello. I have an application that runs in the background and it goes to forenground when the NFC field is detected. It works fine, but when the screen is locked the NFC field event is also detected and the application is in the foreground, but the screen keeps locked. Until I have unlock the sreen I can't ' see the application. It is possible to unlock the screen in the application? If the answer is Yes, how?

  I don't ' know if it's important but I'm developing Blackberry 7.1.

  Thank you in advance.

  Hello

  You may find it useful to this http://supportforums.blackberry.com/t5/Java-Development/Enable-the-backlight-and-prevent-the-BlackBe...

• Is it possible to pair my iPhone with my car stereo and my hearing aids at the same time.

  Is it possible to pair my iPhone with my car stereo and tooth blue hearing aids at the same time.

  I've never been able to 2 bluetooth devices at the same time work with the phone

  If it is coupled with my car and then he throws the bluetooth headset and vice versa

  Not sure, there is a way to allow both

• App background stops when the screen turns off

  I wrote an Android app with a Service that receives events from the LocationService and the accelerometer and always try now to wear 10 BlackBerry. Tests on a Z10 STL100-2 10.1.0.4181

  Once the unit has remained unchanged for some time, the location listener is not registered, in order to save energy, and re-recorded a trip again.

  Don't worry, this can be disabled via the visible activity. But it must continue with the last State (start/stop) after the reboot.

  I even magically figured out how to add additional permissions for the manifest of BAR: "_sys_android_autostart_service" and "run_when_backgrounded".

  But as soon as the screen turns off, my application stops working. No location or accelerometer case being received. Turn on the display again, everything back to normal.

  It is meant to be a question about the accelerometer, but I could not find in the tracker.

  So my questions are:

  -Is it possible to port Android continue to receive events location when the screen is off?

  -Is it possible to port Android continue to receive events of accelerometer when the screen is off?

  -Will my service to continue to operate if more than 8 Apps began after mine? (And the user did not hit the close button)

  -The "headless" 10.2 mode help? (I currently only test with 10.1, because my service provider has not yet unlocked 10.2)

  -Finally, this would be possible with a native application? (I could port the port iOS... lots of fun...)

  Thank you very much for your help!

  PS: If it's of any interest: I use the plugin V1.6.1 Eclipse/ADT to package and install the bar.

  As reported here as well (and I'm sure in other places)

  http://supportforums.BlackBerry.com/T5/Android-runtime-development/accelerometer-turns-off-when-Scre...

  I'm working on a deal in the next version, similar to what we're doing with location requests (in other words, activate us the background mode if your app acquires a partial wake lock).

  Edit:

  So my questions are:

  -Is it possible to port Android continue to receive events location when the screen is off?

  (Yes, but you must hold a wake lock).

  -Is it possible to port Android continue to receive events of accelerometer when the screen is off?

  (For the moment, no, but I'll change that, so it behaves like location.)  Mind you, this could be used to work on old revisions of the software until the native sensors team added a background of sensor mode which is disabled by default and must be explicitly enabled).

  -Will my service to continue to operate if more than 8 Apps began after mine? (And the user did not hit the close button)

  (There are a lot of thing that matters if your Services happens to run or not, which is not limited to, but includes the number of applications already running and the status of the device memory).

  -The "headless" 10.2 mode help? (I currently only test with 10.1, because my service provider has not yet unlocked 10.2)

  (No, it's a native thing.  Your application is already technically without head)

• Access code is lost as soon as the screen turns off

  When I turn my wrist after that my Apple Watch screen exploded, I need to enter the access code. I turn on the wrist, the screen turns off, I turn back, screen lights up, I need to re-enter the password. And so on and so forth. The watch does not maintain the code.

  I am white white, is not dense hairs on my wrist, no tattoos and I wear the watch very well on my skin.

  The funny thing is: it is a replacement watch, I got today. The other had the same problem, but this is probably because the bottom of the watch with the sensors fell, must have damaged the sensor cable. But this one is brand new.

  Hello

  Make sure the wrist detection is enabled:

  • On your iPhone, in the application of the watch, go to: My Watch (tab) > General > detection of wrist - turn on.

• AT200 crashes playing music and the screen switch off

  Hello

  first of all, I want to apologize for my bad English.
  I ve got an AT-200 and I have this problem: when I listen to music and turn off the screen, the music begins to shake (like when you have a blue screen error in windows) and she don't brokes down.

  I can't unlock the screen, can´t even turn on the screen and wait until the battery is empty. I have updated drivers through the app from toshiba, but that did not work.

  Has anyone here the same problems?

  Your
  Alex

  > It shows the screen Toshiba, but that no loading screens.

  Yes, if this cannot be solved by the hard reset, I recommend this send to service or replace it with another.

• What signal is emitted in the ListView, when one of its cells appears in or from the screen turns off?

  What signal is emitted in the ListView, when one of its cells appears in or from the screen turns off?

  I created listView with custom listItemComponents

  Is there any signal when listItemComponent go to the screen?

  Currently, it is not possible to detect if the cells turns off the screen. Even if you join LayoutUpdateHandler them they will just stop send updates when you go off the screen. I managed to hack a solution using a timer, but I guess that a cleaner approach would more use a ScrollView with CustomControls instead:

  1. get the dimensions of the ScrollView joining ScrollView LayoutUpdateHandler.

  2. attach the LayoutUpdateHandlers to the CustomControls.

  UPD: It is also viewableArea & viewableAreaChanged event scrollView property.

  3. If the controls that were inside the visible area of the ScrollView went outside, raises the event.

  Of course re-use of cell works that way.

  It's so easy to grab the cell on the screen:

  If you use ListItemProvider, updateItem() function is called when the element appears on the screen:

  https://developer.BlackBerry.com/Cascades/reference/bb__cascades__listitemprovider.html

  It will also be called if the data item are updated in the model.

  When the item is created for the first time, createItem() is called.

• Equium A20 fell and the screen turns off always

  Hi, I was using my satellite A20 long (4 years). Never had any problems. Recently he fell and the screen turns off always.

  I can see the toshiba logo and the windows logo also when starting, and even I can enter the BIOS and change the boot order too... but as soon as windows load screen is black. I don't understand

  Anyone with the solution?

  Thanks in advance...

  Hello

  > but as soon as windows load screen is black. I can t understand
  This means that the display output has accidentally changed to an external.

  Have you checked if something would be visible on the second external monitor?
  Select this check box.

  In addition I advise to use the FN + F5 keys to check if you can switch the output back to the internal display.

• Satellite 1800 - 752S - the screen turns off

  Hello world.
  I have a satellite 1800 - 752S.
  Since an ew months ithas a weird problem: the screen turns off. If I press and release the button the lid on what it is, but after that turns off again quickly. OT goes off sometimes immediately, sometimes after a few minutes, or even hours. Sometimes it provides be when I run out of battery and bothers me on AC, sometimes against. It works fine, after I turn sleep or hibernation several times, and after a reboot, it bothers me. I've updated his BIOS for the lates on this site, which would not help. I guess it's a hardware problem, because it's the same problem under Linux, and I tried to install different versions of drivers and windows (not only the one of the recovery CD). Anyone have the same problem before. Any help will be appreciated.
  Thank you very much
  Roman

  Hello

  I think you're right, it's a hardware problem. But to be sure, try connecting an external monitor. If it works without problem while laptops, screen turns off, then it must be a hardware failure.

  I guess it's a problem with the FL inverter. You have to give your machine a service partner Toshiba for repair.

  Good bye

• Anyway continue Voiceover if the screen turns off?

  Hello world

  I use Voiceover to read eBooks for me, but the voice-over goes out once the auto lock turns off the display.

  Is it possible to do the Voiceover to continue even if the screen turns off?

  Thanks for your help!

  Hi Dionysus17,

  AFAIK the only way to solve this problem is to disable the auto-lock on your iPad. To do this, go to settings > General > lock and from here you can choose when you want to stay for before your locks iPad screen.

  Hope this helps,

  Aaron

• Yoga 2 pro 13'3 andro tab stops automatically when the screen is off & dosnt start evn battery is30 - 80%

  Hello

  I am facing this problem with Yoga 2 pro 13'3 pellets. It stops automatically when the screen is off and dosnt start until it is connected to the charger and press the same power button 30 to 80% battery. I don't know what it is. This happens every time

  No help for it?

  
  

• How can I get the screensaver to stop after a few minutes, while the screen turns off.

  original title: computer sleeps

  I leave my computer on all night.  When I'm done with it for the day, after 5 minutes, the screen saver turns on.  How can I get the screensaver to stop after a few minutes, while the screen turns off.  What we call that?  Sleep is - this Mode?  Hibernate? Thank you!

  Hi miztex37,

  ·         You want to put the computer in sleep mode?

  See the following article to see if it helps.

  Microsoft Windows XP - automatically put your computer into standby mode

  See also:

  Microsoft Windows XP - manually put your computer in sleep mode

• Bluetooth freezes when the screen turns off

  Having a problem with the Bluetooth on my pre. I coupled it with a Plantronics Voyager 855. Initial pairing works very well, but after the screen on the pre turns off, the connection goes bad. When I turn the screen back on, the Bluetooth application on the phone always displays the connected headset, but it is not. If I try to play music, there is no sound, and if a call comes in, I can hear the person on the phone, and not on the helmet.

  About 30-45 seconds after the screen turns off, I hear the high tone of the headset which means that it has lost connection. I don't think that the headset is bad. It worked very well with my previous phone.

  If I have music when the screen turns off, the connection is very good. It's like, when there is no active communication between the phone and the headset, and the screen turns off, the bluetooth on the phone goes into a blocked State. I can restore the connection by turning off bluetooth on the phone and then on again. It reconnects to the helmet, until the next time the screen turns off.

  I tried this to get a better idea of the problem...

  If I remove helmet > disable bluetooth phone > turn on bluetooth on the phone > put the headset in pairing mode, it pairs fine.

  If I remove helmet > disable bluetooth phone > turn on bluetooth on the phone > turn off the screen > wait 45 sec > turn on the screen > put the headset in pairing mode, then it does not.

  Again, it is like turning off the screen causes the bluetooth of the phone hang. Given that the screen turns off fairly quickly, I basically disable bluetooth phone and back on every time I want to use it.

  Any thoughts?

  My problem is solved.  Turns out that I had a defective unit.  He traded last night, and it works fine now.  Got the yellow box this time.  First of all, we had the black cover.

  The swap was a little complicated.  I bought in a store of absolute Wireless in Garner, North Carolina.  It is a reseller of third party.  They did it to a Sprint service center to have a technician "certify" the default before they would replace it by car through the city.  And of course, the service center couldn't do the replacement, so I had to go back through the city to the point of purchase after they certified it.  Best of all, the procedure of "certification" involved explaining the problem to the technician for about a minute, she agreed with me that it was malfunctioned and his writing his employee with the ID on the back of a business card to bring back me to the first shop.  She has not yet turn the phone on itself.  She said pretty much the guy to the absolute Wireless has been a * beep * by sending me to it in the first place b/c, we could just do this by phone.  PITA BREAD.  But I suppose it is, that's what I to do not buy directly from Sprint.

• Connection Bluetooth SPP suspended when the screen turns off

  Hello

  I have a weird behavior of my application connected to Bluetooth.

  The Bluetooth of my application part is identical to the bluetoothchatspp. The connection is made in this way:

  bt_device_init (BTControllerCallback);
  bt_spp_init();

  bt_spp_open (m_remoteAddress.toAscii (). Data(), (char *) SPP_SERVICE_UUID, false);

  using

  SPP_SERVICE_UUID as '00001101-0000-1000-8000-00805F9B34FB '.

  If I disable the screen timeout with this qml command "Application.mainWindow.screenIdleMode = 1" then I can send and receive data via SPP for hours.

  Now, if the screen times out, exactly 10 sec after the time-out period (regardless of the timeout settings is), the BT link is suspended which means no data are sent and received. I measured this interval using the system clock and catch the signal with this command:

  connectResult = QObject::connect (bb::cascades:Application:instance (), SIGNAL (asleep ()), this, SLOT (onAsleep ()));

  Once the screen is again (make a shot for example) then the resumption of transfer of data without breaking the BT link.

  Is there a feature suspending BT SPP link when saving the screen turns off?

  I need to read stream data from my sensors so I need to disable this feature.

  You have the

  run_when_backgrounded
  

  authorization to the handle bar?