Is it possible to use 667 MHz Ram for Satellite A100-233?

Similar Questions

• Question of upgrading RAM for Satellite A100-165

  Hello.

  II have a Satellite A100-165 (PSAA9E-00V00HFR)
  He accepts a 2 GB SO-DIMM?

  Your laptop can handle with 4 GB of RAM, and what you need is DDR2 533/667 MHz RAM module.
  Rams compatible homepage of Kingston. You will find the exact reference.

  Please do not use some cheap products.

• PC2-5300 667 Mhz RAM for Qosmio F30-141?

  Can I use a PC2-5300 Ram on my Qosmio F30?
  I want to upgrade my ram and I prefer PC2-5300 instead of PC2-4200.
  On the toshiba homepage I didn't understand, but in corsair.com, they have a compatible ram research research for your pc or laptop and he said I can use ram PC2-5300.

  So maybe someone here can enlighten me please.

  Hi Reaver,

  I wonder if your machine is really working with a front end bus 667 Mhz. I mean okay: the RAM but really works with this higher FSB?

  Need an answer and some evidence on this issue. :)

  THX

• Is PA3512U-1M1G 1 GB memory PC2 DDR2 667 MHz compatible with Satellite A100-847

  Is PA3512U - 1M1G 1 GB memory PC2 DDR2 (667 MHz), RoHS compliance version compatible with TOSHIBA SATELLITE A100-847?

  Hello

  Please visit the page European Toshiba under http://eu.computers.toshiba-europe.com > Products > Options & accessories

  It has listed all the compatible memory modules for your laptop model Satellite A100.

  By the way: as far as I know all the compatible memory modules are 533 MHz module.

• Maximum capacity of RAM for Satellite A100 PSAANH-04Y03F?

  Hello

  I finally decided to update my A100 ram which I bought in 2007.
  The problem is that I don't how what is the maximum capacity.

  I suspect that it is 2 GB, but I'm curious to know if it will take 4GB.
  The reason why I have not found information me is because I have no idea what model is my A100.

  It says ' Satellite A100 SYSTEM UNIT MODEL No. * PSAANH-04Y03F * ' on the bottom of the laptop.
  Google search that gives me 0 search results :/

  Help would be greatly appreciated!

  This chipset was built in Notepad?
  The max RAM depends on the chipset.
  You can use a tool like * Everest Home Edition * to check the chipset.
  Then you could search properties chipset.

• Question about RAM for Satellite A100

  No standard memory pa3412u - 2M 51 (512 MB 533 MHz) with PA3411U-2M1G (1 GB 533 MHz) will work properly?

  My laptop is satellite A100-847

  Hello

  Both modules must support the same specifications! But you can mix sizes of 512 MB and 1 GB module
  DDR2 533 MHz PC2-4200 modules are compatible with the Satellite A100.

• Brand special RAM for Satellite A100 (PSAA9)?

  Hello

  I have an A100-504 Satellite (PSAA9) with only 1 GB of RAM. CPUZ is a module of Hyundai HYMP512S64BP8-C4 PC2-4300.

  I want to switch to 2 GB and I was wondering if I have to buy a special kind of RAM? What I should also buy Hyundai RAM or can it be a different brand? What about specifications? What RAM modules would be the best in combination with Vista and that Hyundai HYMP512S64BP8 - C4 1 GB module?

  Thank you very much for your help!

  Bob

  Hello Bob

  There's not a lot of philosophy.
  The best thing you can do is to use recommended and 100% compatible modules of RAM. According to the specification of the specifications compatible modules are:

  512 MB DDR2-533 PA3412U - 2 M (51)
  1 GB OF DDR2-533 (PA3411U-2M1G)

  Good bye

• Extension of RAM for Satellite A100-756

  Hi all

  I want to expand my ram to 2 GB memory... Can anyone help to decide what memory to buy? 2 x 1 GB or 2 GB one?

  Anyone know if this memory is compatible with my chipset?

  Kingston HyperX 675 Mhz 1 GB DDR 2 memory no ECC computer

  Thank you very much.
  I'd appreciate any help and advice.

  Hello

  It s better take 2 x 1 GB, it has something to do with compatibility. So, is this HyperX memory for laptops? I have Kingston HyperX in my office and I didn t know that this series was manufactured for mobile systems, too.

  Can you please post a link where these modules are memory available?

  THX

  Welcome them

• Satellite A200 - 14 d: 533 MHZ front bus 667 mhz RAM equipped?

  Hello!

  I have the following problem! I bought the Satellite A200 - 14 d and on the packaging and in the shop was written with 1 GB DDR2 667 mhz RAM.
  When it came time for the upgrade, I put Everest and CPU - Z to find out exactly what to buy.

  I was amazed when I saw that my FSB 533 MHZ. The strangest thing is that RAM is really at 667 mhz, but what for?
  Now I think that's not quite legal. When I bought this laptop, I thought that it is with 667 mhz and I never doubted because it is written on the box that this computer is with 667 mhz ram!

  Please give me some advice what do I do?
  Advanced thanks!

  > was amazed when I saw that my FSB 533 MHZ. The strangest thing is that RAM is really up to 667 MHz, but what for?

  Why is it strange to you.
  This is nothing unusual. Is that you can also use 667 MHz modules! But they will run at 533 MHz due to the speed of the FSB. As I see it s clear to you.
  Always it is that there are several A200 series and some of the Satellite A200 supports FSB 667 Mhz.
  But it seems that all mobile A200 were equipped with RAM 667 MHz modules and they are certainly better than 533 Mhz modules.

  Best regards

• Satellite A100-847 does support 667 MHz RAM

  The A100-PSAA9 (A100-847) supports the 667 MHz RAM? The FSB is 667 MHz, but the laptop comes with 533 MHz RAM and everywhere that I looked for upgrades of RAM I've seen 533 MHz for this model.

  memory Finder: http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=25716&ft=m&st=3

  Hello

  It should be able to use the Ram 667 MHz module, but the difference between the 533 MHz and 667 MHz is not noticeable.
  I think the 533 MHz module is great and you are on the good side, if you use the modules to recommend Toshiba.

• Is it better to have GB usable (at speed = 667 mhz) RAM 3.00 or 4.00 GB of RAM (with usable speed only 2.99 GB = 800 mhz?)

  Original title: RAM

  Is it better to have GB usable (at speed = 667 mhz) RAM 3.00 or 4.00 GB of RAM (with usable speed only 2.99 GB = 800 mhz?) I apologize if this sounds like a newbie question, but I'm not too familiar with that.

  3 GB sticks are 5300 and sticks of 4 GB 6400, if it matters?)

  Hello

  If you have Windows 32-bit instead of 64-bit so not all 4 GB cannot be used.

  As I said, download the 4 GB at 800.

  Rob - SpiritX

• Can satellite A100-784 - I register at 667 MHz RAM?

  Hello

  I would change my modules of memory in my A100 - 784 (PSAANE).
  Can I apply 667 MHz RAM instead of the original (533 MHz)?

  Initially, I have 1 GB (512 + 512) DDR2 533 MHz. I put in 2 GB (1 GB + 1 GB) DDR2 667 MHz.

  Can I do it?

  Thank you very much for your answer in advance!

  Hello

  You can do it.
  The point is that the speed of the RAM depends on the bus (FSB) front.
  If the FSB supports only 533 Mhz then your modules would go only to 533 Mhz even if the modules support 667 Mhz.

  If you n t know how fast is supported by the FSB then install a tool of free diagnosis, for example; Everest home edition and check out the unique values.

  See you soon

• updated 32-bit to 64-bit vista if I can use the extra ram for FSX. but many download problems.

  Hello

  I'm a nut FSX but have very IT limited knowledge. I wanted to achieve the best result for FSX (this 2 me not a game cos I can afford is more to fly the flat light where I 300hours and noticed a true likeness in fsx to plans I stole) so I bought the new PC i7/920 call t0 3.6 ghz. NVIDIA gtx285. 6 GB/ram/166 corsair.and installs 3 x monitor @22 inch with TrackIR 5.I thought I was going to enter Heaven FSX. However majority or all of the FSX CD I my system 32 bits do not appear in the installation of 100%. I appreciate the new way of loading FSX in 64-bit is different from 32-bit, etc.. My main complaint is I lose my GPS function on mission downloads and it's not good. I understand there is a way to increase the use of the ram for 32-bit (works 100%) where there has never been a problem, but seems very complicated. I currently use the resolution of 1980 but 3 screen in place will be allowed to 1680 etc.. HOW can I REACH 100% DOWNLOAD WITH 64 BIT as I can with 32 bits, which is limited to 3 GB of ram. Any FSX readers in addition to my download problems, what I need to have an incredible fast pc including 4 times cheaper than my cp very dear son. FSX is super super smooth with cadence to the max

  Hey booleyz,

  Vista 64 bit is compatible with the game and you should get all the functions. When you download missions and if missing the GPS function, imply that there are no required files on the PC for the game. I suggest that you uninstall and reinstall the game once and see if it works.

  You can also try to reduce the graphic details in the game Options.

  Here is a link I found that contains information about this:
  http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.simulators&tid=4b308963-5394-47f0-a8e2-7478ec338622&cat=en_US_f5c26c4c-9442-4038-ab1e-b3d34006e2de&lang=en&cr=US&sloc=en-us&m=1&p=1

  I hope this information helps.

  Thank you.

  Kind regards

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Is it possible to use workflows to Train for the old masters in detail for CRUD operations

  Hello

  I use Jdev 11.1.2.3

  I have a use case of the implementation of paintings by master detail (a master and 3 Details) and I want the CRUD operation will end only when all the data are introduced. It is therefore possible to use workflows to train for this use case.

  Thank you

  The pb is solved, I just replace the Taskflow newPersonalDetail by a simple point of view and for the createInsert I am using invokeAction in the pageDef:

  Thank you

• I use a Mac.  I "upgraded" to of LR4 LR5.  I don't want to be a member of the "creative cloud."  I just want to use the software that I bought, more precisely to load on my SmugMug account.  Is it possible to use an add-on for this?  Opening and L

  I use a Mac.  I "upgraded" to of LR4 LR5.  I don't want to be a member of the "creative cloud."  I just want to use the software that I bought, more precisely to load on my SmugMug account.  Is it possible to use an add-on for this?  Opening and LR4 were easy, but I think it's impossible without subscribing to CC.

  do you mean that you get a page Adobe Adobe ID, wondering like that? If you have followed my second just method?

  

  If this is the case, this isn't an obligation to subscribe to the CC, but just a completely - a free Adobe ID, email and a password which can identify you.

  In fact, it is the same name of username/password used to log-in on this forum.